Abstract
Background
Three-dimensional-printed anatomical models (3DPAMs) appear to be a relevant tool due to their educational value and their feasibility. The objectives of this review were to describe and analyse the methods utilised for creating 3DPAMs used in teaching human anatomy and for evaluating its pedagogical contribution.
Methods
An electronic search was conducted on PubMed using the following terms: education, school, learning, teaching, learn, teach, educational, three-dimensional, 3D, 3-dimensional, printing, printed, print, anatomy, anatomical, anatomically, and anatomic. Data retrieved included study characteristics, model design, morphological evaluation, educational performance, advantages, and disadvantages.
Results
Of the 68 articles selected, the cephalic region was the most studied (33 articles); 51 articles mentioned bone printing. In 47 articles, the 3DPAM was designed from CT scans. Five printing processes were listed. Plastic and its derivatives were used in 48 studies. The cost per design ranged from 1.25 USD to 2800 USD. Thirty-seven studies compared 3DPAM to a reference model. Thirty-three articles investigated educational performance. The main advantages were visual and haptic qualities, effectiveness for teaching, reproducibility, customizability and manipulability, time savings, integration of functional anatomy, better mental rotation ability, knowledge retention, and educator/student satisfaction. The main disadvantages were related to the design: consistency, lack of detail or transparency, overly bright colours, long printing time, and high cost.
Conclusion
This systematic review demonstrates that 3DPAMs are feasible at a low cost and effective for teaching anatomy. More realistic models require access to more expensive 3D printing technologies and substantially longer design time, which would greatly increase the overall cost. Choosing an appropriate image acquisition modality is key. From a pedagogical viewpoint, 3DPAMs are effective tools for teaching anatomy, positively impacting the learning outcomes and satisfaction level. The pedagogical effectiveness of 3DPAMs seems to be best when they reproduce complex anatomical areas, and they are used by students early in their medical studies.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Introduction
Practiced since Ancient Greece on animals, cadaver dissection is one of the main methods used to teach anatomy. Cadaveric dissection, carried out during hands-on training, supports the theoretical lessons given to medical students in universities and is currently considered the gold standard for learning anatomy [1,2,3,4,5]. However, there are many obstacles to using human cadaveric specimens, prompting a search for new pedagogical tools [6, 7]. Some of these new tools are extended reality, digital tools, and 3D printing. According to a recent literature review by Santos et al. [8] on the value of these new technologies for teaching anatomy, 3D printing appears to be one of the most relevant resources both in terms of its educational value to students and the feasibility of its implementation [4, 9, 10].
3D printing is not new. The first patents related to this technology date back to 1984: A Le Méhauté, O De Witte and JC André in France and 3 weeks later, C Hull in the USA. Since then, this technology has undergone continuous development, and its use has spread to numerous fields. For example, NASA printed the first object outside the planet Earth in 2014 [11]. The medical field has also appropriated this new tool, thus reinforcing the desire to develop personalized medicine [12].
Many authors have demonstrated the pedagogical benefits of using 3D-printed anatomical models (3DPAM) for medical education [10, 13,14,15,16,17,18,19]. When it comes to teaching human anatomy, non-pathological and anatomically normal models are required. Several reviews have studied pathological models or training models for a medical/surgical procedure [8, 20, 21]. With the intention of developing a hybrid teaching model for human anatomy that incorporates new tools such as 3D printing, we carried out a systematic review to describe and analyse how 3D-printed objects made for teaching of human anatomy are created and how students evaluate the pedagogical contribution of these 3D objects.
Materials and methods
This systematic review of the literature was conducted in June 2022 without time limitation using the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines [22].
Eligibility criteria
Inclusion criteria were all research papers dealing with 3DPAM in anatomy teaching/learning. Literature reviews, letters, or articles studying pathological models, animal models, archaeological models, and medical/surgical training models were excluded. Only articles published in English were selected. Articles without available online abstracts were excluded. Articles dealing with several models – at least one of which was anatomically normal or had trivial pathology that did not alter the pedagogical value – were included.
Search strategy
A literature search was performed in the electronic PubMed database (National Library of Medicine, NCBI) to identify relevant studies published up to June 2022. The following search terms were used: education, school, learning, teaching, learn, teach, educational, three-dimensional, 3D, 3-dimensional, printing, printed, print, anatomy, anatomical, anatomically, and anatomic. A single query was carried out: (((education[Title/Abstract] OR school[Title/Abstract] OR learning[Title/Abstract] OR teaching[Title/Abstract] OR learn[Title/Abstract] OR teach[Title/Abstract] OR educational[Title/Abstract]) AND (three dimensional[Title] OR 3D[Title] OR 3 dimensional[Title])) AND (printing[Title] OR printed[Title] OR print[Title])) AND (anatomy[Title/Abstract] OR anatomical[Title/Abstract] OR anatomically[Title/Abstract] OR anatomic[Title/Abstract]). Additional articles were identified through a manual search in the PubMed database and by looking through the references of other scientific articles. No date restriction was applied but the “human” filter was used.
