1. Introduction of system for organization of zero-defect labor

   • P. I. Korotkov

   OriginalPaper Pages: 501 - 503

2. Report on operations at Vniipkneftekhim in fulfilling plans and socialist obligations

   • G. I. Cherednichenko

   OriginalPaper Pages: 504 - 508

3. Influence of initial carbon content of coked alumina — Molybdenum catalyst on rate of regeneration by a steam — Oxygen mixture

   • Ya. R. Katsobashvili
   • G. M. Belova

   OriginalPaper Pages: 509 - 513

4. Macrokinetics of catalytic cracking of kerosine — Gas oil cuts over zeolite-containing catalysts

   • S. R. Kuttykadamov
   • G. N. Chernyakova
   • K. K. Karataev

   OriginalPaper Pages: 514 - 516

5. Recovery of aromatic hydrocarbons from reformer products by extraction with sulfolane

   • A. Z. Bikkulov
   • R. Kh. Khazipov
   • N. L. Popov

   OriginalPaper Pages: 517 - 520

6. Composition of liquid products from plasmochemical pyrolysis of gas condensate

   • Yu. V. Valibekov
   • B. E. Gutman
   • G. A. Novikov

   OriginalPaper Pages: 521 - 524

7. New selective solvents for lube oil treating

   • V. V. Pol'shinskii
   • L. M. Kozlov

   OriginalPaper Pages: 525 - 528

8. Nitrogen compounds in certain crude oils of the Ukrainian SSR

   • G. V. Sevast'yanova
   • L. I. Gaeva
   • P. D. Romanko

   OriginalPaper Pages: 529 - 530

9. Improved technology for utilizing spent sulfuric acid in refineries

   • V. I. Antonishin

   OriginalPaper Pages: 531 - 535

10. Combination unit for oil and wax production at drogobych refinery

    • S. V. Makar'ev
    • V. A. Lezhnev
    • T. D. Yaroslavkina

    OriginalPaper Pages: 536 - 537

11. System for automatic control of pneumotransport conditions in catalytic cracking units

    • D. M. Soskind
    • M. P. Bezuglov
    • E. Ya. Barsukov

    OriginalPaper Pages: 538 - 541

12. Feasibility study for the production of narrow, closely fractionated lube oil cuts

    • A. K. Manovyan
    • B. A. Suchkov
    • I. V. Savitskaya

    OriginalPaper Pages: 542 - 546

13. Residence time of polydisperse solid particles in fluidized bed

    • A. N. Kuznetsov
    • V. A. Basov
    • A. E. Kheifets

    OriginalPaper Pages: 547 - 551

14. Influence of dissolved-oxygen concentration on thermal-oxidative stability of jet fuels

    • V. A. Astaf'ev
    • V. D. Borisov
    • A. A. Popov

    OriginalPaper Pages: 552 - 553

15. Preparation of lithium greases by the use of internal and external polarization

    • I. G. Fuks
    • M. B. Bakaleinikov
    • V. V. Perekrestova

    OriginalPaper Pages: 554 - 557

16. Antiwear effectiveness of amine salts of sulfo-acids in lubricating oils

    • V. M. Lebedenko
    • V. A. Trofimov
    • A. B. Vipper

    OriginalPaper Pages: 558 - 560

17. Protective properties and water-displacing capability of diesel fuels

    • Al. A. Gureev

    OriginalPaper Pages: 561 - 563

18. Results from the use of M-14VTs oil in locomotive diesels

    • I. S. Zelenetskaya
    • O. F. Chekhovskaya
    • E. E. Didyuk

    OriginalPaper Pages: 564 - 568

19. Influence of polymer concentration in mineral oil on mechanical breakdown of polymer

    • P. P. Zaskal'ko
    • E. V. Mel'nikova

    OriginalPaper Pages: 569 - 571

20. Laboratory unit for determination of dynamic capacity of zeolites

    • G. I. Fedorov
    • R. I. Izmailov
    • G. A. Ovchinnikov

    OriginalPaper Pages: 572 - 574

21. Chromatographic method of analysis and investigation of alkylphenols used in additive manufacture

    • A. R. Lipshtein
    • N. I. Lulova

    OriginalPaper Pages: 575 - 577

22. Book review

    • Yu. F. Deinega

    BookReview Pages: 578 - 579