Background

Fluorinated compounds are intriguing for the development of pharmaceuticals, agrochemicals, and materials, and thus, much effort has been exerted to develop more general and efficient approaches for introducing fluorine atom(s) or fluoroalkyl group(s) into organic molecules [1,2,3,4]. The unique properties of fluoro organic molecules may arise from the properties such as (i) the greatest electronegativity of fluorine, (ii) the largest strength of the carbon–fluorine bond, (iii) the hardness and the low van der Waals interaction due to the low polarizability, (iv) the increased hydrophobicity, and (v) the second smallest atomic radius of the fluorine atom. These factors are operative singly or sometimes cooperatively to affect the pharmacological properties of the fluorinated molecules [5]. The majority of fluorinated drugs are constructed by five- and six-membered nitrogen heterocycles containing fluorine, trifluoromethyl, difluoromethyl, fluoromethyl, 2,2,2-trifluoroethyl, and pentafluoroethyl groups [6]. An increasing number of fluorinated antimitotic/antitumour agents have now becoming available for cancer treatment. The most widely used are the 5-fluoropyrimidines such as 5-fluorouracil (5-FU) and 5-fluoro-2\-deoxyuridine (FdUrd) [7, 8], (Fig. 1). The thiourea derivatives represent one of the most promising classes of anticancer agents with a wide range of activities against various leukemia and solid tumors [9,10,11,12,13,14,15,16,17]. They play an important role as anticancer agents because of their good inhibitory activity against protein tyrosine kinases (PTKs), [10,11,12,13] human sirtuin type proteins 1 and 2 (SIRT1 and SIRT2), [14] topoisomerase II [15] and DNA repair synthesis [16]. Furthermore, fluorinated aryl thioureas represent a new class of potent anti-trypanosomal agents [18] and also a novel class of potent influenza virus neuraminidase inhibitors [19]. Thiocarlide is a pharmacologically important thiourea drug that is used as a therapeutic agent in the treatment of tuberculosis [20] and Phenethylthiazoylthiourea (PETT) derivatives (LY73497 and trovirdine HCl) [21, 22] have been discovered as potent inhibitors of HIV type 1, (Fig. 1).

Fig. 1
figure 1

Fluorinated and thiourea anticancer agents

Full size image

Literature survey revealed that sulfonamides are a significant class of compounds in medicinal and pharmaceutical chemistry with several biological applications [23]. Today, they are widely used as antimicrobial agent, chiefly because of their low cost, low toxicity and excellent activity against bacterial diseases [24]. Some important sulfonamide derivatives used as carbonic anhydrase inhibitors of commercial importance [25]. They are also effective for the treatment of urinary, intestine, and ophthalmic infections, scalds, ulcerative colitis [26], rheumatoid arthritis [27], male erectile dysfunction as the phosphodiesterase-5 inhibitor sildenafil-better known under its commercial name, Viagra [28], and obesity [29]. More recently, sulfonamides are used as an anticancer agent [30], as the antiviral HIV protease inhibitor amprenavir [31] and in Alzheimer’s disease [32]. Prompted by the above facts and in continuation of our interest in biologically active compounds [33,34,35] we hereby report the synthesis of some novel of fluorinated N-(2,6-dimethoxypyrimidin-4-yl)-4-(3-(aryl)thioureido)benzenesulfonamides 3a–e and 4a–d from readily available starting material to evaluate their antimicrobial and anticancer activity.

Results and discussion

Chemistry

Isothiocyanates are useful and widely used building blocks in the synthesis of nitrogen, sulfur and oxygen heterocycles and organometallic compounds of academic, pharmaceutical and industrial interest [36]. The high electrophilicity and nucleophilicity associated with the carbon and sulfur atoms, respectively, of the isothiocyanates and their extended π electron system make them unique precursors of a large variety of target molecules. Consequently, many classes of five and six-membered nitrogen and sulfur heterocycles, either carrying various substituents or fused with benzo or non-benzo nuclei to interesting poly heterocycles, have been synthesized from isothiocyanates which is undoubtedly a landmark in organosulfur chemistry [37]. The intermediate, N-(2,6-dimethoxypyrimidin-4-yl)-4-isothiocyanatobenzenesulfonamide 2 used for the preparation of target compounds have been synthesized in high yield via thiophosgenation of sulfa-dimethoxazine 1 at room temperature in the presence of dilute hydrochloric acid, according to literature procedure [38] (Scheme 1).

