Abstract
Purpose
Primary glenohumeral osteoarthritis is commonly associated with static posterior subluxation of the humeral head. Scapulae with static/dynamic posterior instability feature a superiorly and horizontally oriented acromion. We investigated whether the acromion acts as a restraint to posterior humeral translation.
Methods
Five three-dimensional (3D) printed scapula models were biomechanically tested. A statistical shape mean model (SSMM) of the normal scapula of 40 asymptomatic shoulders was fabricated. Next, a SSMM of scapular anatomy associated with posterior subluxation was generated using data of 20 scapulae (“B1”). This model was then used to generate three models of surgical correction: glenoid version, acromial orientation, and acromial and glenoid orientation. With the joint axially loaded (100N) and the humerus stabilized, an anterior translation force was applied to the scapula in 35°, 60° and 75° of glenohumeral flexion. Translation (mm) was measured.
Results
In the normal scapula, the humerus translates significantly less to contact with the acromion compared to all other configurations (p < .000 for all comparisons; i.e. 35°: “normal” 8,1 mm (± 0,0) versus “B1” 11,9 mm (± 0,0) versus “B1 Acromion Correction” 12,2 mm (± 0,2) versus “B1 Glenoid Correction” 13,3 mm (± 0,1)). Restoration of normal translation was only achieved with correction of glenoid and acromial anatomy (i.e. 75°: “normal” 11 mm (± 0,8) versus “B1 Acromion Correction” 17,5 mm (± 0,1) versus “B1 Glenoid Correction” 19,7 mm (± 1,3) versus “B1 Glenoid + Acromion Correction” 11,5 mm (± 1,1)).
Conclusions
Persistence or recurrence of static/dynamic posterior instability after correction of glenoid version alone may be related to incomplete restoration of the intrinsic stability that is conferred by a normal acromial anatomy.
Level of Evidence V
biomechanical study
Similar content being viewed by others
Background
The reasons for static posterior subluxation of the humeral head – defined as posterior glenoid wear with a glenohumeral subluxation index of > 55% as measured on CT scans [11] – associated with B and C type glenoids [18, 20] and eccentric osteoarthritis (OA) are not well understood. A multifactorial etiology is postulated [6, 15, 18, 20]. Osseous changes (glenoid version, anteriorly displaced glenoid vault, acromial morphology), soft tissue factors (rotator cuff muscle imbalance, anterior capsular stiffness) and combinations thereof are held responsible [5]. Currently, correction of static posterior subluxation is attempted by restoring normal glenoid version using scapular neck opening wedge osteotomies. However, this neither consistently corrects posterior subluxation nor does it prevent progression of OA[4, 16]. It is therefore urgent to identify a treatment concept with the potential to durably restore joint concentricity and to decelerate or arrest progressive eccentric OA.
In addition to typically increased glenoid retroversion, scapular anatomy of shoulders with posterior instability and type B glenoids is characterized by abnormal acromial anatomy: Meyer [14, 15] and Beeler [3] documented substantial and consistent differences between the acromion of normal shoulders and shoulders with static posterior subluxation, as well as between stable shoulders and shoulders with dynamic posterior instability. Analysis of posteriorly unstable and statically subluxated shoulders revealed them to be significantly different from normal shoulders in terms of glenoid version, glenoid inclination, posterolateral acromial shape, position and orientation of the acromion. The acromion in these pathologic shoulders was superiorly and more horizontally oriented [2, 14, 15], implying a reduced posterior "coverage" of the humerus. Rationally, reduced posterior coverage could potentially decrease resistance to translation in response to a posterior load on the humerus.
It was therefore the purpose of this study to experimentally test the plausibility of the concept that the acromion acts a restraint to posterior humeral translation and whether the efficacy of this restraint may differ in anatomical variants that typify static or dynamic posterior instability. To answer these questions, the following hypotheses were tested:
-
1.
Posterior acromial morphology significantly affects posterior humeral head translation
-
2.
Less posterior acromial coverage of the humeral head contributes more to the force–displacement behavior of the shoulder than glenoid retroversion
-
3.
Correction of glenoid retroversion alone does not restore normal force–displacement behavior of a typical, posteriorly unstable shoulder
-
4.
Correction of acromial and glenoid (version and inclination) orientation to normal restores force–displacement behavior
Methods
Approval for the study was obtained from the ethical committee responsible for our institution in Zurich (Basec No. KEK-ZH-Nr.2020–01558).
