Abstract
Background
There is a dire need for the discovery and development of new antimicrobial agents after several experiments for a better resistance of microorganisms towards antimicrobial agents become a serious health problem for a few years in the past. As benzimidazole possess various types of biological activities, it has been synthesized, in the present study, a new series of (5-(3-(1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone analogs by using the condensation and screened for its in vitro antimicrobial activity and cytotoxicity.
Results
The synthesized (5-(3-(1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl) benzofuran-2-yl)(phenyl)methanone analogs were confirmed by IR, 1H and 13C-NMR, MS spectra and HRMS spectral data. The synthesized compounds were evaluated for their in vitro antimicrobial potential against Gram-positive (Bacillus subtilis, Bacillus megaterium, Staph aureus and Streptococcus pyogenes), Gram-negative (Escherichia coli, Proteus vulgaris, Proteus mirabilis and Enterobacter aerogenes) bacterial and fungal (Aspergillus niger, Candida albicans, Fusarium oxysporum, Fusarium solani) strains by disc diffusion method and the minimum inhibitory concentration (MIC) in which it has been recorded in microgram per milliliter in comparison to the reference drugs, ciprofloxacin (antibacterial) and nystatin (antifungal). Further, the cytotoxicity (IC50 value) has also been assessed on human cervical (HeLa), Supt1 cancer cell lines by using MTT assay.
Conclusions
The following screened compounds (4d), (4f), (4g), (4k), (4l), (4o) and (4u) were found to be the best active against all the tested bacterial and fungal strains among all the demonstrated compounds of biological study. The MIC determination was also carried out against bacteria and fungi, the compounds (4f) and (4u) are found to be exhibited excellent potent against bacteria and fungi respectively. The compounds (4f) and (4u) were shown non-toxic in nature after screened for cytotoxicity against the cancer cell lines of human cervical (HeLa) and Supt1. Additionally, structure and antibacterial activity relationship were also further supported by in silico molecular docking studies of the active compounds against DNA topoisomerase.
![](http://media.springernature.com/lw685/springer-static/image/art%3A10.1186%2Fs13065-017-0364-3/MediaObjects/13065_2017_364_Figa_HTML.gif)
Similar content being viewed by others
Background
The innovation and the growth of new antimicrobial and anticancer inhibitory agents are the fundamental goals in medicinal chemistry. According to WHO, number of people affected by cancer will rise from 14 million in 2012 to 22 million within the next 20 years [1]. Most of the cancer cells are defined by unrestrained growth of the cells without differentiation due to the deregulation of essential enzymes and other proteins controlling cell division and proliferation [2, 3]. Clinically, many chemotherapeutic drugs provide a satisfactory response, but they origin a variety of side effects to the patients despite curing the main problem, when they are first exposed to the tumors. Cancer cells have become invulnerable; therefore, there is an urgent need for potential, selective anticancer drugs in contemporary oncology [4]. On the other hand, typhoid, cholera and pneumonia are common worldwide bacterial diseases caused by Gram-negative bacteria. When comparing Gram-positive and Gram-negative bacteria, several species of Gram-negative bacteria are pathogenic. This potential is usually associated with confident components of the walls of Gram-negative cell while exacting the lipopolysaccharide layer [5].
Benzimidazole is a privileged pharmacophore encountered in a number of fundamental cellular components and bioactive molecules. Indeed, a number of important drugs used in different therapeutic areas contain a benzimidazole moiety [6]. Examples are proton pump inhibitor omeprazole, anti-hypertensive drugs candesartan and telmisartan, anthelmintics albendazole and mebendazole, as well as several other kinds of investigational therapeutic agents including antitumor and anticancer. The substituted benzimidazoles have received considerable interest during preceding two decades as they are endowed with a variety of biological activities and have wide range of therapeutic properties [7]. Benzimidazoles are one of the most proficient heterocyclic moieties, which have active sites in treating various diseases [8]. Frequent reports were published on benzimidazole fragment and its analogues competent to exhibit anticancer as well as antimicrobial activities [9, 10]. The basic moiety of telmisartan (reported as cytotoxicity agent in prostate cancer cell line) is also bis-benzimidazole scaffold. [11]. Literature survey revealed that of the compounds attitude benzimidazole moites reported to possess a number of attractive biological activities such as anti tubercular, anticancer, antihelmintic, anti allergic [12], antihistaminic [13], antifungal [14,15,16] and anti-inflammatory [17]. Recently, Thomas et al. reported that some novel 2-phenyl benzimidazole were shown cell based assays for cytotoxicity and antiviral activity against the panel of RNA and DNA virus molecules which have been found to be more potent [18]. Benzimidazole related molecules are exhibited to antimicrobial agents in search of the new chemical entities, as there is another approach in which the combination of two or more heterocyclic pharmacophore in the single entity results in more potent activity with different modes of action [19, 20].
In this present study some novel benzofuran bearing benzimidazole derivatives have been synthesized and their antimicrobial and cytotoxic activities have been established. It was considered worthwhile that to synthesize convinced new chemical entities include two active pharmacophore such as benzimidazoles and benzofuran nucleus single molecular frame work and to get them evaluated for their antimicrobial activity. To the preeminent of our knowledge, this is the best report on the synthesis of benzimidazoles derivatives bearing benzofuran ring. Among the several chemical classes that boast the potential to display the antimicrobial activity [21], cancer activity [22] structures of few benzimidazole possessing significant in vitro antimicrobial (A, B) and cytotoxicity activity (C, D) are presented in Fig. 1.
Results and discussion
Chemistry
For the synthesis of target compounds, 5,5′-methylenebis(2-hydroxybenzaldehyde) (2) [23] was prepared in good yield by electrophilic substitution reaction of salicylaldehyde (1) with 1,3,5-trioxane(formaldehyde trimer) in glacial acetic acid in the presence of a catalytic amount of concentrated sulfuric acid. Aldehyde (2) was subjected to condense cyclisation with substituted phenacyl bromide in the presence of potassium carbonate at the room temperature to obtain the corresponding 5-[(2-benzoylbenzofuran-5-yl)methyl]-2-hydroxybenzaldehyde (3a) [24, 25] (Scheme 1). The structures of compound (3a) were confirmed by their spectroscopic data (1H NMR, 13C NMR, IR, MS, and HRMS) which were provided in the experimental part. The 1H NMR spectrum of compound (3a) showed two singlet signals at 9.85 and 10.98 ppm corresponding to aldehyde and hydroxyl groups, respectively. A singlet signal was suitable to the bridged methylene protons at δ 3.98 ppm, in addition to down field singlet signal due to benzofuran proton and aromatic protons in the region 8.03–6.95 ppm. The conformation regards the structure of the compound (3a) is executed by the 13C NMR data varying between δ 191.3 and δ 42.09 ppm. The carbon atoms of the two carbonyl groups present at aldehyde and keto appeared more downfield at 191.3 and 182.1 ppm. The two carbon of the –C–O–C– linkage in benzofuran nucleus exhibited the absorption peaks at δ 159.2 and δ 151.4 ppm, respectively. The carbon atoms aromatic ring was observed to exhibit between absorption peaks at δ 154.0–112.1 ppm. The presence of the bridged methylene group between the two aromatic rings was observed to exhibit an absorption peak at δ 42.0 ppm. The IR spectra of the products showed the absorption bands of C=Cstr, HC=Ostr and –OHstr in the region 1650, 1710 and 3550 cm−1 respectively. Further confirmation of HRMS spectra showed the obtained peak at m/z = 357.11204 ([M+H]+); resultant to a molecular formula C23H17O4.
The synthesis of various compounds (4a–u) were carried out by condensation of the 5-((2-benzoylbenzofuran-5-yl)methyl)-2-hydroxybenzaldehyde (3a) with various substituted ortho phenylenediamine in the presence of glacial acetic acid under conventional reflux temperature in good yield (Scheme 1). The structures of all the synthesized compounds (4a–u) were thoroughly analyzed by using 1H-NMR, 13C-NMR, IR, ESI–MS and HRMS analytical techniques. The assigned structures of compound (4a) are based on the detailed spectroscopic analysis. The 1H NMR spectrum of compound (4a) showed singlets of the hydroxyl proton at δ 12.23 and signal of –NH of imidazole ring appeared as singlet at δ 13.18, which was further corroborated through a sharp band at 3420 cm−1 in its IR spectrum. 13C NMR spectrum of compound (4a) showed resonance at δ 182.3 ppm attributed to carbonyl group of benzofuran ring, which was further confirmed by IR spectrum through band at 1740 cm−1. The mass spectrum of compound (4a) showed peak at m/z 445.08 (M+H)+. Further confirmation HRMS spectra showed peak obtained at m/z = found 445.180745 ([M+H]+); consequent to a molecular formula C29H21N2O3.