Study selection
All retrieved titles and abstracts were screened against the inclusion and exclusion criteria by two authors (EBR & AL), and any study that did not meet all the eligibility criteria were excluded. Full-text publications of the remaining studies were obtained and screened by three authors (EBR, EBE & AL). Any disagreement in the selection of articles was resolved, if necessary, by a fourth person (LT). Publications that met all the inclusion criteria were included in this review.
Data extraction
Data extraction was performed independently by two authors (EBR & AL) and supervised by a third (LT).
The extracted data consisted of:
-
- study characteristics: publication date, country of authors, type of study
-
- model design data: anatomical region, specific anatomical part, initial model used for 3D printing, acquisition method, segmentation and modelling software, type of 3D printer, type and number of materials, printing scale, colours, cost of printing
-
- morphological evaluation of the model: model used for comparison, medical evaluation by an expert/teacher, number of raters, type of evaluation
-
- pedagogical performance of the 3D model: student knowledge assessment, assessment methods, number of students, number of comparison groups, randomization of students, type of education/student
-
- advantages and disadvantages.
All data were extracted in predefined forms.
Results
Study selection
Four hundred eighteen studies were identified in the MEDLINE database; 139 articles were excluded by the “human” filter. After the title and abstract were analysed, 103 studies were selected for reading of the full text. Thirty-four articles were excluded because they were either pathological models (9 articles), medical/surgical training models (4 articles), animal models (4 articles), 3D radiology models (1 article) or were not original scientific papers (16 articles). A total of 68 articles were included in this review. Figure 1 summarizes the selection process with a flowchart.
Study characteristics
All studies were published between 2014 and 2022, with the average year of publication being 2019. Of the 68 articles included, 33 (49%) studies were descriptive and experimental, 17 (25%) were purely experimental and 18 (26%) were purely descriptive. Among the 50 (73%) experimental studies, 21 (31%) used randomization. Only 34 studies (50%) included a statistical analysis. Table 1 summarizes the characteristics of each study included.
Model design data
Thirty-three articles (48%) studied the cephalic region, 19 (28%) the thoracic region, 17 (25%) the abdominopelvic region and 15 (22%) the limbs. Fifty-one articles (75%) mentioned 3D printing of bone as an anatomical model or within a multi-slice anatomical model.
Regarding the original model or file used for designing the 3DPAM, 23 articles (34%) mentioned the use of patient data, 20 articles (29%) the use of cadaver data, 17 articles (25%) the use of a database, and 7 studies (10%) did not disclose the origin of the file used.
In 47 studies (69%), the 3DPAMs were designed from CT scans, while 3 studies (4%) specified using micro-CT scans. In 7 articles (10%), the 3D objects were designed from optical scanners, in 4 articles (6%) from MRI and in 1 article (1%) from a camera and microscope. In 14 articles (21%), the origin of the source files for the design of the 3D model was not mentioned. The average spatial resolution was less than 0.5 mm for creating the 3D files. The best resolution was 30 µm [80] and the highest was 1.5 mm [32].
Sixty different software applications (segmentation, modelling, design, or printing) were used. Mimics (Materialise, Leuven, Belgium) was the most used (14 studies, 21%), followed by MeshMixer (Autodesk, San Rafael, CA) (13 studies, 19%), Geomagic (3D System, Morrisville, NC) (10 studies, 15%), 3D Slicer (Slicer Developer Orientation, Boston, MA) (9 studies, 13%), Blender (Blender Foundation, Amsterdam, The Netherlands) (8 studies, 12%) and CURA (Geldermalsen, The Netherlands) (7 studies, 10%).
Sixty-seven different printer models were mentioned with five printing processes. FDM (Fused Deposition Modelling) technology was used in 26 articles (38%), followed by material jetting in 13 articles (19%), then binder jetting (11 articles, 16%). Stereolithography (SLA) (5 articles, 7%) and selective laser sintering (SLS) (4 articles, 6%) were the least used technologies. The most used printer (7 articles, 10%) was the Connex 500 (Stratasys, Rehovot, Israel) [27, 30, 32, 36, 45, 62, 65].