Study design
Bioinspired phantoms of both stable shoulder anatomies and those predisposed to instability were created from data of a previous study [3]. Here, a statistical shape mean model (SSMM) of a “normal” scapula was created by synthesizing CT data of 40 asymptomatic shoulders. These 40 patients (20 women, 20 men; age 45–65 years) had CT scans in the course of polytrauma treatment without affection of the upper extremities. CT scans with visible bony defects of the scapula/humerus, osteoarthritis, rotator cuff tears, glenoid dysplasia (Walch type C glenoid [19] and glenoid dysplasia according to Weishaupt [21]) and a history of any shoulder pathology in the past were excluded.
The SSMM was generated with a commercial software (Shapemeans, Allschwil, Switzerland) and the 3-D mean model was obtained. This mean model defined normal anatomy (Fig. 1).
The first two rows show anthropometric data (mean values and SD) for “normal” scapulae (= statistical shape mean model; from Beeler [3]) and “B1” scapulae (according to Walch [17]) with static posterior subluxation (from Beeler [3]). The last two rows show the data of the two printed and tested models. Note the differences in posterior height of acromion and posterior coverage (6 mm higher acromion – measured as the distance between the posterolateral acromial edge and a line through the center of the glenoid drawn perpendicular to the scapular plane; and 8° less coverage – measured as an angle between a line drawn parallel to the scapular plane and a line to the posterolateral acromial edge) between a “normal” scapula and a “B1” scapula
The same procedure was followed for 20 statically, posteriorly subluxated, pre-arthritic shoulders (classified as B1) [18]. Static posterior humeral head subluxation was defined as a glenohumeral subluxation index of > 55% as defined by Jacxsens et al. [11] on a CT scan taken with the patient supine at midglenoid level. However, the CT scans of these shoulders did not always image the entire scapula. The CT scans allowed to determine all key anatomical parameters (Fig. 1) but not to create an SSMM of the entire scapula. Therefore, the clinical example of a B1 shoulder with the best fit of all mean values of this group and a completely imaged scapula was selected to represent the statically, posteriorly subluxated shoulder (“model B1”) (Fig. 1).
Data for the “normal” composite model and the “typical B1 model were imported into the MIMICS software (Materialize, Leuven, Belgium) and semi-automatic 3D segmentation was performed (B.S.). The reconstructed scapula models were then imported into the planning software CASPA (Computer Assisted Surgery Planning Application Version 5.0, in-house development Balgrist CARD AG) and oriented in a standardized scapular plane defined by: the center of a best-fit circle of the inferior glenoid, the intersection of the scapular spine with the medial border and the inferior tip of the scapula. To prevent incorrect positioning of the printed models on the biomechanical apparatus, a box (165 × 50x30mm), aligned in the scapular plane, was designed around the virtual scapular blade (Fig. 2). Differences in glenoid version and inclination could thereby be reproduced with reference to the scapular or horizontal plane, respectively. The distance from the center of the glenoid to the box was standardized (105 mm). Before the bioinspired shoulder phantoms were 3D printed they were anatomically scaled to correspond to the size of the "normal" model. The glenoid surface characteristics of the "normal" SSMM was applied to all other models to eliminate glenoid surface properties as a confounding factor. Also, according to the SSMM of the normal scapula, a humeral head with a 44 mm diameter was used [3].
A box aligned in the scapular plane (165 × 50x30mm), was placed around the virtual scapular blade (with the planning software CASPA). Differences in glenoid version and inclination could thereby be reproduced with reference to the scapular or horizontal plane, respectively. This was done in order to prevent incorrect positioning when mounting the models on the biomechanical apparatus. The scapula was fixed in a vice at the box level, with the scapular plane (orange plane) oriented strictly vertically, the glenoid facing upward. This defined glenoid version. Glenoid inclination was incorporated into the printed models with respect to the horizontal plane according to the predetermined values for all models. The scapular models were fixed on a plate on top of a bearing plate which could be levered upward to exert a compression force of 100N. With the humerus fixed, the anteroposterior (AP) and superoinferior (SI) translatable plate with its fixed scapula was rotated to simulate different shoulder flexion angles (60°, 90°, 120°)
Thus, the following five physical models were printed using 3-D selective laser sintering (EOS Formiga P100, Munich, Germany; polyamide 12 powder with a layer thickness of 0.12 mm):
-
1.