In the proton NMR spectrum of (5-(3-(5-fluoro-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone (4f), the signals at δ 13.21 and 12.52 ppm value can be assigned to NH of benzimidazole and OH proton of phenolic moiety, respectively. They multiple at δ 8.02–6.89 ppm in the proton NMR spectrum of compound (4f) accounts for three aromatic protons of benzimidazole and phenyl moiety out of the twelve protons. The methylene protons singlet peak assigned at δ 4.01 ppm. In the 13C NMR spectrum of compound (4f), the chemical signal δ 182.1 and 159.1 ppm were assigned to the carbonyl and hydroxyl aromatic ring respectively. The chemical signals at δ 42.1 were attributed to the bridged methylene carbon. The mass spectrum characterization of the compound (4f) exhibits an ion peak at 463.1 m/z which can be designated as the M+1 ion peak and HRMS spectra showed the obtained peak at m/z = 463.14142 ([M+H]+), corresponding to a molecular formula C29H20FN2O3.
The IR spectrum characterization of compound (5-(3-(5,6-dimethyl-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl) methanone (4g) indicated by a shift of absorption band from 3413 cm−1, corresponding to the NH group stretching. This can be correlated to the ring stretching of benzimidazole moiety. In the proton NMR spectrum of compound (4g), the NH proton has resonated as a singlet at δ 12.95 ppm, OH proton showed as a singlet at δ 9.81 and the multiplet at δ 8.01–6.95 ppm value can be attributed to the aromatic protons of compound (4g). The singlet at δ 4.10 and 2.31 ppm was assigned to the bridged methylene protons and two methyl protons respectively. In the 13C NMR spectrum of compound (4g), the chemical signal δ 183.0 and 151.5 ppm were assigned to the carbonyl and hydroxyl attached carbon respectively. The chemical signals at δ 156.4–112.1 ppm were attributed to the aromatic ring carbons and chemical signals at δ 45.2 and 21.0 ppm bridged methylene protons and two methyl protons respectively. The mass spectrum characterization of the compound (4g) exhibits an ion peak at 473.2 m/z which can be designated as the M+1 ion peak and HRMS spectra showed the obtained peak at m/z = 473.18597 ([M+H]+) and corresponding to a molecular formula C31H25N2O3.
In the proton NMR spectrum of (5-(3-(5-bromo-3H-imidazo[4,5-b]pyridin-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(4-chlorophenyl)methanone (4u), the singlet at δ 13.29 and 12.35 ppm was assigned to the NH of the imidazo pyridine and hydroxyl group proton of the phenolic moiety. The thirteen aromatic protons of the compound (4u) have resonated at δ 8.20–7.05 ppm as multiplet. The mass spectrum characterization of the compound (4u) exhibits an ion peak at 558.9 m/z which can be designated as the M+1 ion peak and HRMS spectra showed the obtained peak at m/z = 557.02621 ([M+H]+) consequent to a molecular formula C29H19O3N2BrCl.
In vitro antibacterial activity
The in vitro antibacterial studies of various compounds (4a–u) were assayed with concentrations (900 μg/mL) against Gram-positive and Gram-negative bacteria by disc diffusion assay [26]. The Gram-positive strains used were Bacillus subtilis, Bacillus megaterium, Staph aureus, Streptococcus pyogenes and Gram-negative bacteria were Escherichia coli, Proteus vulgaris, Proteus mirabilis and Enterobacter aerogenes. The results were recorded for each weathered compound diameter of inhibition zones of microbial growth around the disks (in mm). The values of zone of inhibition for bacterial are revealed in Table 1. The minimum inhibitory concentration (MIC, μg/mL) is the lowest concentration of a chemical that prevents visible growth of bacterium in microgram per milliliter of active compounds (Table 1) was determined by the microorganism’s susceptibility tests in nutrient and potato dextrose broths were used for the determination of MIC [27]. The results revealed that seven organic compounds displayed better inhibitory effects on the growth of the tested bacterial strains. It was interesting to note that the compounds with substituent on the 3rd position of imidazole ring displayed outstanding antibacterial activity and almost equal to that of standard. However, these trends were transformed closely to antifungal activity.
Almost all the synthesized compounds (4a–u) were found to be active against all investigated pathogenic bacterial strains. As shown in Table 1, it is cleared that the compounds (4d), (4f), (4g), (4k), (4l), (4o) and (4u) have superior significant antibacterial potency to the reference drug. In case of Staphylococcus aureus, B. megaterium, E. coli, E. aerogens, P. mirabilis, compounds (4d) and (4f) exhibits the highest antibacterial potential with MIC 25–75 μg/mL, it may be attributed that the presence of more electronegative fluoro and dichloro substituent on phenyl ring. The compound (4u) displayed significant inhibitory potential with MIC 25 μg/mL against P. mirabilis, P. vulgarise and threshold activity against B. megaterium, and E. coli with MIC 120–175 μg/mL, it may have a basic moiety of the bromo pyridine group. In case of E. aerogens compounds with methyl (4c), dichloro (4d) and nitro (4e) displayed moderate to be good antibacterial activity with MIC 25 μg/mL. However, the compounds of (4a), (4k); (4c), (4m); (4e), (4o) and (4g), (4r) were not showed any activity against S. aureus, streptococcus pyogenes, and B. subtilis, respectively; it may be rational owing to the presence of low polar substituents.
Antifungal activity
The compounds (4d), (4f), (4g), (4k), (4l), (4o) and (4u) were tested against four reference fungal strains such as Aspergillus niger, Candida albicans, Fusarium oxysporum, Fusarium solani by disc diffusion method. Minimum inhibitory concentration (MIC) in microgram per milliliter of compounds exhibiting activity (Table 2) was determined by the microorganism’s susceptibility tests in nutrient and potato dextrose broths were used for the determination of MIC. The evaluated seven compounds were found to exert a prominent antifungal activity against pathogenic fungal strains. The compounds (4l) and (4u) exhibited a significant inhibitory activity against A. niger and F. oxysporum with MIC 25–50 μg/mL, whereas, the compounds with floro (4f) and dichloro (4d) also exhibited maximum activity with MIC > 25. In case of all fungal strains, compound (4o) revealed moderate to good activity with MIC 25–100 μg/mL. The compounds (4g) and (4k) exhibit less potent inhibitory potential against A. niger with an absence of MIC and all the results are given in Table 2. From the obtained in vitro antimicrobial results, it was observed that substitution of electron withdrawing groups at 3rd position of benzimidazole ring leads to increase in both antifungal and antibacterial activity.
In vitro cytotoxicity
MTT assays determine the ability of viable cells to convert a soluble yellow tetrazolium salt (MTT: 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide) into insoluble purple formazan crystals by the mitochondrial dehydrogenase enzymes. Cells were exposed to 0.5 mg/mL of MTT for 3 h at 37 °C in an appropriate complete medium. The medium and the MTT were removed after solubilisation in dimethyl sulfoxide (DMSO) and the amount of insoluble formazan crystals was evaluated by measuring the optical density at 550 nm. Each condition was performed in triplicate. Each measurement was corrected from the optical density of MTT alone and expressed relative to the non-treated conditions. Determination of the inhibiting concentration of 50% cell viability and IC50 was performed. In short, the fraction of cell affected (Fa) and the fraction of cell unaffected (Fu) relative to one were determined from the viability assay. The log of (Fa/Fu) was plotted against the log of concentration for each compound. Log of IC50 was determined at the y-intercept. Standard error was evaluated through the 95% confidence interval.
