1. Foreword “Best of Gears 2023”

   • Karsten Stahl

   Vorwort 14 September 2023 Pages: 777 - 777

2. Binder jetting in gears

   • Lukas Klee
   • Thomas Bergs
   • Jens Brimmers

   Originalarbeiten/Originals Open access 12 June 2023 Pages: 779 - 791

   

3. Investigating different nodular graphite irons for the application of gears—a step towards standardization by using reasonable quality criteria

   • Jochen Lohmiller
   • Florian Dobler
   • Markus Wöppermann

   Originalarbeiten/Originals 12 June 2023 Pages: 793 - 805

   

4. Parameter based definition of eccentric cycloid gearings

   • Stefan Landler
   • Maximilian Trübswetter
   • Karsten Stahl

   Originalarbeiten/Originals Open access 07 June 2023 Pages: 807 - 819

   

5. Simulation Study on the Tribological Characteristics in the Meshing Contact in the Context of the Load Carrying Capacity Calculation of Internal Gears with Unbalanced Sliding Conditions

   • Michael Geitner
   • Sebastian Preintner
   • Karsten Stahl

   Originalarbeiten/Originals Open access 14 June 2023 Pages: 821 - 832

   

6. Analytical method for calculating the nominal tooth root stress in worm gear shafts

   • Johannes Gründer
   • Alexander Monz

   Originalarbeiten/Originals Open access 21 June 2023 Pages: 833 - 844

   

7. Measuring instantaneous angular speed using a gear wheel as material measure to detect pitting damage during an endurance test

   • Yanik Koch
   • Julian Hirschmann
   • Eckhard Kirchner

   Originalarbeiten/Originals Open access 15 June 2023 Pages: 845 - 853

   

8. Advances in simulations of displacements and stresses in light-weight gears

   • B. Guilbert
   • D. Dureisseix
   • P. Velex

   Originalarbeiten/Originals 26 June 2023 Pages: 855 - 869

   

9. Einsatzverhalten und Verschleiß von PVD-beschichteten und fluid-frei geschmierten Zahnrädern

   • Sebastian Sklenak
   • Dieter Mevissen
   • Andreas Mehner

   Originalarbeiten/Originals Open access 17 July 2023 Pages: 871 - 880

   

10. Experimental verification of high-performance polymer gears in an electric vehicle powertrain

    • S. Reitschuster
    • T. Tobie
    • K. Stahl

    Originalarbeiten/Originals Open access 30 June 2023 Pages: 881 - 890

    

11. Analysis of the tip interference in low gear ratio internal spur gears with profile modification

    • José I. Pedrero
    • Miguel Pleguezuelos
    • Miryam B. Sánchez

    Originalarbeiten/Originals Open access 29 June 2023 Pages: 891 - 900

    

12. Meshing limit line of Niemann face wormgear drive

    • Jian Cui
    • Yaping Zhao
    • Gongfa Li

    Originalarbeiten/Originals 30 June 2023 Pages: 901 - 912

    

13. Acoustical behavior of periodic flank modifications under dynamic operating conditions

    • Sebastian Sepp
    • Alois Wenig
    • Karsten Stahl

    Originalarbeiten/Originals Open access 06 July 2023 Pages: 913 - 922

    

14. Transferability of the scuffing load capacity of gear oils determined on spur gears to hypoid gears

    • Alexander Drechsel
    • Josef Pellkofer
    • Karsten Stahl

    Originalarbeiten/Originals Open access 26 July 2023 Pages: 923 - 932

    

15. Exploration of trade-offs between NVH and efficiency in bevel gear design

    • Eugeniu Grabovic
    • Alessio Artoni
    • Enrico Ciulli

    Originalarbeiten/Originals Open access 07 August 2023 Pages: 933 - 947

    

16. Crossed helical gears—simulative studies and experimental results on non-involute geometries

    • Linda Becker
    • Peter Tenberge

    Originalarbeiten/Originals Open access 07 August 2023 Pages: 949 - 959

    

17. Calculation method for wear of steel-bronze rolling-sliding contacts relating to worm gears

    • Philipp E. Schnetzer
    • Josef Pellkofer
    • Karsten Stahl

    Originalarbeiten/Originals Open access 08 August 2023 Pages: 961 - 971

    

18. Comparing the contact characteristics of involute gear/eccentric cycloidal gear calculated by various loaded tooth contact analysis models

    • Ling-Chiao Chang
    • Jonas-Frederick Hochrein
    • Karsten Stahl

    Originalarbeiten/Originals 11 August 2023 Pages: 973 - 986

    

