Background

Fumarate is a key intermediate in the tricarboxylic acid cycle (TCA) to link carbon and nitrogen metabolism, which has a variety of applications in many fields, such as food, pharmaceutical, bioplastic, and chemical industries [1]. Recently, fumarate is mainly produced through three major metabolic pathways, including the reductive TCA cycle [2], the oxidative TCA cycle [3], and the noncyclic glyoxylate cycle [4]. The maximum theoretical yield of fumarate is 2 mol/mol glucose in reductive TCA cycle, but its fumarate productivity is limited due to two reversible reactions catalyzed by malate dehydrogenase and fumarase [5]. Based on this reductive TCA cycle, fumarate productivity was increased to 0.30 g/L/h by combinatorially regulating the expression of phosphoenolpyruvate carboxykinase and formate dehydrogenase [5]. In addition, fumarate production via the oxidative TCA cycle provides a maximum theoretical yield of 1 mol/mol glucose due to its release of 2 CO2. Based on this oxidative TCA cycle, Escherichia coli CWF812 was able to produce 28.2 g/L with its productivity 0.448 g/L/h by deleting the iclR, fumABC, arcA, and ptsG genes and overexpressing the native ppc gene [6]. As for the noncyclic glyoxylate cycle, the maximum theoretical yield of fumarate is 1 mol/mol glucose. Although this pathway has shown its promising applications in improving the productivity of carboxylic acids [7], only few studies have focused on this pathway for fumarate production [8].

Two of the challenges in metabolically engineering the noncyclic glyoxylate cycle for fumarate production are how to identify and remove its potential bottlenecks and how to engineer and improve its transmission efficiency. Both challenges may benefit from the development of systems biology and synthetic biology. To identify and remove potential bottlenecks, several strategies have been developed, such as dynamic pathway analysis [9], X-omic technology [10], reverse metabolic engineering [11], in vitro metabolic engineering [12], and CRISPRi system [7]. To engineer and improve its transmission efficiency, many strategies have shown great potential, such as periplasmic engineering [13], mitochondrial engineering [14], DNA scaffold [15], protein scaffold [16], enzyme engineering [17], modular pathway engineering [18].

Escherichia coli is a well-established model microbe for industrial application, and it possesses many advantages. Many strategies in metabolic engineering and synthetic biology can be efficiently applied for genetic manipulation in E. coli. In addition, simple salt medium or cheap medium can be used for cell growth and the biosynthesis of high-value chemicals. Moreover, E. coli is particularly suitable for the production of carboxylic acids, such as lactate [19], pyruvate [20], and α-ketoglutarate [21]. Thus, E. coli is an attractive candidate for microbial engineering of C4-dicarboxylic acids production, due to the fact that it can provide a large amount of precursors (pyruvate or α-ketoglutarate) for the biosynthesis of C4-dicarboxylic acids such as fumarate [22], succinate [23], and malate [7]. Based on this observation, E. coli has a great potential in engineering the transmission efficiency of synthetic pathway to achieve high-level production of fumarate.

In this study, Escherichia coli W3110 was used as a host strain to rewire the noncyclic glyoxylate pathway for fumarate production (Fig. 1). Pathway optimization was conducted to identify and remove the potential bottlenecks, and then improve the transmission efficiency of intermediate metabolites. Further, transporter engineering was applied to enhance the transmission efficiency of targeted metabolites. Based on these strategies, the transmission efficiency of synthetic pathway was boosted, and the final engineered strain, E. coli W3110△4-P(H)CAI(H)SC, produced 22.4 g/L fumarate.

