1. Recommendation of RILEM TC 178-TMC: Testing and modelling chloride penetration in concrete*

   • Prepared by Ø. Vennesland, M. A. Climent, C. Andrade RILEM Technical Committee 178-TMC (Carmen Andrade)**

   Rilem Technical Committee 06 December 2012 Pages: 337 - 344

   

2. Effective joining method for pseudo-ductile permanent formwork

   • Qingxu Jin
   • Christopher K. Y. Leung
   • Changli Yu

   Original Article 11 July 2012 Pages: 345 - 360

   

3. Microstructural changes in alkali activated fly ash/slag geopolymers with sulfate exposure

   • Idawati Ismail
   • Susan A. Bernal
   • Jannie S. J. van Deventer

   Original Article 11 July 2012 Pages: 361 - 373

   

4. Resistance to acid and sulfate solutions of microwave-assisted high calcium fly ash geopolymer

   • Prinya Chindaprasirt
   • Ubolluk Rattanasak
   • Sompop Taebuanhuad

   Original Article 11 July 2012 Pages: 375 - 381

   

5. Three-dimensional finite element analysis of reinforced concrete structural elements regarded as elastoplastic multiphase media

   • Marcelo P. Figueiredo
   • Samir Maghous
   • Américo Campos Filho

   Original Article 31 July 2012 Pages: 383 - 404

   

6. Rheology, fiber dispersion, and robust properties of Engineered Cementitious Composites

   • Mo Li
   • Victor C. Li

   Original Article 25 July 2012 Pages: 405 - 420

   

7. Fracture characterisation of green-glued polyurethane adhesive bonds in Mode I

   • Magdalena Sterley
   • Erik Serrano
   • Bertil Enquist

   Original Article 27 July 2012 Pages: 421 - 434

   

8. Structural behavior of alkali activated fly ash concrete. Part 1: mixture design, material properties and sample fabrication

   • Joseph Robert Yost
   • Aleksandra Radlińska
   • Michael Salera

   Original Article 09 August 2012 Pages: 435 - 447

   

9. Structural behavior of alkali activated fly ash concrete. Part 2: structural testing and experimental findings

   • Joseph Robert Yost
   • Aleksandra Radlińska
   • Nicholas J. Martignetti

   Original Article 30 November 2012 Pages: 449 - 462

   

10. Compaction-interaction packing model: regarding the effect of fillers in concrete mixture design

    • S. A. A. M. Fennis
    • J. C. Walraven
    • J. A. den Uijl

    Original Article 27 July 2012 Pages: 463 - 478

    

11. Erratum to: Compaction-interaction packing model: regarding the effect of fillers in concrete mixture design

    • S. A. A. M. Fennis
    • J. C. Walraven
    • J. A. den Uijl

    Erratum 25 January 2013 Pages: 479 - 479

12. Recommendations for the repair, the lining or the strengthening of concrete slabs or pavements with bonded cement-based material overlays

    • B. Bissonnette
    • L. Courard
    • A. Vaysburd

    Original Article 23 August 2012 Pages: 481 - 494

    

13. Erratum to: Recommendations for the repair, the lining or the strengthening of concrete slabs or pavements with bonded cement-based material overlays

    • B. Bissonnette
    • L. Courard
    • A. Vaysburd

    Erratum 22 November 2012 Pages: 495 - 495

14. Assessment of alkali–silica reaction damage through quantification of concrete nonlinearity

    • Krzysztof J. Leśnicki
    • Jin-Yeon Kim
    • Laurence J. Jacobs

    Original Article 04 December 2012 Pages: 497 - 509

    

15. Erratum to: Assessment of alkali–silica reaction damage through quantification of concrete nonlinearity

    • Krzysztof J. Leśnicki
    • Jin-Yeon Kim
    • Laurence J. Jacobs

    Erratum 22 January 2013 Pages: 511 - 511

16. Discussion of the paper titled “Design of clay/cement mixtures for extruded building products by Khelifi et al.”

    • Adnan Çolak
    • Turgay Coşgun

    Commentary To 08 January 2013 Pages: 513 - 515