19. Applicability of classic analytical calculation approaches for the design of plastic gears

    • Markus Rothemund
    • Michael Otto
    • Karsten Stahl

    Originalarbeiten/Originals Open access 08 August 2023 Pages: 987 - 995

    

20. Gear skiving with minimum twist errors

    • Andreas Hilligardt
    • Volker Schulze

    Originalarbeiten/Originals Open access 26 July 2023 Pages: 997 - 1007

    

21. Cross-correlation analysis among tooth profile and helix deviations

    • Daisuke Yamazaki
    • Daisuke Iba
    • Ichiro Moriwaki

    Originalarbeiten/Originals 11 August 2023 Pages: 1009 - 1017

    

22. Investigation of sound and vibration behavior of cylindrical gears

    • A. Beinstingel
    • F. Haringer
    • S. Marburg

    Originalarbeiten/Originals Open access 31 July 2023 Pages: 1019 - 1027

    

23. On the reduction of windage power losses in gears by the modification of tooth geometry

    • M. Ruzek
    • R. Brun
    • P. Velex

    Originalarbeiten/Originals 22 August 2023 Pages: 1029 - 1036

    

24. Design and analysis of compound stepped planetary gear drives for better transmission performances

    • Shyi-Jeng Tsai
    • Qi-You Zhuang

    Originalarbeiten/Originals 23 August 2023 Pages: 1037 - 1056

    

25. Crack growth based tooth root life prediction model—an influence quantity analysis

    • Johannes Lövenich
    • Moritz Zalfen
    • Christian Brecher

    Originalarbeiten/Originals Open access 29 August 2023 Pages: 1057 - 1067

    

26. A concept for comparison of new and aged lubricants in transmissions of electric vehicles and a method of oil aging on a test rig

    • Timo König
    • Luca Cadau
    • Markus Kley

    Originalarbeiten/Originals Open access 31 August 2023 Pages: 1069 - 1080

    

27. Improvement of the transmission efficiency in electric vehicles by using double staggered helical gears with shortened teeth

    • Ignacio Gonzalez-Perez
    • Alfonso Fuentes-Aznar

    Originalarbeiten/Originals Open access 13 September 2023 Pages: 1081 - 1094

    

28. A non-restrictive approach of gear geometry calculation for plastic gears

    • Florian Eigner
    • Stephan Oberle
    • Maik Berger

    Originalarbeiten/Originals Open access 29 September 2023 Pages: 1095 - 1102

    

29. Influence of axis misalignments in stepped planetary gear stages on the excitation behavior—test rig development and simulative analysis

    • Christian Westphal
    • Jens Brimmers
    • Christian Brecher

    Originalarbeiten/Originals Open access 13 September 2023 Pages: 1103 - 1116

    

30. Transient thermal model of a planetary gear set based on a uniform temperature approach

    • Wassim Ramdane
    • Christophe Changenet
    • Pierre Casanova

    Originalarbeiten/Originals 04 September 2023 Pages: 1117 - 1127

    

31. Experimental investigation of moving contact pattern in helical planetary gearboxes

    • Marius Fürst
    • Sebastian Sepp
    • Karsten Stahl

    Originalarbeiten/Originals Open access 05 September 2023 Pages: 1129 - 1136

    

32. Testing and modelling of a 2.5 MW wind turbine gearbox: Influence of lubricant formulation

    • Carlos M. C. G. Fernandes
    • Rui Ferreira
    • Ricardo Bernardes

    Originalarbeiten/Originals Open access 10 October 2023 Pages: 1137 - 1149

    

33. Investigation of friction and scuffing during loss of lubrication on a high velocity twin-disc test rig

    • Ulrike Cihak-Bayr
    • Thomas Wopelka
    • Christoph Wintersteiger

    Originalarbeiten/Originals Open access 10 October 2023 Pages: 1151 - 1167

    

34. Review of different calculation approaches for the mean coefficient of friction in ISO 6336

    • Niklas Blech
    • Constantin Paschold
    • Karsten Stahl

    Originalarbeiten/Originals Open access 04 October 2023 Pages: 1169 - 1179

    

35. Latest advancements in the lubricant simulations of geared systems: a technology ready for industrial applications

    • Franco Concli
    • Marco N. Mastrone

    Übersichtsarbeiten/Review articles Open access 22 August 2023 Pages: 1181 - 1191

    

36. Erratum to: Transient thermal model of a planetary gear set based on a uniform temperature approach

    • Wassim Ramdane
    • Christophe Changenet
    • Pierre Casanova

    Erratum 12 October 2023 Pages: 1193 - 1193