Fig. 1
figure 1

Major metabolic pathways for the formation of fumarate in E. coli. PEP: phosphoenolpyruvate; ldhA: lactate dehydrogenase; pflB: pyruvate formate lyase; poxB: pyruvate oxidase; pta: phosphotransacetylase; ackA: acetate kinase A; PYC: pyruvate carboxylase; CS: citrate synthase; ACN: aconitase; ICL: isocitrate lyase, SDH: succinate dehydrogenase; fumABC: fumarase; frdBC: fumarate reductase; dcuBC: the C4-dicarboxylate transporter

Results

Rewiring the noncyclic glyoxylate pathway for fumarate production

Escherichia coli W3110△4 was constructed to produce pyruvate, L-malate, and α-ketoglutarate by deleting many genes including ldhA, pflB, poxB, pta, ackA, frdBC, and fumABC (Fig. 1) [24]. To further analyze its phenotypic characteristics, fermentation products of E. coli W3110△4 were measured, and we found that E. coli W3110△4 was able to produce 6.8 g/L pyruvate, 10.5 g/L α-ketoglutarate, and 3.2 g/L fumarate (Fig. 2b). Thus, E. coli W3110△4 was selected as a host strain for further metabolic engineering.

Fig. 2
figure 2

Constructing the noncyclic glyoxylate pathway for fumarate production. a Schematic representation of fumarate biosynthesis through the noncyclic glyoxylate pathway. b Effect of gene expression on the production of organic acids. c The specific activities of AfPYC, EcCS, EcACN, EcICL, and EcSDH. d The expression level of genes AfPYC, EcCS, EcACN, EcICL, and EcSDH. Error bars represent standard deviation from three biological replicates

To rewire the noncyclic glyoxylate pathway for fumarate production, pyruvate carboxylase (AfPYC) [7], citrate synthase (EcCS) [7], aconitase (EcACN) [7], isocitrate lyase (EcICL) [7], and succinate dehydrogenase (EcSDH) [22] were selected and overexpressed in E. coli W3110△4 (Fig. 2a). By overexpressing these five enzymes simultaneously, the specific activities of AfPYC, EcCS, EcACN, EcICL, and EcSDH were increased by 3.3-, 5.5-, 3.3-, 4.3-, and 0.5-fold compared with these of E. coli W3110△4-0, respectively (Fig. 2c). In addition, the expression levels of AfPYC, EcCS, EcACN, EcICL, and EcSDH genes in strain E. coli W3110△4-PCAIS were all upregulated (Fig. 2d). Based on this, the final engineered strain E. coli W3110△4-PCAIS produced 8.7 g/L fumarate, which was 169.3% higher than that of strain E. coli W3110△4-0 (Fig. 2b). In addition, pyruvate and α-ketoglutarate were reduced by 33.3% and 41.4%, respectively, but DCW was increased by 5.6% (Fig. 2b). These results showed that the noncyclic glyoxylate pathway was successfully constructed, and could be used for fumarate production.

Enhancing fumarate production by pathway optimization

To identify the potential bottlenecks in the noncyclic glyoxylate pathway, the expression level of individual enzymes was varied at different levels, while the remaining enzymes were all maintained at a fixed level. Based on this, we analyzed the effect of expression levels of every pathway enzyme on fumarate production, and the potential bottlenecks possibly showed a large variation range in fumarate production.

To demonstrate this idea, the strengths of gene expression were firstly set to three levels: high level (H) with RBS10, medium level (M) with RBS09, and low level (L) with RBS03 [25]. Then, many expression cassettes of AfPYC, EcCS, EcACN, EcICL, and EcSDH were introduced into E. coli W3110△4 to analyze its effects on fumarate production. When AfPYC expression was changed from low to high level, fumarate production was increased from 6.1 g/L to 12.5 g/L with variation range 103.6% (Fig. 3a). Similarly, with the increase of EcICL expression from low to high level, fumarate concentration was improved from 5.5 to 13.4 g/L with variation range 146.1% (Fig. 3a). However, the increasing strengths of EcCS, EcACN, and EcSDH expression showed a 48.7%, 32.1% and 19.1% increase in variation range of fumarate production, respectively (Fig. 3a). To sum up, AfPYC and EcICL expression led to a wider variation range in fumarate production than these of EcCS, EcACN, and EcSDH expression. These results possibly indicated that AfPYC and EcICL expression were the key nodes for further enhancing fumarate production.

