1. Highly dispersed composite iron-zinc powders obtained by a thermochemical method from oxalates

   • N. F. Kushchevskaya
   • T. M. Shvets

   Theory, Production Technology, and Properties of Powders and Fibers Pages: 457 - 459

2. Production of metal powders by the rapid cooling of a melt

   • Yu. M. Litvinenko

   Theory, Production Technology, and Properties of Powders and Fibers Pages: 460 - 463

3. Mechanism of the fragmentation of drops of a melt by swirl atomizers

   • V. I. Bagryantsev

   Theory, Production Technology, and Properties of Powders and Fibers Pages: 464 - 466

4. Comparison of the power parameters in the hot-pressing of porous semifinished products with different schemes of deformation

   • G. A. Baglyuk

   Theory and Process Technology of Article Forming Pages: 467 - 470

5. Heat and mass transport between the powder layers in graded materials obtained by the SHS method

   • A. F. Belikova
   • V. D. Zozulya
   • N. V. Sachkova

   Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 471 - 475

6. Densification and structure formation in the sintering of composite materials based on the IV–V group transition metals 1. Sintering of TiN−Cr composite materials

   • F. F. Egorov
   • V. E. Matsera

   Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 476 - 482

7. Properties of plasma-sprayed coatings treated by laser radiation

   • A. A. Alfintseva
   • A. V. Paustovskii
   • A. P. Rachek

   Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 483 - 486

8. Sintering of iron—silicon—boron magnetically soft steels

   • S. N. Bobrova
   • A. P. Vakutin
   • A. A. Shatsov

   Sintered Metals and Alloys Pages: 487 - 494

9. Effect of the electrospark alloying regime on the durability of high-speed steel R6M5K5 cutters

   • M. S. Koval’chenko
   • A. V. Paustovskii
   • A. P. Tamarov

   Sintered Metals and Alloys Pages: 495 - 498

10. Formation of highly porous ceramic based on silicon nitride

    • L. A. Shipilova
    • V. Ya. Petrovskii
    • I. V. Danilenko

    Refractory and Ceramics Materials Pages: 499 - 503

11. Influence of additives of silicon carbide and titanium diboride on the compaction during sintering and electrical resistivity of ceramical materials based on Al₂O₃

    • A. I. Kondrashev

    Refractory and Ceramics Materials Pages: 504 - 506

12. Influence of addition of calcium hexaboride on the structure and properties of hot-pressed titanium boride ceramic

    • T. I. Serebryakova
    • L. F. Ochkas
    • V. M. Vereshchaka

    Refractory and Ceramics Materials Pages: 507 - 511

13. Contact interaction and the wetting of graphite and diamond by melts of the Cu−Sn−Ni−Ti system

    • I. A. Lavrinenko
    • V. A. Evdokimov
    • Yu. V. Naidich

    Physicochemical and Structural Investigations of Materials Pages: 512 - 516

14. A method of generating composition-oxygen pressure diagrams

    • M. A. Zinovik

    Physicochemical and Structural Investigations of Materials Pages: 517 - 520

15. Oxidation resistance of double titanium-chromium carbide powders

    • G. N. Komratov

    Physicochemical and Structural Investigations of Materials Pages: 521 - 525

16. Conductivity estimation for highly porous permeable cellular materials

    • Yu. N. Kryuchkov

    Physicochemical and Structural Investigations of Materials Pages: 526 - 528

17. Microplasticity behavior of porous nickel

    • Yu. N. Podrezov
    • L. G. Shtyka
    • D. G. Verbilo

    Physicochemical and Structural Investigations of Materials Pages: 529 - 534

18. Effect of the working medium and the particle size of the strengthening phase on tribological properties of a metal—Ceramic composite

    • A. I. Yuga
    • N. M. Koval’chuk
    • A. D. Kostenko

    Physicochemical and Structural Investigations of Materials Pages: 535 - 539

19. Mechanical, tribological, and corrosion properties of stainless steel of the austenitic class grade Kh23N18 with additions of chromium carbide

    • S. G. Napara-Volgina
    • L. N. Orlova
    • A. K. Skuratovskii

    Physicochemical and Structural Investigations of Materials Pages: 540 - 544

20. Structural transformations during preparation of fine forms of exfoliated graphite

    • Yu. I. Sementsov
    • M. L. Pyatkovskii
    • I. G. Chernysh

    Physicochemical and Structural Investigations of Materials Pages: 545 - 551

21. Structural characteristics of Ti₄Fe₂O _x and their connection with hydrogen absorption

    • V. D. Dobrovol’skii
    • S. N. Endrzheevskaya
    • T. I. Shaposhnikova

    Physicochemical and Structural Investigations of Materials Pages: 552 - 554

22. Development of a method of producing infiltrated low-porosity tubular powder products

    • Yu. G. Dorofeev
    • S. N. Sergeenko
    • V. A. Chervonyi

    The Powder Metallurgy Industry, Economics, and Organization of Production Pages: 555 - 557

23. Electrospark and laser alloying of medical instruments made of 40Kh13 steel

    • I. A. Podchernyaeva

    Exchange of Experience and Information Pages: 558 - 561

24. Formation of multicomponent coatings on the diamond surface and their interaction with the binder

    • A. P. Oganyan

    Exchange of Experience and Information Pages: 562 - 567

25. Distribution of yttrium and impurities in finely dispersed composite powders based on Si₃N₄

    • G. L. Smiishkalne
    • E. A. Palchevskis

    Exchange of Experience and Information Pages: 568 - 570