Online first articles
Articles not assigned to an issue 230 articles
-
-
Optimization of image acquisition by automated white-light interferometers during the inspection of object surfaces
Authors
- Björn Schwarze
- Stefan Edelkamp
- Content type: OriginalPaper
- Open Access
- Published: 17 April 2024
-
Self-supervised fusion of deep soft assignments for multi-view diagnosis of machine faults
Authors (first, second and last of 5)
- Chuan Li
- Yifan Wu
- Yun Bai
- Content type: OriginalPaper
- Published: 16 April 2024
-
Manufacturing process selection based on similarity search: incorporating non-shape information in shape descriptor comparison
Authors (first, second and last of 6)
- Zhichao Wang
- Xiaoliang Yan
- David Rosen
- Content type: OriginalPaper
- Published: 16 April 2024
-
Optimization of laser annealing parameters based on bayesian reinforcement learning
Authors (first, second and last of 5)
- Chung-Yuan Chang
- Yen-Wei Feng
- Albert Shihchun Lin
- Content type: OriginalPaper
- Open Access
- Published: 15 April 2024
-
Visual coating inspection framework via self-labeling and multi-stage deep learning strategies
Authors (first, second and last of 5)
- Changheon Han
- Jiho Lee
- Huitaek Yun
- Content type: OriginalPaper
- Open Access
- Published: 14 April 2024
-
Recent advances in human–robot interaction: robophobia or synergy
Authors (first, second and last of 5)
- Andrius Dzedzickis
- Gediminas Vaičiūnas
- Vytautas Bučinskas
- Content type: ReviewPaper
- Published: 09 April 2024
-
Automatic high-frequency induction brazing through an ensembled detection with heterogenous sensor measurements
Authors (first, second and last of 5)
- Joonhyeok Moon
- Min-Gwan Kim
- Ki-Yong Oh
- Content type: OriginalPaper
- Published: 04 April 2024
-
A review of external sensors for human detection in a human robot collaborative environment
Authors (first, second and last of 5)
- Zainab Saleem
- Fredrik Gustafsson
- Saif Huq
- Content type: ReviewPaper
- Open Access
- Published: 04 April 2024
-
Ontologies for prognostics and health management of production systems: overview and research challenges
Authors (first, second and last of 4)
- Chiara Franciosi
- Yasamin Eslami
- Alexandre Voisin
- Content type: ReviewPaper
- Published: 02 April 2024
-
Big GCVAE: decision-making with adaptive transformer model for failure root cause analysis in semiconductor industry
Authors (first, second and last of 6)
- Kenneth Ezukwoke
- Anis Hoayek
- Jérôme Adrian
- Content type: OriginalPaper
- Published: 02 April 2024
-
Input attribute optimization for thermal deformation of machine-tool spindles using artificial intelligence
Authors (first, second and last of 5)
- Swami Nath Maurya
- Win-Jet Luo
- Pei-Tang Wang
- Content type: OriginalPaper
- Published: 01 April 2024
-
Spatiotemporal analysis of powder bed fusion melt pool monitoring videos using deep learning
Authors
- Richard J. Williams
- Swee Leong Sing
- Content type: OriginalPaper
- Published: 01 April 2024
-
CowSSL: contrastive open-world semi-supervised learning for wafer bin map
Authors
- Insung Baek
- Sung Jin Hwang
- Seoung Bum Kim
- Content type: OriginalPaper
- Published: 29 March 2024
-
Multi-level joint distributed alignment-based domain adaptation for cross-scenario strip defect recognition
Authors (first, second and last of 6)
- Kun Liu
- Ying Yang
- Haiyong Chen
- Content type: OriginalPaper
- Published: 29 March 2024
-
Manifold learning-assisted uncertainty quantification of system parameters in the fiber metal laminates hot forming process
Authors (first, second and last of 4)
- Xin Wang
- Xinchao Jiang
- Guangyao Li
- Content type: OriginalPaper
- Published: 29 March 2024
-
Knowledge distillation-based information sharing for online process monitoring in decentralized manufacturing system
Authors
- Zhangyue Shi
- Yuxuan Li
- Chenang Liu
- Content type: OriginalPaper
- Published: 29 March 2024
-
Monocrystalline silicon crystal line detection based on the improved YoloX-tiny algorithm
Authors
- Yuting She
- Hongxin Li
- Content type: OriginalPaper
- Published: 29 March 2024
-