Fig. 3
figure 3

Optimizing the noncyclic glyoxylate pathway for fumarate production. a Effect of individual gene expression on fumarate production. b A series of AfPYC and EcICL expression cassettes were designed at different expression levels. c The concentrations of fumarate were achieved by different AfPYC and EcICL expression cassettes. Error bars represent standard deviation from three biological replicates

To further fine-tune the biosynthetic pathway for fumarate production, AfPYC and EcICL expression were optimized in E. coli W3110△4-PCAIS at three levels (H, M, and L) (Fig. 3b). Based on this, various expression cassettes of AfPYC and EcICL were introduced into the engineered E. coli to remove the potential bottlenecks, thus achieving the best distribution of metabolic flux for fumarate production. Finally, by controlling AfPYC and EcICL expression at a high level, fumarate production was increased to 16.2 g/L, which was 87.0% higher than that of strain E. coli W3110△4-PCAIS (Fig. 3c). At the same time, the specific activities of AfPYC and EcICL were increased by 50.5% and 67.2% compared with these of E. coli W3110△4-PCAIS, respectively (Fig. 2c). In addition, the intracellular succinate and oxaloacetate were decreased by 27.3% and 15.9%, respectively (Fig. 4b). However, the engineered strain E. coli W3110△4-P(H)CAI(H)S still accumulated 3.5 g/L pyruvate and 4.1 g/L α-ketoglutarate (Fig. 2b). Thus, there still existed other bottlenecks that need to be removed for further increasing production of fumarate.

Fig. 4
figure 4

Improving fumarate production by transporter engineering. a Schematic representation of the C4-dicarboxylate transporters. b Effect of the C4-dicarboxylate transporters on the concentrations of intracellular fumarate, succinate, and oxaloacetate. c Effect of the C4-dicarboxylate transporters on fumarate production. Error bars represent standard deviation from three biological replicates

Improving fumarate production by transporter engineering

To further improve fumarate production, intracellular metabolites were analyzed for strains E. coli W3110△4-0 and E. coli W3110△4-P(H)CAI(H)S. The concentration of intracellular fumarate in strain E. coli W3110△4-P(H)CAI(H)S was increased by 128.6% compared with that of E. coli W3110△4-0 (Fig. 4b). Additionally, strain E. coli W3110△4-P(H)CAI(H)S showed a 21.2% increase in DCW compared with that of strain E. coli W3110△4-PCAIS (Fig. 2b). These results showed that the pyruvate flux was channelled not only to fumarate, but also to the TCA cycle, indicating that fumarate export probably needs to be engineered to transport fumarate more quickly.

The genes dcuB and dcuC encode the native C4-dicarboxylate transporters, which are used to export fumarate [26] (Fig. 4a). Thus, we tested the effects of dcuB, dcuC, and dcuBC on fumarate production, and the highest concentration of fumarate (18.9 g/L) was obtained with strain E. coli W3110△4-P(H)CAI(H)SC by overexpressing dcuC in strain E. coli W3110△4-P(H)CAI(H)S (Fig. 4c). This fumarate titer was 16.2% higher than that of strain E. coli W3110△4-P(H)CAI(H)S (Fig. 4c). In addition, DCW and the intracellular fumarate in strain E. coli W3110△4-P(H)CAI(H)SC were reduced by 17.5% and 43.8% compared to that of strain E. coli W3110△4-P(H)CAI(H)S, which was similar to that of the control strain E. coli W3110△4-0, respectively (Figs. 2b, 4b). Furthermore, pyruvate and α-ketoglutarate titers were decreased to 3.0 g/L and 3.9 g/L, which were lower than these of strains E. coli W3110△4-0 and E. coli W3110△4-P(H)CAI(H)S, respectively (Fig. 2b). These results indicated that the C4-dicarboxylate transporter was efficient for fumarate export.