Scheme 1
scheme 1

Synthesis of N-(2,6-dimethoxypyrimidin-4-yl)-4-isothiocyanato-benzenesulfonamide 2

Full size image

The synthesis of N-(2,6-dimethoxypyrimidin-4-yl)-4-(3-(aryl) thio-ureido)benzenesulfonamides 3a–e is outlined in Scheme 2. Treatment of isothiocyanato benzenesulfonamide 2 with a variety of fluorinated aromatic amines in dry dioxane at reflux temperature in the presence of a catalytic amounts of triethylamine furnished the novel fluorinated N,N-disubstituted thioureas 3a–e in high yields (80–92%).The structure of the products 3a–e were established via inspection of their spectral data. Thioureas 3a–e were confirmed by the absence of characteristic infrared absorption peak at 2000–2200 cm−1 (N=C=S group). Also, the infrared of 3 is characterized by the presence of the NH, CN, thiocarbonyl (CS) and SO2 absorption bands. For example, the 1H NMR of compound 3a showed two singlets at δ 3.81, 3.84 ppm which were assigned for two methoxy protons, a singlet at δ 5.9 ppm assigned to the pyrimidine-H, two downfield singlets at δ 11.8, and 14.0 ppm which were readily assigned to the HN(1) and HN(2) protons, in addition to the presence of SO2NH and aromatic protons. The thiocarbonyl group of thiourea moiety was also observed in 13C-NMR. The formation of thiourea 3a–e can be explained by the reaction pathway depicted in Fig. 2.

Scheme 2
scheme 2

Synthetic route and structures for thiourea derivatives (3a–e)

Full size image
Fig. 2
figure 2

The proposed mechanism for the formation of thiourea

Full size image

The nucleophilic attack of the amino group of the aromatic amine on thiocarbonyl group of isothiocyanate leads to formation of an intermediate (A). During the consecutive steps, deprotonation and protonation of the intermediate results in the formation of the final product thiourea. Under similar reaction conditions, treatment of isothiocyanate 2 with fluorinated heterocyclic amines such as 2-amino-2,3,5,6-tetrafluoropyridine, 2-amino-6-fluorobenzothiazole, 2-amino-5-(trifluoromethyl)-1,3,4-thiadiazole and 7-amino-4-(trifluoromethyl)-coumarine afforded the corresponding fluorinated heterocyclic thioureas 4a–d, (Scheme 3). The composition and structure of products 4a–d were confirmed by the results of elemental analysis and data of IR and NMR spectra. The infrared of structure 4 displayed absorption band assignable for NH, thiocarbonyl (CS) and SO2 groups. The infrared of 4c exhibited stretching frequencies at 3415, 3310, 2978, 2841 and 1618 cm−1 for the two NH, CH-aliph and CN groups, in addition to the presence of absorption bands corresponding to SO2 and CS at 1311, 1195, 1274 cm−1. Its 1H NMR showed two singlets at δ 3.64, 3.66 ppm which were assigned for two methoxy protons, a singlet at δ 6.5 ppm assigned to the pyrimidine-H, two downfield singlets at δ 11.8, and 12.4 ppm which were readily assigned to the HN(1) and HN(2) protons, in addition to the presence of SO2NH and aromatic protons (Scheme 3).

Scheme 3
scheme 3

Synthetic route and structures for thiourea derivatives (4a–d)

Full size image

Antimicrobial evaluation

The newly synthesized target compounds were evaluated for their in vitro antibacterial activity against Streptococcus pneumoniae and Bacillus subtilis as examples of Gram-positive bacteria and Pseudomonas aeruginosa and Escherichia coli as examples of Gram-negative bacteria. They were also evaluated for their in vitro antifungal potential against a representative panel of fungal strains i.e. Aspergillus fumigatus, and Candida albicans. The organisms were tested against the activity of solutions of concentrations (1 mg/mL) and using inhibition zone diameter in mm as criterion for the antimicrobial activity (agar well diffusion method). The results of testing for antibacterial and antifungal effects are summarized in Table 1. As shown by these results, the newly synthesized compounds tested displayed variable in vitro antibacterial and antifungal activities.