The appreciable results were obtained from the previous biological studies, specifically, anti-microbial activity for the derivatives of more microbial active compounds, which encouraged in the present research work to test their cytotoxicity against a human cancer cells (HeLa), Supt1 cell lines. In all the above cases, the activity of the compound (4f) and (4u) was found to be significantly similar than the controller of the DMSO solvent. To determine the relative cytotoxicity of compounds in the Hela, Supt1 cells were incubated with increasing concentrations (10, 25, 50, 75, 100, 250, 500 and 1000 ng) of the drugs and the survival of the cell was estimated by MTT assay and their IC50 were shown in Figs. 2 and 3, respectively. Both the compounds were found non-toxic at very low concentrations (10, 25, 50 and 75 ng), however, the concentration of drugs in about 500 ng was extremely cytotoxic (> 80%). The IC50 values at 299.009 and 505.618 ng concentrations in Hela cell lines were shown by the compounds (4f) and (4u) respectively. The IC50 value of compound (4f) is 278.73 ng and (4u) is 499.903 ng in Supt1 cells. Although the anticancer activity of (4f) and (4u) is not comparable as standard drug activity, the functional group modifications at the substituted benzimidazole and pyrido imidazole can guide to upgrade the drug leads for further investigations from this laboratory.
Formula for the cell viability of MTT assay
Molecular docking
The crystal structure of DNA type IIA topoisomerase (pdb id: 2XCT) [28] was retrieved from the Protein Data Bank to understand the interaction between new series of benzimidazole derivatives and type II topoisomerase. The devised software, GLIDE 5.6 [29] was used for molecular docking studies. Protein was prepared by applying default parameters of wizard Maestro 9.0; a grid was generated around the active site by selecting the co-crystalized ligand. Receptor van der Waals scaling for non-polar atoms was kept at 0.9 [30]. The molecules were built by using Maestro build panel and prepared by the application of Lig Prep. Low energy confirmation of the ligands were selected and docked into the grid generated for the protein using the docking mode of extra precision (XP) [31]. Dock pose of each ligand was analyzed for interactions with the receptor. The best and similar interactions with the protein active site were shown from those active molecules, (4d), (4f) and (4g). The molecules were deeply embedded into the hydrophobic active site pocket and they were occupied the similar position as represented in Fig. 4. The docking pose and ligand interaction diagrams of (4d), (4f) and (4g) (pulm in color, green in color and orange in color) are shown in Fig. 5.
To get more insights into the structural basis for its activity, all synthesized compounds were docked into DNA type IIA topoisomerase (2XCT) and the most active compounds (4d), (4f) and (4g) were analyzed in more detail. Docking studies of these compounds showed similar interactions (hydrogen bonds with DC 12 G; DT 10 H, π–π stacking interactions with DG F 8, DG H 9, π–cation interactions with Arg D 458 and metal co-ordination bond with Mn) with the target.
Docking analysis of the best active compounds in the active site of 2XCT revealed that the hydrogen bond, π–π stacking, π–cation and metal co-ordination interactions are important for the activity of these compounds. The obtained result from docking study was well in agreement with experimental results: compound (4d) (pulm in color, Fig. 5a) showed only one hydrogen bond with DC G 12 (bond length of 1.893 Å), one π–cation interaction with ARG D 458, two π–π stacking interactions with DG F 8, DG H 9 and metal co-ordination interaction with Mn; whereas compound (4f) (green in colour, Fig. 5b) showed two hydrogen bond interactions with DC G 12 (bond length of 1.863 Å), DT H 10 (bond length of 1.916 Å), one π–cation interaction with ARG D 458, three π–π stacking interactions with DG F 8, DG H 9 and metal co-ordination interaction with Mn; compound (4g) (orange in color, Fig. 5c) showed two hydrogen bond interactions with DC G 12 (bond length of 1.944 Å), DT H 10 (bond length of 1.905 Å), one π–cation interaction with ARG D 458, two π–π stacking interactions with DG H 9, ARG B 1122 and metal co-ordination interaction with Mn.
From the above results, compound 4d with one hydrogen bond showed less activity, whereas compounds 4f, 4g with two hydrogen bonds showed more activity. These docking results clearly coincided with that of experimental antibacterial activity. Hence, more number of hydrogen bonding interactions with target type II topoisomerase, will affects on more activity. Docking score, glide energy and emodel energies are tabulated in Table 3. Predicted ADME (drug-likeness) properties of all synthesized compounds are provided in Additional file 1.
Experimental
Chemistry
Melting points are uncorrected and were find out in open capillary tubes in sulphuric acid bath. TLC was carrying out on silica gel-G, and spotting was done using UV light. IR spectra were recorded using Perkin-Elmer 1000 instrument in KBr phase, The 1H NMR spectra were record on a Varian as 400 MHz instrument in DMSO, chemical shifts are given in δ ppm relative to TMS, and coupling constants (J) are expressed in hertz (Hz). Combinations of the following abbreviations are used to describe NMR spectra: s-singlet; d-doublet; t-triplet; m-multiplet. 13C NMR spectra were recorded with a Bruker Advance 400 (100 MHz) spectrometer. Mass spectra on Agilent LC–MS instrument giving only (M++H) values.
5-((2-Benzoylbenzofuran-5-yl)methyl)-2-hydroxybenzaldehyde (3a)
The mixture of 3g compound 2 (0.015 mmol), 1.51 g phenacyl bromide (0.007 mmol), and 3.10 g K2CO3 (0.022 mmol, 1.5 eq) was stirred in acetone (15 cm3) at room temperature for 12 h [24]. The completion of the reaction was monitored by TLC; the product was washed with water (15–25 cm3) and extracted from ethyl acetate. The pure compound 3 was separated through column chromatography using petroleum ether/ethyl acetate (70:30, v/v) as white solid (2.7 g, 90%). m.p.: 120–125 °C; 1H NMR (400 MHz, CDCl3): δ = 10.95 (s, 1H, Ar–CHO), 9.85 (s, 1H, OH), 8.03 (d, 2H, J = 7.93 Hz, Ar–H), 7.66–7.46 (m, 4H, Ar–H), 7.40–7.30 (m, 5H, Ar–H), 6.95 (d, 2H, J = 8.39 Hz, Ar–H), 3.98 (s, 2H, –CH2–) ppm; 13C NMR (100 MHz, CDCl3): δ = 191.3, 182.1, 159.2, 154.0, 151.4, 137.9, 137.3, 136.8, 135.3, 132.3, 132.1, 130.9, 129.8 (2C), 128.7 (2C), 126.9, 123.0, 122.0, 117.4, 117.1, 112.1, 42.0 ppm; IR (KBr): \(\bar{\nu }\) = 3550, 2800, 1650, 1579, 1720 cm−1; MS (ESI+): m/z = 357.1 ([M+H]+); and HRMS m/z calcd for C23H17O4 ([M+H]+) 357.11214, found 357.11204.
5-((2-(4-Chlorobenzoyl)benzofuran-5-yl)methyl)-2-hydroxybenzaldehyde (3b)
A mixture of 3g compound 2 (0.012 mmol, 1 eq), 1.386 g phenacyl bromide (0.06 mol, 0.5 eq), and 2.48 g K2CO3 (0.018 mol, 1.5 eq) was stirred in acetone (15 cm3) at a room temperature for 24 h. After completion of the reaction as indicated by TLC, the reaction mixture was filtered and washed with acetone (3–15 cm3). The filtrate was concentrated and the residue was chromatographer on silica gel (petroleum ether:ethyl acetate 70:30, v/v) to afford the compounds (3b) as white solid (2.46 g, 82%). m.p.: 128–130 °C; 1H NMR (400 MHz, CDCl3): δ = 10.95 (s, 1H, Ar–CHO), 9.85 (s, 1H, Ar–OH), 8.05 (d, 2H, J = 7.93 Hz, Ar–H), 7.66–7.25 (m, 6H, Ar–H), 6.90 (d, 2H, J = 8.39 Hz, Ar–H), 3.97 (s, 2H, –CH2–) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 191.2 (CHO), 182.1 (CO), 159.9 (C–OH), 154.3, 138.4, 137.5 (3C), 136.8, 134.4, 132.3, 131.1 (2C), 129.8, 128.2 (2C), 127.4, 123.5, 117.6, 112.4, 41.7 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3550, 2850, 1650, 1729 cm−1; MS (ESI+): m/z = 391.09 ([M+H]+), 413.0; and HRMS m/z calcd for C23H16ClO4 ([M+H]+) 391.07341, found 391.07316.
