Volume 53, issue 6, December 2020

22 articles in this issue

Influence of geometrical parameters on the splitting forces in textile-reinforced concrete

Authors
- Philipp Preinstorfer
- Benjamin Kromoser
- Content type: Original Research
- Open Access
- Published: 11 December 2020
- Article: 152
Combined effects of vertical spacers and segregation on mass transport properties of reinforced concrete

Authors (first, second and last of 6)
- F. Muslim
- H. S. Wong
- N. R. Buenfeld
- Content type: Original Article
- Open Access
- Published: 08 December 2020
- Article: 151
Local elastic moduli of simple random composites computed at different length scales

Authors
- E. J. Garboczi
- P. Lura
- Content type: Original Article
- Open Access
- Published: 03 December 2020
- Article: 150
Recyclability, durability and water vapour adsorption of unstabilised and stabilised compressed earth bricks

Authors (first, second and last of 4)
- Agostino Walter Bruno
- Blake Scott
- Céline Perlot
- Content type: Original Article
- Open Access
- Published: 01 December 2020
- Article: 149
Analytical model for masonry walls strengthened with vegetal fabric reinforced cementitious matrix (FRCM) composites and subjected to cyclic loads

Authors
- Luis Mercedes
- Ernest Bernat-Maso
- Lluis Gil
- Content type: Original Article
- Published: 27 November 2020
- Article: 148
A nondestructive guided wave propagation method for the characterization of moisture-dependent viscoelastic properties of wood materials

Authors
- Hamidreza Fathi
- Siavash Kazemirad
- Vahid Nasir
- Content type: Original Article
- Published: 26 November 2020
- Article: 147
Durability of slag-blended cement due to U-phase instability in sulphate environment

Authors (first, second and last of 6)
- Yogarajah Elakneswaran
- Chuang Li
- Toyoharu Nawa
- Content type: Original Article
- Published: 26 November 2020
- Article: 146
Tensile behaviour identification in Ultra-High Performance Fibre Reinforced Cementitious Composites: indirect tension tests and back analysis of flexural test results

Authors
- Francesco Lo Monte
- Liberato Ferrara
- Content type: Original Article
- Open Access
- Published: 26 November 2020
- Article: 145
Retrofitting unreinforced masonry by steel fiber reinforced mortar coating: uniaxial and diagonal compression tests

Authors (first, second and last of 4)
- Sara S. Lucchini
- Luca Facconi
- Giovanni Plizzari
- Content type: Original Article
- Open Access
- Published: 25 November 2020
- Article: 144
Effects of load-induced micro-cracks on chloride penetration resistance in different types of concrete

Authors (first, second and last of 6)
- Nicoletta Russo
- Matteo Gastaldi
- Federica Lollini
- Content type: Original Article
- Open Access
- Published: 24 November 2020
- Article: 143
Flexural strengthening of reinforced concrete beam using a natural fibre reinforced polymer laminate: an experimental and numerical study

Authors
- Chinyere Olufemi Nwankwo
- Anthony Nkem Ede
- Content type: Original Article
- Published: 16 November 2020
- Article: 142
External strengthening of reinforced concrete beam with opening by bamboo fiber reinforced composites

Authors (first, second and last of 5)
- Siew Choo Chin
- Kong Fah Tee
- Jolius Gimbun
- Content type: Original Article
- Open Access
- Published: 11 November 2020
- Article: 141
RILEM TC 247-DTA round robin test: sulfate resistance, alkali-silica reaction and freeze–thaw resistance of alkali-activated concretes

Authors (first, second and last of 15)
- Frank Winnefeld
- Gregor J. G. Gluth
- John L. Provis
- Content type: RILEM TC Report
- Open Access
- Published: 11 November 2020
- Article: 140
Experimental and theoretical study of GFRP hoops and spirals in hybrid fiber reinforced concrete short columns

Authors
- Ali Raza
- Qaiser uz Zaman Khan
- Content type: Original Article
- Published: 09 November 2020
- Article: 139
Effect of bio-stabilizers on capillary absorption and water vapour transfer into raw earth

Authors (first, second and last of 6)
- Simon Guihéneuf
- Damien Rangeard
- Sylvie Prétot
- Content type: Original Article
- Published: 04 November 2020
- Article: 138
Effect of fibre type and content on performance of bio-based concrete containing heat-treated apricot shell

