Mechanics of Composite Materials

Volume 54, issue 5, November 2018

13 articles in this issue

Optimized Comparative Analysis of an Active Twist for Helicopter Rotor Blades with C- and D-Spar Designs

Authors (first, second and last of 4)
- E. Barkanov
- A. Kovalov
- J. Riemenschneider
- Content type: OriginalPaper
- Published: 09 November 2018
- Pages: 553 - 566
Designing the Structure of a Pressure Vessel Wall Made of a Layered Composite Material with Nonproportional Changes in Stress Components

Authors
- S. B. Sapozhnikov
- M. Yu. Semashko
- Content type: OriginalPaper
- Published: 09 November 2018
- Pages: 567 - 576
Two-Level Computation of the Elastic Characteristics of Woven Composites

Authors
- G. I. Lvov
- O. A. Kostromitskaya
- Content type: OriginalPaper
- Published: 10 November 2018
- Pages: 577 - 590
Comparison of MSC.Software Failure Models MAT8A, MATD054, and MATD058 of Composite Materials

Authors
- V. S. Symonov
- J. Juračka
- F. Löffelmann
- Content type: OriginalPaper
- Published: 09 November 2018
- Pages: 591 - 604
Elasticity Theory Solution of the Problem on Bending of a Narrow Multilayer Cantilever with a Circular Axis by Loads at its End

Authors
- S. B. Koval’chuk
- A. V. Goryk
- Content type: OriginalPaper
- Published: 10 November 2018
- Pages: 605 - 620
Numerical Estimation of the Mechanical Properties of a Steel-Fiber-Reinforced Geopolymer Composite

Authors
- J. Sliseris
- Content type: OriginalPaper
- Published: 09 November 2018
- Pages: 621 - 634
Comparison of Natural Frequencies of Fluid-Conveying Functionally Graded Thin-Walled Pipes in Two Cases of Temperature Distributions

Authors
- J. H. Cao
- Yu. Sh. Liu
- Content type: OriginalPaper
- Published: 14 November 2018
- Pages: 635 - 646
Orientation of Anisotropic Carbon Particles in the Matrix of Reinforced Plastics by an AC Electric Field

Authors
- D. A. Bulgakov
- A. Ya. Gorenberg
- A. M. Kuperman
- Content type: OriginalPaper
- Published: 13 November 2018
- Pages: 647 - 654
Effect of Increased Temperatures on the Deformation and Strength Characteristics of a GFRP Based on a Fabric of Volumetric Weave

Authors
- D. S. Lobanov
- A. V. Babushkin
- A. Yu. Luzenin
- Content type: OriginalPaper
- Published: 09 November 2018
- Pages: 655 - 664
Effect of Nonisocyanate Polyurethane and Nanoclay on the Mechanical Properties of an Epoxy Resin

Authors
- A. Białkowsk
- M. Bakar
- M. Przybyłek
- Content type: OriginalPaper
- Published: 08 November 2018
- Pages: 665 - 674
Influence of Bulk Thickness, Curing Time, and Curing Unit Type on the Microhardness of Different-Viscosity Bulk-Fill Composites

Authors
- M. Saipullaev
- U. Erdemir
- E. Yildiz
- Content type: OriginalPaper
- Published: 08 November 2018
- Pages: 675 - 684
Investigation of Carbon Fiber- and Wollastonite-Filled Graphite/Asphalt/Cu Composite Materials Using the Gene Expression Programming

Authors (first, second and last of 5)
- J. Wu
- Z. C. Huang
- Q. Tan
- Content type: OriginalPaper
- Published: 08 November 2018
- Pages: 685 - 694
Correction to: Calculation of Bending of Steel-Fiber-Reinforced Concrete Members by a Nonlinear Deformation Model with the Use of Iteration Procedures

Authors
- E. K. Opbul
- D. A. Dmitriev
- A. A. Vedernikova
- Content type: Correction
- Published: 09 November 2018
- Pages: 695 - 695

Volume 54, issue 5, November 2018

Optimized Comparative Analysis of an Active Twist for Helicopter Rotor Blades with C- and D-Spar Designs

Designing the Structure of a Pressure Vessel Wall Made of a Layered Composite Material with Nonproportional Changes in Stress Components

Two-Level Computation of the Elastic Characteristics of Woven Composites

Comparison of MSC.Software Failure Models MAT8A, MATD054, and MATD058 of Composite Materials

Elasticity Theory Solution of the Problem on Bending of a Narrow Multilayer Cantilever with a Circular Axis by Loads at its End

Numerical Estimation of the Mechanical Properties of a Steel-Fiber-Reinforced Geopolymer Composite

Comparison of Natural Frequencies of Fluid-Conveying Functionally Graded Thin-Walled Pipes in Two Cases of Temperature Distributions

Orientation of Anisotropic Carbon Particles in the Matrix of Reinforced Plastics by an AC Electric Field

Effect of Increased Temperatures on the Deformation and Strength Characteristics of a GFRP Based on a Fabric of Volumetric Weave

Effect of Nonisocyanate Polyurethane and Nanoclay on the Mechanical Properties of an Epoxy Resin

Influence of Bulk Thickness, Curing Time, and Curing Unit Type on the Microhardness of Different-Viscosity Bulk-Fill Composites

Investigation of Carbon Fiber- and Wollastonite-Filled Graphite/Asphalt/Cu Composite Materials Using the Gene Expression Programming

Correction to: Calculation of Bending of Steel-Fiber-Reinforced Concrete Members by a Nonlinear Deformation Model with the Use of Iteration Procedures

For authors

Explore

Volume 54, issue 5, November 2018

Authors (first, second and last of 4)

Authors

Authors

Authors

Authors

Authors

Authors

Authors

Authors

Authors

Authors

Authors (first, second and last of 5)

Authors

For authors

Explore