Acceleration of mechanical size reduction of chromium carbide powders and mixtures based on chromium carbide V. A. Maslyuk Theory, Production Technology, And Properties Of Powders And Fibers Pages: 1 - 6
Determination of the ultimate plastic capacity for powder materials based on the plastic flow model for porous solids. II. Influence of porosity and the stress-strain properties of the solid phase on the ultimate plastic capacity of a porous sintered material M. B. ShternV. D. Dudunov Theory And Technology Of The Process Of Article Forming Pages: 7 - 10
Stressed state and kinematics in the rolling of powder materials on a metal substrate V. F. PotapkinA. N. LevkinE. P. Gribkov Theory And Technology Of The Process Of Article Forming Pages: 11 - 17
Consolidation processes in the sintering of fine-grained iron-copper pseudo-alloys P. Ya. RadchenkoV. V. PanichkinaV. V. Skorokhod Theory And Technology Of Sintering, Heat, And Chemical Heat-Treatment Processes Pages: 18 - 23
Effect of compressive stresses on deformation and contact phenomena in pressed fibrous materials during sintering A. G. KostornovV. N. Kimenko Theory And Technology Of Sintering, Heat, And Chemical Heat-Treatment Processes Pages: 24 - 28
Internal stress formation in spark coatings and heat treatment effects S. M. Kirilenko Theory And Technology Of Sintering, Heat, And Chemical Heat-Treatment Processes Pages: 29 - 31
Behavior of multilayer steel-bronze composites on frictional loading O. A. KatrusA. K. RadchenkoI. A. Kossko Sintered Metals And Alloys Pages: 32 - 37
Effects of preparation technique for MK-5 material on frictional and wear response G. M. Derkacheva Sintered Metals And Alloys Pages: 38 - 40
Removal of harmful interstitial impurities from molybdenum and tungsten Yu. V. DzyadykevichP. M. Gorbatyuk Refractory And Ceramics Materials Pages: 41 - 47
Component interactions in {Y, Gd, Tm} - Mo - B ternary systems at 1270 K N. F. ChabanS. I. MikhalenkoYu. B. Kuz’ma Physicochemical And Structural Investigations Of Materials Pages: 48 - 54
Thermodynamic parameters of scandium-iridium compounds <ScIr3> and ScIr2 L. V. GoncharukV. R. SidorkoT. Ya. Velikanova Physicochemical And Structural Investigations Of Materials Pages: 55 - 58
Thermodynamic modeling of chemical reactions in the heating of stainless steel H18N15 with Cr2C3, MoS2, and carbon additions in a hydrogen atmosphere S. P. GordienkoS. G. Napara-Volgina Physicochemical And Structural Investigations Of Materials Pages: 59 - 62
Directionally solidified eutectic of the B4C - ZrB2 system A. V. KovalevE. M. DudnikI. S. Martsynyuk Physicochemical And Structural Investigations Of Materials Pages: 63 - 66
Effect of nickel additions on the oxidation kinetics of double titanium and chromium carbide powder G. N. Komratov Physicochemical And Structural Investigations Of Materials Pages: 67 - 72
Reaction of boron carbide powders with biochemical media N. G. KakazeiV. A. LavrenkoG. A. Shkurko Physicochemical And Structural Investigations Of Materials Pages: 73 - 77
Texture formation in the cold rolling of pseudo-alloys R. V. MinakovaA. P. PachekV. G. Zatovskii Physicochemical And Structural Investigations Of Materials Pages: 78 - 84
Structural aspects of strength and methods to increase the serviceability of carbide coatings A. V. Byakova Physicochemical And Structural Investigations Of Materials Pages: 85 - 91
Strain hardening of porous iron under uniaxial compression Yu. N. PodrezovL. G. ShtykaD. G. Verbylo Physicochemical And Structural Investigations Of Materials Pages: 92 - 96
Effect of structure on the fatigue strength of dispersion-hardened Ni - 20% Cr - Al2O3 condensed materials Yu. F. Lugovskoi Physicochemical And Structural Investigations Of Materials Pages: 97 - 104
Riction properties of composite materials of the system TiN - Ain. II. Effect of oxide films on friction and wear of a ceramic material — Steel system T. V. MosinaA. D. PanasyukA. I. Yuga Physicochemical And Structural Investigations Of Materials Pages: 105 - 108
Device for electric-pulse sintering of powders under pressure I. M. Mal’tsevV. A. Baranov The Powder-Metallurgy Industry, Economics, And Organization Of Production Pages: 109 - 112