Introduction

Both remote sensing and animal tracking technology have recently experienced major advances which has the potential to facilitate integrated analyses of environmental and animal movement data in unprecedented detail [1,2] Correspondingly, statistical analyses have advanced to quantify spatial patterns, to account for processes on different scales and for spatial autocorrelation in animal movement data [3]. Improvements in sensor tracking technology, e.g., Global Positioning System (GPS) data, provide animal movement data that capture movement paths (i.e., time series) in ecological landscapes, an improvement over “timeless” position clusters [1]. These advances provide many opportunities, but also challenge the scientific community of movement ecology as acknowledge with special issues in two leading international journals [1,2]. In parallel, remotely-sensed data from different satellite sensors have been available since the 1970s at a wide range of spatial and temporal resolutions, providing a better match to various scales of animal movement. A key challenge to overcome, however, is the time lag between the availability of new remotely-sensed products and their application in ecological research and management. Minimizing this temporal disconnection requires closer collaboration between wildlife ecologists and remote sensing experts to facilitate more rapid implementation of geospatial data processing (sensu [4]).

Analyses of animal movement pathways can increase understanding of resource utilization and dispersal dynamics among populations over time, and can ultimately aid animal conservation and management [5]. While habitat analyses tend to overlook the temporal aspects of habitat use, analyses of animal movement pathways (trajectories) integrate each animal location into the larger context of the spatial distribution of the population and changing environmental conditions through time, as well as individuals’ constraints, behavior, and survival [5-7]. Animal movement over time is a result of decision-making among behavioral trade-offs, considering animals’ internal state, motion, navigation, and external factors [8]. Today, sensor technology can link physiological data such as body temperature and heart rate to movement data, thereby directly linking animals’ physiological conditions and movement behavior to landscape features [9]. Movement path analyses (such as state-space models or step selection functions) track animal resource selection over time [10,11], and require increasing application of dynamic environmental covariates to better understand the mechanism for animal movement behavior.

Animals interact with their environment at multiple spatiotemporal scales, resulting in different movement modes [12,13]. Fine-scale temporal movement data reveal functional landscape connectivity by distinguishing movement corridors, barriers, or stop-over-sites, thereby helping to identity areas critical for mammalian and avian movement [14-18]. Fine-scale data also capture residency times and site fidelity, and can identify critical resources such as water or resting sites [19,20]. At broader scales, pathway analysis can distinguish between migration, nomadic behavior, and dispersal [21], which affects population dynamics, resource utilization, gene flow among populations (e.g. [5]), and the spread of diseases [22].

New remotely-sensed data better capture both the temporal dynamics of landscapes and the three-dimensional structure of habitats. In contrast to field-collected point data, which are typically information-rich but spatially-sparse, remotely-sensed data typically provide spatially continuous data over larger areas, but less information for any given point or pixel due to their relatively coarser resolution. This means that the different spatiotemporal scales at which animal movement occurs require different types of remotely-sensed data to understand the underlying causes of movement (Figure 1 [7,23]). However, there is an inherent trade-off between fine-but-infrequent (i.e., fine spatial but coarse temporal grain) versus coarse-but-frequent (i.e., coarse spatial but fine temporal grain) data recorded by different satellite sensors (Figure 1; Table 1). More specifically, if the goal is to understand fine-scale movement patterns, fine-but-infrequent data are arguably most useful, because they provide the detail necessary to gain insight into the drivers of movement patterns and because temporal variation of the environment such as land cover or phenology matters less over shorter time spans (see e.g. [13,24-28]). In contrast, to understand fine-scale movement patterns of flying animals, highly frequent information about weather and wind condition is needed because the fine details of e.g., atmospheric turbulence that shape the movement patterns can change very rapidly [29,30]. On the other hand, when broad-scale movement patterns are studied, temporal change in the environment is the key and coarse-but-frequent data are better covariates of movement (e.g. [31]).

Figure 1
figure 1

Scales of current resolution in space and time of animal movement and remotely-sensed data.