General procedure of the synthesized benzimidazole derivatives (4a–u)
o-Phenylenediamine, 0.068 g (0.632 mmol), was slowly added to a solution of 0.150 g (0.421 mmol) of 5-((2-benzoylbenzofuran-5-yl)methyl)-2-hydroxybenzaldehyde (3a) in glacial acetic acid, and the mixture was refluxed (70 °C) for 4–6 h under N2 atmosphere, the progress of the reaction being monitored by TLC. The mixture was cooled to room temperature, then, the mixture was poured into ice cold water and neutralised with sodium bicarbonate solution, after the mixture was washed with water and DCM for two times, the DCM layer was separated and dried over anhydrous sodium sulphate. Fatherly DCM solvent was removed in vacuo, the residue was purified by column chromatography on silica gel to give the corresponding products 4a. The other compounds 4b–u was also prepared by the similar procedure.
(5-(3-(1H-Benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone (4a)
From 0.150 g compound 3a (0.421 mmol, 1 eq), and 0.068 g and amine (0.632 mmol, 1.5 eq), the compound 4a was obtained as white solid (0.13 g, 87%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (80:20, v/v). m.p.: 236–240 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.18 (s, 1H, NH), 12.53 (s, 1H, Ar–OH), 8.0 (t, 2H, J = 7.28 Hz, Ar–H), 7.77–7.45 (m, 8H, Ar–H), 7.33–7.21 (m, 5H, Ar–H), 7.00 (t, 2H, J = 8.53 Hz), 4.05 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.3 (C=O), 158.3, 155.8, 153.4 (N–C–N), 151.6 (C–OH), 141.2 (2C), 138.6, 137.9, 135.3, 132.5, 131.0, 129.8 (2C) 129.5, 128.7 (2C), 123.9, 122.9 (2C), 119.0, 117.2, 118.6, 117.3, 117.2, 112.2 (2C), 41.9 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3580, 3420, 1740, 1665, 1597 cm−1; MS (ESI+): m/z = 445.08 ([M+H]+); and HRMS: m/z calcd for C29H21N2O3 ([M+H]+) 445.180721, found 445.180745.
(5-(3-(5-Bromo-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone (4b)
From 0.200 g compound 3a (0.561 mmol, 1 eq), and 0.157 g amine (0.842 mmol, 1.5 eq), the compound 4b was obtained as brown solid (0.16 g, 83%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 235–238 °C; 1H NMR (400 MHz, DMSO-d6): δ = 12.96 (s, 1H, NH), 12.49 (s, 1H, Ar–OH), 8.02 (d, 2H, J = 7.17 Hz, Ar–H), 7.84 (s, 1H, Ar–H), 7.62–7.29 (m, 10H, Ar–H), 7.02 (d, 1H, J = 8.3 Hz, Ar–H), 4.12 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.3 (C=O), 156.5, 154.0, 152.9 (N–C–N), 151.3 (C–OH), 140.9, 140.3, 13.0, 137.7, 135.5, 132.6, 131.9 (2C), 130.7 (2C), 128.6 (2C), 126.9, 124.7, 119.8, 118.9, 115.6, 117.9 (2C), 116.5, 112.1, 42.6 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3480, 3415, 1740, 1659, 1584 cm−1; MS (ESI+): m/z = 423.14 ([M+H]+); and HRMS: m/z calcd for C29H20BrN2O3 ([M+H]+) 423.13940, found 423.13905.
(5-(4-Hydroxy-3-(5-methyl-1H-benzo[d]imidazol-2-yl)benzyl)benzofuran-2-yl)(phenyl)methanone (4c)
From 0.180 g compound 3a (0.505 mmol, 1 eq), and 0.093 g amine (0.758 mmol, 1.5 eq), the compound 4c was obtained as brick red solid (0.14 g, 82%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 240–245 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.07 (s, 1H, NH), 11.76 (s, 1H, OH), 7.99 (d, 2H, J = 6.7 Hz, Ar–H), 7.77 (s, 1H, Ar–H), 7.75–7.68 (m, 4H, Ar–H), 7.63–7.48 (m, 5H, Ar–H), 7.43 (s, 1H, Ar–H), 7.26 (t, 1H, J = 8.28 Hz, Ar–H), 7.10 (d, 2H, J = 8.5 Hz, Ar–H), 6.99 (s, 1H, Ar–H), 4.10 (s, 2H, CH2), 2.45 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.2 (C=O), 156.9, 154.2, 153.2 (N–C–N), 151.8 (C–OH), 141.6 (2C), 138.9, 137.9, 136.7, 132.8, 131.2, 129.8, 128.4 (2C), 126.0, 122.1, 121.6, 119.4, 118.6, 117.2, 117.3, 112.5 (2C), 112.1, 42.3 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3469, 3423, 1720, 1622, 1569 cm−1; MS (ESI+): m/z = 459.1 ([M+H]+), and HRMS: m/z calcd for C30H23N2O3 ([M+H]+) 459.11540, found 459.11505.
(5-(3-(5,6-Dichloro-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone (4d)
From 0.200 g compound 3a (0.561 mmol, 1 eq), and 0.148 g amine (0.842 mmol, 1.5 eq), the compound 4d was obtained as white solid (0.15 g, 75%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (80:20, v/v). m.p.: 2245–250 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.20 (s, 1H, NH), 12.21 (s, 1H, OH), 8.05–7.96 (m, 4H, Ar–H), 7.78–7.68 (m, 4H, Ar–H), 7.94–7.81 (t, 2H, J = 7.78 Hz, Ar–H), 7.76 (s, 1H, Ar–H), 7.30 (t, 2H, J = 6.02 Hz, Ar–H), 7.02 (d, 1H, J = 8.51, Ar–H) 4.04 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.3 (C=O), 157.9, 156.8, 153.0, 151.8 (C–OH), 140.0, 138.7, 134.6, 131.9, 131.7, 131.0, 130.9 (2C), 129.7 (3C), 128.6 (2C), 126.9 (2C), 12.9, 121.7, 117.3, 117.0 (2C), 116.9, 116.5, 112.1, 42.3 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3415, 1720, 1569 cm−1; MS (ESI+): m/z = 445.0 ([M+H]+), and HRMS: m/z calcd for C29H19Cl2N2O3 ([M+H]+) 445.09540, found 445.09515.
(5-(4-Hydroxy-3-(6-nitro-1H-benzo[d]imidazol-2-yl)benzyl)benzofuran-2-yl)(phenyl)methanone (4e)
From 0.200 g compound 3a (0.561 mmol, 1 eq), and 0.129 g amine (0.842 mmol, 1.5 eq), the compound 4e was obtained as yellow solid (0.16 g, 83%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 230–235 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.74 (s, 1H, NH), 11.81 (s, 1H, OH), 8.3 (d, 2H, J = 8.1 Hz, Ar–H), 7.99–7.76 (m, 4H, Ar–H), 7.72–7.69 (m, 5H, Ar–H), 7.65 (d, 3H, Ar–H) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.3 (C=O), 156.9, 155.8, 152.9 (N–C–N), 150.2 (C–OH), 147.9, 143.7 (C–NO2), 139.8, 138.2, 137.9, 134.6, 131.9, 130.0, 129.7 (3C), 128.5 (2C), 123.9, 119.8, 118.9, 118.4, 116.9, 116.2, 113.0, 112.0, 42.0 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3510, 3450, 1785, 1665, 1587 cm−1; MS (ESI+): m/z = 490.0 ([M+H]+), and HRMS: m/z calcd for C29H20N3O5 ([M+H]+) 490.10145, found 490.10175.
(5-(3-(5-Fluoro-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone (4f)
From 0.180 g compound 3a (0.505 mmol, 1 eq), and 0.092 g amine (0.758 mmol, 1.5 eq), the compound 4f was obtained as off white solid (0.15 g, 85%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 235–238 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.21 (s, 1H, NH), 12.52 (s, 1H, OH), 8.02 (d, 3H, J = 7.2 Hz, Ar–H), 7.80–7.41 (m, 8H, Ar–H), 7.42–6.89 (m, 4H, Ar–H), 4.01 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.1 (C=O), 159.1, 156.7, 154.1, 153.1, 151.4 (C–OH), 144.2, 137.9, 137.5, 136.7, 135.5, 132.4, 132.0, 131.9, 131.0, 129.8 (2C), 128.7 (2C), 128.3, 125.4 (2C), 119.7, 118.5, 117.4, 117.3, 117.1, 112.1, 109.9, 102.3, 42.1 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3453, 3405, 2550, 1735, 1655, 1587 cm−1; MS (ESI+): m/z = 463.1 ([M+H]+); and HRMS: m/z calcd for C29H20FN2O3 ([M+H]+) 463.14446, found 463.14142.