Table 1 In vitro antimicrobial activities of the synthesized fluorinated compounds tested at 1 mg/mL by well diffusion agar assay and expressed as inhibition zone diameter (mm) in the form of mean ± SD
Full size table

From the screening results, it can be seen that compound 4a showed the highest activity against Gram positive bacteria B. subtilis followed by compounds 4c, 4d, 3d and 4b, respectively. Similarly, compound 4a showed the highest activity against Gram positive bacteria S. pneumoniae followed by compounds 4d, 3d, 4c, and 4b, respectively using ampicillin as reference drug. Compound 4a showed inhibition zone of 20.6 ± 1.5 mm in case of S. pneumoniae compared to inhibition zone of 23.8 ± 0.6 mm attributed to ampicillin while in case of B. subtilis, compound 4a showed inhibition zone of 22.1 ± 1.2 mm compared to inhibition zone of 26.4 ± 0.7 mm due to ampicillin. On the other hand, compound 4a showed the highest activity against Gram negative bacteria (P. aeruginosa and E. coli) compared with the standard drug followed by compounds 3d, and 4b, respectively. Compound 4a showed inhibition zone of 17.2 ± 1.5 mm in case of P. aeruginosa compared to inhibition zone of 19.7 ± 0.6 mm attributed to gentamycin while in case of E. coli, compound 4a showed inhibition zone of 21.3 ± 0.8 mm compared to inhibition zone of 24.9 ± 1.5 mm due to gentamycin. Interestingly, compounds 4c and 4d exhibited selective antibacterial activities against Gram positive bacteria.

Regarding the activity of the tested compounds against the tested filamentous fungus A. fumigatus, the order of activity 4a, 3d, and 4b. No antimicrobial activities were detected for compounds 3a, 3c and 3e. Also, none of the tested compound exerts any activity against the pathogenic yeast species ( C. albicans) under these screening conditions. Compound 4a was the most active compound in this case also. Compound 4a showed inhibition zone of 20.1 ± 1.3 mm compared to 23.7 ± 1.2 mm exhibited by amphotrecin B. The antimicrobial activities of the most active synthesized fluorinated compounds were also tested to determine the minimum inhibitory concentration (Table 2). Moreover, compound 4a showed the highest activity (MIC values ranged from 1.95 to 15.63 µg/mL), followed by 3d (MIC 7.81–250 µg/mL) and 4b (MIC 7.81–250 µg/mL).

Table 2 The antimicrobial activities of the most active synthesized fluorinated compounds expressed as minimum inhibitory concentration (µg/mL)
Full size table

Structure activity relationship

Regarding activity against Gram positive bacteria, mono substituted fluorophenyl derivatives 3a–3c showed no activity also the nitro fuolorinated derivative 3e was also inactive. The best activity was attributed to tetrafluoro pyridine derivative 4a indicating that increasing the number of fluoro substitutions has good impact on activity followed by trifluoromethyl derivatives 4c and 4d with tri fluoro substitution and finally the fluoro methoxy derivative 3d and the fluorinated benzothiazole derivative 4b. Similarly, The tetrafluoro pyridine derivative 4a was the most active compound on Gram negative bacteria. Also in case of antifungal activity the tetrafluoro pyridine derivative 4a was the most active compound.

Cytotoxic activity

The in vitro growth inhibitory activity of the synthesized compounds was investigated in comparison with the well-known anticancer standard drugs (5-flourouracil and cisplatin) under the same conditions using colorimetric MTT assay. Data generated were used to plot a dose response curve of which the concentration of test compounds required to kill 50% of cell population (IC50) was determined (Fig. 3). The results revealed that all the tested compounds showed inhibitory activity to the tumor cell lines in a concentration dependent manner. Cytotoxic activity was expressed as the mean IC50 of three independent experiments.

Fig. 3
figure 3

The dose response curve showing the in vitro inhibitory activity of the tested compounds against liver carcinoma (HepG2) cell line compared with reference drugs cisplatin and 5-flourouracil

Full size image

Interestingly, the results are represented in Table 3 and Fig. 3 showed that compound 4a was the most active against the liver carcinoma cell line (HepG2), showing more activity than the reference drugs with IC50 value of 4.8 μg/mL compared to 5-flourouracil with IC50 value of 4.9 μg/mL and cisplatin with IC50 value of 18.8 μg/mL. Compound 3c exhibited good antitumor activity against the liver carcinoma cell line (HepG2) showing almost the same activity as cisplatin followed by 4b, 4c, 3d and 3a, respectively. The tested compounds showed lower tendency to inhibit the breast carcinoma cells than those observed for liver carcinoma (Fig. 4). The order of activity against breast carcinoma cell line (MCF-7) was 4a, 3c, 4b, and 4c, respectively. Moreover, compounds 3a, 3d, 3e and 4d were less active among their analogues against the two tumor cell lines.

