1. Effect of temperature variations on the bond behavior of FRCM applied to masonry

   • Francesca Ferretti
   • Matteo Canestri
   • Claudio Mazzotti

   Original Article Open access 13 July 2022 Article: 166

   

2. Effect of bitumen composition on micro-structure and rheological properties of styrene–butadiene–styrene modified asphalt before and after aging

   • Zuzhong Li
   • Jinhai Zeng
   • Yongchang Wu

   Original Article 13 July 2022 Article: 165

   

3. Effect of gamma irradiation on the mechanical properties of carbonation reaction products in mortar

   • Daria Jóźwiak-Niedźwiedzka
   • Mariusz Dąbrowski
   • Michał A. Glinicki

   Original Article 12 July 2022 Article: 164

   

4. The influence of long blending duration on physical and chemical properties of dual polymer modified asphalt binder with rejuvenator

   • Maxwell Staver
   • Ali Arabzadeh
   • R. Christopher Williams

   Original Article 11 July 2022 Article: 163

   

5. Grain angle determination of silver birch by laser light scattering and tensile fracturing

   • Steven Collins
   • Gerhard Fink

   Original Article Open access 10 July 2022 Article: 162

   

6. Experimental study and mechanism analysis on the basic mechanical properties of hydraulic basalt fiber asphalt concrete

   • Anxiong Long
   • Xinjian Sun
   • Jiwei Wang

   Original Article 09 July 2022 Article: 161

   

7. Factors controlling pre- and post-peak behavior of asphalt mixtures containing RAP in the SCB test

   • Jiwang Jiang
   • Hui Chen
   • Hussain U. Bahia

   Original Article 06 July 2022 Article: 160

   

8. The viscoelastic transition: a tool to determine equivalent binder grade

   • Elaine S. Goosen
   • Kim J. Jenkins

   Original Article 06 July 2022 Article: 159

   

9. Modelling microalgae biofouling on porous buildings materials: a novel approach

   • Enrico Quagliarini
   • Benedetta Gregorini
   • Marco D’Orazio

   Original Article Open access 01 July 2022 Article: 158

   

10. Correction to: Experimental investigation and analytical modelling of the roughness and bonding agent influence on the old-to-repair concrete interfacial bonding strength

    • Vasileios G. Apostolinas
    • Kyriaki S. Galopoulou
    • Avraam A. Konstantinidis

    Correction 29 June 2022 Article: 157

11. The efficiency of recycled glass powder in mitigating the alkali-silica reaction induced by recycled glass aggregate in cementitious mortars

    • Aziz Hasan Mahmood
    • Sumaiya Afroz
    • Stephen J. Foster

    Original Article Open access 29 June 2022 Article: 156

    

12. Constitutive behaviour and modelling of hybrid basalt–polypropylene fibre-reinforced concrete considering coupling effect of fibre reinforcement and mechanical damage

    • Qiang Fu
    • Zhenhua Wang
    • Ditao Niu

    Original Article 28 June 2022 Article: 155

    

13. Preparation and properties of self-healing cementitious composites using aligned glass tubes

    • Depeng Zhang
    • Xiaowei Wang
    • Jian Zhou

    Original Article 27 June 2022 Article: 154

    

14. Durability of concretes exposed to high concentrations of CaCl₂ and MgCl₂

    • Nima Hosseinzadeh
    • Luca Montanari
    • Prannoy Suraneni

    Original Article 26 June 2022 Article: 153

    

15. Biocement treatment for upcycling construction and demolition wastes as concrete aggregates

    • Abhijit Mistri
    • Navdeep Dhami
    • Abhijit Mukherjee

    Original Article Open access 24 June 2022 Article: 152

    

16. Fresh properties of concrete containing calcined clays: a review by RILEM TC-282 CCL

    • Yuvaraj Dhandapani
    • Shiju Joseph
    • Kyle A. Riding

    RILEM TC-282 CCL, CALCINED CLAYS AS SUPPLEMENTARY CEMENTITIOUS MATERIALS 23 June 2022 Article: 151

    

17. Physicochemical investigation of Portland cement pastes prepared and cured with seawater

    • Yangyang Zhang
    • Yanjie Sun
    • Chi Sun Poon

    Original Article 23 June 2022 Article: 150