Abstract
Background
Mushroom showed pellet, clump and/or filamentous mycelial morphologies during submerged fermentation. Addition of microparticles including Talc (magnesium silicate), aluminum oxide and titanium oxide could control mycelial morphologies to improve mycelia growth and secondary metabolites production. Here, effect of microparticle Talc (45 μm) addition on the mycelial morphology, fermentation performance, monosaccharide compositions of polysaccharides and enzymes activities associated with polysaccharide synthesis in G. frondosa was well investigated to find a clue of the relationship between polysaccharide biosynthesis and morphological changes.
Results
Addition of Talc decreased the diameter of the pellets and increased the percentage of S-fraction mycelia. Talc gave the maximum mycelial biomass of 19.25 g/L and exo-polysaccharide of 3.12 g/L at 6.0 g/L of Talc, and mycelial polysaccharide of 0.24 g/g at 3.0 g/L of Talc. Talc altered the monosaccharide compositions/percentages in G. frondosa mycelial polysaccharide with highest mannose percentage of 62.76 % and lowest glucose percentage of 15.22 % followed with the corresponding changes of polysaccharide-synthesis associated enzymes including lowest UDP-glucose pyrophosphorylase (UGP) activity of 91.18 mU/mg and highest UDP-glucose dehydrogenase (UGDG) and GDP-mannose pyrophosphorylase (GMPPB) activities of 81.45 mU/mg and 93.15 mU/mg.
Conclusion
Our findings revealed that the presence of Talc significantly changed the polysaccharide production and sugar compositions/percentages in mycelial and exo-polysaccharides by affecting mycelial morphology and polysaccharide-biosynthesis related enzymes activities of G. frondosa.
Similar content being viewed by others
Explore related subjects
Find the latest articles, discoveries, and news in related topics.Background
Mushrooms provide tasty and nutritional benefits with the expanded usage to pharmaceutical and cosmeceutical areas [1, 2]. Mushroom polysaccharides are regarded as the biological macromolecules with immunomodulatory, antitumor, anti-inflammatory and hypoglycemic, and hepatoprotective activities [3]. Generally, mushroom polysaccharides are prepared from the fruiting bodies, mycelia and/or submerged fermentation broth [4,5,6]. In most cases, mushroom fruiting bodies grow on the solid substrates including crop by-products such as cottonseed hulls [7] and corn distiller’s waste [8, 9] for 2–4 month cultivation. Mycelia or fermentation broth is a promising alternative to meet the increasing demand on the commercial mushroom products with shorter culture period, consistent product quality and independent of seasonality [10, 11].
Similar to filamentous microorganisms, the mushroom mycelia showed pellet, clump and/or filamentous morphologies during fermentation [12, 13]. The strain physiology, culture conditions and process parameters changed morphological appearances, which further influenced the fermentation performance including nutrient consumption, oxygen uptake rate, mycelia growth and metabolites production [14]. For example, the medicinal mushroom Ganoderma lucidum had a twofold increase of the maximum biomass productivity with the dispersed morphology under controlled DO conditions [15]. Our previous data also revealed that high aeration (0.75–1.0 vvm) and low agitation (90 rpm) resulted in filamentous hyphae and small pellets and yielded high mycelia biomass and polysaccharide production [16].
Recently, morphology engineering strategies including targeted metabolic engineering, osmolality or operational parameter optimization have been proposed to control filamentous shape and bioprocess performance [12, 17]. Microparticle-enhanced cultivation (MPEC) such as Talc (magnesium silicate), aluminum oxide and titanium oxide was regarded as one of morphology engineering strategies to control fungal morphology development to improve productivity by preventing bulk fungal growth and providing homogenized fermentation broth [18]. For example, addition of aluminum oxide and hydrous magnesium silicate caused a dispersion of Caldariomyces fumago cells up to a level of single hyphae and a fivefold enhanced chloroperoxidase (CPO) production [19]. Additionally, silicate precisely adjusted the morphology of A. niger to a number of different distinct morphological forms [20] and Talc also led to a 50.30% increase of 3-poly-l-lysine production in Streptomyces sp. M-Z18 fed-batch fermentation [14].