Table 3 The antitumor activities of the tested compounds expressed as IC50 values and compared with reference standard drugs evaluated on breast and liver cancer cell lines
Full size table
Fig. 4
figure 4

The dose response curve showing the in vitro inhibitory activity of the tested compounds against breast carcinoma (MCF-7) cell line compared with reference drugs cisplatin and 5-flourouracil

Full size image

Molecular docking

One of the most important enzymes that controls signal transduction and cell proliferation is mitogen-activated protein kinase-activated protein kinase 2 (MAPKAPK-2 or MK-2) [39]. Discovering new inhibitors for this key enzyme has received attention as a strategy in the seek for novel anticancer agents [40]. Among the newly discovered inhibitors for this enzyme, several urea and thiourea derivatives have showed good activity [41]. In the present research, several thiourea derivatives were synthesized and evaluated for their cytotoxic activity. The most active derivatives 3c and 4a–4c were docked on the active site of MK-2 enzyme in a trial to suggest a mechanism of action for their cytotoxic activity. The protein data bank file (PDB: 3WI6). The file contains MK-2 enzyme co-crystalized with an inhibitor. All docking procedures were achieved by MOE (Molecular Operating Environment) software 10.2008 provided by chemical computing group, Canada. The inhibitor interacts with MK-2 active site with four hydrogen bonds involving Glu 190, Leu 141, Asn 191 ans Asp 207 (Fig. 5). The docking protocol was validated by redocking of the ligand on the active site of MK-2 enzyme with energy score (S) = −15.4978 kcal/mol and root mean square deviation (RMSD) = 1.1457.

Fig. 5
figure 5

Co-crystallized ligand in the active site of mitogen activated kinase (MK-2)

Full size image

The previous docking protocol was followed for compounds 3c and 4a–4c. All the docked compounds were fit on the active site of MK-2 enzyme. Docking scores and amino acid interactions for the docked compounds were summarized in Table 4.

Table 4 Docking scores and amino acid interactions of the docked compounds on the active site of mitogen activated kinase (MK-2)
Full size table

On a closer look on Table 4 we can conclude that: all four compounds showed docking score better than the co-crystallized ligand in the range of (−16.2293 to 22.9000 kcal/mol). The best docking score was displayed by compound 4c (Fig. 6).

Fig. 6
figure 6

Compound 4c in the active site of mitogen activated kinase (MK-2)

Full size image

In case of amino acid interactions, compound 4a is the only compound that exhibited two interactions with Leu 141 and Asp 207 by two hydrogen bond of 2.96 and 2.22 Å, respectively (Fig. 7) which may explain its promising cytotoxic activity.

Fig. 7
figure 7

Compound 4c in the active site of mitogen activated kinase (MK-2)

Full size image

Conclusion

In conclusion, synthesis, structural elucidation, antimicrobial and anticancer activities of a new series of N-(2,6-dimethoxypyrimidin-4-yl)-4-(3-(aryl) thioureido)benzenesulfonamides 3a–e and 4a–d were reported. Compound 4a was the most active compound against Gram positive bacteria (B. subtilis and S. pneumoniae), Gram negative bacteria (P. aeruginosa and E. coli) and fungi (A. fumigatus). Interestingly, compounds 4c and 4d were selective to Gram positive bacteria. Compound 4a was the most active compound in cytotoxic assay against breast cancer cell line (MCF-7) and hepatic cancer cell line (HepG2). Compound 4a was more active than the standard drug 5-flourouracil in case of hepatic cancer cell line (HepG2). Molecular docking of compound 4a on the active site of mitogen activated kinase (MK-2) revealed good amino acid interactions.