(5-(3-(5,6-Dimethyl-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone (4g)
From 0.250 g compound 3a (0.702 mmol, 1 eq), and 0.145 g amine (1.053 mmol, 1.5 eq), the compound 4g was obtained as brick red solid (0.187 g, 75%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 250–255 °C; 1H NMR (400 MHz, DMSO-d6): δ = 12.95 (s, 1H, NH), 9.81 (s, 1H, OH), 8.01–7.90 (m, 4H, Ar–H), 7.77–7.65 (m, 7H, Ar–H), 7.53–7.17 (m, 3H, Ar–H), 6.95 (s, 1H, Ar–H), 4.10 (s, 2H, CH2), 2.31 (s, 6H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.0 (C=O), 156.4, 154.0, 152.6 (N–C–N), 151.5 (C–OH), 142.8 (2C), 138.9, 137.7, 136.7, 132.1, 131.9, 129.1, 128.6 (2C), 126.1, 122.9, 122.5, 119.4, 118.6, 117.2, 117.0, 112.5 (2C), 112.1, 45.2, 21.0 (2C) ppm; IR (KBr): \(\bar{\nu }\) = 3480, 3413, 2550, 1724, 1645, 1567 cm−1; MS (ESI+): m/z = 473.2 ([M+H]+); and HRMS: m/z calcd for C31H25N2O3 ([M+H]+) 473.18430, found 473.18597.
(5-(3-(5-Chloro-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone (4h)
From 0.200 g compound 3a (0.561 mmol, 1 eq), and 0.199 g amine (0.842 mmol, 1.5 eq), the compound 4h was obtained as off white color solid (154 g, 78%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 235–240 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.12 (s, 1H, NH), 11.59 (s, 1H, OH), 8.02 (d, 2H, J = 7.5 Hz, Ar–H), 7.66–7.15, (m, 11H, Ar–H), 6.91 (d, 2H, J = 7.25 Hz, Ar–H), 3.94 (s, 2H, –CH2–) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.0 (C=O), 156.5, 155.1, 152.9, 150.1 (C–OH), 140.2, 138.9, 137.7, 132.9, 132.6, 131.9, 131.0, 129.2, 129.7 (2C), 127.6 (2C), 124.9, 119.2, 118.1, 115.3 (2C), 112.1, 107.9, 101.8, 42.3 ppm; IR (KBr): \(\bar{\nu }\) = 3458, 3430, 2570, 1775, 1655, 1597 cm−1; MS (ESI+): m/z = 509.21 ([M+H]+); and HRMS: m/z calcd for C29H20ClN2O3 ([M+H]+) 509.19560, found 509.19515.
(5-(3-(1H-Benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(4-chlorophenyl)methanone (4i)
From 0.200 g compound 3b (0.512 mmol, 1 eq), and 0.083 g amine (0.769 mmol, 1.5 eq), the compound 4i was obtained as white solid (0.168 g, 84%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 240–242 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.32 (s, 1H, NH), 12.02 (s, 1H, OH), 8.0 (t, 2H, J = 7.28 Hz, Ar–H), 7.79 (s, 1H, Ar–H), 7.77–7.45 (m, 8H, Ar–H), 7.33–7.21 (s, 1H, Ar–H), 7.00 (t, 2H, J = 8.53 Hz, Ar–H), 4.05 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.9 (C=O), 56.8, 154.5, 152.1, 151.9 (C–OH), 141.7 (2C), 138.0, 137.2, 135.7, 133.4, 132.6, 131.4 (3C), 129.6, 129.1 (2C), 127.5, 126.6 (2C), 123.4, 117.7, 117.5 (2C), 113.0 (2C), 112.6, 43.8 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3580, 3423, 2570, 1740, 1565, 1597 cm−1; MS (ESI+): m/z = 478.09 ([M+H]+); and HRMS: m/z calcd for C29H20ClN2O3 ([M+H]+) 478.10960, found 478.10944.
(5-(3-(6-Bromo-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(4-chlorophenyl)methanone (4j)
From 0.150 g compound 3b (0.384 mmol, 1 eq), and 0.106 g amine (0.576 mmol, 1.5 eq), the compound 4j was obtained as white solid (0.124 g, 83%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (70:30, v/v). m.p.: 235–240 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.00 (s, 1H, NH), 12.75 (s, 1H, OH), 8.02 (d, 2H, J = 7.17 Hz, Ar–H), 7.66 (s, 1H, Ar–H), 7.62–7.35 (m, 9H, Ar–H), 6.92 (d, 1H, J = 8.8 Hz, Ar–H), 4.13 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.2 (C=O), 156.7, 155.1, 153.9 (N–C–N), 150.8 (C–OH), 139.9 (2C), 138.0, 137.9 (2C), 134.6, 132.7, 131.0 (3C), 129.7 (2C), 126.0, 121.2, 119.9, 116.9 (2C), 116.8, 112.5, 109.6, 102.9, 42.3 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3580, 3425, 2570, 1740, 1560, 1585 cm−1; MS (ESI+): m/z = 557.0 ([M+H]+); and HRMS: m/z calcd for C29H19BrClN2O3 ([M+H]+) 557.01960, found 557.01944.
(4-Chlorophenyl)(5-(4-hydroxy-3-(6-methyl-1H-benzo[d]imidazol-2-yl)benzyl)benzofuran-2-yl)methanone (4k)
From 0.180 g compound 3b (0.461 mmol, 1 eq), and 0.084 g amine (0.692 mmol, 1.5 eq), the compound 4k was obtained as brown solid (0.153 g, 85%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (80:20, v/v). m.p.: 250–255 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.04 (s, 1H, NH), 11.55 (s, 1H, OH), 8.01 (d, 2H, J = 6.7 Hz, Ar–H), 7.79 (s, 1H, Ar–H), 7.74–7.49 (m, 7H, Ar–H), 7.38 (s, 1H, Ar–H), 7.26 (d, 1H, J = 8.03 Hz, Ar–H), 7.09 (t, 1H, J = 4.08 Hz, Ar–H), 6.97 (s, 1H, Ar–H), 4.10 (s, 2H, CH2), 2.45 (s, 3H, CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.9 (C=O), 156.8, 152.1, 152.0, 151.6 (C–OH), 138.0, 137.2, 136.4, 135.8, 133.4, 132.6, 132.4, 131.4 (3C), 130.2 (2C), 129.6, 126.7, 123.4, 117.7, 117.5, 116.9, 113.0, 112.6, 43.6 (–CH2–), 21.5 (–CH3) ppm; IR (KBr): \(\bar{\nu }\) = 3395, 2700, 1720, 1622, 1570 cm−1; MS (ESI+): m/z = 493.10 ([M+H]+); and HRMS: m/z calcd for C30H23ClN2O3 ([M+H]+) 493.10960, found 493.10904.
(4-Chlorophenyl)(5-(3-(5,6-dichloro-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl) benzo furan-2-yl)methanone (4l)
From 0.200 g compound 3b (0.512 mmol, 1 eq), and 0.134 g amine (0.769 mmol, 1.5 eq), the compound 41 was obtained as brick red solid (0.17 g, 85%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (70:30, v/v). m.p.: 250–255 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.20 (s, 1H, NH), 12.00 (s, 1H, OH), 8.05 (d, 3H, J = 8.2 Hz, Ar–H), 7.79 (s, 1H, Ar–H), 7.74–7.63 (m, 4H, Ar–H), 7.50 (d, 1H, J = 8.2, Ar–H), 7.30 (d, 1H, J = 8.2, Hz, Ar–H), 7.01 (d, 1H, J = 8.2 Hz, Ar–H), 4.10 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.2 (C=O), 156.8, 155.2, 153.1, 150.0 (C–OH), 139.5, 136.4, 135.9, 130.9, 131.1 (3C), 130.2 (2C), 129.5 (C), 129.0 (2C), 128.6 (2C), 124.2 (C), 119.5 (C), 118.0, 117.3 (2C), 116.0, 112.0 (C), 43.0 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3423, 2500, 1720, 1622, 1595 cm−1; MS (ESI+): m/z = 547.10 ([M+H]+); and HRMS: m/z calcd for C30H18ClN2O3 ([M+H]+) 547.11960, found 547.11904.
