Volume 75, Issue 5

Search all European Journal of Wood and Wood Products articles

September 2017

19 articles in this issue

Quasi-brittle fracture and size effect of glued laminated timber beams
Lukas Blank
Gerhard Fink
Andrea Frangi
Original 17 February 2017 Pages: 667 - 681
Deflections in sawn timber beams with stochastic properties
Diego A. García
Marta B. Rosales
Original 14 November 2016 Pages: 683 - 699
Predicting the bending properties of air dried and modified Populus tremula L. wood using combined air-coupled ultrasound and electrical impedance spectroscopy
M. Tiitta
L. Tomppo
H. Heräjärvi
Original 08 December 2016 Pages: 701 - 709
Impact performance of two bamboo-based laminated composites
Huanrong Liu
Zehui Jiang
Xiubiao Zhang
Original 12 November 2016 Pages: 711 - 718
Mechanical behaviour of pre-stressed spruce timber–timber 2.5-mm-step grooved connections under shearing tests
Stéphane Girardon
Jean-François Bocquet
Original 26 November 2016 Pages: 719 - 727
Finite element simulations of the loading and deformation of plywood seat shells
Srečko Vratuša
Mirko Kariž
Manja Kitek Kuzman
Original 22 February 2017 Pages: 729 - 738
Light medium-density fibreboards (MDFs): does acetylation improve the physico-mechanical properties?
Carsten Mai
Martin Direske
Andreas Weber
Original 22 December 2016 Pages: 739 - 745
Effects of cutterhead diameter and log infeed position on size distribution of pulp chips produced by a chipper-canter
Svetka Kuljich
Roger E. Hernández
Carl Blais
Original 21 January 2017 Pages: 747 - 760
Hydrophobic recovery of atmospheric pressure plasma treated surfaces of Wood-Polymer Composites (WPC)
Benedikt Hünnekens
Andreas Krause
Wolfgang Viöl
Original 22 March 2017 Pages: 761 - 766
Bonding of densified beech wood using adhesives based on thermally modified soy proteins
Doroteja Vnučec
Jure Žigon
Andreja Goršek
Original 22 February 2017 Pages: 767 - 776
Effect of incising on the long-term biodeterioration resistance of alkaline copper quaternary (ACQ) treated wood
Sung-Jun Pang
Jung-Kwon Oh
Jun-Jae Lee
Original 28 January 2017 Pages: 777 - 783
Factors influencing the processing and technological properties of laminates based on phenolic resin impregnated papers
Marion Thébault
Andreas Kandelbauer
Herfried Lammer
Original 24 May 2017 Pages: 785 - 806
Characterization of Ficus sycomorus tannin using ATR-FT MIR, MALDI-TOF MS and ¹³C NMR methods
Noel Konai
Danwe Raidandi
Lucien Meva’a
Original 22 March 2017 Pages: 807 - 815
Enhanced fungal resistance of Scots pine (Pinus sylvestris L.) sapwood by treatment with methyltrimethoxysilane and benzalkoniumchloride
Ladislav Reinprecht
Vladimír Vacek
Tomáš Grznárik
Original 25 June 2016 Pages: 817 - 824
Visual and visuo-tactile preferences of Malagasy consumers for machined wood surfaces for furniture: acceptability thresholds for surface parameters
Miora Falimiarana Ramanakoto
Anjy Nandrianina Andrianantenaina
Florent Eyma
Original 12 September 2016 Pages: 825 - 837
Moisture adsorption isotherms of yew wood (Taxus baccata L.)
Antonios N. Papadopoulos
Brief Original 24 March 2017 Pages: 839 - 840
Influence of washing chemo-thermo-mechanical pulps (CTMP) on the emission of volatile organic acids of medium density fibreboards (MDF) prepared therefrom
E. Roffael
Brief Original 10 March 2017 Pages: 841 - 842
Effect of heat treatment duration on the thermal conductivity of spruce and poplar wood
Zoltán Pásztory
Norbert Horváth
Zoltán Börcsök
Brief Original 27 February 2017 Pages: 843 - 845
Anatomical and chemical properties of bamboo sheaths (Dendrocalamus brandisii) as potential raw materials for paper making
Hui Zhan
Jing-wei Zhao
Shu-guang Wang
Brief Original 10 February 2017 Pages: 847 - 851

Volume 75, Issue 5

Quasi-brittle fracture and size effect of glued laminated timber beams

Deflections in sawn timber beams with stochastic properties

Predicting the bending properties of air dried and modified Populus tremula L. wood using combined air-coupled ultrasound and electrical impedance spectroscopy

Impact performance of two bamboo-based laminated composites

Mechanical behaviour of pre-stressed spruce timber–timber 2.5-mm-step grooved connections under shearing tests

Finite element simulations of the loading and deformation of plywood seat shells

Light medium-density fibreboards (MDFs): does acetylation improve the physico-mechanical properties?

Effects of cutterhead diameter and log infeed position on size distribution of pulp chips produced by a chipper-canter

Hydrophobic recovery of atmospheric pressure plasma treated surfaces of Wood-Polymer Composites (WPC)

Bonding of densified beech wood using adhesives based on thermally modified soy proteins

Effect of incising on the long-term biodeterioration resistance of alkaline copper quaternary (ACQ) treated wood

Factors influencing the processing and technological properties of laminates based on phenolic resin impregnated papers

Characterization of Ficus sycomorus tannin using ATR-FT MIR, MALDI-TOF MS and ¹³C NMR methods

Enhanced fungal resistance of Scots pine (Pinus sylvestris L.) sapwood by treatment with methyltrimethoxysilane and benzalkoniumchloride

Visual and visuo-tactile preferences of Malagasy consumers for machined wood surfaces for furniture: acceptability thresholds for surface parameters

Moisture adsorption isotherms of yew wood (Taxus baccata L.)

Influence of washing chemo-thermo-mechanical pulps (CTMP) on the emission of volatile organic acids of medium density fibreboards (MDF) prepared therefrom

Effect of heat treatment duration on the thermal conductivity of spruce and poplar wood

Anatomical and chemical properties of bamboo sheaths (Dendrocalamus brandisii) as potential raw materials for paper making

Navigation