a statistical shape mean model biomechanical phantom representing a normal scapula (“normal”: composite anatomy created by averaging)
-
2.
a best fit B1 scapula model biomechanical phantom representing static posterior subluxation (“B1”: typical scapula that best fit to anatomical parameters of the class). This base anatomy was modified to include:
-
a
“B1” after correction of glenoid version to “normal”
-
b
“B1” after correction of the acromial orientation to “normal”
-
c
“B1” after correction of acromial and glenoid (version and inclination) orientation to “normal”
-
a
Biomechanical Test – Setup
The biomechanical setup allowed positioning of the joint with six degrees of freedom, as previously described in earlier biomechanical studies on shoulder instability [10] (Fig. 2). Briefly, the scapular phantom was fixed in a vice, with the scapular plane oriented vertically. The scapula was mounted on top of a bearing plate which could be rotated to simulate different flexion angles. The humerus was fixed in a cylinder on an arc on top of the simulator in a neutral humeral rotation [17]. The arc was adjusted to a glenohumeral abduction of 45° (corresponding to the abduction angle during shoulder flexion [13]). Two linear motion slides enabled antero-posterior and inferior translation of the scapula. Superior translation was blocked to prevent the scapula from moving cranially at humero-acromial contact. To translate the scapula, the antero-posterior linear translator was connected to a uniaxial material testing machine (Z010 TH, ZwickRoell, Ulm, Germany) equipped with a 10 kN load cell. The position of the scapula simulated 35°, 60° and 75° glenohumeral flexion (corresponding to 60°, 90°, 120° shoulder flexion [13]). For better comprehensibility, the flexion angles in the manuscript are referred to as shoulder flexion angles (60, 90, 120°) instead of glenohumeral flexion angles (35, 60, 75°). Polyamide 12 powder, also known as nylon, was used for 3D printing of the scapulae. As the surface texture of nylon is somewhat rough a rubber balloon was firmly applied to the articulating surfaces (humeral head, glenoid, acromion) and prior to each measurement the rubber surfaces were lubricated with lubricating oil (MOTOREX, Supergliss K68) to reduce friction. A static compression force of 100N – applied through a lever arm system – centered the humeral head in the glenoid concavity [12]. The antero-posterior alignment was visually verified and the position recorded by the testing machine, ensuring reproducible starting positions between repetitions.
The scapulae were pulled anteriorly, corresponding to a posterior translation of the humeral head, at a rate of 1 mm/s. The endpoints of measurement were either an achieved contact force of 40N between the acromion and humerus or a posterior dislocation. Both, the 40N of contact force and the amount of posterior translation (until 40N or posterior dislocation were noted) were measured by the ZwickRoell testing machine and a force–displacement curve was produced. A registered contact force of 40N led to deformation of the acromion, while posterior dislocation was defined as a sudden drop in the registered force–displacement curve and was controlled visually. After each measurement, the starting point was automatically approached by the machine. Every model was tested 3 times in 60°, 90° and 120° of shoulder flexion. Therefore, there were 9 tests per model and 45 tests in total.
Biomechanical and statistical analysis
Force—displacement data were recorded with the TestXpert II software (ZwickRoell, Ulm, Germany), and further processed using Microsoft Excel (Professional Plus 2019, Microsoft Corporation, Washington, USA). Displacement (mm) was calculated from the starting point (decentralization) to the end point (acromion contact or dislocation) after loading.
Statistical Analysis was primarily performed in a descriptive fashion. Mean values, standard deviations (SD) and 95% confidence intervals were calculated for every three test runs per flexion angle per model. Furthermore, a one-way ANOVA was conducted to assess the effects of the model on posterior translation until acromion contact or dislocation, within each flexion angle. Post-hoc comparisons were performed for selected pairs, and the respective p-values were Bonferroni-corrected. The analysis was performed with SPSS (IBM Corp. Version 27). P-values < 0.05 were considered statistically significant.
Results
Simulated shoulder instability increased with increasing higher glenohumeral flexion angles, and was observed to depend on both glenoid and acromion anatomy (Table 1, Fig. 3 and 4). Results from the biomechanical testing on the anatomical phantoms are presented below according to the tested anatomical orientation of the glenohumeral joint.