Production of fumarate in a 5-L bioreactor

Fumarate production with the optimized strain E. coli W3110△4-P(H)CAI(H)SC was tested in a 5-L fed-batch bioreactor. In this process, fumarate was accumulated gradually, and the maximal concentration of fumarate was up to 22.4 g/L at 60 h, which was 18.6% higher than that in shake flasks (Fig. 5). With the accumulation of fumarate, glucose was consumed rapidly, and nearly depleted at 60 h (Fig. 5). In addition, cell growth was increased continuously, and the maximal DCW was up to 7.8 g/L at 60 h, which showed a 158.3% increase compared to that in shake flasks (Fig. 5). These results indicated that the final strain E. coli W3110△4-P(H)CAI(H)SC has great potential for efficient production of fumarate in fermentation.

Fig. 5
figure 5

Production of fumarate by strain E. coli W3110△4-P(H)CAI(H)SC in a 5-L fed-batch bioreactor. Error bars represent standard deviation from three biological replicates

Discussion

Metabolic engineering is conducted to rewire the complete noncyclic glyoxylate pathway for fumarate production. Recently, five metabolic engineering strategies have been developed to enhance production of fumarate: reconstructing synthetic pathway, such as the reductive TCA cycle [2], the oxidative TCA cycle [3], the noncyclic glyoxylate cycle [4], the urea cycle and the purine nucleotide cycle [27, 28]; eliminating byproducts formation [27], such as lactate, acetate, formate, malate, and succinate; optimizing oxidation and reduction levels [5]; modifying glucose transport system [8]; regulating C4-dicarboxylate transporter [26]. These results indicated that fumarate production has been improved by metabolic engineering strategies. However, in these previous studies, fumarate production was enhanced by constructing the partial metabolic pathway, rather than the complete metabolic pathway, thus resulting in the transmission inefficiency of these synthetic pathways. Among these studies, when the biosynthetic pathway was reconstructed in the evolved mutant E. coli E2 by combining the oxidative TCA cycle and the glyoxylate cycle partially, fumarate production showed a large increase up to 41.5 g/L [4]. The main differences between this previous study and our study are that (i) we constructed the complete noncyclic glyoxylate pathway to produce fumarate, rather than the partial or combined metabolic pathways; (ii) we rationally identified and removed the potential bottlenecks in the complete noncyclic glyoxylate pathway, rather than irrationally redirecting metabolic flux; (iii) we definitely optimized the balance of metabolic pathway, rather than indefinitely distributing carbon flux. To sum up, although fumarate production with E. coli W3110△4-P(H)CAI(H)SC in our study was lower than that of E. coli EF02 (pSCppc) in previous study, we offered rational metabolic engineering and flux optimization strategies for efficient production of fumarate. These strategies have great potential in developing efficient microbial cell factories for production of high-value added chemicals.

Pathway optimization represents one significant step in identifying and removing the potential bottlenecks to improve the transmission efficiency of biosynthetic pathway. To improve the transmission efficiency of intermediate metabolites, the partial noncyclic glyoxylate pathway was constructed by replacing the native PEP-dependent PTSG system with the PEP-independent galactose translocation system, overexpressing phosphoenolpyruvate carboxylase (PPC) and acetyl-CoA synthase, and deleting malate dehydrogenase, fumarate reductase, and fumarase [8]. The final concentration of fumarate (1.53 g/g dry cell weight) was increased by 50% compared with the parental strain. Further, the partial noncyclic glyoxylate pathway was enhanced by overexpressing PPC, succinate dehydrogenase complex, and citrate synthase (CS) [22]. After that, the expression levels of PPC and CS were optimized, and the final strain E. coli CWF4NS (pSynPC39) produced 25.5 g/L fumarate with its productivity of 0.35 g/L/h. These results showed that fumarate production could be improved by engineering the partial noncyclic glyoxylate pathway. However, fumarate production might be further increased by constructing and optimizing the complete noncyclic glyoxylate pathway to reinforce its transmission efficiency. In our study, pathway optimization was successfully applied to identify and remove the potential bottlenecks in the complete noncyclic glyoxylate pathway, and thus improve its transmission efficiency. The optimized strain E. coli W3110△4-P(H)CAI(H)SC was able to produce 22.4 g/L fumarate with its productivity of 0.37 g/L/h. These results indicated that pathway optimization could significantly increase the transmission efficiency of intermediate metabolites. This strategy not only could improve the transmission efficiency of intermediate metabolites, but also could reduce the loss of carbon flux. The increased transmission efficiency of biosynthetic pathway for fumarate production is possibly due to the balanced substrate channeling: (i) the local concentration of intermediates can appropriately meet the need of pathway enzymes by fine-tuning gene expression to balance biosynthetic pathway; (ii) the carbon flux of intermediates is efficiently concentrated on producing fumarate by preventing the competing pathways to reduce carbon loss; (iii) the feedback inhibition of intermediates is successfully circumvented by converting these inhibitors into another valid intermediate rapidly.

