1. Recommendation of RILEM TC 232-TDT: test methods and design of textile reinforced concrete

   • RILEM Technical Committee 232-TDT (Wolfgang Brameshuber)

   RILEM Technical Committee Open access 04 May 2016 Pages: 4923 - 4927

   

2. An approach to couple aging to stiffness and permanent deformation modeling of asphalt mixtures

   • Lucas F. de A. L. Babadopulos
   • Jorge Luis S. Ferreira
   • Jorge B. Soares

   Original Article 27 February 2016 Pages: 4929 - 4945

   

3. Some physical, mechanical and anatomical characteristics of stemwood and branchwood of two hardwood species used for structural applications

   • Peter Kessels Dadzie
   • Martin Amoah
   • Frank Oheneba-Kwarteng

   Original Article 09 March 2016 Pages: 4947 - 4958

   

4. Structural effects of steel reinforcement corrosion on statically indeterminate reinforced concrete members

   • Ignasi Fernandez
   • Manuel F. Herrador
   • Jesús Miguel Bairán

   Original Article 29 February 2016 Pages: 4959 - 4973

   

5. A new laboratory methodology for optimization of mixture design of asphalt concrete containing reclaimed asphalt pavement material

   • Sara Bressi
   • A. G. Dumont
   • M. N. Partl

   Origial Article 01 March 2016 Pages: 4975 - 4990

   

6. Behaviour of clay bricks from small-scale production units after high temperature exposure

   • J. C. Bidoung
   • P. Pliya
   • T. Beda

   Original Article 08 March 2016 Pages: 4991 - 5006

   

7. Assessment of dynamic modulus prediction models in fatigue cracking estimation

   • Konstantina Georgouli
   • Christina Plati
   • Andreas Loizos

   Original Article 10 March 2016 Pages: 5007 - 5019

   

8. Element-based stiffness reduction coefficient of steel–concrete composite beams with interface slip

   • Huang Yuan
   • Yang Yang
   • Peng Bo

   Original Article 09 March 2016 Pages: 5021 - 5029

   

9. Effectiveness factors for bond strength in FRP shear-strengthened RC beams

   • Vincenzo Colotti

   Original Article 11 March 2016 Pages: 5031 - 5049

   

10. Evaluation of steel fiber distribution in cement-based mortars using active microwave thermography

    • Ali Foudazi
    • Iman Mehdipour
    • Kamal H. Khayat

    Original Article 10 March 2016 Pages: 5051 - 5065

    

11. Strengthening and rehabilitation of exterior RC beam–column joints using carbon-FRP jacketing

    • Ebrahim Zamani Beydokhti
    • Hashem Shariatmadar

    Original Article 16 March 2016 Pages: 5067 - 5083

    

12. Experimental investigation on the seismic behavior of a new-type composite interior wallboard

    • Shaochun Ma
    • Nan Jiang

    Original Article 06 April 2016 Pages: 5085 - 5095

    

13. Durability of stone-repair mortars used in historic buildings from Paris

    • P. López-Arce
    • M. Tagnit-Hammou
    • A. Kaci

    Original Article 12 March 2016 Pages: 5097 - 5115

    

14. Stability of steel–concrete composite beams with full openings in concrete flange

    • Yu-Hang Wang
    • Jian-Guo Nie
    • Hong-Song Hu

    Original Article 17 March 2016 Pages: 5117 - 5130

    

15. Possibilities of improving crushed sand performance in fresh concrete by washing: a case study

    • Rolands Cepuritis
    • Ernst Mørtsell

    Original Article 22 March 2016 Pages: 5131 - 5146

    

16. Influence of recycled carbon powder waste addition on the physical and mechanical properties of cement pastes

    • J. Norambuena-Contreras
    • C. Thomas
    • I. Lombillo

    Original Article 16 March 2016 Pages: 5147 - 5159

    

17. Effect of flexural impact on freeze–thaw and deicing salt resistance of steel fiber reinforced concrete

    • Wuman Zhang
    • Ning Zhang
    • Yao Zhou

    Original Article 16 March 2016 Pages: 5161 - 5168

    

18. Influence of steel–concrete interface defects induced by top-casting on development of chloride-induced corrosion in RC beams under sustained loading

    • Linwen Yu
    • Raoul François
    • Richard Gagné

    Original Article 16 March 2016 Pages: 5169 - 5181

    

19. Differential-scheme based micromechanical framework for saturated concrete repaired by the electrochemical deposition method

    • Qing Chen
    • Zhengwu Jiang
    • Yaqiong Wang

    Original Article 17 March 2016 Pages: 5183 - 5193

    

20. High temperature mechanical and material properties of burnt masonry bricks

    • Wasim Khaliq
    • Muhammad Farrukh Bashir

    Original Article 17 March 2016 Pages: 5195 - 5208

    

21. Application of the factor method to the prediction of the service life of external paint finishes on façades

    • Margarida Magos
    • Jorge de Brito
    • Ana Silva

    Original Article 22 March 2016 Pages: 5209 - 5225

    

22. Non-linear torsion behaviour of concrete filled steel tube columns

    • Yu-Hang Wang
    • Xu-Hong Zhou

    Original Article 18 March 2016 Pages: 5227 - 5241

    

23. Acoustic emission and microstructural changes in fly ash geopolymer concretes exposed to simulated fire

    • Gregor J. G. Gluth
    • William D. A. Rickard
    • Stephan Pirskawetz

    Original Article 21 March 2016 Pages: 5243 - 5254

    

24. Influence of mix parameters on pore properties and modulus of pervious concrete: an application of ultrasonic pulse velocity

    • Anush K. Chandrappa
    • Krishna Prapoorna Biligiri

    Original Article 23 March 2016 Pages: 5255 - 5271

    

25. Degradation of carbon fiber reinforced polymer from cathodic protection process on exposure to NaOH and simulated pore water solutions

    • Hongfang Sun
    • Shazim Ali Memon
    • Feng Xing

    Original Article 24 March 2016 Pages: 5273 - 5283

    

26. Experimental investigation on hysteretic behavior of thin-walled circular steel tubes under constant compression and biaxial bending

    • Jian Cai
    • Sheng He
    • Zhiliang Zuo

    Original Article 25 March 2016 Pages: 5285 - 5302

    

27. Bending crack behaviour of plain concrete beams externally reinforced with TRC

    • Svetlana Verbruggen
    • Tine Tysmans
    • Jan Wastiels

    Original Article 25 March 2016 Pages: 5303 - 5314

    

28. Durability and mechanical properties of C–S–H/nitrobenzoic acid composite systems

    • Rahil Khoshnazar
    • James J. Beaudoin
    • Rouhollah Alizadeh

    Original Article 29 March 2016 Pages: 5315 - 5325

    

29. Development and characterization of self-sensing CNF HPFRCC

    • Dylan K. Hardy
    • Matthew F. Fadden
    • Ahmed Khattab

    Original Article 30 April 2016 Pages: 5327 - 5342

    

30. Load carrying capacity of halved and tabled tenoned timber scarf joint

    • J. R. Aira
    • G. Íñiguez-González
    • F. Arriaga

    Original Article 26 March 2016 Pages: 5343 - 5355

    

31. Fire resistance design of un-protected FRP-strengthened RC beams

    • Wan-Yang Gao
    • Jian-Guo Dai
    • J. G. Teng

    Original Article 29 March 2016 Pages: 5357 - 5371