Displacement until acromion contact at all tested flexion angles for normal and pathological scapulae. In 60° and 90° flexion, the normal and the “B1” model had acromion contact. However, the “B1” model showed significantly more translation until acromion contact occurred. In 120° flexion, the “B1” model showed significantly more posterior translation until acromion contact occurred and eventually dislocated while the “normal” model had acromion contact and remained stable. Values in mean, bars show SD
Displacement until acromion contact at all tested flexion angles for “B1” scapula and corrected versions of “B1” scapula. The "B1 Acromion Correction" showed less translation compared to the “B1 Glenoid Correction” model. However, in all tested flexion angles only the combined “B1 Acromion + Glenoid Correction” had comparable posterior translation to the “normal” shoulder model. Values in mean, bars show SD
60° shoulder flexion
In 60° shoulder flexion, all shoulders were stable with tests terminating after achieving 40N acromiohumeral contact force. The “B1” model showed 4 mm more posterior translation on average at acromion contact than the “normal” model (“normal” 8.1 mm (± 0.0) versus “B1” 11.9 mm (± 0.0)); (Fig. 3, Video 1 vs. Video 3). The "B1" (11.9 mm (± 0.0)), "B1 Glenoid Correction" (13,3 mm (± 0.1)) and the "B1 Acromion Correction" (12,2 mm (± 0.2)) models showed increased translation as well compared to the “B1 Acromion + Glenoid Correction” group (9.1 mm (± 0.2)) (p < 0.001 for all comparisons) (Table 1).
90° shoulder flexion
In 90° shoulder flexion, three of five models dislocated. Only the "normal" and "B1 Acromion + Glenoid Correction" did not dislocate (Video 2). Acromion contact was achieved in all models. The “B1” (Video 4), "B1 Glenoid Correction" as well as the “B1 Acromion Correction” model showed acromion contact significantly later than the other models (p < 0.001 for all comparisons; “normal” 9.9 mm (± 0.1) versus “B1 Glenoid Correction” 18.1 mm (± 0.2) versus “B1 Acromion Correction” 16.4 mm (± 0.5)). The “B1 Acromion Correction” model showed acromion contact after 16.4 mm (± 0,5) mm of posterior translation which is 1.7 mm and 1.9 mm less compared to the “B1” or “B1 Glenoid Correction” models (p < 0.05 for both comparisons), respectively. The "B1" model dislocated on average 6 mm earlier than the "B1 Acromion Correction" model (“B1” 22.3 mm (± 0.2) versus “B1 Acromion Correction” 28.4 mm (± 1.7)).
120° shoulder flexion
In 120° shoulder flexion all models dislocated. Only the "B1" model had no acromion contact and therefore dislocated significantly earlier compared to all other models (p < 0.05 for all comparisons; “normal” 25.2 mm (± 0.6) versus “B1” 22,3 mm (± 0.2) versus “B1 Acromion Correction” 26.5 mm (± 0.2) versus “ B1 Glenoid Correction” 26.6 mm (± 1.2)). The “B1 Acromion Correction” and the “B1 Glenoid Correction” model showed acromion contact significantly later than the other models (p < 0.000 for all comparisons; “normal” 11 mm (± 0.8) versus “B1 Acromion Correction” 17,5 mm (± 0.1) versus “B1 Glenoid Correction” 19.7 mm (± 1.3) versus “B1 Glenoid + Acromion Correction” 11.5 mm (± 1.1)).
In all situations tested, acromion correction alone resulted in a shorter translational distance to acromion contact compared to glenoid correction alone (Fig. 4). However, this difference was only significant in 90 and 120° of flexion (p < 0.05).