Authors (first, second and last of 6)
- Fan Wu
- Qingliang Yu
- Defeng Liu
- Content type: Original Article
- Open Access
- Published: 28 October 2020
- Article: 137
Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC

Authors (first, second and last of 27)
- Stefanie von Greve-Dierfeld
- Barbara Lothenbach
- Nele De Belie
- Content type: RILEM TC Report
- Open Access
- Published: 22 October 2020
- Article: 136
Lightweight FRC infill wall: in-plane and out-of-plane loading tests

Authors (first, second and last of 4)
- Adriano Reggia
- Alessandro Morbi
- Giovanni A. Plizzari
- Content type: Original Article
- Open Access
- Published: 21 October 2020
- Article: 135
A non destructive testing method for masonry by using UPV and cross validation procedure

Authors (first, second and last of 5)
- E. Vasanelli
- F. Micelli
- M. A. Aiello
- Content type: Original Article
- Published: 21 October 2020
- Article: 134
Effect of early age drying shrinkage on the seismic response of RC structures

Authors (first, second and last of 14)
- Chaimaa Jaafari
- David Bertrand
- Stéphane Grange
- Content type: Original Article
- Published: 21 October 2020
- Article: 133
Methodology to evaluate variations in concrete color caused by white cement substitutions and forming materials

Authors
- Wael A. Megid
- Kamal H. Khayat
- Content type: Original Article
- Published: 16 October 2020
- Article: 132
Identification of the viscoelastic properties of an asphalt mixture using a scanning laser Doppler vibrometer

Authors (first, second and last of 6)
- Navid Hasheminejad
- Cedric Vuye
- Steve Vanlanduit
- Content type: Original Article
- Published: 16 October 2020
- Article: 131

Volume 53, issue 6, December 2020

Influence of geometrical parameters on the splitting forces in textile-reinforced concrete

Combined effects of vertical spacers and segregation on mass transport properties of reinforced concrete

Local elastic moduli of simple random composites computed at different length scales

Recyclability, durability and water vapour adsorption of unstabilised and stabilised compressed earth bricks

Analytical model for masonry walls strengthened with vegetal fabric reinforced cementitious matrix (FRCM) composites and subjected to cyclic loads

A nondestructive guided wave propagation method for the characterization of moisture-dependent viscoelastic properties of wood materials

Durability of slag-blended cement due to U-phase instability in sulphate environment

Tensile behaviour identification in Ultra-High Performance Fibre Reinforced Cementitious Composites: indirect tension tests and back analysis of flexural test results

Retrofitting unreinforced masonry by steel fiber reinforced mortar coating: uniaxial and diagonal compression tests

Effects of load-induced micro-cracks on chloride penetration resistance in different types of concrete

Flexural strengthening of reinforced concrete beam using a natural fibre reinforced polymer laminate: an experimental and numerical study

External strengthening of reinforced concrete beam with opening by bamboo fiber reinforced composites

RILEM TC 247-DTA round robin test: sulfate resistance, alkali-silica reaction and freeze–thaw resistance of alkali-activated concretes

Experimental and theoretical study of GFRP hoops and spirals in hybrid fiber reinforced concrete short columns

Effect of bio-stabilizers on capillary absorption and water vapour transfer into raw earth

Effect of fibre type and content on performance of bio-based concrete containing heat-treated apricot shell

Understanding the carbonation of concrete with supplementary cementitious materials: a critical review by RILEM TC 281-CCC

Lightweight FRC infill wall: in-plane and out-of-plane loading tests

A non destructive testing method for masonry by using UPV and cross validation procedure

Effect of early age drying shrinkage on the seismic response of RC structures

Methodology to evaluate variations in concrete color caused by white cement substitutions and forming materials

Identification of the viscoelastic properties of an asphalt mixture using a scanning laser Doppler vibrometer

For authors

Explore

Volume 53, issue 6, December 2020

Authors

Authors (first, second and last of 6)

Authors

Authors (first, second and last of 4)

Authors

Authors

Authors (first, second and last of 6)

Authors

Authors (first, second and last of 4)

Authors (first, second and last of 6)

Authors

Authors (first, second and last of 5)

Authors (first, second and last of 15)

Authors

Authors (first, second and last of 6)

Authors (first, second and last of 6)

Authors (first, second and last of 27)

Authors (first, second and last of 4)

Authors (first, second and last of 5)

Authors (first, second and last of 14)

Authors

Authors (first, second and last of 6)

For authors

Explore