Experimental

General chemistry

Melting points (uncorrected) were determined in an open capillary in a Gallenkamp melting point apparatus (Sanyo Gallenkamp, UK). Pre coated silica gel plates (Kieselgel 0.25 mm, 60 F254, Merck, Germany) were used for thin layer chromatography. A developing solvent system of chloroform/methanol (8:2) was used and the spots were detected by ultraviolet light. IR spectra (KBr disc) were recorded using an FT-IR spectrophotometer (Perkin Elmer, USA). 1H NMR spectra were scanned on an NMR spectrophotometer (Bruker AXS Inc., Switzerland), operating at 500 MHz for 1H- and 125.76 MHz for 13C NMR. Chemical shifts are expressed in δ values (ppm) relative to TMS as an internal standard, using DMSO-d 6 as a solvent. Elemental analyses were done on a model 2400 CHNSO analyser (Perkin Elmer, USA). All values were within ±0.4% of the theoretical values. All reagents used were of AR grade.

General procedure for N-(2,6-dimethoxypyrimidin-4-yl)-4-(3- (aryl) thioureido)benzenesulfonamides 3a–e and 4a–d

To a mixture of isothiocyanatobenzenesulfonamide 2 (0.01 mol) and fluorinated aromatic amine (0.01 mol) in dioxane (30 mL), triethylamine (0.1 mL) was added. The reaction mixture was heated under reflux for 1 h. The solvent was removed by evaporation under reduced pressure and the remainder was left to cool. The solid product so formed was collected by filtration, washed with petroleum ether (bp 40–60 °C) and the crude product recrystallized from ethanol to afford thiourea derivatives.

N-(2, 6-Dimethoxy-pyrimidin-4-yl)-4-[3-(2-fluoro-phenyl)-thioureido]enzene-sulfonamide (3a)

This compound was obtained as brown crystals from ethanol; yield 83%; m.p. 348.1 °C. IR: 3444, 3354, 3232 (NH), 3091 (arom.), 2956, 2810 (aliph.), 1568 (CN), 1361, 1180 (SO2), 1265 (CS). 1HNMR: δ 3.81, 3.84 [2 s, 6H, 2OCH3], 5.9 [s, 1H, H- pyrimidine], 6.7–8.0 [m, 8H, Ar–H], 10.2 [s, 1H, SO2NH], 11.8, 14.0 [2 s, 2H, 2NH]; 13C-NMR: 55.2, 55.8, 87.0, 113.1, 122.9 (3), 128.4 (2), 129.1 (2), 131.5, 133.8, 140.0, 162.7 (2), 165.3, 170.2, 182.0. Anal. Calcd. for C19H18FN5O4S2:C, 49.24%; H, 3.91%; F, 4.10%; N, 15.11%; S, 13.84%. Found: C, 49.30%; H, 3.80%; F, 4.20%; N, 15.12%; S, 13.84%.

N-(2,6-Dimethoxy-pyrimidin-4-yl)-4-[3-(3-fluoro-phenyl)-thioureido]benzene-sulfonamide (3b)

This compound was obtained as brown crystals from ethanol; yield 87%; m.p. 133.9 °C. IR: 3446, 3365 (NH), 3100 (arom.), 2978, 2831 (aliph.), 1635 (CN), 1396, 1182 (SO2), 1274 (CS). 1HNMR: δ 3.80, 3.83 [2 s, 6H, 2OCH3], 6.4 [s, 1H, H -pyrimidine], 6.9–8.4 [m, 8H, Ar–H], 9.8 [s, 1H, SO2NH], 11.7 [s, 2H, 2NH]; 13C-NMR: 55.4, 56.5, 80.0, 112.7, 120.6, 121.2, 123.7 (2), 128.1 (2), 132.6 (2), 137.0, 142.6, 163.0, 164.5, 164.9, 178.4, 179.8. Anal. Calcd. for C19H18FN5O4S2:C, 49.24%; H, 3.91%; F, 4.10%; N, 15.11%; S, 13.84%. Found: C, 49.50%; H, 3.60%; F, 4.50%; N, 15.40%; S, 13.80%.