Machine learning-enabled real-time anomaly detection for electron beam powder bed fusion additive manufacturing
Authors (first, second and last of 6)
- Davide Cannizzaro
- Paolo Antonioni
- Santa Di Cataldo
- Content type: OriginalPaper
- Open Access
- Published: 28 March 2024
-
Engineering and evaluating an unsupervised predictive maintenance solution: a cold-forming press case-study
Authors (first, second and last of 5)
- Apostolos Giannoulidis
- Anastasios Gounaris
- Daniel Caljouw
- Content type: OriginalPaper
- Open Access
- Published: 28 March 2024
-
Online performance and proactive maintenance assessment of data driven prediction models
Authors
- Yingjun Shen
- Taohong Wang
- Zhe Song
- Content type: OriginalPaper
- Published: 28 March 2024
-
Traditional machine learning and deep learning for predicting melt-pool cross-sectional morphology of laser powder bed fusion additive manufacturing with thermographic monitoring
Authors (first, second and last of 4)
- Haijie Wang
- Bo Li
- Fuzhen Xuan
- Content type: OriginalPaper
- Published: 27 March 2024
-
In-process surface quality monitoring of the slender workpiece machining with digital twin approach
Authors
- Kaibo Lu
- Zhen Li
- Andrew Longstaff
- Content type: OriginalPaper
- Published: 25 March 2024
-
A novel curved surface profile monitoring approach based on geometrical-spatial joint feature
Authors (first, second and last of 5)
- Yiping Shao
- Jun Chen
- Shichang Du
- Content type: OriginalPaper
- Published: 25 March 2024
-
Development of a melt pool characteristics detection platform based on multi-information fusion of temperature fields and photodiode signals in plasma arc welding
Authors (first, second and last of 7)
- Zhuangzhuang Mao
- Wei Feng
- Zhanwei Liu
- Content type: OriginalPaper
- Published: 24 March 2024
-
AutoML-driven diagnostics of the feeder motor in fused filament fabrication machines from direct current signals
Authors
- Sean Rooney
- Emil Pitz
- Kishore Pochiraju
- Content type: OriginalPaper
- Open Access
- Published: 21 March 2024
-
Sheet resistance prediction of laser induced graphitic carbon with transformer encoder-enabled contrastive learning
Authors
- Yupeng Wei
- Gerd Grau
- Dazhong Wu
- Content type: OriginalPaper
- Published: 19 March 2024
-
A data driven sequential learning framework to accelerate and optimize multi-objective manufacturing decisions
Authors (first, second and last of 4)
- Hamed Khosravi
- Taofeeq Olajire
- Imtiaz Ahmed
- Content type: OriginalPaper
- Published: 18 March 2024
-
Multiple operational mode prediction at milling tool-tip based on transfer learning
Authors (first, second and last of 4)
- Kai Zhou
- Feng Feng
- Pingfa Feng
- Content type: OriginalPaper
- Published: 15 March 2024
-
Bayesian inference for multi-label classification for root cause analysis and probe card maintenance decision support and an empirical study
Authors
- Chen-Fu Chien
- Jia-Yu Peng
- Content type: OriginalPaper
- Published: 14 March 2024
-
Virtual metrology for chemical mechanical planarization of semiconductor wafers
Authors (first, second and last of 4)
- Balamurugan Deivendran
- Vishnu Swaroopji Masampally
- Venkataramana Runkana
- Content type: OriginalPaper
- Published: 13 March 2024
-
The multisensor information fusion-based deep learning model for equipment health monitor integrating subject matter expert knowledge
Authors
- Jr-Fong Dang
- Content type: OriginalPaper
- Published: 13 March 2024
-
A novel joint segmentation approach for wafer surface defect classification based on blended network structure
Authors (first, second and last of 4)
- Zhouzhouzhou Mei
- Yuening Luo
- Yining Chen
- Content type: OriginalPaper
- Published: 13 March 2024
-
Synthetic data generation using finite element method to pre-train an image segmentation model for defect detection using infrared thermography
Authors (first, second and last of 5)
- Kaushal Arun Pareek
- Daniel May
- Bernhard Wunderle
- Content type: OriginalPaper
- Open Access
- Published: 11 March 2024
-
BCTMSSF: a blockchain consensus-based traceability method for supply chain in smart factory
Authors (first, second and last of 5)
- Hang Zhao
- Kai Hu