(4-Chlorophenyl)(5-(4-hydroxy-3-(6-nitro-1H-benzo[d]imidazol-2-yl)benzyl)benzofuran-2-yl)methanone (4m)
From 0.150 g compound 3b (0.384 mmol, 1 eq), and 0.088 g amine (0.576 mmol, 1.5 eq), the compound 4m was obtained as pale yellow (0.127 g, 85%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 250–255 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.74 (s, 1H, NH), 11.90 (s, 1H, OH), 8.3 (d, 2H, J = 8.1 Hz, Ar–H), 8.00–7.76 (m, 4H, Ar–H), 7.68–7.69 (m, 4H, Ar–H), 7.65 (d, 3H, Ar–H), 4.12, (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.2 (C=O), 156.4, 155.0, 153.8 (N–C–N), 150.9 (C–OH), 149.2, 140.3 (C–NO2), 139.8, 138.2 (C–Cl), 137.6, 136.2, 132.9, 131.2 (3C), 130.0, 129.2 (2C), 126.0, 119.0, 118.8, 116.9 (2C), 116.1, 112.5, 112.0, 42.2 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3510, 3450, 2590, 1790, 1664, 1600 cm−1; MS (ESI+): m/z = 524.10 ([M+H]+); and HRMS: m/z calcd for C29H19ClN3O5 ([M+H]+) 524.10660, found 524.10604.
(4-Chlorophenyl)(5-(3-(6-fluoro-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)methanone (4n)
From 0.150 g compound 3b (0.384 mmol, 1 eq), and 0.072 g amine (0.576 mmol, 1.5 eq), the compound 4n was obtained as white solid (0.120 g, 80%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (80:20, v/v). m.p.: 240–254 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.02 (s, 1H, NH), 12.52 (s, 1H, Ar–OH, D2O exchangeable), 8.55 (d, 3H, J = 7.2 Hz, Ar–H), 7.80–7.46 (m, 7H, Ar–H), 7.45–6.85 (m, 4H, Ar–H), 4.00 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.2 (C=O), 156.9, 155.1, 150.9 (N–C–N), 150.3 (C–OH), 139.9, 138.0, 137.5 (2C), 134.6, 132.0, 131.0 (3C), 129.4 (2C), 126.0, 121.4, 119.9, 116.5 (2C), 116.8, 112.0, 109.5, 102.0, 42.0 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3460, 3423, 1735, 1655, 1587 cm−1; MS (ESI+): m/z = 463.21 ([M+H]+); and HRMS: m/z calcd for C29H19ClFN2O3 ([M+H]+) 463.19608, found 463.19642.
(4-Chlorophenyl)(5-(3-(5,6-dimethyl-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl) benzo furan-2-yl)methanone (4o)
From 0.200 g compound 3b (0.512 mmol, 1 eq), and 0.104 g amine (0.769 mmol, 1.5 eq) the compound 4o was obtained as brick red (0.15 g, 75%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (70:30, v/v). m.p.: 250–255 °C; 1H NMR (400 MHz, DMSO-d6): δ = 12.95 (s, 1H, NH), 10.81 (s, 1H, OH), 8.01–7.90 (m, 4H, Ar–H), 7.77–7.70 (m, 6H, Ar–H), 7.53–6.98 (m, 3H, Ar–H), 6.95 (s, 1H, Ar–H), 4.09 (s, 2H, CH2), 2.38 (s, 6H, 2CH3) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.5 (C=O), 157.0, 156.8, 153.0 (N–C–N), 151.6 (C–OH), 137.9 (C–Cl), 137.6 (2C), 136.0, 134.5, 132.8 (2C), 132.0, 131.1 (2C), 128.5 (2C), 127.0, 124.8, 120.0, 118.7, 116.3 (2C), 113.9 (2C), 112.6, 42.2 (–CH2–), 21.0 (2C) ppm; IR (KBr): \(\bar{\nu }\) = 3480, 3423, 1724, 1645, 1567 cm−1; MS (ESI+): m/z = 507.8 ([M+H]+); and HRMS: m/z calcd for C31H24ClN2O3 ([M+H]+) 507.86082, found 507.86020.
(5-(3-(6-Chloro-1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(4-chlorophenyl)methanone (4p)
From 0.150 g compound 3b (0.384 mmol, 1 eq), and 0.081 g amine (0.576 mmol, 1.5 eq), the compound 4p was obtained as light red solid (0.112 g, 75%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 235–237 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.12 (s, 1H, NH), 12.00 (s, 1H, OH), 8.02 (d, 2H, J = 7.5 Hz, Ar–H), 7.66–7.00 (m, 10H, Ar–H), 7.00 (d, 2H, J = 7.25 Hz, Ar–H), 4.00 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.2 (C=O), 155.9, 154.1, 153.4, 151.4, 137.9, 137.6 (2C), 135.3, 132.8, 132.1 (3C), 131.0, 129.9 (2C), 128.8 (2C), 126.9, 122.9, 118.3, 117.2 (3C), 116.6, 112.6, 42.0 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3458, 3400, 2570, 1795, 1655, 1597 cm−1; MS (ESI+): m/z = 513.1 ([M+H]+); and HRMS: m/z calcd for C29H19Cl2N2O3 ([M+H]+) 513.16082, found 513.16020.
(5-(4-Hydroxy-3-(1H-naphtho[2,3-d]imidazol-2-yl)benzyl)benzofuran-2-yl)(phenyl)methanone (4q)
From 0.200 g compound 3a (0.561 mmol, 1 eq), and 0.133 g amine (0.842 mmol, 1.5 eq) the compound 4q was obtained as white solid (0.172 g, 86%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 255–260 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.21 (s, 1H, NH), 9.97 (s, 1H, OH), 8.23 (s, 1H, Ar–H), 8.11 (s, 2H, Ar–H), 8.08–7.96 (m, 2H, Ar–H), 7.79–7.58 (m, 5H, Ar–H), 7.52 (t, 3H, J = 6.78 Hz, Ar–H), 7.51 (t, 1H, J = 5.7 Hz, Ar–H), 7.42 (s, 1H, Ar–H), 7.35 (s, 1H, Ar–H), 7.04 (d, 1H, J = 8.2 Hz, Ar–H), 4.18 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.1 (C=O), 156.3, 154.0, 152.9 (N–C–N), 151.5 (C–OH), 141.7 (2C), 138.2, 137.1, 136.7, 132.7, 131.9, 129.1, 128.6 (2C), 127.5 (2C), 127.0 (2C), 126.1, 122.9 (2C), 119.4, 118.6, 117.2, 117.0, 112.9 (2C), 112.2, 42.1 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3420, 2450, 1724, 1645,1547 cm−1; MS (ESI+): m/z = 495.23 ([M+H]+); and HRMS: m/z calcd for C33H23N2O3 ([M+H]+) 495.17081, found 495.17032.
(5-(4-Hydroxy-3-(1H-imidazo[4,5-b]pyridin-2-yl)benzyl)benzofuran-2-yl)(phenyl)methanone (4r)
From 0.150 g compound 3a (0.421 mmol, 1 eq), and 0.068 g amine (0.632 mmol, 1.5 eq), the compound 4r was obtained as white solid (0.120 g, 80%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 240–245 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.84 (s, 1H, NH), 12.83 (s, 1H, OH), 8.18–7.95 (m, 4H, Ar–H), 7.81–7.62 (m, 4H, Ar–H), 7.65-7.57 (t, 2H, Ar–H), 7.52 (d, 1H, J = 8.7 Hz, Ar–H), 7.32 (s, 2H, Ar–H), 7.01 (t, 1H, J = 8.2 Hz, Ar–H), 4.09 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.3 (C=O), 157.9, 153.2 (C–OH), 154.3, 151.4, 150.5, 144.5, 137.8, 136.9, 136.7, 135.3, 131.0, 130.3, 129.7, 129.7 (2C), 127.9 (2C), 126.9, 123.1, 121.8, 118.4, 117.7, 116.9 (2C), 112.2 (2C), 44.3 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3450, 3420, 1725, 1645, 1557 cm−1; MS (ESI+): m/z = 446.19 ([M+H]+); and HRMS: m/z calcd for C28H20N3O3 ([M+H]+) 446.11531, found 446.11570.
