Volume 49, issue 9-10, January 2014

27 articles in this issue

Study of Leak-Tightness of Plane–Plane Sealing Joints with Ion-Plasma Coatings

Authors
- V. L. Papernyi
- V. K. Pogodin
- E. A. Perminova
- Content type: RESEARCH, DESIGN, CALCULATIONS, AND OPERATING EXPERIENCE
- Published: 22 January 2014
- Pages: 569 - 574
Hydrogen Generation by Solid Polymer Electrolysis with Anodic Depolarization

Authors (first, second and last of 4)
- V. I. Kostin
- S. A. Grigor’ev
- A. Kryuger
- Content type: OriginalPaper
- Published: 22 January 2014
- Pages: 575 - 578
Vortical Contact Stage for Heat- and Mass-Exchange Processes

Authors
- N. A. Voinov
- S. A. Lednik
- O. P. Zhukova
- Content type: OriginalPaper
- Published: 22 January 2014
- Pages: 579 - 583
Influence of Ultrasound and Heat Treatment on the Rheological Properties of Ust-Tegusskoe Oil

Authors (first, second and last of 4)
- M. S. Mullakaev
- D. F. Asylbaev
- G. I. Volkova
- Content type: OriginalPaper
- Published: 22 January 2014
- Pages: 584 - 587
Development of Energy-Conserving and Ecologically Safe Processes for Production of Construction Materials and Fuel Pellets

Authors (first, second and last of 4)
- V. I. Nazarov
- D. A. Makarenkov
- Ya. A. Trefilova
- Content type: OriginalPaper
- Published: 22 January 2014
- Pages: 588 - 593
Analysis of Failure of Gas Compressor Piston Rod

Authors
- A. V. Mitrofanov
- S. N. Baryshov
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 594 - 599
Failure Conditions of the Annular Gaskets of Flange Joints

Authors
- V. D. Prodan
- G. V. Bozhko
- P. N. Boiko
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 600 - 605
Enhancing Reliability and Life of Plastic Sliding Bearings and Mobile Seals

Authors
- V. M. Yanko
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 606 - 608
Refining the Theoretical Foundations for the use of the Mechanisms of Multistage Platforms

Authors
- I. B. Chelpanov
- A. V. Kochetkov
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 609 - 614
Electrochemical Method for Disinfection of Hot Water Supply Systems

Authors (first, second and last of 5)
- V. G. Sister
- A. N. Tsedilin
- E. G. Shul’ga
- Content type: INDUSTRIAL ECOLOGY
- Published: 25 January 2014
- Pages: 615 - 618
Feasibility of Hydrocyclones for Combined Cleaning of Circulation and Waste Water

Authors
- V. A. Dikov
- D. E. Sukhanov
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 619 - 623
Study of the Effect of Different Heat Treatment Regimes on Chromium-Nickel-Molybdenum Alloy KhN65MVU Intercrystalline Corrosion Resistance

Authors (first, second and last of 6)
- A. S. Zholud’
- A. S. Derbyshev
- V. N. Kazantsev
- Content type: MATERIALS SCIENCE AND CORROSION PROTECTION
- Published: 25 January 2014
- Pages: 624 - 628
Quantitative Evaluation of Steel 15Kh5M Structural Degradation in a Stressed State and with Thermal Exposure

Authors (first, second and last of 5)
- A. V. Butin
- O. V. Lyzhov
- I. V. Belova
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 629 - 634
Expanding the Cylindrical ends of Shaped Tubes

Authors
- S. V. Parshin
- Content type: Manufacturing Technology
- Published: 25 January 2014
- Pages: 635 - 638
Tool Materials for Chemical Machine Building

Authors
- B. Ya. Mokritskii
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 639 - 640
Influence of Process Production Parameters on Effectiveness of Pneumatic Classification

Authors
- V. A. Kirsanov
- M. V. Kirsanov
- Content type: Research, Design, Calculations, and Operating Experience
- Published: 25 January 2014
- Pages: 643 - 647
Operating Regimes of Production Equipment for Thermal Shaping of Polymer Articles

Authors
- B. V. Berdyshev
- A. A. Borisov
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 648 - 651
Formation of Nitrogen Oxides in Combustion Chambers

Authors (first, second and last of 4)
- A. V. Vetkin
- A. L. Suris
- Yu. D. Khanin
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 652 - 654
Efficiency of Electrostatic Cyclone Operation

Authors (first, second and last of 9)
- A. G. Titov
- Z. R. Gil’vanova
- S. A. Perfilov
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 655 - 659
Comparison of Calculated and Experimental Flow Data for a Membrane Reformer for Special-Purity Hydrogen Production from Natural Gas

Authors
- A. B. Vandyshev
- V. A. Kulikov
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 660 - 667
Critical State of a Thin-Walled Cylindrical Shell Containing an Interlayer Fabricated from a Material of Lesser Strength