When the material used to fabricate the 3DPAM was specified (51 articles, 75%), plastic and its derivatives were used in 48 (71%) studies. The main materials used were PLA (polylactic acid) (n = 20, 29%), resins (n = 9, 13%) and ABS (acrylonitrile butadiene styrene) (7 articles, 10%). Twenty-three articles (34%) studied 3DPAM made of several materials, 36 (53%) articles featured a 3DPAM made of only one material and 9 (13%) did not specify the material.
Twenty-nine articles (43%) mentioned the printing scale, which ranged from 0.25:1 to 2:1 and averaged 1:1. A 1:1 scale was used in 25 articles (37%). Twenty-eight 3DPAMs (41%) were composed of several colours and 9 (13%) were coloured after printing [43, 46, 49, 54, 58, 59, 65, 69, 75].
Thirty-four articles (50%) mentioned a cost. Nine articles (13%) mentioned the cost of the 3D printer and the raw materials. Printers ranged in price from 302 USD to 65,000 USD. The cost per model, when specified, ranged from 1.25 USD to 2800 USD; these extremes corresponded to a bone specimen [47] and a high-fidelity retroperitoneal model [48]. Table 2 summarizes the model design data for each included study.
Morphological evaluation of 3D models
Thirty-seven studies (54%) compared the 3DAPM to a reference model. Among these studies, the most common comparator was a reference anatomical model, which was used in 14 articles (38%), a plastinated specimen in 6 articles (16%), virtual reality in 6 articles (16%), CT-scan imaging in 5 articles (14%), another 3DPAM in 3 articles (8%), a serious game in 1 article (3%), radiographs in 1 article (3%), a business model in 1 article (3%), and augmented reality in 1 article (3%). Thirty-four (50%) studies rated the 3DPAM. Fifteen (48%) studies specified the raters’ experience (Table 3). The 3DPAM was evaluated by surgeons or attending physicians in 7 studies (47%), anatomy experts in 6 studies (40%), students in 3 studies (20%), teachers (without specifying the discipline) in 3 studies (20%) and another rater in 1 article (7%). The average number of raters was 14 (minimum 2, maximum 30). The morphology of the 3DPAM was evaluated qualitatively in 33 studies (49%) and quantitatively in 10 studies (15%). Among the 33 studies using a qualitative assessment, 16 studies used a purely descriptive assessment (48%), 9 studies used tests/scores/surveys (27%) and 8 studies used a Likert scale (24%). Table 3 summarizes the morphological evaluation of the models in each included study.
Pedagogical performance of 3D models
Thirty-three (48%) articles investigated and compared the pedagogical performance of 3DPAMs in students. Among these studies, 23 (70%) articles evaluated student satisfaction, 17 (51%) used a Likert scale and 6 (18%) used other methods. Twenty-two articles (67%) evaluated student learning through a knowledge check, 10 (30%) of which administered pre- and/or post-tests. Eleven studies (33%) used multiple-choice questions and quizzes to assess students' knowledge and 5 (15%) used image labelling/anatomical identification. An average of 76 students participated per study (minimum 8, maximum 319). Twenty-four studies (72%) had comparison groups, 20 (60%) of which applied randomization. Conversely, 1 study (3%) randomized the anatomical models to assign them to 10 different students. On average, 2.6 groups were compared (minimum 2, maximum 10). Twenty-three studies (70%) involved medical students, of which 14 (42%) included first-year students. Six (18%) studies involved residents, 4 (12%) dental students, and 3 (9%) science students. Six studies (18%) implemented and evaluated self-directing learning with the 3DPAM. Table 4 summarizes how the pedagogical performance of 3DPAMs was evaluated in each included study.
Advantages and disadvantages
The main advantages reported by the authors using 3DPAM as a pedagogical tool for teaching normal human anatomy were the visual and haptic characteristics, including authenticity [55, 67], precision [44, 50, 72, 85], variability of consistencies [34, 45, 48, 64], colours and transparency [28, 45], solidness [24, 56, 73], effectiveness for education [16, 32, 35, 39, 52, 57, 63, 69, 79], cost [27, 41, 44, 45, 48, 51, 60, 64, 80, 81, 83], reproducibility [80], possibility of improvement or personalization [28, 30, 36, 45, 48, 51, 53, 59, 61, 67, 80], possibility of manipulation by the students [30, 49], time savings for teaching [61, 80], ease of storage [61], possibility of integrating functional anatomy or creating a specific design [51, 53, 67], rapid design for bone models [81], possibility of co-creation and taking the model home [49, 60, 71], improvement in mental rotation ability [23] and knowledge retention [32], and positive effect on educators [25, 63] as well as student satisfaction [25, 45, 46, 52, 52, 57, 63, 66, 69, 84].