(5-(3-(5-Bromo-1H-imidazo[4,5-b]pyridin-2yl)4hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone (4s)
From 0.180 g compound 3a (0.505 mmol, 1 eq), and 0.141 g amine (0.758 mmol, 1.5 eq), the compound 4s was obtained as yellow solid (0.140 g, 78%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 230–235 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.22 (s, 1H, NH), 12.58 (s, 1H, OH), 8.05 (s, 3H, Ar–H), 7.80–7.38 (m, 8H, Ar–H), 7.28 (s, 1H, Ar–H), 7.12 (d, 1H, Ar–H), 7.01 (s, 1H, Ar–H), 4.04 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 183.3 (C=O), 156.1, 154.0, 153.4, 151.6, 137.4, 136.7, 134.5, 134.1, 132.9, 132.2, 131.9, 130.0, 129.8 (2C), 129.0 (2C), 128.6 (2C), 126.4, 122.9, 121.7, 117.3, 116.9, 112.1, 42.3 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3580, 3423, 2650, 1730, 1651, 1554 cm−1; MS (ESI+): m/z = 423.99 ([M+H]+); and HRMS: m/z calcd for C28H19BrN3O3 ([M+H]+) 423.72551, found 423.72571.
(4-Chlorophenyl)(5-(4-hydroxy-3-(3H-imidazo[4,5-b]pyridin-2-yl)benzyl)benzofuran-2-yl)methanone (4t)
From 0.200 g compound 3b (0.512 mmol, 1 eq), and 0.083 g amine (0.769 mmol, 1.5 eq), the compound 4t was obtained as white solid (0.160 g, 80%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 240–245 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.85 (s, 1H, NH), 12.80 (s, 1H, Ar–OH, D2O exchangeable), 8.40 (m, 1H, Ar–H), 8.20–8.00 (m, 4H, Ar–H), 7.85–7.67 (m, 3H, Ar–H), 7.40–7.20 (d, 3H, J = 8.6 Hz, Ar–H), 7.38 (m, 2H, Ar–H), 4.05 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.2 (C=O), 159.2, 154.1, 153.1 (C–OH), 151.4, 150.5, 144.3 (C=N), 137.9, 137.6, 136.7, 135.3, 131.0, 130.9, 129.9, 129.5 (2C), 128.3 (2C), 126.9, 122.9, 122.0, 118.5, 117.3, 117.2 (2C), 112.2, 44.0 (–CH2–) ppm; IR (KBr): \(\bar{\nu }\) = 3450, 3425,1725, 1645, 1557 cm−1; MS (ESI+): m/z = 480.1 ([M+H]+); and HRMS: m/z calcd for C28H19ClN3O3 ([M+H]+) 480.09541, found 480.09581.
(5-(3-(5-Bromo-3H-imidazo[4,5-b]pyridin-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(4-chloro phenyl)methanone (4u)
From 0.250 g compound 3b (0.641 mmol, 1 eq), and 0.178 g amine (0.961 mmol, 1.5 eq), the compound 4u was obtained as light brown solid (0.195 g, 78%) after purified using chromatography on a silica gel column with petroleum ether/ethyl acetate (90:10, v/v). m.p.: 230–235 °C; 1H NMR (400 MHz, DMSO-d6): δ = 13.29 (s, 1H, NH), 12.35 (s, 1H, OH), 8.03 (s, 4H, Ar–H), 7.83–7.63 (m, 5H, Ar–H), 7.43 (t, 2H, Ar–H), 7.33 (s, 1H, Ar–H), 7.02 (d, 1H, J = 6.5, Ar–H), 4.04 (s, 2H, CH2) ppm; 13C NMR (100 MHz, DMSO-d6): δ = 182.1 (C=O), 159.1, 155.4, 153.1, 151.6, 142.5, 140.1, 137.9, 134.5, 133.9, 132.9, 132.6, 131.9 (2C), 129.1 (2C), 129.8 (2C), 128.7 (2C), 126.9, 122.9, 119.4, 117.4, 117.3, 117.0, 112.9, 42.6 (–CH–) ppm; IR (KBr): \(\bar{\nu }\) = 3580, 3435, 2650, 1730, 1651, 1554 cm−1; MS (ESI+): m/z = 557.0 ([M+H]+); and HRMS: m/z calcd for C28H18BrClN3O3 ([M+H]+) 557.02551, found 557.02621.
In vitro antimicrobial assay
Antimicrobial activity was evaluated using agar well diffusion method. The activity was determined by measuring the diameter of the inhibition zone (in mm). Samples of the tested compounds (50 μL, 1 mg/mL concentration) were loaded into the wells on the plates. All solutions were prepared in DMSO and pure DMSO was loaded as control. The plates were kept for incubation at 35 °C for 1–5 days and then were examined for the formation of inhibition zone. Each inhibition zone was measured three times to get an average value. The test was performed three times for each bacterium culture [26,27,28].
Minimal inhibitory concentration (MIC) measurement
The microorganism’s susceptibility tests in nutrient and potato dextrose broths were used for the determination of MIC. Stock 1000 μg/mL solutions of the tested compounds, ciprofloxacin and nystatin were prepared in DMSO followed by dilutions to 250–25 μg/mL concentrations. Inoculated microorganism suspensions were incubated at 37 °C for 1–5 days for MIC determination. The microorganism suspensions were inoculated into the concentrations of corresponding compounds and control experiments and listed in Tables 1 and 2 respectively.
Evaluation of cell cytotoxicity
Hela, Supt1 cancer cell lines were used to evaluate the impact on cell viability of each compound. Hela cells were maintained in DMEM, Supt1 cells in RPMI, all the mediums were supplemented with 10% fetal bovine serum (FBS) cells were maintained in keratinocyte serum free media with 0.1 ng/mL human recombinant EGF, 0.05 mg/mL bovine pituitary extract and additional CaCl2 44.1 mg/mL (final concentration 0.4 mM), 2 mM l-glutamine at 37 °C under a 5% CO2 atmosphere. For each cell line, 70% confluent cell culture flask was trypsinized and were seeded cells in a 96-well plate at a density of 5000 cells by well in the appropriate complete media; These cells were treated with increasing concentrations of drugs, and incubated for 24 h. The cells were washed with media and resuspended in new medium. To this, 20 mL of 5 mg/mL MTT (Sigma-Aldrich) was added and incubated for 4f. The medium was removed from cells, and dissolved in DMSO (DMSO 0.1% in phosphate saline buffer) and read in an ELISA micro plate reader at 570 nm; 48 h after treatment, viability was accessed by MTT assay.
Conclusions
In conclusion, the present work offers the promotion of a simple procedure in an inexpensive route for the synthesis of benzimidazole derivatives (4a–u) via condensation of 5-((2-benzoylbenzofuran-5-yl)methyl)-2hydroxybenzaldehyde with ortho phenylenediamine under conventional heating. The biological evolution exhibited that these molecules (4a–u) were good and selective against bacterial and fungal strains in the micro molar range. The experimental antimicrobial studies resulted that the compounds (4f) and (4u) are good inhibitors for antibacterial and antifungal activities respectively. The compounds of (4f) and (4u) have proven potential against cancer cell lines. Interestingly, the compound concentration increases nature of cytotoxicity also increasing. Molecular docking study revealed that not only hydrogen bonding interactions, π–π stacking, π–cation and Mn metal co-ordination interactions were also favourable for its antibacterial activity.