Grifola frondosa is a well-known edible mushroom belonging to the order Aphyllopherales and family Polyporeceae. G. frondosa polysaccharides have recently attracted considerable attention for its physiological activities such as anti-tumor, hypoglycemic and immuno-stimulating properties [4, 21,22,23]. Our previous studies have well investigated the fermentation process optimization to maximally produce G. frondosa mycelia and mycelial/exo-polysaccharide, and elucidated the structure of mycelial polysaccharide and its antitumor mechanism [16, 21, 24]. However, relationships between fermentation conditions, mycelial growth, and polysaccharide biosynthesis need still to be further elucidated. Currently no references of microparticle-enhanced morphology engineering strategies are available to control fungal morphology and improve mycelial growth and polysaccharide biosynthesis of G. frondosa. Therefore, based on our previous results, the present study aimed to investigate effect of microparticle Talc addition on the mycelial growth and polysaccharide production of G. frondosa, and find a clue of the relationship between polysaccharide biosynthesis and morphological changes.
Methods
Microorganism and medium
Grifola frondosa GF 9801 was obtained and kept in our laboratory [24]. The strain was maintained on potato dextrose agar (PDA) after incubation at 28 °C for 7 days, stored at 4 °C and subsequently subcultured every 2 months. The seed culture was grown in a 250 mL Erlenmeyer flask containing 75 mL of the medium (glucose 20 g/L, peptone 5 g/L, KH2PO4 1.5 g/L, and MgSO4·7H2O 0.75 g/L) at 28 °C in a shake incubator at 150 rpm for 6 days. Media for 500-mL flask fermentation with 150 mL of working volume contained glucose 60 g/L, peptone 6 g/L, KH2PO4 3 g/L and MgSO4·7H2O 1.5 g/L.
Inoculum preparation and shake-flask fermentation
Grifola frondosa was initially cultivated on PDA at 28 °C for 7 days. 10 pieces (approximately 5 × 5 mm) of the culture was transferred to the seed medium with a sterilized self-designed cutter.
To investigate the effect of Talc (3MgO·4SiO2·H2O, 45 μm) on the fermentation performance of G. frondosa, Talc with the concentrations of 0, 0.1, 0.5, 1.0, 3.0, 6.0, 10.0, 15.0, and 20.0 g/L was added in the 150 mL fermentation media in the 500-mL shake flasks after inoculating with 10% (v/v) of the seed. The fermentation tests were conducted at 28 °C with shaking at 150 rpm for 6 days. After removing Talc with 300 micron-size nylon mesh, the samples were collected from each flask for analyzing mycelial morphology, mycelial biomass and exo-polysaccharide concentrations, and polysaccharides compositions and enzymes activities related to polysaccharide-synthesis in G. frondosa.
Morphological characterization
The microscopic analyses of G. frondosa mycelia were conducted by adding 3 mL of the culture broth into a Petri containing 10 mL of distilled water and capturing the images with a digital camera (Olympus Optical Co., Ltd., Tokyo, Japan) mounted on the stereomicroscope (Olympus Optical Co., Ltd., Tokyo, Japan). Morphological measurements were carried out using the Image-Pro Plus 6.0 software (Media Cybernetics Inc., MD, USA). The morphologies of 20 pellets in each sample were characterized by measuring the area, perimeter, equivalent diameter, circularity, and roughness [25]. Equivalent diameter is the diameter of a circle having the same area with the measured feature. It is derived from area (A) as \({\text{D}} = \sqrt {4{\text{A/}}\pi }\). According to the equivalent diameter, the mycelial pellet were divided into L-fraction (diameter ≥ 1.5 cm), M-fraction (diameter between 0.5 with 1.5 cm) and S-fraction (diameter < 0.5 cm). The circularity was estimated as the ratio of the Feret’s minimum diameter to the Feret’s maximum diameter of the pellets or aggregates. Roughness (R) was measured using the following equation: R = (pellet aggregate perimeter)2/(4π × pellet area).
