Online first articles
Articles not assigned to an issue 81 articles
-
-
In-situ study of the effect of grain boundary misorientation on plastic deformation of Inconel 718 at high temperature
Authors (first, second and last of 5)
- Jutian Chen
- Junxia Lu
- Ze Zhang
- Content type: Metals & corrosion
- Published: 24 April 2024
This is part of 1 collection: -
Designing an ultrahigh-strength and ductile Ni-based alloy with a partially recrystallized structure
Authors (first, second and last of 8)
- Xianghui Zheng
- Haoran Lu
- Chongxiang Huang
- Content type: Metals & corrosion
- Published: 23 April 2024
This is part of 1 collection: -
Preparation and properties of corrosion-resistant polysiloxane-based ceramic coatings
Authors (first, second and last of 9)
- Wenshuo Du
- Yue Ma
- Yuezhen Bin
- Content type: Ceramics
- Published: 23 April 2024
This is part of 1 collection: -
A comparative study on the impact of preparation technique on the minority carrier lifetime of Cu2O absorber
Authors (first, second and last of 10)
- Chithira Venugopalan Kartha
- Yi-Teng Huang
- Thomas Fix
- Content type: Ceramics
- Published: 23 April 2024
This is part of 1 collection: -
Asymmetric behavior of irreversible weak pinning at the soft/hard magnetically interface revealed by the open recoil loops
Authors (first, second and last of 9)
- Yuqing Li
- Xuerui Xu
- Ming Yue
- Content type: Functional Nanocomposite Materials
- Published: 22 April 2024
This is part of 1 collection: -
Synthesis and characterization of a Dion–Jacobson two-dimensional perovskite
Authors (first, second and last of 12)
- Khai Dinh Do
- Trang Thuy Nguyen
- Thuat Nguyen-Tran
- Content type: Computation & theory
- Published: 22 April 2024
This is part of 1 collection: -
Regulation of Zn on mechanical properties and sensitization behavior of 5083 alloy
Authors (first, second and last of 8)
- Zhaoxi Song
- Xiangjie Wang
- Jianzhong Cui
- Content type: Metals & corrosion
- Published: 22 April 2024
This is part of 1 collection: -
Optimization of the ETL titanium dioxide layer for inorganic perovskite solar cells
Authors (first, second and last of 11)
- Wojciech Bulowski
- Agata Szwanda
- Zbigniew Starowicz
- Content type: Energy materials
- Open Access
- Published: 22 April 2024
This is part of 1 collection: -
Synthesis of low-temperature irreversible thermochromic indicator based on functional polydiacetylene for food storage applications
Authors
- Sachin Goyal
- Deepika Sharma
- Kamlesh Kumar
- Content type: Polymers & biopolymers
- Published: 21 April 2024
This is part of 1 collection: -
Role of geometry and coherent twin boundaries in mechanical response of Cu〈110〉 nanopillars under tensile loading: insights from molecular dynamics simulations
Authors
- Reza Namakian
- Wen Jin Meng
- Dorel Moldovan
- Content type: Metals & corrosion
- Published: 21 April 2024
This is part of 1 collection: -
Investigation of hot deformation behavior of forged 42CrMoA steel by cellular automata method based on topological deformation technique
Authors (first, second and last of 5)
- Xingwang Duan
- Yingqing Chen
- Jiachen Liu
- Content type: Metals & corrosion
- Published: 21 April 2024
This is part of 1 collection: -
Enhancing microstructural, tribological and corrosion responses of Al–Zn–Mg–Cu alloy via nano-/micro-Al2O3 particulates
Authors (first, second and last of 5)
- Ashish Kumar
- Virendra Pratap Singh
- Deepak Kumar
- Content type: Composited & nanocomposites
- Published: 21 April 2024
This is part of 1 collection: -
Integrated approach to assessing strength in slag-based geopolymer mortars: experimental study and modeling with advanced techniques
Authors
- Serhat KILIÇARSLAN
- Åžinasi BINGOL
- Content type: Composites & nanocomposites
- Open Access
- Published: 21 April 2024
This is part of 1 collection: -
Bifunctional electrocatalyst for oxygen reduction/evolution reactions based on controlled morphology of nickel–cobalt nanoprickly particles composited by graphene and carbon nanotube
Authors
- Mostafa Torabi
- Boosayarat Tomapatanaget
- Reza Karimi Shervedani
- Content type: Chemical routes to materials
- Published: 20 April 2024
This is part of 1 collection: -
Interfacial characteristics and wear properties of laser fabricated Fe‒Al coatings on 6061 aluminum alloy
Authors (first, second and last of 6)
- Yiming Chi
- Dahu Qian
- Chuanzhong Chen
- Content type: Metals & corrosion
- Published: 20 April 2024
This is part of 1 collection: -
Effect of CH4 concentration on the early growth stage of patterned diamond using high seeding density and hot filament chemical vapor deposition
Authors (first, second and last of 8)
- Florence A. Nugera
- Dipa Devkota
- Mark W. Holtz
- Content type: Electronic materials
- Published: 18 April 2024
This is part of 1 collection: -