Full size image
Table 1 Source and resolution of different remote sensing products
Full size table

Our goal here was to provide a review for movement ecologists who are less familiar with the variety of remotely-sensed data available and their application in animal movement studies, reducing the present time lag in application of available remotely-sensed products in animal movement studies [4]. Thus, we first review the current applications of remotely-sensed ecological indices that deal with vertebrate movement patterns in terrestrial systems. Second, we introduce newly-available remotely-sensed products and discuss the opportunities that they provide for animal movement studies. We focused on studies that link animal locations and remotely-sensed data in terrestrial ecosystems, published between 2002 and 2013 (Table 2). Specifically, the studies we reviewed investigated how animals interact with their terrestrial environment over time, and are based on trajectories and range shifts by individuals and populations, thereby potentially aiding conservation and management. Current animal movement studies are heavily biased towards larger-bodied animals due to the weight and size of tracking devices. While there is a history of radio-tracking and linking large-bodied seabird movement to environmental features, it has only recently become possible to equip small-bodied terrestrial avian migrants with devices capable of tracking long-range movements [32,33]. Consequently, our review focuses largely on movement studies of large-bodied mammalian species.

Table 2 Sample of ecological animal movement studies that apply remotely-sensed products
Full size table

Review

Remotely-sensed products commonly used in ecological animal movement studies

The studies of small-scale movement that we reviewed included data about land cover, infrastructure, and terrain, and less often data on vegetation phenology, climate and weather (Table 2). Surprisingly, we found that even long-term, small-scale movement studies seldom applied multiple years of land cover data, although the satellite data from which they are derived, i.e. Landsat imagery, are available continuously since the 1970s (but see [15,34,35]). Moving beyond a single-date snap-shot of a given environmental situation towards incorporation of multiple years of data could help to detect land use change [36] which influences animal movement. Studies that analyzed animal movement at coarser scales (e.g., migration) often used data on vegetation phenology (e.g., the Normalized Difference Vegetation Index (NDVI)), sometimes combined with climate, weather, and terrain data (Table 2). While the use of land cover data from multiple dates was rare, phenology was typically included from multiple dates (Table 2). Unfortunately, we also found that ecological studies frequently lacked details regarding the origin of the satellite data, and the spatial and temporal resolution of the products that had been analyzed (e.g., land cover data; Table 2). This lack of information makes it difficult to determine, for example, if the resolution of the remotely-sensed products matches the resolution of the animal location data and is suitable to address the study question, ultimately impeding the readers’ interpretation of results [18].

Land cover data are typically derived from fine-but-infrequent remotely-sensed products and researchers can use them to infer animal movement patterns on finer spatial scales (Figure 1). To suggest appropriate conservation actions based on studies of movement, it is important to relate animal movement to land cover and land use, and to understand animals’ use of the landscape, such as, the reluctance of dispersing North Island robins Petroica longipes to cross pastures, or elephants’ Loxodonta africana need to be close to water resources during the dry season [24,35]). Ancillary data can capture land use change and infrastructure development and can help to update remotely-sensed maps, thereby creating dynamic landscape data [15]. Of the studies we reviewed, Landsat or aerial photographs were the most common source. Images provided by Google Earth (i.e., satellite data from Landsat, IKONOS, and Quickbird) provide a visualization tool, and have been used to understand habitat use during avian migration for Veery Catharus fuscescens [37], but are not suitable for analyses requiring image manipulation.

Digital elevation models (DEM) provide fine-but-infrequent information on altitude, aspect, and slope, as well as soil wetness and solar radiation, and have been applied in different ways. DEMs are sometimes combined with coarse-but-frequent remotely-sensed atmospheric variables such as wind speed, turbulent kinetic energy, temperature, and cloud height (e.g., 8-day moderate-resolution Imaging Spectroradiometer (MODIS) products, monthly WorldClim data, or 10-day National Oceanic and Atmospheric Administration data (NOAA; i.e., the Advanced Very High Resolution Radiometer (AVHRR); Table 2). DEMs can be a powerful tool and the interpretation of observed patterns can contribute to inference of migratory strategies, for example disentangling species-specific specialization to uplift modes in soaring birds such as Turkey vultures Cathartes aura and Golden Eagles Aquila chrysaetos [29]. The analysis of digital elevation and climatic data in relation to animal movement data highlights that topographic variability and winter severity affect migratory behavior in ungulates such as roe deer Capreolus capreolus, and their opportunistic migration behavior when there are no predictably extreme winter conditions [38].