The main drawbacks were related to design: stiffness [80], consistency [28, 62], lack of detail or transparency [28, 30, 34, 45, 48, 62, 64, 81], overly bright colours [45], and fragility [71]. Other drawbacks were the loss of information [30, 76], long time needed for image segmentation [36, 52, 57, 58, 74], printing time [57, 63, 66, 67], lack of anatomical variability [25] and the high cost [48].
Discussion
This systematic review summarizes 68 articles published over 9 years, highlighting the scientific community’s interest in 3DPAM as a pedagogical tool for teaching normal human anatomy. Every anatomical region has been studied and printed in 3D. Among these articles, 37 compared the 3DPAM to another model and 33 evaluated the pedagogical relevance of the 3DPAM for students.
Given the differences in the design of studies on 3D printing in anatomy, we did not feel it was appropriate to carry out a meta-analysis. A meta-analysis published in 2020 focused mainly on post-training tests of anatomical knowledge, without analysing the technical and technological aspects of the design and manufacture of 3DPAMs [10].
Model design data
The cephalic region was the most studied, probably because its anatomical complexity makes it difficult for students to picture this anatomical region in 3D space, compared to the limbs or trunk. CT scan was by far the most used image acquisition modality. This modality is widely available, especially in healthcare facilities, but its spatial resolution is limited, and its soft-tissue contrast is low. These limitations make CT scan unsuitable for segmentation and modelling of the nervous system for example. On the other hand, CT scan was preferred for the segmentation/modelling of bone tissue; the bone/soft tissue contrast facilitates these steps before 3D printing of an anatomical model. Micro-CT, on the other hand, was cited as the reference technology in terms of spatial resolution for the acquisition of bone tissue images [70]. An optical scanner or MRI can also be used for image acquisition. Higher resolution prevents the smoothing of bone surfaces and preserves the subtleties of the anatomy [59]. The choice of models also influences the spatial resolution; for example, plastinated models have lower resolution [45]. A graphic designer was needed when creating highly customized 3D models, which increases the cost (25 to 150 USD per hour of work) [43]. Obtaining a good quality.STL file was not sufficient to produce a good quality anatomical model. The printing parameters such as the orientation of the anatomical model on the printing plate must be defined [29]. Some authors suggested that advanced printing technologies such as SLS should be used whenever possible to improve the 3DPAM’s accuracy [38]. The help of a professional was required to make the 3DPAM; the most requested professionals were an engineer [72], radiologist, [75] graphic designer, [43] and anatomist [25, 28, 51, 57, 76, 77].
Segmentation and modelling software are important factors for obtaining an accurate anatomical model, but the price of these software packages and their complexity hinder their use. Some studies compared the use of different software packages and printing technologies, highlighting the advantages and disadvantages of each [68]. In addition to modelling software, printing software is required that is compatible with the chosen printer; some authors preferred to use online 3D printing [75]. If enough 3D objects will be printed, the investment may be financially profitable [72].
Plastic was by far the most used material. It is the material of choice for 3DPAM due to its large range of textures and colours. Several authors praised its high strength compared to traditional cadaveric or plastinated models [24, 56, 73]. Some plastics even have flexural or tensile properties. For example, the Filaflex used with FDM technology can stretch up to 700%. For some authors, it is the material of choice for reproducing muscles, tendons and ligaments [63]. On the other hand, two studies raised questions about the direction of the fibres as printed. Indeed, the direction of the muscle fibres is critical when modelling a muscle, along with its insertions, innervation and function [33].
Surprisingly, few studies mentioned the printing scale. Since many consider a 1:1 scale as standard, the authors may have decided not to mention it. The possibility of enlargement has not been explored much despite its benefit for directed teaching in large groups, especially given the increasing number of students per class where the actual size of the model is an important element. Of course, a full-size scale makes it easier to locate the various anatomical elements and to transpose it to patients, which probably explains why this scale is often used.
Among the multiple printers available on the market, those that provide high-definition printing in colour and in several materials – thus several textures – using PolyJet technology (material jetting or binder jetting) cost between 20,000 and 250,000 + dollars (https://www.aniwaa.com/). This high cost likely restricts the diffusion of 3DPAMs in medical schools. In addition to the price of buying a printer, the materials needed for material jetting cost more than those used for SLA or FDM printers [68]. The price of SLA or FDM printers is also more manageable, ranging from 576 to 4999 € in the articles listed in this review. According to Tripodi and colleagues, bone parts could be printed for 1.25 USD each [47]. Eleven studies concluded that 3D printing costs less than plastinated or commercial models [24, 27, 41, 44, 45, 48, 51, 60, 63, 80, 81, 83]. Furthermore, these commercial models are intended for patient information and do not have sufficient detail to be used for teaching anatomy [80]. These commercial models were considered inferior to 3DPAMs [44]. It is important to note that – in addition to the printing technology used – the final cost is also proportional to the scale and thus the final size of the 3DPAM [48]. For these reasons, the preferred scale was full size [37].