Cobalt-based metal–organic framework (Co-MOF) thin films with high capacitance for supercapacitor electrode
Authors (first, second and last of 4)
- A. A. Bhoite
- V. B. Hubale
- N. L. Tarwal
- Content type: Electronic materials
- Published: 17 April 2024
This is part of 1 collection: -
Low-temperature coating of Mn2O3–MoS2 micro-nano-heterostructure anode as an efficient catalyst for water splitting applications
Authors (first, second and last of 4)
- A. G. Abd-Elrahim
- Deepto Roy
- Doo-Man Chun
- Content type: Energy materials
- Published: 17 April 2024
This is part of 1 collection: -
Te–Au nanowires with multiple enzyme-like activities for glucose detection
Authors (first, second and last of 7)
- Rui Ma
- Yijie Wang
- Shuqing Sun
- Content type: Materials for life sciences
- Published: 17 April 2024
This is part of 1 collection: -
PVA/silica hybrid hydrogel with ultra-high strength and toughness
Authors (first, second and last of 7)
- Xiansheng Tan
- Caiying Liang
- Jianhua Rong
- Content type: Materials for life sciences
- Published: 16 April 2024
This is part of 1 collection: -
Semisolid tensile properties near solidus temperature of direct-chill-cast AA5182 alloy and its hot-tearing susceptibility
Authors (first, second and last of 5)
- Mohamed Qassem
- Daniel Larouche
- X.-Grant Chen
- Content type: Metals & corrosion
- Published: 16 April 2024
This is part of 1 collection: -
Alloying effects on the microstructure and properties of CoCrFeMnNiX0.1 high-entropy alloys via rolling and thermal treatment
Authors (first, second and last of 6)
- Lingling Tang
- Yang Zhou
- Nan Wang
- Content type: Metals & corrosion
- Published: 16 April 2024
This is part of 1 collection: -
Construction of dual-functional superhydrophobic/photothermal Ni3S2 coating for efficient anti-icing
Authors (first, second and last of 5)
- Xiaoli Yin
- Sirong Yu
- Wenxin Wang
- Content type: Energy materials
- Published: 16 April 2024
This is part of 1 collection: -
Tunable microwave absorption properties of Ni particles/carbon composites by calcination temperature
Authors (first, second and last of 8)
- Yupeng Wei
- Meng Zhang
- Rongzhen Xiao
- Content type: Electronic materials
- Published: 16 April 2024
This is part of 1 collection: -
Utilizing ion-etching strategy to construct ultra-lightweight CoNi alloy-modified electrospun carbon fiber composites for efficient electromagnetic wave absorption
Authors (first, second and last of 9)
- Yijing Zhang
- Jiawei Ding
- Fang He
- Content type: Composites & nanocomposites
- Published: 16 April 2024
This is part of 1 collection: -
Influence of citric acid and EFKA as dispersants on the properties of alumina monoliths produced by tert-butyl alcohol-based freeze-casting
Authors (first, second and last of 13)
- Giovana Magalhães dos Santos
- Anna Carolina Britto de Faria
- Alysson Martins Almeida Silva
- Content type: Ceramics
- Published: 16 April 2024
This is part of 1 collection: -
Two-step preparation of steel slag–lignin hybrid materials for effective removal of methylene blue
Authors
- Zhaohui Zhang
- Jiaxiang Liu
- Content type: Chemical routes to materials
- Published: 16 April 2024
This is part of 1 collection: -
Preparation of silicon quantum dot–protein complex and application in antibacterial, antibiofilm, and bacterial cell imaging
Authors (first, second and last of 7)
- Dan Zhao
- Yan Jiao
- Haiyan Zhao
- Content type: Materials for life sciences
- Published: 15 April 2024
This is part of 1 collection: -
Tensile properties and fracture behavior of Al–8Si alloy sheets with different Mg under natural aging
Authors (first, second and last of 4)
- Guangdong Wang
- Yiran Zhou
- Yue Tian
- Content type: Metals & corrosion
- Published: 15 April 2024
This is part of 1 collection: -
Surface-defect tailoring in SnO2 (CNT) nanomaterials via sol-gel routes and its influence on the cycling stability
Authors
- Reynald Ponte
- Erwan Rauwel
- Protima Rauwel
- Content type: Functional Nanocomposite Materials
- Published: 15 April 2024
This is part of 1 collection: -
Synergic effects of scanning pattern and heat treatment on the microstructure-hot tensile behavior relationships of powder bed fusion-laser beam manufactured Hastelloy X
Authors (first, second and last of 6)
- Jalal Kangazian
- Ahmad Kermanpur
- Fazlollah Sadeghi
- Content type: Metals & corrosion
- Published: 14 April 2024
This is part of 1 collection: -
Role of Cu microstructure during isothermal aging of Cu/Sn/Cu micro solder joints
Authors (first, second and last of 5)
- H. Wei
- Z. J. Zhang
- W. R. Liang
- Content type: Metals & corrosion
- Published: 13 April 2024
This is part of 1 collection: -
Analysis of GaN crystal growth mechanism in liquid-phase epitaxial Na-flux method
Authors (first, second and last of 7)
