1. Phase constitution and lattice parameter relationships in rapidly solidified (Fe_0.65Mn_0.35)_0.83 Al_0.17-xC and Fe₃Al-xC pseudo-binary alloys

   • Woong K. Choo
   • Kwan H. Han

   OriginalPaper Pages: 5 - 10

2. Magnetic contributions to the thermodynamic functions of pure Ni, Co, and Fe

   • Ying-Yu Chuang
   • Rainer Schmid
   • Y. Austin Chang

   OriginalPaper Pages: 153 - 165

3. Driving force for discontinuous coarsening in a Ni-Al-Mo base superalloy

   • A. W. Funkenbusch
   • T. A. Stephenson
   • H. Fraser

   OriginalPaper Pages: 11 - 16

4. The structure of R(_1-x)Ga₂(_{1- x})(^{0 < x < 0.33)} and its relation to RGa₆ (R = Rare Earth Element) and Ga

   • G. Kimmel
   • D. Dayan
   • J. Pelleg

   OriginalPaper Pages: 167 - 171

5. Serrated grain boundary formation potential of Ni-based superalloys and its implications

   • A. K. Koul
   • R. Thamburaj

   OriginalPaper Pages: 17 - 26

6. A Mössbauer spectrometry study of the mechanical transformation of precipitated austenite in 6Ni steel

   • B. Fultz
   • J. W. Morris

   OriginalPaper Pages: 173 - 177

7. Impurity effect on cube texture in pure aluminum foils

   • T. Suzuki
   • K. Arai
   • Y. Nakamura

   OriginalPaper Pages: 27 - 36

8. Role of alloying elements in phase decomposition in alnico magnet alloys

   • Shi Ming Hao
   • K. Ishida
   • T. Nishizawa

   OriginalPaper Pages: 179 - 185

9. Thermal gradients, strain rate, and ductility in sheet steel tensile specimens

   • Robert A. Ayres

   OriginalPaper Pages: 37 - 43

10. X-ray diffraction and resistivity studies of titanium-molybdenum alloys

    • C. Hayman
    • W. W. Gerberich

    OriginalPaper Pages: 187 - 195

11. Mechanical properties of nitrogen-ferrite

    • P. Ferguson

    OriginalPaper Pages: 45 - 50

12. Criterion for predicting the morphology of crystalline cubic precipitates in a cubic matrix

    • R. Schneck
    • S. I. Rokhlin
    • M. P. Dariel

    OriginalPaper Pages: 197 - 202

13. Dynamic recrystallization during creep in a 45 Pct Ni-35 pct Fe-20 pct Cr alloy system

    • A. K. Koul
    • J. -P. A. Immarigeon

    OriginalPaper Pages: 51 - 57

14. Fluid flow and weld penetration in stationary arc welds

    • Sindo Kou
    • D. K. Sun

    OriginalPaper Pages: 203 - 213

15. Effects of hydrogen on some mechanical properties of vanadium-titanium alloys

    • C. V. Owen
    • T. J. Rowland
    • O. Buck

    OriginalPaper Pages: 59 - 66

16. Microstructure and mechanical properties of Fe-Ni-Cr-Al steel wires produced by in-rotating-water spinning method

    • A. Inoue
    • H. Tomioka
    • T. Masumoto

    OriginalPaper Pages: 215 - 226

17. Measurement and evaluation of the anisothermal softening of austenite after hot deformation

    • A. Streißelberger
    • R. Kaspar
    • O. Pawelski

    OriginalPaper Pages: 67 - 72

18. Effect of silicide precipitation on tensile properties and fracture of alloy Ti-6Al-5Zr-0.5Mo-0.25Si

    • C. Ramachandra
    • Vakil Singh

    OriginalPaper Pages: 227 - 231

19. Mechanical properties of 0.40 pct C-Ni-Cr-Mo high strength steel having a mixed structure of martensite and bainite

    • Yoshiyuki Tomita
    • Kunio Okabayashi

    OriginalPaper Pages: 73 - 82

20. On macroscopic and microscopic analyses for crack initiation and crack growth toughness in ductile alloys

    • R. O. Ritchie
    • A. W. Thompson

    OriginalPaper Pages: 233 - 248

21. Modified heat treatment for lower temperature improvement of the mechanical properties of two ultrahigh strength low alloy steels