Transporter engineering is another useful step in enhancing the transmission efficiency of biosynthetic pathway. Transporters can be rationally regulated to recognize and transport targeted metabolites between inside and outside the cell, which has shown great promise in reducing toxicity and increasing productivity [29]. Recent strategies mainly center on two types: (i) ABC transporters mainly contain an exporter for pumping out the final products [30] and an importer for improving the absorption of substances [31]; (ii) secondary efflux pumps are able to excrete toxic compounds actively [32]. Based on this, to improve the transmission efficiency of targeted metabolites, the C4-dicarboxylate transporters (dcuBC) were overexpressed in E. coli ABCDIA [26], in which the biosynthetic pathway for fumarate production was constructed by combining the urea cycle and the glyoxylate cycle partially [27]. The resulting strain E. coli A-dcuB-Ec only produced 9.42 g/L fumarate with its productivity 0.19 g/L/h [26], possibly due to the fact that there is no complete or efficient biosynthetic pathway to supply enough fumarate to meet the need of transporters, thus reducing the transmission efficiency of targeted metabolites. In our study, transporter engineering was carried out in the engineered E. coli strain harboring the complete noncyclic glyoxylate pathway for fumarate production. Based on this, there is enough intracellular fumarate to be transported outside the cell by dcuBC, and the productivity of fumarate was increased to 0.37 g/L/h. These results indicated that transporter engineering could largely increase the transmission efficiency of targeted metabolites. This strategy not only could prevent fumarate accumulation in the intracellular space, but also could alleviate the toxicity of intracellular fumarate. The improved transmission efficiency of biosynthetic pathway for fumarate production is also possibly due to the fact that dcuBC are efficient for exporting fumarate to prevent self-poisoning and reduce feedback inhibition, thus ultimately realizing maximum production of fumarate.

Conclusions

In this study, the noncyclic glyoxylate pathway was successfully constructed for fumarate synthesis. The transmission efficiency of intermediate metabolites was enhanced by optimizing the expression levels of pathway enzymes. Further, the transmission efficiency of targeted metabolites was improved by strengthening the C4-dicarboxylate transporters. Based on these strategies, fumarate production with strain E. coli W3110△4-P(H)CAI(H)SC was increased from 3.2 to 22.4 g/L. These strategies have great application potential in developing efficient microbial cell factories for production of high-value added chemicals.

Materials and methods

Strains and plasmids

Escherichia coli W3110△ldhApoxBpflBpta-ackAfrdBCfumBfumAC (E. coli W3110△4) was applied as host strain for overexpressing key genes [24]. The engineered E. coli strains for fumarate production were all derived from E. coli W3110△4. E. coli JM109 and plasmid pETM6R1 [25] were used for constructing key plasmids. All strains and plasmids are listed in Additional file 1: Table S1.