Human infrastructure influences many wildlife species’ habitats. Infrastructure can create barriers and can modify daily and seasonal movement patterns. For example, gray wolves Canis lupus cross highways less frequently with increasing human presence [39], human settlements disrupt African elephant Loxodonta africana movement [40], and distance to fences affects African buffalo Syncerus caffer migrations [41]. In hunted species, infrastructure can also affect temporal movement patterns, e.g., brown bear Ursus arctos and moose Alces alces avoid roads during the day [42,43]. On the other hand, some species associate preferentially with infrastructure, for example to facilitate movement, as in the case of the American bison Bison bison [44]. Digital maps of infrastructure are fine-but-infrequent data, and typically derived from land cover data and aerial photos. The use of high spatial resolution imagery and LiDAR (Light Detection and Ranging; pulsed laser signals that measure distances to the earth surface and thereby generate information about the shape of the surface; http://oceanservice.noaa.gov/facts/lidar.html) also provides opportunities to discriminate between different types of human infrastructure and vegetation, such as highways, roads, railroads, pipelines, power-lines, houses, and trees (e.g. [45-48]). In high-resolution satellite imagery, the number of lanes of a given road is easily determined, and LiDAR data can detect roads even under dense forest canopies [49]. Governments and private companies use LiDAR and high spatial resolution data to map human infrastructure for large areas, and the resulting maps can be useful for understanding wildlife movement. Understanding road-crossings, the impact of road density and movement barriers such as wildlife fences, and exploitation or avoidance of road-near habitats, provides insights important for wildlife conservation and management (e.g., elk Cervus elaphus [34]; African elephant [35]; roe deer [50]; Grizzly bear Ursus arctos [51]; Black bear Ursus americanus [52]).

Plant phenology, the annual dynamics of vegetation greenness, can be tracked using NDVI and the Enhanced Vegetation Index (EVI) [53,54], although NDVI is more commonly applied in animal movement studies (see review by [55]). Phenology indices are typically derived from coarse-but-frequent satellite imagery, such as 10-day Satellite Pour l’Oservation de la Terre (SPOT) or 16-day MODIS reflectance data, and can be applied to predict individual and population movement and distribution. Yet animal movement ecologists need to consider the different interpretation of traditional phenology and satellite-based landscape phenology; while traditional phenology tracks e.g. flowering and budding of single plant species, satellite-based phenology quantifies dates of greening and browning patterns of multiple plant species at the landscape scale [56,57]. The analysis of variation in broad-scale landscape predictability is useful for gaining insights into long-distance movements in ungulates such as migration, nomadism, and residency [31]. Vegetation proxies such as NDVI also provide opportunities for applications in environmental conservation and paleoecology, and for predictions of past and future population and biodiversity response to climate, phenology, and primary production [55]. In our sample of studies, plant phenology data were commonly used to understand broad-scale migration patterns. For example, new forage growth is important for ungulate and avian long-distance migration (e.g., wildebeest Connochaetes taurinus [58]; Bobolink Dolichonyx oryzivorus [59]), and environmental conditions en route affect arrival at the breeding grounds of migratory bird species [60]. NDVI is particularly useful for movement studies in highly seasonal ecosystems (e.g., African elephants move more randomly when forage is abundant [61]). The occurrence of fires affects plant phenology and modifies animal movement (e.g., African buffalo [41]). MODIS fire detection data are available from 2001 to present, and may facilitate reconstruction of prior habitat conditions [62]. The combination of vegetation indices (e.g., NDVI) with precipitation data (e.g., TRMM (Tropical Rainfall Measuring Mission)) improves the prediction of the timing and speed of migrations (e.g., zebra Equus burchelli antiquorum [63]). For vertical migration, i.e., along an elevational gradient, vegetation proxies combined with DEM can predict seasonal movement that follows vegetation growth at different elevation (e.g., for elephants [64]). For birds, combination of NDVI and weather data such as wind and temperature generates fruitful environmental indices helping to understand global long-term movement patterns (e.g., vultures [65]). Furthermore, new products, such as global data on soil moisture (SMAP, Soil Moisture active Passive, newly launched, http://smap.jpl.nasa.gov/) and the Global Precipitation Measurement (GPM, planned for the near future, http://www.nasa.gov/mission_pages/GPM/main/#.VNtBJy7s7FQ) provide exciting opportunities to improve our understanding of the drivers of animal movement.