- Gemeng Huang
- Hangfei Hao
- Zhenrong Li
- Content type: Energy materials
- Published: 12 April 2024
This is part of 1 collection: -
Synergistic strengthening of Al matrix composites by in situ pyrolysis of C and precipitation of nanophases
Authors (first, second and last of 7)
- Junguo Li
- Xuebin Yang
- Yi Sun
- Content type: Composites & nanocomposites
- Published: 12 April 2024
This is part of 1 collection: -
Correlation of magnetocaloric effect and critical behaviour in Ce3+-doped zinc–cobalt ferrite nanoparticles
Authors
- Sibasish Mandal
- Samrat Mukherjee
- Content type: Energy materials
- Published: 11 April 2024
This is part of 1 collection: -
Twin variant selection criteria in magnesium alloy: a review
Authors
- Zhe Liu
- Renlong Xin
- Xiaoxu Huang
- Content type: Lightweight Materials
- Published: 11 April 2024
This is part of 2 collections: -
Evolution of microstructure and properties in reactive air brazing of 3YSZ ceramic and aluminized Crofer22h stainless steel using Pd-modified Ag–CuO filler
Authors (first, second and last of 7)
- Wen Long Zhou
- Sheng Peng Hu
- Dai Jun Hu
- Content type: Metals & corrosion
- Published: 10 April 2024
This is part of 1 collection: -
Vacuum sealing-assisted processing of titanium–zirconium alloys: synthesis, microstructure, hardness, friction, wear, and corrosion studies for biomedical application
Authors (first, second and last of 4)
- Rupesh Kumar
- Aditya Sharma
- R. K. Gautam
- Content type: Metals & corrosion
- Published: 10 April 2024
This is part of 1 collection: -
Potential of bacterial cellulose for sustainable fashion and textile applications: A review
Authors (first, second and last of 4)
- Rajkishore Nayak
- Donna Cleveland
- Frances Joseph
- Content type: Review
- Open Access
- Published: 10 April 2024
This is part of 1 collection: -
Multi-stage stabilization and high-strength nano-porous Si@C for simple fabrication of lithium-ion batteries
Authors (first, second and last of 5)
- Xue Li
- Chenxi Liu
- Liming Wang
- Content type: Energy materials
- Published: 09 April 2024
This is part of 1 collection: -
Highly insulating polymeric aerogels derived from hollow material-filled gel emulsion
Authors (first, second and last of 6)
- Jianfei Liu
- Xiaolong An
- Kaiqiang Liu
- Content type: Composites & nanocomposites
- Published: 09 April 2024
This is part of 1 collection: -
Influence of TiO2 coverage on activity and stability of Pd-TiO2/MWCNT-supported catalysts used in direct formic acid fuel cells
Authors (first, second and last of 8)
- A. Malolepszy
- M. Mazurkiewicz-Pawlicka
- Yuan Chih Chang
- Content type: Energy materials
- Open Access
- Published: 09 April 2024
This is part of 1 collection: -
An out-of-oven curing technique for epoxy resin via magnetic particle-induced in situ heating
Authors (first, second and last of 7)
- Yichao Li
- Ao Sun
- Zhaojun Xi
- Content type: Composites & nanocomposites
- Published: 08 April 2024
This is part of 1 collection: -
Unveiling the microstructure evolution and mechanical properties in a gas tungsten arc-welded Fe–Mn–Si–Cr–Ni shape memory alloy
Authors (first, second and last of 10)
- J. G. Lopes
- D. Martins
- J. P. Oliveira
- Content type: Metals & corrosion
- Open Access
- Published: 06 April 2024
This is part of 1 collection: -
Solvothermally synthesized bismuth telluride hexagonal platelets as an efficient anode material for lithium- and sodium-ion batteries
Authors (first, second and last of 9)
- Shaik M. Abzal
- Sai Lakshmi Janga
- Jatis Kumar Dash
- Content type: Energy materials
- Published: 04 April 2024
This is part of 1 collection: -
Application and progress of inorganic composites in haemostasis: a review
Authors (first, second and last of 11)
- Hanjie Shao
- Xiang Wu
- Jingyun Ma
- Content type: Review
- Published: 04 April 2024
This is part of 1 collection: -
Acoustic shock wave-induced reversible phase transition (rhombohedral to hexagonal) of bismuth telluride
Authors (first, second and last of 6)
- F. Irine Maria Bincy
- S. Oviya
- S. A. Martin Britto Dhas
- Content type: Metals & corrosion
- Published: 04 April 2024
This is part of 1 collection: -
Mechanical, tribological, corrosion and tribocorrosion properties of ZrNxOy coatings on Ti–45Nb alloys by multi-arc ion plating
Authors (first, second and last of 7)
- Bo Dang
- Kai Yang
- Pingze Zhang
- Content type: Metals & corrosion
- Published: 02 April 2024
This is part of 1 collection: -
The effect of laser shock peening on the rotating bending fatigue resistance of S51740 stainless steel
Authors (first, second and last of 9)
- Xiangyu Ding
- Junlong Zhang
- Cheng Wang
- Content type: Metals & corrosion
- Published: 02 April 2024
This is part of 1 collection:
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more