Discussion
The most important finding of our study is that posterior acromial morphology seems to significantly affect humeral translation in response to antero-posterior loading of the joint. Our biomechanical models represented only osseous structures and tested whether the acromion provides passive mechanical resistance to posterior translation, or even dislocation of the humerus. The most interesting finding was that in 60° of shoulder flexion, the humeral head had contact with the acromion in all models and this contact prevented posterior dislocation. If dislocation did not occur in the B1 scapula, identical antero-posterior loading was associated with substantially increased posterior translation compared to the normal scapula: this suggests that in everyday activities below the horizontal plane, the humeral head can translate about 4 mm more posteriorly on the glenoid once capsular laxity and muscle activity allows to do so. If anterior elevation is increased to 90°, posterior translation in the B1 with respect to the normal shoulder essentially doubles before posterior dislocation occurs. This corresponds to the clinical experience which – with positional posterior subluxation occurring between 90–110° [9] of flexion in combination with the presented data – would be compatible with a hypothesis that posterior soft tissue laxity develops secondarily, due to the decreased resistance to posterior translation. Correction of increased glenoid retroversion alone did neither reduce posterior translation to normal nor prevent posterior dislocation in this study. This may explain why posterior opening wedge osteotomies or posterior J-grafts fail to consistently and durably recenter the humeral head [7, 16].
Posterior acromial morphology appears to contribute more to the force–displacement behavior of the posteriorly unstable shoulder than increased glenoid retroversion. In all situations tested, acromion correction alone resulted in a shorter translational distance to acromion contact compared to glenoid version correction alone.
Correction of increased glenoid retroversion alone seems to neither significantly reduce posterior translation until acromion contact nor prevent posterior dislocation in a B1 scapula. The literature focuses on correction of glenoid version [7, 16] but does not consider glenoid inclination. Type B1 shoulders can, however, not only exhibit increased glenoid retroversion but also increased inferior tilt [3] (Fig. 1). Our "B1 Acromion + Glenoid Correction" model corrected both deformities, did thus not correspond to an isolated correction of glenoid version. With a more superior starting point of humeral-head-glenoid-contact, the humeral head is brought closer to the acromion leading to earlier contact with the acromion.
Correction of acromial morphology and glenoid orientation restores near normal force–displacement behavior in this experimental setup. There were no significant differences between the “normal” model and the “B1 Acromion + Glenoid Correction” model in all tested situations. These results are in favor of a comprehensive correction of extraarticular scapular deformities.
The etiology underlying dynamic and static posterior instability with eccentric OA of the shoulder has been debated and speculated upon for years [5]. Several studies have demonstrated that acromial anatomy typically differs substantially between patients with a healthy shoulder, shoulders with eccentric OA, or posterior instability [1, 2, 14, 15]. The acromion of the patient groups that present with posterior instability is characterized by a high and flat roof with less posterolateral coverage of the humeral head. This study tests the radiological observations of Meyer [14, 15]. and Beeler et al. [1,2,3] in a biomechanical setting and provides evidence that these observations are indeed consistent with increased posterior translation and posterior instability. The clinical relevance of this study is that it demonstrates that such characteristic anatomical features of the acromion can affect its efficacy as a restraint to posterior translation of the humerus during glenohumeral elevation. Our study results could explain the high failure rates of conventional operative treatment for posterior instability and incipient eccentric OA [4, 7, 16]. They would suggest combined (glenoid and acromion) osteotomies planned on quantitative 3-D analyses of individual B1 scapulae and planned restoration of the anatomy as near as possible to the normal shoulder [8].
Limitations
The main limitation of the present study is that the shoulder joint was reduced to a model of the osseous joint partners and superior translation was blocked, neglecting potentially relevant contributions of some passive (capsulo-ligamentous) and active (muscular) contributors to shoulder stability. This proof-of-concept study is, in this sense, only a crude representation of functional shoulder anatomy. The model would benefit from refinement in future studies that mimic soft tissue contributions to shoulder stability in patients.
The advent of image processing and 3D printing technology is opening up many opportunities in patient-specific applications in orthopedics such as for the creation of anatomic models for surgical planning and training, education, PSIs, and 3D-printed custom implants. However, 3D printed bioinspired phantoms have not yet been used to answer biomechanical questions. Anterior and posterior glenohumeral instability have been tested in numerous in vitro studies with their respective limitations. Nevertheless, we consider the study design used to be valid, as it allows testing of purely osseous factors. This would not have been possible in a cadaveric model.
Conclusions
A normal acromial anatomy might act as a restraint to posterior humeral head translation. Persistence or recurrence of static and/or dynamic posterior instability after correction of glenoid version alone may be related to incomplete restoration of the intrinsic stability that is conferred by a normal acromial anatomy.
Availability of data and materials
The datasets used and analysed during the current study are available from the corresponding author on reasonable request.