Productivity, i.e., seasonal plant growth, can be calculated by merging information from ground biomass measurements and MODIS-derived NDVI, and can predict, e.g., movement patterns of elk at different scales, demonstrating the connection between migration and access to higher-quality forage [66]. With its temporal resolution of typically 10–16 days, NDVI has been used to infer fine-scale movement patterns related to vegetation greenness, where it may represent a static habitat index rather than a phenological index (e.g., forage availability does not affect within-patch movement in sheep Ovis aries [67], but affects migration speed across patches (i.e., stop-over-sites) in mule deer Odocoileus hemionus [16]).

Climate and weather indices provide information about precipitation (i.e., rainfall and snow from 10-day NOAA, 8-day MODIS, and monthly WorldClim data) and temperature (e.g., 10-day NOAA), and are generally coarse-but-frequent indices. It is important to distinct between climate and weather. Climate describes the average pattern of meteorological variables such as temperature, wind, precipitation over longer time in a given area. In contrast, weather describes the short-term variations of those meteorological variables. In the context of animal movement, climate affects animals at a broader scale and can, for example, cause seasonal migration. Precipitation and temperature are particularly important determinants of animal movement patterns in seasonal ecosystems (e.g., rainfall and snow influence migration patterns in Saiga antelope Saiga tatarica tatarica [68] and roe deer [38]; Table 2). Weather, on the other hand, affects short-term movement such as daily movement. In flying animals, dynamics in diurnal weather conditions generate complex environmental conditions that affect animals’ movement patterns (e.g., thermal conditions generate inter-specific migration strategies and movement behavior in soaring birds [29,69-71], wind drift such as tail- or crosswinds affect flying patterns in fruit bats Eidolon helvum [72], and temperature and turbulent kinetic energy affect bee-eater Merops apiaster flight mode [73]. Climate and weather indices provide information about precipitation (i.e., rainfall and snow from 10-day NOAA, 8-day MODIS, and monthly WorldClim data) and temperature (e.g., 10-day NOAA), and are generally coarse-but-frequent indices.

In summary, inclusion of remotely-sensed data can greatly improve our understanding of the drivers of animal movement and provide novel insights about movement strategies across species and ecosystems. The main environmental indices are available from a broad range of remotely-sensed products that can vary in precision, and accuracy (Table 3). The set of studies that we reviewed reflected the current application of remotely-sensed data in animal movement studies. Single-date Landsat imagery was a common source of land cover information. Terrain data combined with climate and weather data were powerful tools for inferring migration patterns. Yet, movement ecologists should critically weigh which remotely-sensed product best fits their scale of analysis (i.e., fine-but-infrequent versus coarse-but-frequent), and more importantly, should avoid the expectation that remotely-sensed data are equivalent to field-collected data. On the other hand, field-collected data will never match the spatial continuity of remotely-sensed data collected over large areas. Remotely-sensed and field-collected data have unique strengths, and their integration allows unique insights.