DNA manipulation

Gibson Assembly was applied for constructing key plasmids according to the protocol of Gibson Assembly Cloning Kit (NEB), respectively. Pyruvate carboxylase gene from Aspergillus flavus (AfPYC, AFLA_112120) was amplified by PCR using plasmids pTrcHisA-AfPYC as template [7]. Citrate synthase (EcCS, b0720), aconitase (EcACN, b0118) and isocitrate lyase (EcICL, b4015) genes from E. coli were amplified from plasmids pET28a-EcCS, pET28a-EcACN, and pET28a-EcICL, respectively [7]. Succinate dehydrogenase (SDH, b0723) [22], the C4-dicarboxylate transporters dcuC (b0621) and dcuB (b4123) genes were PCR-amplified from the genome of E. coli W3110 [26].

Medium

LB medium used for seed culture: 5 g/L yeast extract, 10 g/L peptone, 5 g/L NaCl. Ampicillin (100 mg/mL) was added to LB medium appropriately when needed.

Modified M9 minimal medium used for fermentation: 50 g/L glucose, 10 g/L yeast extract, 0.5 g/L NH4Cl, 1 g/L citrate, 3 g/L NaHCO3, 7.52 g/L Na2HPO4-2H2O, 3 g/L KH2PO4, 0.5 g/L NaCl, 0.246 g/L MgSO4, 0.044 g/L CaCl2, 1 μg/L biotin, 1 μg/L thiamin, and 1 mL trace element solution (2.4 g/L FeCl3-6H2O, 0.3 g/L CoCl2-6H2O, 0.3 g/L CuCl2, 0.3 g/L ZnCl2-4H2O, 0.3 g/L NaMnO4, 0.075 g/L H3BO3, 0.5 g/L MnCl2-4H2O, dissolve in 0.12 M HCl). Ampicillin (100 mg/mL) and IPTG (0.4 mmol/L) were added appropriately when needed.

Culture conditions

The seed culture was cultivated at 37 °C for 12 h with rotation at 200 rpm in a 250-mL flask containing 25 mL LB medium. After that, the broth was centrifuged to discard supernatant liquid, and then fresh M9 medium was used to suspend the pellet. Next, the cell suspension was spread equally across 500-mL flasks with 50 mL fresh M9 medium with an initial biomass OD600 = 0.5. This cell culture was buffered by 30 g/L CaCO3, and fermented at 37 °C for 60 h with rotation at 200 rpm. 50 g/L glucose was fed at 24 h.

Fermentation was conducted in a 5-L fed-batch bioreactor containing 2.5 L M9 medium with an initial biomass OD600 = 0.5 at 37 °C for 60 h. Agitation speed and aeration rate were controlled at 200 rpm and 1.0 vvm, respectively. Culture pH was controlled at 7.0 using 20% (w/v) Na2CO3. 50 g/L glucose was fed at 24 h.

Analytical methods

The optical density at 600 nm (OD600) was assayed by a spectrophotometer (1OD600 = 0.33 g/L DCW (Dry Cell Weight)). Glucose concentration was quantified by a biosensor SBA-90 [24]. The concentration of organic acids was detected by high-performance liquid chromatography (HPLC) [24].

Intracellular metabolites were extracted by freezing-thawing in methanol [33]. The intracellular fumarate, succinate, and oxaloacetate were determined by HPLC according to the procedure described in previous reports [24].

Transcriptional analysis

Total RNA was extracted by the RNAprep pure Kit (TIANGEN), and reverse transcription was conducted for cDNA synthesis as described in the protocol of Reverse Transcription Kit (Takara). Real-time quantitative PCR was carried out according to [34]. L-Idonate/5-ketogluconate/gluconate transporter gene (idnT) was used as reference gene.

Enzyme activity assays

Pyruvate carboxylase (PYC) was assayed as reported by [35]. Citrate synthase (CS) was analyzed as described by [36]. Aconitase (ACN) was detected according to [37]. Isocitrate lyase (ICL) was determined as previously described methods [7]. Succinate dehydrogenase (SDH) was measured by the method of [38].