Fermentation performance
Fermentation performance of G. frondosa was evaluated based on concentrations of mycelia biomass and exo-polysaccharide. Grifola frondosa mycelia concentration was measured by centrifuging the collected broth at 10,000×g for 10 min and freeze-drying the precipitated mycelia after three-time distilled water wash. Exo-polysaccharide concentration was weighted by mixing the resulting broth vigorously with four times volume of ethanol (100%, v/v), centrifuging to obtain the precipitate at 12,000×g for 20 min and freeze-drying.
Mycelial polysaccharide was obtained by collecting the cultured mycelia by centrifugation at 10,000×g for 10 min, extracting the mycelia at 90 °C for 2 h, precipitating the extracts with four times volume of ethanol (100%, v/v) for 24 h at 4 °C, freeze-drying and weighting the precipitates. The mycelial polysaccharide yield was calculated by dividing the mycelial polysaccharide (g) by the freeze-dried mycelial biomass (g).
Monosaccharide composition analysis of mycelial polysaccharide and exo-polysaccharide
Monosaccharide compositions and their ratios in mycelial polysaccharide and exo-polysaccharide were determined by absolute hydrolysis [26]. Briefly, Mycelial polysaccharide and exo-polysaccharide were hydrolyzed with 0.3 mL 72% (w/v) sulphuric acid for 30 min at 30 °C, followed with addition of 8.4 mL of distilled water and incubation at 121 °C for 1 h. The hydrolysate was neutralized with CaCO3, evaporated to dryness, and acetylated with Ac2O-Pyridine at 90 °C for 30 min. Inositol was used as an internal standard. The resulting alditol acetate was analyzed by gas chromatography using an Agilent Technologies 7890A Network gas chromatography using HP-5MS capillary column (30 m × 0.25 mm i.d.) (Hewlett-Packard, Avondale, PA, USA) with nitrogen as carrier gas. The analysis was carried out with the temperature from 130 to 240 °C at 4 °C/min and maintaining the temperature for 5 min. Samples (1 μL) were injected in the split mode at the ratio of 40:1. The products were identified by typical retention times of corresponding standards.
Determination of PGI, UGP, UGDG, GMPPB and UGE activities associated with polysaccharide-synthesis
Grifola frondosa mycelia were harvested by centrifugation at 10,000×g, 4 °C for 10 min after 6-day fermentation, washed twice with 20 mM phosphate buffer (pH 6.5) to remove the residual media and talcum. The mycelia were ground after mixing with 20 mM phosphate buffer, and centrifuged at 10,000×g, 4 °C for 10 min to collect the supernatant to determine activities of the polysaccharide-synthesis related enzymes.
Polysaccharide-synthesis related enzymes including PGI (Phosphoglucose isomerase), UGP (UDP-glucose pyrophosphorylase), UGDG (UDP-glucose dehydrogenase), GMPPB (GDP-mannose pyrophosphorylase) and UGE (UDP-glucose-4-epimerase) were determined according to the previously reported method [27, 28] with slight modification. All in vitro enzyme assays were performed at 30 °C in a volume of 250 μL with 220 μL of reagents listed in Table 1, and 30 μL of cell extract. Formation or disappearance of NAD(P)H was monitored by spectrophotometrically measuring the absorbance at 340 nm (ε340 = 6.22/M/cm). The activities of the enzymes described below were expressed in nmol NAD(P)H/(mg protein)/min. The protein content of the extracts was determined using the Bradford method [29] and was compared with a bovine serum albumin standard. The blank for each enzyme was the same reaction condition with cell extract after incubation at 80 °C for 20 min.
Statistical analysis
All experiments were performed in triplicates. The data were expressed as means ± standard deviations (n = 3). Data sets were evaluated by one-way analysis of variance (ANOVA). Statistical comparisons were made on the basis of the p value (α = 0.05) followed by Duncan’s new multiple range test.
Results and discussion
Effect of Talc concentration on the morphology of Grifola frondosa
Morphological forms of fungi and mushrooms vary from dispersed mycelial filaments to dense pellets which affect the amounts of secondary metabolites [30]. Our previous results also proved that G. frondosa mycelia had at least three typical morphological appearances including pellets with a rigid pellet core and hairy region, clumps with low roughness and filaments with uncertain shape and small size [16]. Figure 1 gave the influence of added Talc (average diameter of 45 μm) concentration on G. frondosa morphology during 6-day fermentation. G. frondosa mycelia had the bulky appearance of pellets with radial fluffs when the added Talc concentrations were 0.1–1.0 g/L. Increase of Talc concentration to 6.0–15.0 g/L decreased the rigidity and radial fluffs of mycelia and led to spherical and smooth pellets, even looser hyphal fragments. Mycelia of G. frondosa had the smallest size and free hypha at the Talc concentration of 20.0 g/L.