Change history
26 December 2023
A Correction to this paper has been published: https://doi.org/10.1186/s40634-023-00711-y
References
Beeler S, Hasler A, Getzmann J, Weigelt L, Meyer DC, Gerber C (2018) Acromial roof in patients with concentric osteoarthritis and massive rotator cuff tears: multiplanar analysis of 115 computed tomography scans. J Shoulder Elbow Surg 27:1866–1876
Beeler S, Hasler A, Götschi T, Meyer DC, Gerber C (2018) Different acromial roof morphology in concentric and eccentric osteoarthritis of the shoulder: a multiplane reconstruction analysis of 105 shoulder computed tomography scans. J Shoulder Elbow Surg 27:e357–e366
Beeler S, Leoty L, Hochreiter B, Carrillo F, Götschi T, Fischer T, Fürnstahl P, Gerber C (2021) Similar scapular morphology in patients with dynamic and static posterior shoulder instability. JSES Int 5:181–189
Camenzind RS, Becerra JM, Gossing L, Serane-Fresnel J, Wagner ER, Lafosse L (2021) Acceptable Long-Term Outcomes of Arthroscopic Bone Grafting for Recurrent Posterior Shoulder Instability: Minimum Follow-Up of 5 Years. Arthroscopy 37:816–823
Domos P, Checchia CS, Walch G (2018) Walch B0 glenoid: pre-osteoarthritic posterior subluxation of the humeral head. J Shoulder Elbow Surg 27:181–188
Donohue KW, Ricchetti ET, Ho JC, Iannotti JP (2018) The Association Between Rotator Cuff Muscle Fatty Infiltration and Glenoid Morphology in Glenohumeral Osteoarthritis. J Bone Joint Surg 100:381–387
Ernstbrunner L, Häller T, Waltenspül M, Wieser K, Gerber C (2020) Posterior Open-wedge Osteotomy and Glenoid Concavity Reconstruction Using an Implant-free, J-shaped Iliac Crest Bone Graft in Atraumatic Posterior Instability with Pathologic Glenoid Retroversion and Dysplasia: A Preliminary Report. Clin Orthop Relat Res 479:1995–2005
Gerber C, Sigrist B, Hochreiter B (2023) Correction of Static Posterior Shoulder Subluxation by Restoring Normal Scapular Anatomy Using Acromion and Glenoid Osteotomies: A Case Report. JBJS Case Connect 13(2). https://doi.org/10.2106/JBJS.CC.23.00060. ahead of print
Hawkins RJ, Belle RM (1989) Posterior instability of the shoulder. Instr Course Lect 38:211–215
Imhoff FB, Camenzind RS, Obopilwe E, Cote MP, Mehl J, Beitzel K, Imhoff AB, Mazzocca AD, Arciero RA, Dyrna FGE (2019) Glenoid retroversion is an important factor for humeral head centration and the biomechanics of posterior shoulder stability. Knee Surg Sports Traumatol Arthrosc 27:3952–3961
Jacxsens M, Karns MR, Henninger HB, Drew AJ, Tongel AV, Wilde LD (2018) Guidelines for humeral subluxation cutoff values: a comparative study between conventional, reoriented, and three-dimensional computed tomography scans of healthy shoulders. J Shoulder Elbow Surg 27:36–43
Klemt C, Prinold JA, Morgans S, Smith SHL, Nolte D, Reilly P, Bull AMJ (2018) Analysis of shoulder compressive and shear forces during functional activities of daily life. Clin Biomech (Bristol, Avon) 54:34–41
Ludewig PM, Phadke V, Braman JP, Hassett DR, Cieminski CJ, LaPrade RF (2009) Motion of the Shoulder Complex During Multiplanar Humeral Elevation. J Bone Joint Surg 91:378–389
Meyer DC, Ernstbrunner L, Boyce G, Imam MA, Nashar RE, Gerber C (2019) Posterior Acromial Morphology Is Significantly Associated with Posterior Shoulder Instability. J Bone Joint Surg 101:1253–1260
Meyer DC, Riedo S, Eckers F, Carpeggiani G, Jentzsch T, Gerber C (2018) Small anteroposterior inclination of the acromion is a predictor for posterior glenohumeral erosion (B2 or C). J Shoulder Elbow Surg 28:22–27
Ortmaier R, Moroder P, Hirzinger C, Resch H (2017) Posterior open wedge osteotomy of the scapula neck for the treatment of advanced shoulder osteoarthritis with posterior head migration in young patients. J Shoulder Elbow Surg 26:1278–1286
Selecky MT, Tibone JE, Yang BY, McMahon PJ, Lee TQ (2003) Glenohumeral joint translation after arthroscopic thermal capsuloplasty of the posterior capsule. J Shoulder Elbow Surg 12:242–246
Walch G, Ascani C, Boulahia A, Nové-Josserand L, Edwards TB (2002) Static posterior subluxation of the humeral head: An unrecognized entity responsible for glenohumeral osteoarthritis in the young adult. J Shoulder Elbow Surg 11:309–314
