1. Inkjet printing of functional oxide nanostructures from solution-based inks

   • Aleksander Matavž
   • Barbara Malič

   Invited Paper: Functional coatings, thin films and membranes (including deposition techniques) 05 June 2018 Pages: 1 - 21

   

2. Facile method for surface etching of silica aerogel monoliths

   • Ioannis Michalou(di)s
   • Mary K. Carroll
   • Ann M. Anderson

   Brief Communication: Nano- and macroporous materials (aerogels, xerogels, cryogels, etc.) 18 June 2018 Pages: 22 - 26

   

3. The key role of 3-glycidoxypropyltrimethoxysilane sol–gel precursor in the development of wearable sensors for health monitoring

   • Valentina Trovato
   • Claudio Colleoni
   • Maria Rosaria Plutino

   Review Paper: Sol-gel and hybrid materials with surface modification for applications 31 May 2018 Pages: 27 - 40

   

4. Synthesis of mixed metal oxide nanoparticles of SnO₂ with SrO via sol–gel technology: their structural, optical, and electrical properties

   • Vinita sharma
   • Ramesh Chandra Prajapati

   Original Paper: Characterization methods of sol-gel and hybrid materials 12 June 2018 Pages: 41 - 49

   

5. Thermal-induced durable superhydrophilicity of TiO₂ films with ultra-smooth surfaces

   • Yuanyang Li
   • Bibo Xia
   • Bo Jiang

   Original Paper: Functional coatings, thin films and membranes (including deposition techniques) 17 June 2018 Pages: 50 - 58

   

6. Influence of nickel incorporation on structural, optical and electrical characteristics of SILAR synthesized CuO thin films

   • Mahima Ranjan Das
   • Partha Mitra

   Original Paper: Functional coatings, thin films and membranes (including deposition techniques) 12 June 2018 Pages: 59 - 73

   

7. Influence of pH of solution on phase composition of samarium-strontium cobaltite powders synthesized by wet chemical technique

   • Alina Ponomareva
   • Valeri Babushok
   • Irina Kruchinina

   Original Paper: Fundamentals of sol-gel and hybrid materials processing 04 June 2018 Pages: 74 - 82

   

8. Thermal stability of Al-modified silica aerogels through epoxide-assisted sol–gel route followed by ambient pressure drying

   • Xuan Ling
   • Bo Li
   • Wei Chen

   Original Paper: Fundamentals of sol–gel and hybrid materials processing 04 June 2018 Pages: 83 - 94

   

9. Aerogel nonwoven as reinforcement and batting material for firefighter’s protective clothing: a comparative study

   • Abu Shaid
   • Lijing Wang
   • M. A. Rahman Bhuyian

   Original Paper: Industrial and technological applications of sol-gel and hybrid materials 02 June 2018 Pages: 95 - 104

   

10. Commercialization of sol–gel based transparent functional coatings

    • Songwei Lu
    • Jiping Shao
    • Irina G. Schwendeman

    Original Paper: Industrial and technological applications of sol–gel and hybrid materials 02 June 2018 Pages: 105 - 112

    

11. Surface properties of sol–gel-based fluorine-containing ceramic coatings

    • Mustafa Hulusi Uğur
    • Emrah Çakmakҫı
    • Nilhan Kayaman-Apohan

    Original Paper: Industrial and technological applications of sol–gel and hybrid materials 17 June 2018 Pages: 113 - 124

    

12. Optimization of process parameters and its effect on structure and morphology of CuO nanoparticle synthesized via the sol−gel technique

    • Hafsa Siddiqui
    • Mohammad Ramzan Parra
    • Fozia Z. Haque

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 04 May 2018 Pages: 125 - 135

    

13. Correction to: Optimization of process parameters and its effect on structure and morphology of CuO nanoparticle synthesized via the sol−gel technique

    • Hafsa Siddiqui
    • Mohammad Ramzan Parra
    • Fozia Z. Haque

    Correction 20 June 2018 Pages: 136 - 136

    

14. Synthesis, characterization, multifunctional electrochemical (OGR/ORR/SCs) and photodegradable activities of ZnWO₄ nanobricks

    • Saad M. Alshehri
    • Jahangeer Ahmed
    • Tokeer Ahmad

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 05 June 2018 Pages: 137 - 146

    

15. A cationic surfactant-induced selective etching strategy for the synthesis of organosilica hollow nanospheres

    • Yu Wang
    • Lianxi Chen
    • Pengpeng Wang

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 04 June 2018 Pages: 147 - 155

    

16. Effects of post cure treatment in the glass transformation range on the structure and fire behavior of in situ generated silica/epoxy hybrids

    • Aurelio Bifulco
    • Fabiana Tescione
    • Francesco Branda

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) Open access 18 June 2018 Pages: 156 - 169

    

17. Selective aerobic photocatalytic oxidation of benzyl alcohol over spherical structured WO₃/TiO₂ nanocomposite under visible light irradiation

    • Elham Safaei
    • Sajjad Mohebbi
    • Mehdi Irani

    Original Paper: Nano-structured materials (particles, fibers, colloids, composites, etc.) 17 June 2018 Pages: 170 - 182

    

18. Light-activated hybrid organic/inorganic antimicrobial coatings

    • Esin Akarsu
    • Ramazan Uslu

    Original Paper: Sol-gel and hybrid materials for biological and health (medical) applications 15 June 2018 Pages: 183 - 194

    

19. Freeze-drying assisted sol–gel-derived silica-based particles embedding iron: synthesis and characterization

    • L. B. Chiriac
    • M. Todea
    • S. Simon

    Original Paper: Sol–gel and hybrid materials for biological and health (medical) applications 04 June 2018 Pages: 195 - 203

    

20. Synthesis and characterization of tungstophosphoric acid-modified mesoporous sponge-like TUD-1 materials

    • Marina N. Gorsd
    • Alexis A. Sosa
    • Luis R. Pizzio

    Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 31 May 2018 Pages: 204 - 215

    

21. Sol gel synthesis of 3-n-propyl(4-aminomethyl)pyridinium silsesquioxane chloride and the enhanced electrocatalytic activity of LbL films

    • Ariane Caroline Ribicki
    • Bianca Gurski Chemin
    • Sérgio Toshio Fujiwara

    Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 11 June 2018 Pages: 216 - 229

    

22. Mesoporous Pt/TiO_2-xN_x nanoparticles with less than 10 nm and high specific surface area as visible light hydrogen evolution photocatalysts

    • Xin Han
    • Lin An
    • Hongzhi Wang

    Original Paper: Sol-gel and hybrid materials for catalytic, photoelectrochemical and sensor applications 06 June 2018 Pages: 230 - 239

    

23. Synthesis of LiNiPO₄ via citrate sol–gel route

    • Ying Tao
    • Danqing Yi
    • Baojun Zhu

    Original Paper: Sol-gel and hybrid materials for dielectric, electronic, magnetic and ferroelectric applications 30 May 2018 Pages: 240 - 244

    

24. A method to improve crystal quality of CZTSSe absorber layer

    • Dao Anh Tuan
    • Nguyen Huu Ke
    • Le Vu Tuan Hung

    Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 04 June 2018 Pages: 245 - 253

    

25. Optical properties and dynamic process in Cd_1−xMn_xSe quantum dots sensitized solar cells

    • Dang Huu Phuc
    • Ha Thanh Tung

    Original Paper: Sol-gel and hybrid materials for energy, environment and building applications 16 June 2018 Pages: 254 - 262