1. Dynamics of the process of impact testing in concentrated bending. Report 2. Three-point bending

   • A. Ya. Krasovskii
   • I. V. Orynyak
   • V. N. Krasiko

   Scientific-Technical Section Pages: 697 - 702

2. Physical-mechanical approaches to the analysis of macroscopic failure. Report 1. Fatigue failure

   • G. P. Karzov
   • B. Z. Margolin
   • V. A. Shvetsova

   Scientific-Technical Section Pages: 703 - 712

3. Determination of the weight functions and stress intensity factors in polynomial loading of the edges of a normal separation crack in planar and axisymmetric formulation

   • V. A. Vainshtok
   • P. Ya. Kravets

   Scientific-Technical Section Pages: 712 - 726

4. Static crack resistance of a high-strength cast Al−Cu−Si alloy

   • G. V. Klevtsov
   • A. G. Zhizherin
   • Zh. T. Bakirov

   Scientific-Technical Section Pages: 726 - 729

5. A comparative evaluation of the crack resistance of polymethyl methacrylate on compact and chevron specimens

   • S. I. Sopenko

   Scientific-Technical Section Pages: 730 - 735

6. Calculation of low-cycle fatigue under nonproportional loading conditions

   • A. G. Kazantsev

   Scientific-Technical Section Pages: 735 - 741

7. Elastic compression of porous metals

   • G. V. Stepanov
   • V. I. Zubov

   Scientific-Technical Section Pages: 742 - 747

8. Cyclic shape memory and the operating capacity of titanium nickelide

   • S. P. Belyaev
   • Yu. V. Voitenko
   • V. M. Kovalev

   Scientific-Technical Section Pages: 748 - 752

9. Stress relaxation at room temperature for sheet single-crystal molybdenum

   • P. V. Zubarev
   • I. A. Karetnikov
   • B. D. Semenov

   Scientific-Technical Section Pages: 753 - 756

10. Analytical description of time-dependent strain effects in complex loading

    • É. I. Blinov

    Scientific-Technical Section Pages: 756 - 762

11. Trajectory of an edge crack in bending of a rod

    • V. V. Grishaev
    • E. N. Vysotskii

    Scientific-Technical Section Pages: 763 - 769

12. Experimental basis of the calculated values of critical loads for reinforced cylindrical shells

    • O. M. Dubovik
    • I. D. Pavlenko

    Scientific-Technical Section Pages: 769 - 772

13. Reliability and limiting states of glass cells

    • Yu. I. Kozub

    Scientific-Technical Section Pages: 773 - 777

14. Stressed state of the threaded joint of a gas turbine rotor

    • F. Sh. Bedcher
    • V. Ya. Reznichenko
    • S. N. Eigenson

    Scientific-Technical Section Pages: 777 - 783

15. Thermoelastic equilibrium of multilayered composite shells

    • A. G. Bondar'
    • A. O. Rasskazov
    • A. G. Bondarskii

    Scientific-Technical Section Pages: 784 - 789

16. Calculation of the geometric characteristics of the cross sections of turbine blades with curved axis

    • L. D. Magomaev
    • N. A. Kovalenkov

    Scientific-Technical Section Pages: 790 - 798

17. Phenomenological model of microplastic deformation and amplitude dependence of internal friction

    • O. V. Abramov
    • V. A. Kuyumchyan

    Scientific-Technical Section Pages: 798 - 802

18. Stress-strain state of a longitudinal-bending converter under resonant oscillations

    • N. A. Shul'ga
    • S. I. Rudnitskii
    • I. A. Lastivka

    Scientific-Technical Section Pages: 803 - 807

19. Resonance vibrations of turbine rotors with an annular shroud. Report no. 1. Theoretical model

    • A. P. Zin'kovskii
    • I. N. Buslenko
    • V. V. Matveev

    Scientific-Technical Section Pages: 808 - 813

20. Nonsteady deformation of an infinite elastoplastic plate by an explosion in a liquid

    • A. Abdirashidov
    • A. B. Karshiev

    Scientific-Technical Section Pages: 814 - 818

21. Damping capacity of certain structural materials during longitudinaltorsional vibrations

    • A. P. Bovsunovskii

    Scientific-Technical Section Pages: 818 - 823

22. Finite-element approach to determining the natural frequencies and modes of vibration of prestressed bodies

    • I. E. Gordienko
    • S. P. Kovalev
    • V. M. Chushko

    Scientific-Technical Section Pages: 824 - 828