Walch G, Boulahia A, Boileau P, Kempf JF (1998) Primary glenohumeral osteoarthritis: clinical and radiographic classification. The Aequalis Group Acta Orthop Belg 2:46–52
Walker KE, Simcock XC, Jun BJ, Iannotti JP, Ricchetti ET (2018) Progression of Glenoid Morphology in Glenohumeral Osteoarthritis. J Bone Joint Surg 100:49–56
Weishaupt D, Zanetti M, Nyffeler RW, Gerber C, Hodler J (2000) Posterior glenoid rim deficiency in recurrent (atraumatic) posterior shoulder instability. Skeletal Radiol 29:204–210
Acknowledgements
We would like to thank Tobias Götschi for his support in the statistical analysis of the data.
The authors, their immediate families, and any research foundations with which they are affiliated have not received any financial payments or other benefits from any commercial entity related to the subject of this article.
Funding
This study was internally funded by the Balgrist University Hospital. No funding or grants were obtained.
Author information
Authors and Affiliations
Contributions
BH: substantial contributions to research design, acquisition, analysis and interpretation of data, illustrations, drafting the paper and revising it. SB: substantial contributions to research design and critical revision of paper. SH: substantial contributions to acquisition and analysis of data. BS: substantial contributions to research design and the acquisition of data. JS: substantial contributions to research interpretation of data, illustrations and critical revision of paper. CG: substantial contributions to research design and interpretation of data, supervision and critical revision of paper. The author(s) read and approved the final manuscript.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Approval for the study was obtained from the ethical committee responsible for our institution in Zurich (Basec No. KEK-ZH-Nr.2020–00389).
Consent for publication
All subjects gave informed consent to participate. The study was carried out in accordance with the World Medical Association Declaration of Helsinki.
Competing interests
The authors declare that they have no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The original online version of this article was revised: The author reported that the cited number of the ethical approval “2020-01558” is incorrect. It should be corrected to “2020-00389”.
Supplementary Information
Additional file 1: Videos1-4. The pressuredistribution on glenoid and acromion surfaces was assessed by separatemeasurements using TekScan 4000 pressure sensors (TekScan Inc., South Boston,Massachussetts, USA). One-point calibration of the sensors with 50 N wasperformed using a custom-built jig mounted on a material testing machine (Z010TH, ZwickRoell, Ulm, Germany). The pressure sensors were placed in astandardized manner on the glenoid in supero-inferior alignment and on theundersurface of the acromion in anteroposterior alignment. The pressure sensorswere placed so that they were flush with the postero-inferior margin on boththe glenoid and acromion, and were secured in place with bi-adhesive tape. Thepressure sensors were used to verify acromion contact and document the path ofthe humeral head on the glenoid as well as the lower surface of the acromion.Data was not evaluated quantitively.Videos 1 and 2 show the “normal” and Videos 3 and 4 show the “B1” modelin 35° and 60° of glenohumeral flexion. Note the superior starting point in the“normal” model, which is attributable to the greater upward tilt of theglenoid. This leads to relatively more posterolateral acromial coverage of thehumeral head. The “B1” model shows significantly more posterior translationuntil acromion contact. The contact area of the humeral head with the acromionis further lateral and inferior compared to the “normal” model. Furthermore,the pathological model dislocates in 60° of glenohumeral flexion whereas the“normal” model does not.
Additional file 2.
Additional file 3.
Additional file 4.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Hochreiter, B., Beeler, S., Hofstede, S. et al. Posterior stability of the shoulder depends on acromial anatomy: a biomechanical study of 3D surface models. J EXP ORTOP 10, 59 (2023). https://doi.org/10.1186/s40634-023-00623-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s40634-023-00623-x