Changes of mycelial size and its distribution during submerged culture by G. frondosa under different Talc concentrations were shown in Fig. 2. Majority of G. frondosa mycelia without Talc addition belonged to L (diameter of mycelia pellet ≥ 1.5 cm) or M-fraction (diameter of mycelia pellet ranging from 0.5 to 1.5 cm) with the ratios of 45.2 and 49.7%, respectively. The increase of Talc concentration to 20.0 g/L resulted in the significant decrease of L fraction ratio to approximately 4.12%. M-fraction ratio reached to maximum level of 58.12% when added Talc concentration of 3.0 g/L, and then gradually decreased to 20.65% with the increased Talc concentration to 20.0 g/L. Accordingly, the S-fraction (diameter of mycelia pellet < 0.5 cm) became to the majority with the maximum level of 75.41% at Talc concentration of 20.0 g/L. The present study indicated that addition of Talc also could decrease the diameters of G. frondosa mycelia for controlling homogeneous pellet size, which possibly due to the collision between Talc with mycelia, the shear stress exerted by the Talc and the dissociation of mycelium gathering [19]. Similar results could be found in the decrease of Streptomyces sp. mycelial diameter from 297.63 to 205.65 μm with supplementation of 10.0 g/L Talc [14].
Changes of mycelial forms during submerged culture by G. frondosa under different Talc concentrations ranging from 0.1g/L to 20.0g/L during the 6-day fermentation period at 28 °C. (Frequency (%) = mycelia pellet No. of fraction/ total mycelia pellets× 100%; l-fraction: diameter of mycelia pellet≥1.5 cm, M-fraction: diameter of mycelia pellet ranging from 0.5 cm to 1.5 cm, S-fraction: diameter of mycelia pellet <0.5 cm)
Table 2 summarized the morphological parameters of G. frondosa S-fraction mycelia with Talc concentrations up to 20.0 g/L after 6-day fermentation. Addition of Talc with concentration of 20.0 g/L resulted in the minimum area, perimeter and equivalent diameter of 0.49 mm2, 4.11 and 0.79 mm, respectively, which also proved that the high Talc concentration were negative to the pellet formation. Our previous results showed that supplementation of 20.0 g/L microparticle Al2O3 decreased the area, perimeter and equivalent diameter of G. frondosa mycelia to 1.07 mm2, 6.65 and 1.17 mm [31]. Talc concentration of 3.0 g/L gave the maximum roughness of 4.86. From Table 2, Talc concentration of 0.1–15.0 g/L had a slight influence on the circularity from 0.73 to 0.81 (p > 0.05).
Effect of Talc concentration on fermentation performance of Grifola frondosa
Figure 3 showed the influence of Talc concentration on the fermentation performance of G. frondosa. Mycelia growth of G. frondosa showed an increasing trend with the increase of Talc concentrations from 0.1 to 6.0 g/L. Talc concentration of 6.0 g/L gave the maximum mycelia biomass of to 19.25 g/L with 55.0% increase to that of control. Too high concentration of Talc had the negative influence on the mycelial biomass with the minimum biomass concentration of 13.20 g/L when Talc concentration increased to 20 g/L. This finding contradicted the cultivations of Aspergillus terreus ATCC 20542 with highest biomass concentration at 10–15 g/L Talc [32] and Streptomyces sp. M-Z18 with maximum DCW of 7.05 g/L in shake-flask fermentation at 20 g L/L of Talc addition [14].