Table 3 Precision and accuracy of main remotely-sensed derived products
Full size table

Opportunities for remotely-sensed products in ecological studies of animal movement

Increasing access to remotely-sensed data

High spatial resolution imagery is recorded by sensors such as IKONOS, QuickBird, OrbView-3 and Spot-5, with spatial resolutions from 0.5 - 10 m ([74]; Table 1). High-resolution imagery allows the identification of small habitat features such as infrastructure (e.g. [75]), riparian corridors (e.g. [76,77]), and individual trees (e.g. [78]). Knowledge of specific environmental features is often critical for understanding animals’ response to landscapes (see [79]), and improves our insight into species’ ecology (e.g. [20,50]). Although the cost of high spatial resolution imagery can be a limitation, cost has declined as more sensors have launched and increased competition [74]. Furthermore, in many areas high-spatial resolution images are available for free, thanks to web-mapping sites such as Google Earth (http://earth.google.com).

However, high-resolution imagery is not available everywhere and imagery archives are limited. In contrast, Landsat satellite imagery is available for free, and archives span 40 years, making Landsat the most commonly used satellite imagery for monitoring land cover [80], and in ecological studies (e.g. [81,82]; Table 1). The launch of the Landsat 8 satellite in February 2013 ([83]; Table 1), together with the planned Sentinel satellites of the European Space Agency [84], promises a new era in which 30-m resolution Landsat-like satellite data are available every two to three days, i.e., with similar temporal resolution as currently available for 500–1,000 m resolution MODIS and VIIRS.

Raw reflectance data (i.e., unclassified data), as an alternative to traditional classified land cover data or calculated indices such as NDVI, experience increasing interest for predicting animal distribution. They overcome classification errors and can provide better predictive ability – even at fine resolution – than more commonly-used remotely-sensed products (see for example in birds [85]).

A computational challenge for many movement ecologists is the integration of these remotely-sensed data sets into animal movement data sets, as remote sensing data often are provided using complex tiling systems in space and time [86]. Further, these data sets often vary in source, format, and projection system, making it difficult if not impossible for anyone others than remote sensing experts to make use of directly. However, new tools are emerging for movement ecologists which greatly automate and simplify the computation and integration [86]. In movement data portals, linking of environmental data to animal movement data is a general trend, making a variety of remotely-sensed products readily available for animal movement ecologists; e.g. through the Env-DATA system in Movebank ([86]; https://www.movebank.org), as a direct link in Eurodeer ([38]; www.eurodeer.org), or under development in Wireless Remote Animal Monitoring ([87]; WRAM).

Capturing the temporal dynamics of landscapes

The use of high temporal resolution satellite data offers new possibilities for animal movement studies as it means increased opportunities for matching satellite imagery with concurrent high resolution animal location data, and captures many temporal dynamics of landscapes (e.g., phenology, land use change, disturbances). In particular, long-term animal monitoring projects can take advantage of analyzing movement patterns in dynamic landscapes to better understand the impact of a given change and its consequence for management and conservation [88,89].

For studying fine-scale animal movement, an exciting advancement is the automated analysis of dense time series of Landsat images. In the past, studies rarely incorporated more than a few Landsat images due to cost and processing limitations. Since Landsat data became freely available in 2008, new image processing algorithms have been developed that analyze many decades of annual Landsat imagery simultaneously [90,91]. The great advantage of such dense time series (or ‘time stacks’) is in identifying changes, such as forest clear-cuts that can be detected immediately after the disturbance occurs, but can be missed if images are years apart. Software that analyses forest disturbance from dense time series of LANDSAT imagery includes Vegetation Change Tracker (VCT [90]) and LandTrendr [91]. Dense time series have also been used to monitor desertification [92] and urban development ([93]; Table 1).

