Highly dispersed composite iron-zinc powders obtained by a thermochemical method from oxalates N. F. KushchevskayaT. M. Shvets Theory, Production Technology, and Properties of Powders and Fibers Pages: 457 - 459
Production of metal powders by the rapid cooling of a melt Yu. M. Litvinenko Theory, Production Technology, and Properties of Powders and Fibers Pages: 460 - 463
Mechanism of the fragmentation of drops of a melt by swirl atomizers V. I. Bagryantsev Theory, Production Technology, and Properties of Powders and Fibers Pages: 464 - 466
Comparison of the power parameters in the hot-pressing of porous semifinished products with different schemes of deformation G. A. Baglyuk Theory and Process Technology of Article Forming Pages: 467 - 470
Heat and mass transport between the powder layers in graded materials obtained by the SHS method A. F. BelikovaV. D. ZozulyaN. V. Sachkova Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 471 - 475
Densification and structure formation in the sintering of composite materials based on the IV–V group transition metals 1. Sintering of TiN−Cr composite materials F. F. EgorovV. E. Matsera Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 476 - 482
Properties of plasma-sprayed coatings treated by laser radiation A. A. AlfintsevaA. V. PaustovskiiA. P. Rachek Theory and Technology of Sintering, Heat, and Chemical Heat-Treatment Processes Pages: 483 - 486
Sintering of iron—silicon—boron magnetically soft steels S. N. BobrovaA. P. VakutinA. A. Shatsov Sintered Metals and Alloys Pages: 487 - 494
Effect of the electrospark alloying regime on the durability of high-speed steel R6M5K5 cutters M. S. Koval’chenkoA. V. PaustovskiiA. P. Tamarov Sintered Metals and Alloys Pages: 495 - 498
Formation of highly porous ceramic based on silicon nitride L. A. ShipilovaV. Ya. PetrovskiiI. V. Danilenko Refractory and Ceramics Materials Pages: 499 - 503
Influence of additives of silicon carbide and titanium diboride on the compaction during sintering and electrical resistivity of ceramical materials based on Al2O3 A. I. Kondrashev Refractory and Ceramics Materials Pages: 504 - 506
Influence of addition of calcium hexaboride on the structure and properties of hot-pressed titanium boride ceramic T. I. SerebryakovaL. F. OchkasV. M. Vereshchaka Refractory and Ceramics Materials Pages: 507 - 511
Contact interaction and the wetting of graphite and diamond by melts of the Cu−Sn−Ni−Ti system I. A. LavrinenkoV. A. EvdokimovYu. V. Naidich Physicochemical and Structural Investigations of Materials Pages: 512 - 516
A method of generating composition-oxygen pressure diagrams M. A. Zinovik Physicochemical and Structural Investigations of Materials Pages: 517 - 520
Oxidation resistance of double titanium-chromium carbide powders G. N. Komratov Physicochemical and Structural Investigations of Materials Pages: 521 - 525
Conductivity estimation for highly porous permeable cellular materials Yu. N. Kryuchkov Physicochemical and Structural Investigations of Materials Pages: 526 - 528
Microplasticity behavior of porous nickel Yu. N. PodrezovL. G. ShtykaD. G. Verbilo Physicochemical and Structural Investigations of Materials Pages: 529 - 534
Effect of the working medium and the particle size of the strengthening phase on tribological properties of a metal—Ceramic composite A. I. YugaN. M. Koval’chukA. D. Kostenko Physicochemical and Structural Investigations of Materials Pages: 535 - 539
Mechanical, tribological, and corrosion properties of stainless steel of the austenitic class grade Kh23N18 with additions of chromium carbide S. G. Napara-VolginaL. N. OrlovaA. K. Skuratovskii Physicochemical and Structural Investigations of Materials Pages: 540 - 544
Structural transformations during preparation of fine forms of exfoliated graphite Yu. I. SementsovM. L. PyatkovskiiI. G. Chernysh Physicochemical and Structural Investigations of Materials Pages: 545 - 551
Structural characteristics of Ti4Fe2O x and their connection with hydrogen absorption V. D. Dobrovol’skiiS. N. EndrzheevskayaT. I. Shaposhnikova Physicochemical and Structural Investigations of Materials Pages: 552 - 554
Development of a method of producing infiltrated low-porosity tubular powder products Yu. G. DorofeevS. N. SergeenkoV. A. Chervonyi The Powder Metallurgy Industry, Economics, and Organization of Production Pages: 555 - 557
Electrospark and laser alloying of medical instruments made of 40Kh13 steel I. A. Podchernyaeva Exchange of Experience and Information Pages: 558 - 561
Formation of multicomponent coatings on the diamond surface and their interaction with the binder A. P. Oganyan Exchange of Experience and Information Pages: 562 - 567
Distribution of yttrium and impurities in finely dispersed composite powders based on Si3N4 G. L. SmiishkalneE. A. Palchevskis Exchange of Experience and Information Pages: 568 - 570