Authors
- V. L. Dil’man
- T. V. Karpeta
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 668 - 674
Design of an Extrusion Die for Plastic Profiles

Authors
- K. G. Kovalenko
- V. I. Sivetskii
- A. L. Sokol’skii
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 675 - 678
Development of a Conceptual Model of a Piston Compressor for Automating the Information Support of Dynamic Equipment

Authors
- E. R. Moshev
- M. A. Romashkin
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 679 - 685
Study of Slaked Lime Production Waste as a Sorbent for Cleaning Industrial Enterprise Exhaust Gases

Authors
- A. M. Gonopol’skii
- O. E. Papovyan
- Content type: INDUSTRIAL ECOLOGY
- Published: 25 January 2014
- Pages: 686 - 689
Review of Oil-Bearing Effluent Cleaning Methods

Authors
- V. V. Burenin
- A. N. Sova
- A. N. Marinko
- Content type: OriginalPaper
- Published: 25 January 2014
- Pages: 690 - 695
Applicability of Methane Nanosensors for Assurance of Explosion and Fire Safety of Entities Used for Recovery, Transport, and Utilization of Natural Gas. Part 1*

Authors
- V. A. Buzanovskii
- Content type: SAFETY, DIAGNOSIS, AND REPAIR
- Published: 25 January 2014
- Pages: 696 - 700
Development of a Technology for the Fabrication of Articles Made of Complex-Modified Polytetrafluoroethylene for Dry Friction Assemblies

Authors
- E. N. Eremin
- D. A. Negrov
- Content type: MANUFACTURING TECHNOLOGY
- Published: 25 January 2014
- Pages: 701 - 704

Volume 49, issue 9-10, January 2014

Study of Leak-Tightness of Plane–Plane Sealing Joints with Ion-Plasma Coatings

Hydrogen Generation by Solid Polymer Electrolysis with Anodic Depolarization

Vortical Contact Stage for Heat- and Mass-Exchange Processes

Influence of Ultrasound and Heat Treatment on the Rheological Properties of Ust-Tegusskoe Oil

Development of Energy-Conserving and Ecologically Safe Processes for Production of Construction Materials and Fuel Pellets

Analysis of Failure of Gas Compressor Piston Rod

Failure Conditions of the Annular Gaskets of Flange Joints

Enhancing Reliability and Life of Plastic Sliding Bearings and Mobile Seals

Refining the Theoretical Foundations for the use of the Mechanisms of Multistage Platforms

Electrochemical Method for Disinfection of Hot Water Supply Systems

Feasibility of Hydrocyclones for Combined Cleaning of Circulation and Waste Water

Study of the Effect of Different Heat Treatment Regimes on Chromium-Nickel-Molybdenum Alloy KhN65MVU Intercrystalline Corrosion Resistance

Quantitative Evaluation of Steel 15Kh5M Structural Degradation in a Stressed State and with Thermal Exposure

Expanding the Cylindrical ends of Shaped Tubes

Tool Materials for Chemical Machine Building

Influence of Process Production Parameters on Effectiveness of Pneumatic Classification

Operating Regimes of Production Equipment for Thermal Shaping of Polymer Articles

Formation of Nitrogen Oxides in Combustion Chambers

Efficiency of Electrostatic Cyclone Operation

Comparison of Calculated and Experimental Flow Data for a Membrane Reformer for Special-Purity Hydrogen Production from Natural Gas

Critical State of a Thin-Walled Cylindrical Shell Containing an Interlayer Fabricated from a Material of Lesser Strength

Design of an Extrusion Die for Plastic Profiles

Development of a Conceptual Model of a Piston Compressor for Automating the Information Support of Dynamic Equipment

Study of Slaked Lime Production Waste as a Sorbent for Cleaning Industrial Enterprise Exhaust Gases

Review of Oil-Bearing Effluent Cleaning Methods

Applicability of Methane Nanosensors for Assurance of Explosion and Fire Safety of Entities Used for Recovery, Transport, and Utilization of Natural Gas. Part 1*

Development of a Technology for the Fabrication of Articles Made of Complex-Modified Polytetrafluoroethylene for Dry Friction Assemblies

For authors

Explore

Volume 49, issue 9-10, January 2014

Authors

Authors (first, second and last of 4)

Authors

Authors (first, second and last of 4)

Authors (first, second and last of 4)

Authors

Authors

Authors

Authors

Authors (first, second and last of 5)

Authors

Authors (first, second and last of 6)

Authors (first, second and last of 5)

Authors

Authors

Authors

Authors

Authors (first, second and last of 4)

Authors (first, second and last of 9)

Authors

Authors

Authors

Authors

Authors

Authors

Authors

Authors

For authors

Explore