Exo-polysaccharide production increased to the maximum level of 3.12 g/L when the added Talc concentration increased to 6.0 g/L, and then decreased to 1.48 g/L at the Talc concentration of 20 g/L. Mycelia polysaccharide showed the highest yield of 0.24 g/g at Talc concentration of 3.0 g/L, and lowest yield of 0.05 g/g with addition of 20.0 g/L of Talc, which might contribute to the higher ratios of M- and S-mycelial fractions benefiting the heat and mass transfer. Similarly, Driouch et al. found that 10 g/L of Talc increased the 4 times of glucoamylase (GA) activity [33], and Ren et al. also found that Talc with concentration of over 10 g/L would lower the target ε-poly-l-lysine production [14]. Hence, it could be concluded that addition of 3.0–6.0 g/L of Talc would be beneficial for exo-polysaccharide and mycelia polysaccharide production of G. frondosa.
Effect of Talc addition on monosaccharide compositions/percentages and polysaccharide synthesis related enzymes of Grifola frondosa
Tables 3 and 4 presented the changes of monosaccharide compositions and their ratios in the exo-polysaccharide and mycelial polysaccharides of G. frondosa without or with Talc. Similar to our previous obtained results, exo-polysaccharides in the control samples were mainly composed of glucose (98.25%) with minor amounts of mannose (0.89%) and arabinose (0.86%) (Table 3). Presence of Talc possibly shifted sugar compositions in the exo-polysaccharide of G. frondosa. After adding Talc microparticles with the increasing concentrations to 6.0 g/L, percentages of glucose decreased to the lowest level of 77.96% while arabinose percentage increased ranging from 2.79 to 5.43%. Interestingly, galactose appeared and reached to the highest percentage of 16.77% with adding 6.0 g/L of Talc.
From Table 4, Talc also significantly altered the monosaccharide compositions in mycelial polysaccharide by decreasing glucose percentage to 15.22% (6.0 g/L of Talc), and increasing galactose percentage to 31.9% (20.0 g/L of Talc) and mannose percentage to 62.76% (6.0 g/L of Talc), respectively. The previous data also proved that the aeration rate of 0.50 vvm caused the sugar metabolic shift with the lowest arabinose percentage of 2.83% and highest mannose percentage of 35.73% [16]. Similar conclusion also has been obtained that the varied dissolved oxygen concentration resulted in the metabolic shifts in Yarrowia lipolytica by affecting the morphological characteristics and enzymes activity such as ATP-citrate lyase in lipid biosynthesis [34].
Compared to the bacterial polysaccharides [35, 36], the knowledge about pathways and molecular mechanisms of fungal polysaccharide synthesis is still limited. Some pathways of fungal polysaccharides biosynthesis are proposed based on the monosaccharide compositions and activities polysaccharide-synthesis associated enzymes using the synthesis pathways of bacterial polysaccharide as a Ref. [27]. Based on the changes of monosaccharide compositions/percentages in exo-polysaccharide and mycelial polysaccharide of G. frondosa, the activities of five key enzymes including UGDG, PGI, UGP, GMPPB and UGE possibly involved in the polysaccharides biosynthesis were determined after 6-day fermentation and shown in Table 5. UGP and UGDG play the key roles on UDP-glucose and UDP-arabinose synthesis [37, 38]. From Table 5, UGP had the lowest activity of 91.0 mU/mg while UGDG showed the highest activity of 81.0 mU/mg with Talc concentration of 6.0 g/L, which were in accordance with the trends of glucose and arabinose percentages. GMPPB is the sole enzymes to produce GDP-mannose [39]. With the increased concentration of Talc to 6.0 g/L, GMPPB activity increased to the maximum level of 93.0 mU/mg with the corresponding mannose percentage of 62.76% in mycelial polysaccharide and 2.05% in exo-polysaccharide. UGE catalyzes the interconversion between UDP-glucose and UDP-galactose [40]. From Table 5, UGE activity showed the significant changes to 165 mU/mg with the increase of galactose percentage to 31.19% in mycelial polysaccharide.
From the above results, the possible polysaccharide synthesis pathway in G. frondosa could be proposed as follows. Exo-polysaccharide of G. frondosa was synthesized by converting glucose to UDP-glucose with UGP and polymerizing UDP-glucose to glucan with glucan synthases, and finally secreted to the broth. Simultaneously, glucose in G. frondosa cells was fermented to UDP-glucose, UDP-galactose and GDP-mannose using PGI, UGE, UGDG and GMPPB which were assembled to mycelial polysaccharides. Addition of Talc affected morphological appearance of G. frondosa by changing shear stress and accelerated the collision between talc with mycelia, which increased contact area with the dissolved oxygen and nutrients, altered the expression of polysaccharide synthesis related enzymes and finally changed the monosaccharide compositions in mycelial polysaccharides and exo-polysaccharide.