N-(2,6-Dimethoxy-pyrimidin-4-yl)-4-[3-(4-fluoro-phenyl)-thioureido]benzenesul-fonamide (3c)

This compound was obtained as brown crystals from ethanol; yield 90%; m.p. > 360 °C. IR: 3442, 3186 (NH), 3062 (arom.), 2941, 2839 (aliph.), 1624 (CN), 1382, 1132 (SO2), 1271 (CS). 1H-NMR: δ 3.72, 3.75 [2 s, 6H, 2OCH3], 6.4 [s, 1H, H- pyrimidine], 6.9–8.8 [m, 8H, Ar–H], 9.7 [s, 1H, SO2NH], 11.4 [s, 2H, 2NH]. 13C-NMR: δ 55.4, 55.7, 84.1, 113.6 (2), 121.0 (2), 127.5 (2), 129.6 (2), 132.7, 133.8, 140.0, 158.6, 161.9, 165.8, 170.9, 182.3. Anal. Calcd. For C19H18FN5O4S2:C, 49.24%; H, 3.91%; F, 4.10%; N, 15.11%; S, 13.84%. Found: C, 49.10%; H, 3.80%; N, 15.30%; S, 13.70%.

N-(2,6-Dimethoxy-pyrimidin-4-yl)-4-[3-(3-fluoro-4-methoxy-phenyl)-thioureido]benzenesulfonamide (3d)

This compound was obtained as yellow crystals from ethanol; yield 88%; m.p. 289 °C. IR: 3421, 3230 (NH), 3086 (arom.), 2910, 2841 (aliph.), 1624 (CN), 1400, 1128 (SO2), 1286 (CS). 1H-NMR: δ 3.84, 3.91, 3.96 [3 s, 9H, 3OCH3], 6.4 [s, 1H, H-pyrimidine], 6.9–8.4 [m, 7H, Ar–H], 8.9 [s, 1H, SO2NH], 11.5 [s, 2H, 2NH];13C-NMR:δ 55.4, 55.6, 57.4, 79.6, 117.3 (2), 121.7 (2), 122.0, 129.7(2), 130.1, 134.7, 139.8, 140.9, 150.8, 160.2, 162.9, 172.0, −183.3. Anal. Calcd. For C20H20FN5O5S2:C, 48.67%; H, 4.08%; F, 3.85%; N, 14.19%; O, 16.21%; S, 12.99%. Found: C, 48.50%; H, 4.10%; F, 3.30%; N, 14.20%; S, 12.70%.

N-(2,6-Dimethoxy-pyrimidin-4-yl)-4-[3-(4-fluoro-2-nitro-phenyl)-thioureido]benzenesulfonamide (3e)

This compound was obtained as yellow crystals from ethanol; yield 86%; m.p. 143.5 °C. IR: 3421, 3197 (NH), 3062 (arom.), 2936, 2839 (aliph.), 1625 (CN), 1384, 1132 (SO2), 1269 (CS). 1H-NMR: δ3.80, 3.84 [2 s, 6H, 2OCH3], 6.5 [s, 1H, H-pyrimidine], 6.9–8.4 [m, 7H, Ar–H], 9.8 [s, 1H, SO2NH], 10.4, 11.0 [2 s, 2H, 2NH]. 13C-NMR: 55.4, 56.5, 79.8, 112.7, 121.4, 125.5 (2), 127.8 (2), 128.1 (2), 133.6, 144.0, 144.9, 153.1, 155.3, 165.7, 170.2, 178.8. Anal. Calcd. For C19H19FN6O6S2: C, 44.70%; H, 3.75%; F, 3.72%; N, 16.46%; S, 12.56%. Found: C, 44.60%; H, 3.50%; F, 3.70%; N, 16.40%; S, 12. 60%.

N-(2,6-Dimethoxy-pyrimidin-4-yl)-4-[3-(2,3,5,6-tetrafluoro-pyridin-4-yl)-thioureido]benzenesulfonamide (4a)

This compound was obtained as brown crystals from ethanol; yield 87%; m.p. 281.7 °C.IR: 3400, 3192 (NH), 3057 (arom.), 2931, 2871 (aliph.), 1620 (CN), 1386, 1128 (SO2), 1257 (CS). 1H-NMR:δ 3.80, 3.84 [2 s, 6H, 2OCH3], 6.1 [s, 1H, H-pyrimidine], 6.7–8.2 [m, 4H, Ar–H],10.3 [s, 1H, SO2NH], 11.7 [s, 2H, 2NH]; 13C-NMR: δ 55.4, 55.6, 81.2, 121.8 (2),128.7 (2), 130.2(2), 137.1, 140.8, 143.0, 144.5 (2), 161.4, 161.9, 169.7, 184.6. Anal. Calcd. For C18H14F4N6O4S2:C, 41.60%; H, 2.42%; F, 14.60%; N, 16.30%; S, 12.40%. Found: C, 41.60%; H, 2.42%; F, 14.60%; N, 16.30%; S, 12.40%.

