1. Determination of the fatigue strength of materials under plane stress state conditions

   • G. S. Pisarenko
   • A. G. Trapezon

   Scientific and Technical Section Pages: 393 - 397

2. Equation of state for creep of strain-hardening materials

   • V. N. Kiselevskii
   • B. D. Kosov

   Scientific and Technical Section Pages: 398 - 407

3. Rapid determination of endurance limit

   • V. N. Fedyunin
   • N. G. Kolomiets

   Scientific and Technical Section Pages: 408 - 412

4. Accumulation of damage under low-cycle load

   • A. N. Romanov

   Scientific and Technical Section Pages: 413 - 419

5. The effect of low temperature on the cyclic creep and life of aluminum alloys in low cycle fatigue

   • V. A. Strizhalo
   • A. I. Zinchenko

   Scientific and Technical Section Pages: 420 - 424

6. Effect of cyclic loading on the mechanical characteristics of 16GNMA steel, allowing for temperature

   • V. N. Rudenko
   • A. S. Spivakov

   Scientific and Technical Section Pages: 425 - 429

7. The nature of the structural imperfections in the alternate extension and compression of molybdenum single crystals

   • V. T. Troshchenko
   • E. É. Zasimchuk
   • N. D. Bega

   Scientific and Technical Section Pages: 430 - 433

8. Dispersion hardening of niobium with zirconium nitride

   • O. I. Ban'kovskii
   • V. F. Moiseev
   • V. I. Trefilov

   Scientific and Technical Section Pages: 434 - 441

9. Temperature sensitivity of the yield strength of low-alloy molybdenum alloys

   • I. S. Malashenko
   • N. P. Vashchilo

   Scientific and Technical Section Pages: 442 - 445

10. Choice of a getter for the high-temperature mechanical testing of niobium and its alloys

    • L. Z. Polyak
    • A. D. Rann
    • A. E. Kissil'

    Scientific and Technical Section Pages: 446 - 448

11. Study of the mechanical properties of molybdenum alloyed with hafnium

    • S. A. Golovin
    • V. K. Kharchenko
    • Yu. P. Babkin

    Scientific and Technical Section Pages: 449 - 451

12. Assessment of various methods of extrapolating the long-term (creep) strength of refractory metals and alloys

    • I. S. Tsvilyuk

    Scientific and Technical Section Pages: 452 - 455

13. Example of the action of local loads on uniform and thick-walled bodies of revolution

    • S. D. Bobritskaya
    • A. L. Kvitka

    Scientific and Technical Section Pages: 456 - 458

14. Correlation of the strength and thermal conductivity of adhesive joints

    • V. M. Popov
    • M. A. Orlov
    • V. P. Belokurov

    Scientific and Technical Section Pages: 459 - 461

15. Micromechanism of the formation of strength and plastic properties of steel as a function of structure

    • L. V. Kuksa

    Scientific and Technical Section Pages: 462 - 464

16. Effects of fastening looseness on vibration damping in rod bundles

    • Ya. A. Bratus

    Scientific and Technical Section Pages: 465 - 468

17. Some special features of the mechanism responsible for softening of reinforced plastics during heating

    • É. A. Éskin
    • A. S. Petrov
    • Yu. M. Borisenko

    Scientific and Technical Section Pages: 469 - 472

18. Investigation into heating conditions of plates during thermomechanical bending

    • P. P. Voroshko
    • A. L. Kvitka
    • A. S. Tsybenko

    Scientific and Technical Section Pages: 473 - 477

19. Accuracy in determining the stress field at a crack tip by the linear fracture mechanics method

    • L. A. Kopel'man

    Scientific and Technical Section Pages: 478 - 483

20. Finding the fracture toughness characteristics of graphite materials in plane strain

    • E. V. Lomakin
    • A. I. Zobnin
    • A. V. Berezin

    Scientific and Technical Section Pages: 484 - 487

21. Effect of preliminary plastic strain on the modulus of elasticity of steel

    • A. A. Ostrovskii

    Scientific and Technical Section Pages: 488 - 490

22. Shape of surface crack as a function of various cyclic load parameters

    • V. I. Kuzginov
    • V. G. Kudryashov
    • P. G. Miklyaev

    Scientific and Technical Section Pages: 491 - 493

23. Effect of vacuum on various stages of fatigue at high and low strain amplitudes

    • A. I. Alekseev
    • N. M. Grinberg
    • I. M. Lyubarskii

    Scientific and Technical Section Pages: 494 - 498

24. On the hardness of carbon materials

    • Yu. S. Virgil'ev
    • R. N. Ivanova
    • V. G. Makarchenko

    Scientific and Technical Section Pages: 499 - 502

25. Plasticity of copper in relation to purity, temperature, and strain rate

    • V. A. Skudnov
    • T. P. Madyanova
    • L. D. Sokolov

    Production Section Pages: 503 - 507

26. A strain-gauge method of determining thermal expansion coefficients

    • N. G. Gurskii

    Production Section Pages: 508 - 510

27. Effect of several technological factors on cold resistance of steels 10G2FR and 09G2S

    • S. A. Zandberg
    • V. A. Kroshkin
    • Yu. I. Rubenchik

    Production Section Pages: 511 - 514

28. Resistance to fracture of welded joints of medium-alloy steels

    • I. G. Nekrasova
    • V. A. Vinokurov
    • V. E. Laz'ko

    Production Section Pages: 515 - 517

29. Finding the temperature of transition to the brittle state in torsion tests

    • V. N. Chechko
    • B. D. Semenov
    • E. A. Averchenkov

    Production Section Pages: 518 - 519

30. Structural changes in columbium alloy in creep tests in vacuo

    • S. V. Rybakov
    • V. F. Shatinskii
    • A. I. Eliseev

    Brief Communications Pages: 520 - 522

31. The modulus of normal elasticity of cementite

    • L. A. Glikman
    • A. M. Kartashov
    • A. F. Lobov

    Brief Communications Pages: 523 - 524