Conclusion
In order to improve mycelial growth and polysaccharide production by G. frondosa, selection of microparticle Talc concentration was of highest importance. Adding Talc (45 μm) with the concentration of 3.0–6.0 g/L decreased the diameter of the pellets and increased the percentage of S-fraction mycelia of G. frondosa. Talc gave the maximum mycelial biomass of 19.25 g/L and exo-polysaccharide of 3.12 g/L at 6.0 g/L of Talc and mycelial polysaccharide of 0.24 g/g at 3.0 g/L of Talc. The presence of Talc significantly affected the monosaccharide compositions and percentages in mycelial and exo-polysaccharides, and enzymes activities associated with polysaccharide synthesis. The results suggested that addition of Talc would change the fermentation performance by affecting morphological appearance and polysaccharide-biosynthesis related enzymes activities of G. frondosa. Further investigations to construct the G. frondosa mutants by over-expressing and/or gene-silencing the genes involved mycelial and exo-polysaccharide synthesis are ongoing in our lab to enhance the production of targeted polysaccharides.
References
Rathore H, Prasad S, Sharma S. Mushroom nutraceuticals for improved nutrition and better human health: a review. PharmaNutrition. 2017;5(2):35–46.
Wang XM, Zhang J, Wu LH, Zhao YL, Li T, Li JQ, Wang YZ, Liu HG. A mini-review of chemical composition and nutritional value of edible wild-grown mushroom from China. Food Chem. 2014;151(15):279–85.
Taofiq O, Martins A, Barreiro MF, Ferreira ICFR. Anti-inflammatory potential of mushroom extracts and isolated metabolites. Trends Food Sci Tech. 2016;50:193–210.
Li Q, Wang W, Zhu Y, Chen Y, Zhang WJ, Yu P, Mao GH, Zhao T, Feng WW, Yang LQ, Wu XY. Structural elucidation and antioxidant activity a novel Se-polysaccharide from Se-enriched Grifola frondosa. Carbohydr Polym. 2017;161(1):42–52.
Sharma SK, Gautam N. Chemical composition and antioxidant and antibacterial activities of cultured mycelia of four clavicipitaceous mushrooms (Ascomycetes) from the Indian Himalayas. Int J Med Mushrooms. 2017;19(1):45–54.
Chen L, Cheng WN, Zhang BB, Cheung PCK. Structural and thermal analysis of a hyper-branched exopolysaccharide produced by submerged fermentation of mushroom mycelium. RSC Adv. 2016;6(113):112260–8.
Li HZ, Zhang ZJ, Li MX, Li XJ, Sun ZW. Yield, size, nutritional value, and antioxidant activity of oyster mushrooms grown on perilla stalks. Saudi J Biol Sci. 2017;24(2):347–54.
Estrada AER, Jimenez-Gasco MM, Royse DJ. Improvement of yield of Pleurotus eryngii var. eryngii by substrate supplementation and use of a casing overlay. Bioresour Technol. 2009;100:5270–6.
Ryu JS, Kim MK, Im CH, Shin PG. Development of cultivation media for extending the shelf-life and improving yield of king oyster mushrooms (Pleurotus eryngii). Sci Hortic. 2015;193(22):121–6.
Liu XL, Zheng XQ, Qian PZ, Kopparapu NK, Deng YP, Nonaka M, Harada N. Purification and characterization of a novel fibrinolytic enzyme from culture supernatant of Pleurotus ostreatus. J Microbiol Biotechnol. 2014;24:245–53.
Zhang BZ, Inngjerdingen KT, Zou YF, Rise F, Michaelsen TE, Yan PS, Paulsen BS. Characterisation and immunomodulating activities of exo-polysaccharides from submerged cultivation of Hypsizigus marmoreus. Food Chem. 2014;163:120–8.