For analysis of coarse-scale animal movement, indices of vegetation phenology can be informative [55]. Satellite sensors such as MODIS, AVHRR, VEGETATION, and the recently launched VIIRS provide daily imagery, typically summarized in 8- or 16-day composites that are relatively cloud-free (Table 1). However, composites may contain some erroneous NDVI values, and analyzing dozens of satellite images for a given year is computationally and logistically challenging. Thus algorithms that fit phenology curves to a time series of NDVI data and estimate parameters such as the onset of greenness, or the range of NDVI for each pixel are a major advancement [94,95]. By fitting a curve, the effects of outliers are reduced, reduce data volumes of phenology indices, and offer ecologically meaningful measures of vegetation change over time. One software package for phenology analysis is TIMESAT (http://www.nateko.lu.se/TIMESAT; version 3.0 [94]); MODIS phenology products are also available (https://lpdaac.usgs.gov/products/modis_products_table/). Substantial work has been done to unify data from older and new sensors to establish consistency in time series data [96] and improve phenological assessment through Landsat-MODIS fusion [97].

Although NDVI is the most commonly used index in ecological applications of remotely-sensed data, there is also a broad range of spectral indices that can be derived from satellite data (e.g. chlorophyll, foliage, surface moisture [98,99]) as well as ready-to-use products (e.g. Gross and Net Primary Productivity from MODIS) that offer opportunities for animal movement studies. The spectral fidelity (the number of spectral bands, and bandwidths) of remotely-sensed data is becoming increasingly important, as it is now possible to map individual plant species and nitrogen content of grazing lands. For example, RapidEye sensors provide high-resolution satellite images in which the Red-Edge band is sensitive to chlorophyll content and leaf structure (http://blackbridge.com/rapideye/). RapidEye data are at the cutting-edge of geospatial data, because of their ability to describe foliar nitrogen at impressive resolutions [100], which can help to understand herbivore distribution in grazing systems.

Characterizing the 3d strcuture of habitats

The 3D structural characteristics of vegetation are important determinants of animals’ space use [4]. For example, visibility at ground level and canopy cover affect selection of daytime bedding sites (e.g., brown bears [20]). Unfortunately, remotely-sensed products commonly used in animal movement studies, i.e., Landsat and MODIS imagery, are not well suited to quantify vegetation structure, resulting in a resolution gap between the movement data and the remotely-sensed vegetation indices.

LiDAR is a relatively new technology that uses a laser to measure the vertical and horizontal structure of ecosystems ([101]; Table 1), making it possible to characterize animal habitats in novel ways [102]. LiDAR data provide direct information about vegetation height [103] and canopy closure [104], and indirect information about forest age [105], canopy gaps [106], and large trees [107]. The ability of LiDAR to “see through” the forest canopy allows the characterization of topography and understory vegetation, important to many animal species [108]. For these reasons, LiDAR data are great predictors of species habitat use [102], and can track herbivore activity e.g., treefalls by elephants [109]. However, their utility for movement pathway studies still needs to be fully explored (but see [110] for lion Panthera leo hunting strategies and for predation risk in roe deer [111]). Most LiDAR data stem from airborne platforms, and are thus costly to obtain. As a result, the application of LiDAR data in ecological movement studies will likely depend on available LiDAR data from other projects for the foreseeable future. However, as more LiDAR platforms become available, costs are likely to decrease, and accessibility of LiDAR products will increase.

Environemntal real time assessment

Finally, scientists and managers are exploring the use of low-cost pre-programmed or remote-controlled drones equipped with video and photo cameras, as alternative ways to survey landscapes, count animal populations, and monitor human activities (see http://www.fort.usgs.gov/RavenA; e.g. [112]). This environmental assessment in real-time provides exciting opportunities for animal movement studies. Weather surveillance radars track arrival of migratory birds and thereby assess quantitative data on bird distribution, helping to identify migratory stopover over broad geographic areas in real-time [14,113].