N-(2,6-Dimethoxy-pyrimidin-4-yl)-4-[3-(5-trifluoromethyl-[1, 3, 4]thiadiazol-2-yl)-thioureido]-benzenesulfonamide (4b)

This compound was obtained as brown crystals from ethanol; yield 86%; m.p. 276.7 °C. IR: 3400, 3201(NH), 3045 (arom.), 2923, 2801 (aliph.), 1622 (CN),1386,1130 (SO2),1323 (CS). 1H-NMR: δ 3.80, 3.81 [2 s, 6H, 2OCH3], 6.1 [s, 1H, H-pyrimidine],6.9–8.4 [m, 4H, Ar–H], 10.1 [s, 1H, SO2NH], 10.3, 12.0 [2 s,2H, 2NH]; 13C-NMR: 56.2, 56.7, 81.6, 117.2, 120.8 (2), 130.7 (2), 134.6, 143.0, 151.1, 154.6, 161.7, 163.9, 173.0, 182.8. Anal. Calcd. for C16H14F3N7O4S3:C, 36.85%; H, 2.71%; F, 10.93%; N, 18.80%; S, 18.45%. Found: C, 36.70%; H, 2.90%; F, 10.70%; N, 18.90%; S, 18.90%.

N-(2,6-Dimethoxy-pyrimidin-4-yl)-4-[3-(6-fluoro-benzothiazol-2-yl)-thioureido]-benzenesulfonamide (4c)

This compound was obtained as brown crystals from ethanol; yield 92%; m.p.179.7 °C. IR: 3415, 3310 (NH), 3075 (arom.), 2978, 2841 (aliph.), 618 (CN), 1311, 1195 (SO2),1274 (CS).1H-NMR: δ 3.64, 3.66 [2 s, 6H, 2OCH3], 6.5 [s, 1H, H-pyrimidine], 6.9–8.5 [m, 7H, Ar–H],9.7[s,1H, SO2NH],11.8, 12.4 [2 s, 2H, 2NH].13C-NMR: 55.4, 55.8, 83.7, 109.1, 112.0, 119.2, 123.7 (2), 128.1 (2), 132.8, 134.2, 139.9, 147.1, 156.6, 157.1, 165.3, 174.0, 175.1, 183.2. Anal. Calcd. for C20H17FN6O4S3: C, 46.14%; H, 3.29%; F, 3.65%; N, 16.14%; S, 18.48%. Found: C, 46.20%; H, 3.40%; F, 3.60%; N, 16.30%; S, 18.48%.

N-(2,6-Dimethoxy-pyrimidin-4-yl)-4-[3-(4-trifluoromethyl-2-oxo-2H-chromen-7-yl)-thioureido]-benzenesulfonamide (4d)

This compound was obtained as brown crystals from ethanol; yield 81%; m.p.209.7 °C. IR: 3454, 3361, 3250 (NH), 3100 (arom.), 2970, 2861 (aliph.), 1708 (CO), 1635 (CN),1350,1165 (SO2), 1286 (CS). 1H-NMR: 3.80, 3.82 [2 s, 6H, 2OCH3], 6.3 [s, 1H, H -pyrimidine], 6.8–8.0 [m, 8H, Ar–H + H -chromene], 9.8 [s, 1H, SO2NH], 11.4 [s,2H, 2NH]; 13C-NMR: 55.4, 55.6, 80.6, 107.2, 112.6 (2), 121.3 (2), 126.1 (3), 129.0 (2), 133.0 (2), 140.5, 154.5 (2), 157.0, 159.8, 165.2, 174.6, 180.3. Anal. Calcd. for C23H18F3N5O6S2: C, 47.50%; H, 3.12%; F, 9.80%; N, 12.04%; S, 11.03%. Found:C, 47.70%; H, 3.50%; F, 9.70%; N, 12.30%; S, 11.20%.