    • Yoshiyuki Tomita
    • Kunio Okabayashi

    OriginalPaper Pages: 83 - 91

22. Fatigue crack deflection and fracture surface contact: Micromechanical models

    • S. Suresh

    OriginalPaper Pages: 249 - 260

23. Thermochemistry of binary liquid gold alloys: The systems (Au + Cr), (Au + V), (Au + Ti), and (Au + Sc) at 1379 K

    • O. J. Kleppa
    • Letitia Topor

    OriginalPaper Pages: 93 - 99

24. A two-sublattice model for molten solutions with different tendency for ionization

    • Mats Hillert
    • Bo Jansson
    • John ågren

    OriginalPaper Pages: 261 - 266

25. Investigation of stress corrosion crack growth in Mg alloys using J-integral estimations

    • G. Abramson
    • J. T. Evans
    • R. N. Parkins

    OriginalPaper Pages: 101 - 108

26. Determination of the coordination number of liquid metals near the melting point

    • Anthony L. Hines
    • Hugh A. Walls
    • Kanhaiyalal R. Jethani

    OriginalPaper Pages: 267 - 274

27. Microstructural changes in 1Cr-0.5Mo steel after 20 years of service

    • V. A. Bišs
    • T. Wada

    OriginalPaper Pages: 109 - 114

28. Sulfidation under atmospheric conditions of Cu-Ni, Cu-Sn, and Cu-Zn binary and Cu-Ni-Sn and Cu-Ni-Zn ternary systems

    • T. E. Graedel
    • J. T. Plewes
    • R. C. Stoffers

    OriginalPaper Pages: 275 - 284

29. Effects of gaseous hydrogen on fatigue crack growth in pipeline steel

    • H. J. Cialone
    • J. H. Holbrook

    OriginalPaper Pages: 115 - 122

30. Effect of cold work on stress corrosion cracking behavior of types 304 and 316 stainless steels

    • P. Muraleedharan
    • H. S. Khatak
    • P. Rodriguez

    OriginalPaper Pages: 285 - 289

31. Subcritical intergranular crack growth rates and thresholds of Fe and Fe + Sb

    • R. H. Jones
    • M. T. Thomas
    • D. R. Baer

    OriginalPaper Pages: 123 - 131

32. Hot corrosion of B−1900 in CaSO₄/Na₂SO₄ salt mixtures in reducing atmospheres

    • S. F. C. Stewart
    • S. R. Shatynski

    OriginalPaper Pages: 291 - 297

33. An effect of chemisorbing surface reaction poisons on the transition from internal to external oxidation

    • Gregory Luckman
    • Richard S. Polizzotti

    OriginalPaper Pages: 133 - 136

34. A new method for determining the defocusing correction for crystallographic texture measurement

    • C. K. Chow

    Communications Pages: 299 - 300

35. On the arrangement of monovariant lines in two-dimensional potential phase diagrams

    • Mats Hillert

    Communication Pages: 137 - 139

36. A note on grain boundary diffusion controlled cavity growth during elevated temperature fatigue

    • N. Y. Tang
    • A. Plumtree

    Commmunication Pages: 300 - 302

37. Isothermal para-equilibrium phase diagrams for ternary systems

    • W. A. Oates
    • Ted B. Flanagan

    Communication Pages: 139 - 142

38. Sulfation of Y₂O₃ and HfO₂ in relation to MCrAl coatings

    • R. L. Jones
    • D. B. Nordman
    • S. T. Gadomski

    OriginalPaper Pages: 303 - 306

39. Isotope separation during thin film compound growth

    • J. P. Stark

    Communication Pages: 142 - 144

40. The effect of cold rolling on the fatigue properties of Ti-6Al-4V

    • S. Z. Liu
    • K. Minakawa
    • A. J. Mcevily

    Communication Pages: 144 - 145

41. The deformation-path dependence of fracture strain in 304L stainless steel

    • S. L. Semiatin
    • J. H. Holbrook
    • M. C. Mataya

    Communication Pages: 145 - 148