1. Fundamentals of structural intermetallics foreword

   • Young-Won Kim
   • Kwai S. Chan
   • Vijay K. Vasudevan

   EditorialNotes Pages: 2041 - 2041

2. A review of very-high-temperature Nb-silicide-based composites

   • B. P. Bewlay
   • M. R. Jackson
   • J. -C. Zhao

   ReviewPaper Pages: 2043 - 2052

3. Influence of alloying elements on the kinetics of massive transformation in gamma titanium aluminides

   • U. Prasad
   • M. C. Chaturvedi

   OriginalPaper Pages: 2053 - 2066

4. Influence of oxygen on phase transformations in a Ti-48 At. pct Al alloy

   • Williams Lefebvre
   • Alain Menand
   • Annick Loiseau

   OriginalPaper Pages: 2067 - 2075

5. Development and elemental powder metallurgy of a Y-containing two-phase TiAl alloy

   • Y. Wu
   • S. K. Hwang
   • J. W. Morris Jr.

   OriginalPaper Pages: 2077 - 2087

6. Effects of ternary additions on the thermoelastic martensitic transformation of NiAl

   • S. H. Kim
   • D. M. Wee
   • M. H. Oh

   OriginalPaper Pages: 2089 - 2095

7. Theory of interface properties for carbide precipitates in TiAl

   • R. Benedek
   • D. N. Seidman
   • C. Woodward

   OriginalPaper Pages: 2097 - 2101

8. Work-hardening and recovery mechanisms in gamma-based titanium aluminides

   • J. D. H. Paul
   • F. Appel

   OriginalPaper Pages: 2103 - 2111

9. Microstructural effects on the tensile properties and deformation behavior of a Ti-48Al gamma titanium aluminide

   • G. Babu Viswanathan
   • Michael J. Mills
   • Vijay K. Vasudevan

   OriginalPaper Pages: 2113 - 2127

10. Precipitation strengthening in K5-series γ-TiAl alloyed with silicon and carbon

    • M. Karadge
    • P. I. Gouma
    • Y. -W. Kim

    OriginalPaper Pages: 2129 - 2138

11. Study of microstructure and solute partitioning in a cast Ti-48Al-2Cr-2Nb alloy by quenching during directional solidification technique

    • M. Charpentier
    • D. Daloz
    • M. Grange

    OriginalPaper Pages: 2139 - 2148

12. Creep behavior of TiAl alloys with enhanced high-temperature capability

    • F. Appel
    • J. D. H. Paul
    • U. Lorenz

    OriginalPaper Pages: 2149 - 2164

13. High-temperature deformation behavior of a gamma TiAl alloy—Microstructural evolution and mechanisms

    • Jeoung Han Kim
    • Young Won Chang
    • Tae Kwon Ha

    OriginalPaper Pages: 2165 - 2176

14. Primary creep behavior of Ti-48Al-2W as a function of stress and lamellar morphology

    • D. Y. Seo
    • L. Zhao
    • J. Beddoes

    OriginalPaper Pages: 2177 - 2190

15. Microstructure stability during creep deformation of hard-oriented polysynthetically twinned crystal of TiAl alloy

    • Hee Y. Kim
    • K. Maruyama

    OriginalPaper Pages: 2191 - 2198

16. Mutual effects of hydrogenation and deformation in Ti-Nb alloys

    • D. Zander
    • D. L. Olson
    • D. Eliezer

    OriginalPaper Pages: 2199 - 2206

17. Compressive strength and creep properties of Ir-Nb-Zr alloys between 1473 and 2073 K

    • Y. Yamabe-Mitarai
    • Y. Gu
    • H. Harada

    OriginalPaper Pages: 2207 - 2215

18. Creep behaviors of an Ir-23Nb alloy at ultra-high temperatures

    • Y. F. Gu
    • Y. Yamabe-Mitarai
    • H. Harada

    OriginalPaper Pages: 2217 - 2221

19. Mechanical and physical properties of high-velocity oxy-fuel-sprayed iron aluminide coatings

    • T. C. Totemeier
    • R. N. Wright
    • W. D. Swank

    OriginalPaper Pages: 2223 - 2231

20. Effect of carbon addition on the strength and creep resistance of FeAl alloys

    • R. S. Sundar
    • S. C. Deevi

    OriginalPaper Pages: 2233 - 2246

21. Fundamental considerations for the development of oxidation-resistant alloys and coatings based on γ-TiAl

    • L. Singheiser
    • L. Niewolak
    • U. Flesch

    OriginalPaper Pages: 2247 - 2251

22. Effect of ion implantation on the oxidation resistance of TiAl

    • M. Yoshihara
    • S. Taniguchi
    • Y. -C. Zhu

    OriginalPaper Pages: 2253 - 2261

23. Oxidation behavior and transmission electron microscope characterization of Ti-44Al-x Nb-2(Ta,Zr) alloys

    • John C. Woo
    • S. K. Varma
    • R. N. Mahapatra

    OriginalPaper Pages: 2263 - 2271

24. Computation and validation of weld pool dimensions and temperature profiles for gamma TiAl

    • K. B. Bisen
    • M. Arenas
    • V. L. Acoff

    OriginalPaper Pages: 2273 - 2279

25. Isothermal section of the ternary Sn-Cu-Ni system and interfacial reactions in the Sn-Cu/Ni couples at 800 °C

    • Chao-Hong Wang
    • Sinn-Wen Chen

    OriginalPaper Pages: 2281 - 2287

26. Microstructural characterization of a platinum-modified diffusion aluminide bond coat for thermal barrier coatings

    • M. W. Chen
    • K. J. T. Livi
    • P. K. Wright

    OriginalPaper Pages: 2289 - 2299

27. A method for measuring microstructural-scale strains using a scanning electron microscope: Applications to γ-titanium aluminides

    • Nicholas Biery
    • Marc de Graef
    • Tresa M. Pollock

    OriginalPaper Pages: 2301 - 2313

28. Relationships of fracture toughness and dislocation mobility in intermetallics

    • Kwai S. Chan

    OriginalPaper Pages: 2315 - 2328

29. Grain-size effects on tensile behavior of nickel and AISI 316L stainless steel

    • X. Feaugas
    • H. Haddou

    OriginalPaper Pages: 2329 - 2340

30. Microstructure and texture of hot-rolled Cb-Ti and V-Cb microalloyed steels with differences in formability and toughness

    • R. D. K. Misra
    • K. K. Tenneti
    • G. Tither

    OriginalPaper Pages: 2341 - 2351

31. Measurement and modeling of creep in open-cell NiAl foams

    • Andrea M. Hodge
    • David C. Dunand

    OriginalPaper Pages: 2353 - 2363

32. A mushy-zone rayleigh number to describe interdendritic convection during directional solidification of hypoeutectic Pb-Sb and Pb-Sn alloys

    • S. N. Tewari
    • R. Tiwari

    OriginalPaper Pages: 2365 - 2376

33. Microstructure evolution during alpha-beta heat treatment of Ti-6Al-4V

    • S. L. Semiatin
    • S. L. Knisley
    • F. Zhang

    OriginalPaper Pages: 2377 - 2386

34. On the wear of a cobalt-based superalloy in zinc baths

    • K. Zhang
    • N. Y. Tang

    OriginalPaper Pages: 2387 - 2396

35. The effect of stress state on cavity initiation during hot working of Ti-6Al-4V

    • P. D. Nicolaou
    • R. L. Goetz
    • S. L. Semiatin

    Communications Pages: 2397 - 2400