- Libo Feng
- Content type: OriginalPaper
- Published: 10 March 2024
-
A predictive modelling strategy for warpage and shrinkage defects in plastic injection molding using fuzzy logic and pattern search optimization
Authors (first, second and last of 6)
- Steven O. Otieno
- Job M. Wambua
- Esther T. Akinlabi
- Content type: OriginalPaper
- Published: 09 March 2024
-
Smart process mapping of powder bed fusion additively manufactured metallic wicks using surrogate modeling
Authors (first, second and last of 6)
- Mohammad Borumand
- Saideep Nannapaneni
- Gisuk Hwang
- Content type: OriginalPaper
- Published: 06 March 2024
-
A kind of intelligent dynamic industrial event knowledge graph and its application in process stability evaluation
Authors (first, second and last of 5)
- Qingzong Li
- Pingyu Jiang
- Yuqian Yang
- Content type: OriginalPaper
- Published: 03 March 2024
-
Fidelity-adaptive evolutionary optimization algorithm for 2D irregular cutting and packing problem
Authors (first, second and last of 6)
- Yizhe Yang
- Bingshan Liu
- Gong Wang
- Content type: OriginalPaper
- Published: 02 March 2024
-
Relational network of innovation ecosystems generated by digital innovation hubs: a conceptual framework for the interaction processes of DIHs from the perspective of collaboration within and between their relationship levels
Authors (first, second and last of 4)
- Julio C. Serrano-Ruiz
- José Ferreira
- Ángel Ortiz
- Content type: ReviewPaper
- Open Access
- Published: 02 March 2024
-
Vision based process monitoring in wire arc additive manufacturing (WAAM)
Authors
- Jan Franke
- Florian Heinrich
- Raven T. Reisch
- Content type: OriginalPaper
- Open Access
- Published: 01 March 2024
-
Human–machine knowledge hybrid augmentation method for surface defect detection based few-data learning
Authors (first, second and last of 6)
- Yu Gong
- Xiaoqiao Wang
- Xi Zhang
- Content type: OriginalPaper
- Published: 01 March 2024
-
A novel approach to enhance defect detection in wire arc additive manufacturing parts using radiographic testing without surface milling
Authors (first, second and last of 8)
- Mahjoub El Mountassir
- Didier Flotte
- Sacha Bernet
- Content type: OriginalPaper
- Published: 01 March 2024
-
Collaborative optimization of manufacturing service allocation via multi-task transfer learning evolutionary approach
Authors (first, second and last of 4)
- Jiajun Zhou
- Liang Gao
- Xifan Yao
- Content type: OriginalPaper
- Published: 01 March 2024
-
Towards a knowledge graph framework for ad hoc analysis in manufacturing
Authors (first, second and last of 8)
- Bart Meyers
- Hans Vangheluwe
- Klaas Gadeyne
- Content type: OriginalPaper
- Open Access
- Published: 29 February 2024
This is part of 1 collection: -
Intrinsic and post-hoc XAI approaches for fingerprint identification and response prediction in smart manufacturing processes
Authors (first, second and last of 9)
- Abhilash Puthanveettil Madathil
- Xichun Luo
- Yi Qin
- Content type: OriginalPaper
- Open Access
- Published: 28 February 2024
This is part of 1 collection: -
Simulation-based metaheuristic optimization algorithm for material handling
Authors (first, second and last of 5)
- Carolina Saavedra Sueldo
- Ivo Perez Colo
- Gerardo G. Acosta
- Content type: OriginalPaper
- Published: 28 February 2024
-
A digital twin-assisted deep transfer learning method towards intelligent thermal error modeling of electric spindles
Authors (first, second and last of 8)
- Shuai Ma
- Jiewu Leng
- Xin Chen
- Content type: OriginalPaper
- Published: 26 February 2024
-
Technical language processing for Prognostics and Health Management: applying text similarity and topic modeling to maintenance work orders
Authors
- Sarvesh Sundaram
- Abe Zeid
- Content type: OriginalPaper
- Open Access
- Published: 24 February 2024
-
An embedded TensorFlow lite model for classification of chip images with respect to chip morphology depending on varying feed
Authors
- Yusuf Özçevik
- Fikret Sönmez
- Content type: OriginalPaper
- Open Access
- Published: 23 February 2024
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more