Model reanalysis products

In addition to the technologies and products outlined before, there is a growing number of efforts to reanalyze remote sensing and weather data to derive consistent, long-term, global or regional environmental products at low to medium (12–1000 km) spatial resolution, but very high (1–24 h) temporal resolution. Examples include the North American Regional Reanalysis (NARR), the NOAA global weather reanalysis (NCEP Reanalysis 2), and the European weather reanalysis (ECMWF) for weather data, or the Oregon University Ocean NPP reanalysis for ocean products. The NASA’s MERRA project, for example, provides consistent information on weather variability from 1979 to the present. Finally, although not a reanalysis product per se, Hansen and co-authors [114], recently mapped global tree cover at yearly time steps between 2000 and 2012 at a spatial resolution of 30 meters, with great potential for animal movement studies.

Potential limitations of remotely-sensed products for studies of movement ecology

As much promise as new remotely-sensed data and methods offer, it is important to recognize inherent limitations of these approaches. One important issue is that of errors, uncertainties, and accuracies in remotely-sensed products [115,116]. No land cover classification is perfect, and this can introduce errors in models of animal movement. Closely related to the question of accuracy is the question of the thematic resolution, i.e., the number of land cover classes, which for ecological applications often needs to be high. However, the classification accuracy decreases as more land cover classes are mapped. In the 2006 National Land Cover Dataset (NLCD), for example, forest as a single class has a user accuracy of 93%, but coniferous, deciduous and mixed forests each had accuracies of 81-85% [117]. Some land cover classes are more challenging to map than others; in the NLCD, for example, wetlands user accuracy was <40%. Spectral indices such as NDVI, on the other hand, are mathematical formulas and as such do not have a classification error, but require validation due to e.g. sensor errors or atmospheric contamination [118,119].

Movement ecologists that apply remotely-sensed products to animal movement data also need to consider spatial autocorrelation that are inherent in the data. Advances in statistical tools help to discover spatial patterns and to correct for autocorrelated data, e.g., in mixed models with help of correlation structures [3,120]. Patterns of autocorrelation in animal movement behavior themselves provide valuable information, and are used to better understand the mechanisms of animal movement [121].

The spatial resolution of the satellite data is another critical issue that is pertinent when analyzing fine-scale movement data. First, the size of the pixels, which tend to be 250–1,000 m for those satellites that provide daily observations, are far coarser than GPS-collar-based movement data. Secondly, the smallest observable feature that can reliably be mapped (i.e., the minimum mapping unit) is considerably larger than the pixel size (typically at least four pixels). This means that only Quickbird or Worldview data can detect habitat features of 1–5 m2, compared to minimum mapping units of 3,600 m2 for Landsat imagery, and 250,000 m2 for MODIS data. As movement ecology advances, and integrates more remotely-sensed data, it will be important to keep these inherent limitations of satellite data in mind, and to avoid the temptation to try to obtain more information from the imagery than it contains.

Conclusions

Animals move in response to environmental changes, and to fulfill their varying needs for environmental resources over days, weeks, and years. New generations of remotely-sensed products with better spatiotemporal resolution provide great opportunities for insights into animal movement, as they characterize environmental patterns such as temporal dynamics of landscapes and three-dimensional structures of habitats. To capture these dynamics and to improve predictive ability, we recommend that researchers analyze time series of remotely-sensed products, as they can capture environmental dynamics that determine movement responses. The integration of landscape dynamism in movement studies becomes particularly important with respect to meeting the conservation and management challenges of future landscape change and corresponding changes in animal movement in space and time. To be able to provide realistic foundations for management and conservation, movement ecologists need to increase their application of dynamic environmental information when analyzing animal movement. With new tools emerging to automate the integration of remotely-sensed data with animal movement data sets, former computational challenges can be overcome, making environmental data more easily accessible for movement ecologists. Yet, the increasing possibilities of integrated analyses of remotely-sensed products and animal movement data presents new challenges to match these types of data logically, bearing in mind the inherent trade-offs posed by the different resolutions. It is important to critically weigh which remotely-sensed product is best suited for a given scale of analyses (e.g., fine-but-infrequent versus coarse-but-frequent or minimum mapping unit) and how its limitations may affect inferences. Closer collaboration between ecologists and remote sensing experts can facilitate the use of newly available products in movement studies, and minimize the time lag of applying these products in ecological research.