1. Computational results of a model for chloride ingress in concrete including convection, drying-wetting cycles and carbonation

   • S. J. H. Meijers
   • J. M. J. M. Bijen
   • A. L. A. Fraaij

   Scientific Reports Pages: 145 - 154

2. Durability modelling of glass fibre reinforcement in cementitious environment

   • J. Orlowsky
   • M. Raupach
   • J. Wastiels

   Scientific Reports Pages: 155 - 162

3. Effect of matrix modification on durability of glass fiber reinforced cement composites

   • A. Peled
   • J. Jones
   • S. P. Shah

   Scientific Reports Pages: 163 - 171

4. Strength of shear connection in composite bridges with precast decks using high performance concrete and shear-keys

   • D. L. Araújo
   • M. K. El Debs

   Scientific Reports Pages: 173 - 181

5. Flexural analysis and design of reinforced concrete beams with externally bonded FRP reinforcement

   • N. Pešić
   • K. Pilakoutas

   Scientific Reports Pages: 183 - 192

6. Tension-stiffening model for FRP-strenghened RC concrete two-way slabs

   • U. A. Ebead
   • H. Marzouk

   Scientific Reports Pages: 193 - 200

7. Correlation between the internal length, the fracture process zone and size effect in model materials

   • K. Haidar
   • G. Pijaudier-Cabot
   • A. Loukili

   Scientific Reports Pages: 201 - 210

8. Experimental and analytical assessment of the behavior of stainless steel reinforced concrete beams

   • M. Geromel
   • O. Mazzarella

   Scientific Reports Pages: 211 - 218

9. Finite-element modelling of concrete prisms reinforced with composites plates—Theory of cracking

   • S. Kesteloot
   • C. Djelal
   • I. Benslimane

   Scientific Reports Pages: 219 - 227

10. Low-volume wet-process sprayed concrete: pumping and spraying

    • S. A. Austin
    • C. I. Goodier
    • P. J. Robins

    Scientific Reports Pages: 229 - 237

11. Rheological test methods for the characterization of extrudable cement-based materials—A review

    • R. Alfani
    • G. L. Guerrini

    Scientific Reports Pages: 239 - 247

12. Failure mechanism of masonry prism loaded in axial compression: computational aspects

    • L. Berto
    • A. Saetta
    • R. Vitaliani

    Scientific Reports Pages: 249 - 256

13. Mechanical response of solid clay brickwork under eccentric loading. Part I: Unreinforced masonry

    • A. Brencich
    • L. Gambarotta

    Scientific Reports Pages: 257 - 266

14. Mechanical response of solid clay brickwork under eccentric loading. Part II: CFRP reinforced masonry

    • A. Brencich
    • L. Gambarotta

    Scientific Reports Pages: 267 - 273

15. Étude de poutres en bois lamellé-collé présentant des trous de réservation

    • Ph. Jodin

    Scientific Reports Pages: 275 - 282

16. MD.E.1: Determination of moisture distribution and level using radar in masonry built with regular units

    RILEM Technical Committees Pages: 283 - 288