Krull R, Wucherpfennig T, Esfandabadi ME, Walisko R, Melzer G, Hempel DC, Kampen I, Kwade A, Wittmann C. Characterization and control of fungal morphology for improved production performance in biotechnology. J Biotechnol. 2013;163:112–23.
Vetchinkina E, Kupryashina M, Gorshkov V, Ageeva M, Gogolev Y, Nikitina V. Alteration in the ultrastructural morphology of mycelial hyphae and the dynamics of transcriptional activity of lytic enzyme genes during basidiomycete morphogenesis. J Microbiol. 2017;55(4):280–8.
Ren XD, Xu YJ, Zeng X, Chen XS, Tang L, Mao ZG. Microparticle-enhanced production of ε-poly-l-lysine in fed-batch fermentation. RSC Adv. 2015;5:82138–43.
Fazenda ML, Harvey LM, McNeil B. Effects of dissolved oxygen on fungal morphology and process rheology during fed-batch processing of Ganoderma lucidum. J Microbiol Biotechnol. 2010;20(4):844–51.
Cui FJ, Chen XX, Liu WM, Sun WJ, Huo SH, Yang Y. Control of Grifola frondosa morphology by agitation and aeration for improving mycelia and exo-polymer production. Appl Biochem Biotech. 2016;179(3):459–73.
Wucherpfennig T, Hestler T, Krull R. Morphology engineering-osmolality and its effect on Aspergillus niger morphology and productivity. Microb Cell Fact. 2011;10:58.
Antecka A, Blatkiewic M, Bizukojc M, Ledakowicz S. Morphology engineering of basidiomycetes for improved laccase biosynthesis. Biotechnol Lett. 2016;38:667–72.
Kaup BA, Ehrich K, Pescheck M, Schrader J. Microparticle-enhanced cultivation of filamentous microorganisms: increased chloroperoxidase formation by Caldariomyces fumago as an example. Biotechnol Bioeng. 2008;99:491–8.
Driouch H, Sommer B, Wittmann C. Morphology engineering of Aspergillus niger for improved enzyme production. Biotechnol Bioeng. 2010;105:1058–68.
Cui FJ, Tao WY, Xu ZH, Guo WJ, Xu HY, Ao ZH, Jin J, Wei YQ. Structural analysis of anti-tumor heteropolysaccharide GFPS1b from the cultured mycelia of Grifola frondosa GF9801. Bioresour Technol. 2007;98:395–401.
Masuda Y, Nakayama Y, Tanaka A, Naito K, Konishi M. Antitumor activity of orally administered maitake α-glucan by stimulating antitumor immune response in murine tumor. PLoS ONE. 2017;12(3):e0173621.
Wu CY, Wu TX. Effect of the main ingredients of Rhizoma gastrodiae on mycelial biomass and exopolysaccharide productions by submerged culture of Grifola frondosa. Int J Food Sci Tech. 2015;50(8):1726–30.
Cui FJ, Li Y, Xu ZH, Xu HY, Sun K, Tao WY. Optimization of the medium composition for production of mycelial biomass andexo-polymer by Grifola frondosa GF9801 using response surface methodology. Bioresour Technol. 2006;97:1209–16.
Riley GL, Tucke KG, Paul GC, Thomas CR. Effect of biomass concentration and mycelial morphology on fermentation broth rheology. Biotechnol Bioeng. 2000;68:160–72.
Sluiter A, Hames B, Ruiz R, Scarlata C, Sluiter J, Templeton D. Determination of structural carbohydrates and lignin in biomass. Lab Analyt Proced. 2008;1617:1–6.
Zhu ZY, Liu XC, Dong FY, Guo MZ, Wang XT, Wang Z, Zhang YM. Influence of fermentation conditions on polysaccharide production and the activities of enzymes involved in the polysaccharide synthesis of Cordyceps militaris. Appl Microbiol Biotechnol. 2016;100:3909–21.
Peng L, Qiao SH, Xu ZH, Guan F, Ding ZY, Gu ZH, Zhang L, Shi GY. Effects of culture conditions on monosaccharide composition of Ganoderma lucidum exopolysaccharide and on activities of related enzymes. Carbohyd Polym. 2015;133:104–9.