References
World Health Organisation (2015) Cancer fact sheet no-297. World Health Organisation, Geneva
Mareel Z, Leroy A (2003) Clinical, cellular, and molecular aspects of cancer invasion. Physiol Rev 83(2):337–376
Wesche J, Haglund K, Haugsten EM (2011) Fibroblast growth factors and their receptors in cancer. Biochem J 7(2):199–213
Zheng H, Dong Y, Li L, Sun B, Liu L, Yuan H, Lou H (2016) Novel benzo[a]quinolizidine analogs induce cancer cell death through paraptosis and apoptosis. J Med Chem 59(10):5063–5076
Salton MRJ, Kim KS (1996) Structure in: barons medical microbiology (Baron S et al., eds), 4th edn. University of Texas Medical Branch, Galveston
Shadia AG, Ahmed SA, Mireya LR, Sean M, HodaI ED (2010) Synthesis and studying the antitumor activity of novel 5-(2-methylbenzimidazol-5-yl)-1,3,4-oxadiazole-2(3H)-thiones. Eur J Chem 1(2):67–72
Wright JB (1951) The chemistry of benzimidazoles. Chem Rev 48:397–541
Bansal Y, Sailakari O (2012) The therapeutic journey of benzimidazoles. Bioorg Med Chem 20:6208–6236
Gellis A, Kovacic H, Boufatah N, Vanelle P (2008) Synthesis and cytotoxicity evaluation of some benzimidazole-4,7-diones as bioreductive anticancer agents. Eur J Med Chem 43:1858–1864
Hranjec M, Starcevic K, Piantanida I, Kralj M, Marjanovic M, Hasani M, Westman G, Karminski-Zamola G (2008) Synthesis, antitumour evaluation and DNA binding studies of novel amidino-benzimidazolyl substituted derivatives of furyl phenyl and thienyl phenyl acrylates, naphthofurans and naphthothiophenes. Eur J Med Chem 43(12):2877–2890
Funao K (2007) Antitumor effect of telmisartan in prostate cancer. Urology 70:300
Jabali JV, Keyur PT, Rahul SK (2011) An improved synthesis of 2-mercapto 5-difluoromethoxy-1H benzimidazole an important medicinal intermediate. Adv Appl Sci Res 2(3):89–93
Goker H, Ayhan-Kilcigil G, Tuncbilek M, Kus C, Ertan R, Kendi E, Ozbey S, Fort M, Garcia C, Farre AJ (1999) Synthesis and antihistaminic H1 activity of 1,2,5(6)-trisubstituted benzimidazoles. Heterocycles 51:2561–2573
Can Eke B, Puskullu MO, Buyukbingol E, Mscan I (1998) A study on the antioxidant capacities of some benzimidazoles in rat tissues. Chem Biol Interact 113:65–77
Kus C, Ayhan-Kilcigil G, Eke BC (2004) Synthesis and antioxidant properties of some novel benzimidazole derivatives on lipid peroxidation in the bat liver. Arch Pharm Res 27:156–163
Ozden S, Atabey D, Yildiz S, Goker H, Goker H (2005) Synthesis and potent antimicrobial activity of some novel methyl or ethyl 1H-benzimidazole-5-carboxylates derivatives carrying amide or amidine groups. Bioorg Med Chem 13(5):1587–1597
Shankar B, Jalapathi P, Anil V, Kishor Kumar A, Saikrishna B, Karunakarrao K (2017) Synthesis and biological evaluation of new 2-(6-alkyl-pyrazin-2-yl)-1H-benz[d]imidazoles as potent anti-inflammatory and anti oxidant agents. Med Chem Res 26:1835–1846
Penning TD, Zhu GD, Gandhi VB, Gong J, Thomas S, Lubisch W, Grandel R, Wernet W (2008) Discovery and SAR of 2-(1-propylpiperidin-4-yl)-1H-benzimidazole-4-carboxamide: a potent inhibitor of poly (ADP-ribose) polymerase (PARP) for the treatment of cancer. Bioorg Med Chem 16(14):6965–6975
Thirupathi RY, Konjeti RS, Nidish S, Narsimha RP, Freeman ML, Crooks PA (2010) Novel substituted (Z)-((N-benzyl-1H-indol-3-yl) methylene)imidazolidine-2,4-diones and 5-((N-benzyl-1H-indol-3-yl)methylene)pyrimidine-2,4,6(1H, 3H, 5H)triones as potent radio-sensitizing agents. Bioorg Med Chem Lett 20(2):600–602
Frere S, Thiery V, Bailly C, Besson T (2003) Novel 6-substituted benzothiazol-2y-indolo[1,2-c]quinazolines and benzimidazo[1,2-c]quinazolines. Tetrahedron 59(6):773–779
Kumar BV, Vaidya SD, Kumar RV, Bhirud SB, Mane RB (2006) Synthesis and anti-bacterial activity of some novel 2-(6-fluorochroman-2-yl)-1-alkyl/acyl/aroyl-1H-benzimidazoles. Eur J Med Chem 41(5):599–604
Kawasaki K, Masubachi M, Morikami K, Sogebe S, Aoyama T, Ebiike H, Niizuma S, Hayase M, Fujii T, Sakata K, Shindoh H, Shiratori Y, Aoki Y, Ohtsuka T, Shimma N (2003) Design and synthesis of novel benzofurans as a new class of antifungal agents targeting fungal N-myristoyltransferase. Bioorg Med Chem Lett 13:87–91
Marvel C, Sand Turkey N (1957) Heat-stability studies on chelates from Schiff bases of salicylaldehyde derivatives. J Am Chem Soc 79:6000
Shankar B, Jalapathi P, Nagamani M, Bharath G, Karunakarrao K (2017) Synthesis, anti-microbial activity, and cytotoxicity of novel 1-[5-[6-[(2-benzoylbenzofuran-5-yl)methyl]-2-oxo-2H-chromen-3-yl]thiazol-2-yl]urea derivatives. Monatshefte Chem Chem Mon 148:999–1009
Shankar B, Jalapathi P, Sunitha V, Karunakar Rao K (2016) Synthesis of 5,5′-methylene bis(benzofuran-5,2-diyl))bis(phenylmethanone) and its phenylhydrazonoe, benzenesulfonate derivatives and their anti-inflammatory activity. Der Pharma Chem 8:192–199
Shankar B, Jalapathi P, Ramesh M, Kishorekumar A, Raghavender M, Bharath G (2016) Synthesis, antimicrobial evaluation and docking studies of some novel benzofuran based analogues of chalcone and 1,4-benzodiazepine. Russ J Gen Chem 86(7):1711–1721
Singh V, Katiyar D (2017) Synthesis, antimicrobial, cytotoxic and E. coli DNA gyrase inhibitory activities of coumarinyl amino alcohols. Bioorg Chem 71:120–127
Bax BD, Chan PF, Eggleston DS, Fosberry A, Gentry DR, Gorrec F, Giordano I, Hann MM, Hennessy A, Hibbs M, Huang J, Jones J, Brown KK, Spitzfaden CE (2010) Type IIA topoisomerase inhibition by a new class of antibacterial agents. Nature 466(7309):935–940
Schrödinger (2011) Prime version 3.0. LLC, New York. https://www.schrodinger.com/prime
Schrödinger (2011) Glide version 5.6. LLC, New York. Extra precision (XP) docking protocols. https://www.schrodinger.com/glide
Friesner RA, Banks JL, Murphy RB, Halgren TA, Klicic JJ, Mainz DT, Repasky MP, Knoll EH, Shelley M, Perry JK, Shaw DE, Francis P, Shenkin PS (2004) Glide: a new approach for rapid, accurate docking and scoring. 1. Method and assessment of docking accuracy. J Med Chem 47(7):1739–1749
Authors’ contributions
BS were responsible in each stage in the preparation of this manuscript like carried the literature study, designing of synthetic schemes, organic synthesis and purification of compounds and characterization experiments with the direct supervision of PJ. SP carried out the antimicrobial and cytotoxicity. BSK and MV were responsible for the docking study. All authors read and approved the final manuscript.
Acknowledgements
The author, Bhookya Shankar, thanks to the UGC-BSR, (RFSMS-Award No. 805/Chem./2013), New Delhi, India, for providing the financial assistance in the form of Senior Research Fellowship (SRF) and Central Facilities for Research and Development, Osmania University, Hyderabad, India, for providing analytical support.
Competing interests
The authors declare that they have no competing interests.
Availability of data and materials
All data are fully available without restriction.
Consent for publication
The authors declare that the copyright belongs to the journal.
Ethics approval and consent to participate
Not applicable.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Author information
Authors and Affiliations
Corresponding author
Additional file
Additional file 1.
Predicted ADME (Drug-likeness) properties of all synthesized compounds and selected copies of spectrum (1H/13C-NMR, MS and HRMS) for synthesized some benzimidazole derivatives are provided in supporting information.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Shankar, B., Jalapathi, P., Saikrishna, B. et al. Synthesis, anti-microbial activity, cytotoxicity of some novel substituted (5-(3-(1H-benzo[d]imidazol-2-yl)-4-hydroxybenzyl)benzofuran-2-yl)(phenyl)methanone analogs. Chemistry Central Journal 12, 1 (2018). https://doi.org/10.1186/s13065-017-0364-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s13065-017-0364-3