Antimicrobial activity assay

All microbial strains were provided from culture collection of the Regional Center for Mycology and Biotechnology (RCMB), Al-Azhar University, Cairo, Egypt. The antimicrobial activity was investigated on a dozen of newly synthesized compounds in order to increase the selectivity of these derivatives towards test microorganisms using well diffusion method [42]. Briefly, 100 μL of the test bacteria/fungi were grown in 10 mL of fresh media until they reached a count of approximately 108 cells/mL for bacteria or 105 cells/mL for fungi. One hundred µL of each sample (at 1 mg/mL) was added to each well (10 mm diameter holes cut in the agar gel). The plates were incubated for 24–48 h at 37 °C (for bacteria and yeast) and for 48 h at 28 °C (for filamentous fungi). After incubation, the microorganism’s growth was observed. Ampicillin and gentamycin were used as standard antibacterial drugs while amphotricin B was used as standard antifungal drug. The resulting inhibition zone diameters were measured in millimeters and used as criterion for the antimicrobial activity. If an organism is placed on the agar it will not grow in the area around the well if it is susceptible to the chemical. This area of no growth around the disc is known as a zone of inhibition. The size of the clear zone is proportional to the inhibitory action of the compound under investigation. Solvent controls (DMSO) were included in every experiment as negative controls. DMSO was used for dissolving the tested compounds and showed no inhibition zones, confirming that it has no influence on growth of the tested microorganisms. The active compounds were further investigated to determine their antimicrobial activity expressed in terms of minimum inhibitory concentration (MIC) using the modified agar well diffusion method that mentioned above. Concentrations between 0.1 and 1000 µg/mL of each active compound were tested and compared with standard drugs. The MIC was then determined as the lowest concentration inhibiting growth of the organism after 24–48 h.

Antitumor activity assay

The tested human carcinoma cell lines were obtained from the American Type Culture Collection (ATCC, Rockville, MD). The cells were grown on RPMI-1640 medium supplemented with 10% inactivated fetal calf serum and 50 µg/mL gentamycin. The cells were maintained at 37 °C in a humidified atmosphere with 5% CO2 and were sub-cultured two to three times a week.

For antitumor assays, the tumor cell lines were suspended in medium at cell density of 5 × 104 cells/well in Corning® 96-well tissue culture plates, then incubated for 24 h. The tested compounds were then added into 96-well plates (six replicates) to achieve eight concentrations for each compound. Six vehicle controls with media or 0.5% DMSO were run for each 96 well plate as a control. After incubating for 24 h, the numbers of viable cells were determined by the MTT assay [43, 44]. Briefly, the media was removed from the 96-well plate and replaced with 100 µL of fresh culture RPMI 1640 medium without phenol red then 10 µL of the 12 mM MTT stock solution (5 mg of MTT in 1 mL of PBS) to each well including the untreated controls. The 96 well plates were then incubated at 37 °C and 5% CO2 for 4 h. An 85 µL aliquot of the media was removed from the wells, and 50 µL of DMSO was added to each well and mixed thoroughly with the pipette and incubated at 37 °C for 10 min. Then, the optical density was measured at 590 nm with the microplate reader (SunRise, TECAN, Inc, USA) to determine the number of viable cells and the percentage of viability was calculated as [1−(ODt/ODc)] × 100% where ODt is the mean optical density of wells treated with the tested sample and ODc is the mean optical density of untreated cells. The relation between surviving cells and drug concentration is plotted to get the survival curve of each tumor cell line after treatment with the specified compound. The 50% inhibitory concentration (IC50), the concentration required to cause toxic effects in 50% of intact cells, was estimated from graphic plots of the dose response curve for each conc. using Graphpad Prism software (San Diego, CA, USA) [31].

Molecular docking

All the molecular modeling studies were carried out on an Intel Pentium 1.6 GHz processor, 512 MB memory with Windows XP operating system using Molecular Operating Environment (MOE, 10.2008) software. All the minimizations were performed with MOE until a RMSD gradient of 0.05 kcal mol−1 Å−1 with MMFF94X force field and the partial charges were automatically calculated. The protein data bank file (PDB:3WI6) was selected for this purpose. The file contains MK-2 enzyme Co-crystalized with a ligand obtained from protein data bank. The enzyme was prepared for docking studies where: (i) Ligand molecule was removed from the enzyme active site. (ii) Hydrogen atoms were added to the structure with their standard geometry. (iii) MOE Alpha Site Finder was used for the active sites search in the enzyme structure and dummy atoms were created from the obtained alpha spheres. (iv) The obtained model was then used in predicting the ligand enzymes interactions at the active site.