Bradford MM. A rapid and sensitive method for the quantitation of microgram quantities of protein utilizing the principle of protein-dye binding. Anal Biochem. 1976;72(1–2):248–54.
Kossen NWF. The morphology of filamentous fungi. Adv Biochem Eng Biotechnol. 2000;70:1–33.
Chen XX, Yang Y, Cui FJ, Sun WJ, Liu WM. Effect of aluminum oxide on Grifola frondosa mycelial biomass, pellet diameter and polysaccharide production. Acta Edible Fungi. 2016;23(1):42–6 (In Chinese).
Gonciarz J, Bizukojc M. Adding talc microparticles to Aspergillus terreus ATCC 20542 preculture decreases fungal pellet size and improves lovastatin production. Eng Life Sci. 2014;14(2):190–200.
Driouch H, Hänsch R, Wucherpfennig T, Krull R, Wittmann C. Improved enzyme production by bio-pellets of Aspergillus niger: targeted morphology engineering using titanate microparticles. Biotechnol Bioeng. 2012;109(2):462–71.
Bellou S, Makri A, Triantaphyllidou IE, Papanikolaou S, Aggelis G. Morphological and metabolic shifts of Yarrowia lipolytica induced by alteration of the dissolved oxygen concentration in the growth environment. Microbiology. 2014;160:807–17.
Rehm BHA. Bacterial polymers: biosynthesis, modifications and applications. Nat Rev Microbiol. 2010;8:578–92.
Yi W, Liu XW, Li YH, Li JJ, Xia CF, Zhou GY, Zhang WP, Zhao W, Chen X, Wang PG. Remodeling bacterial polysaccharides by metabolic pathway engineering. Nat Acad Sci USA. 2009;106(11):4207–12.
Li MJ, Chen TX, Gao T, Miao ZG, Jiang AL, Shi L, Ren A, Zhao MW. UDP-glucose pyrophosphorylase influences polysaccharide synthesis, cell wall components, and hyphal branching in Ganoderma lucidum via regulation of the balance between glucose-1-phosphate and UDP-glucose. Fungal Genet Biol. 2015;82:251–63.
Tenhaken R, Thulke O. Cloning of an enzyme that synthesizes a key nucleotide-sugar precursor of hemicellulose biosynthesis from soybean: UDP-glucose dehydrogenase. Plant Physiol. 1996;112(3):1127–34.
Szumilo T, Drake RR, York JL, Elbein AD. GDP-mannose pyrophosphorylase. Purification to homogeneity, properties, and utilization to prepare photoaffinity analogs. J Biol Chem. 1993;268(24):17943–50.
El-Ganiny AM, Sheoran I, Sanders DA, Kaminskyj SG. Aspergillus nidulans UDP-glucose-4-epimerase UgeA has multiple roles in wall architecture, hyphal morphogenesis, and asexual development. Fungal Genet Biol. 2010;47(7):629–35.
Authors’ contributions
FC conceived of the study and participated in its design and coordination and drafted the manuscript. T-LT and X-XC performed experiments and analyzed results and helped to draft the manuscript. W-JS, D-MH, JZ, YY, DW, and W-ML performed partial experiments and analyzed results. All authors read and approved the final manuscript.
Acknowledgements
Not applicable.
Competing interests
The authors declare that they have no competing interests.
Availability of data and materials
All data generated and materials used in the present study are presented in the paper.
Consent for publication
Not applicable.
Ethics approval and consent to participate
The strain Grifola frondosa GF 9801 was screened by Feng-Jie Cui and kept in our laboratory. The screening process complies with the corresponding guidelines of Jiangnan University.
Funding
This work was supported by funding from Natural Science Foundation of China (31771961), China Scholarship Council (201708320147), Shanghai Agriculture Applied Technology Development Program (2017, No. 9), China Postdoctoral Science special Foundation (2013T60648), Science & Technology Platform Construction Program of Jiangxi Province.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Tao, TL., Cui, FJ., Chen, XX. et al. Improved mycelia and polysaccharide production of Grifola frondosa by controlling morphology with microparticle Talc. Microb Cell Fact 17, 1 (2018). https://doi.org/10.1186/s12934-017-0850-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s12934-017-0850-2