Morphological evaluation of 3D models
Only one study compared a 3DPAM to a commercially available anatomical model [72]. Cadaveric specimens were the most used comparator for 3DPAM. Despite its drawbacks, the cadaveric model remains a valuable tool for teaching anatomy. A distinction needs to be made between cadaveric dissection, prosections and dry bones. Two studies found that 3DPAMs were significantly more effective than plastinated prosections based on learning tests [16, 27]. A single study compared one hour of learning using a 3DPAM (lower limb) with one hour of dissection on the same anatomical area [78]. There was no significant difference between the two teaching methods. It is likely that few studies have been done on this topic because this comparison is difficult to set up. Dissection by students is a time-consuming task to prepare for. Several dozens of hours of dissection are sometimes necessary, depending on the dissection subjects. A third comparison can be made with dry bones. The studies by Cai and Smith found significantly better test results for the groups who used 3DPAM [51, 63]. Chen and colleagues specified that students who used the 3D model were better at recognizing structures (skull) but that there was no difference in MCQ results [69]. Finally, Tanner and colleagues demonstrated better post-test results for the group using a 3DPAM of the pterygopalatine fossa [46]. This literature review identified other new teaching tools. Among the most common were augmented reality, virtual reality, and serious gaming [43]. According to Mahrous and colleagues, the anatomical model preference depends on the number of video game hours played by the student [31]. On the other hand, the main pitfall of new tools in anatomy education is haptic feedback, especially for virtual-only tools [48].
Pedagogical performance of 3D models
A knowledge pre-test was used in most studies evaluating new 3DPAMs. These pre-tests help to avoid assessment bias. Some authors excluded all students who scored above average on the pre-test before conducting their experimental study [40]. Among the assessment biases, Garas and colleagues cited the colouring of the models but also the choice of volunteers among the student classes [61]. Staining makes anatomical structures easier to identify. Chen and colleagues imposed strict experimental conditions, with no initial intergroup differences and as much blinding as possible [69]. Lim and colleagues suggest avoiding assessment bias by having the post-test assessment prepared by a third person [16]. Some of the studies used Likert scales to assess the 3DPAM’s appropriateness. This tool is suitable for evaluating satisfaction but nevertheless has important biases that one must be aware of [86].
The educational relevance of 3DPAMs was evaluated mostly in medical students, including first-year students in 14 of the 33 studies identified. In their pilot study, Wilk and colleagues reported that medical students felt 3D printing should be incorporated into their learning of anatomy [87]. Eighty-seven percent of students surveyed in the Cercenelli study felt that their second year was the best time to use 3DPAMs [84]. Results from Tanner and colleagues also showed that students were better if they had never studied the area [46]. These data suggest that the first years of medical school are the best time to incorporate 3DPAMs into the teaching of anatomy. Ye's meta-analysis corroborates this idea [18]. Of the 27 articles included in their study, there was a significant difference in test results in favour of 3DPAMs versus conventional models for medical students but not for residents.
3DPAMs were effective as pedagogical tools in terms of achievement, [16, 35, 39, 52, 57, 63, 69, 79] long-term knowledge retention [32] and student satisfaction [25, 45, 46, 52, 57, 63, 66, 69, 84]. Expert panels have also been found these models useful [37, 42, 49, 81, 82] and two studies highlighted teacher satisfaction with 3DPAMs [25, 63]. Among all resources, Backhouse and colleagues judged 3D printing to be the best alternative to conventional anatomical models [49]. In their first meta-analysis, Ye and colleagues affirm that the post-test results of students who received instruction incorporating 3DPAMs were better than those who received instruction in 2D or on a cadaver [10]. However, they did not differentiate the 3DPAMs by their complexity but simply as heart, nervous system and abdomen. In seven studies, 3DPAMs were not superior to other models based on the knowledge tests given to students [32, 66, 69, 77, 78, 84]. In their meta-analysis, Salazar and colleagues conclude that the use of 3DPAMs specifically improves the understanding of complex anatomical structures [17]. This concept is consistent with a letter to the editor by Chytas [88]. Certain anatomical areas that are considered less complex would not require the use of 3DPAMs, while more complex anatomical areas such as the neck or nervous system would be a reasonable choices for 3DPAMs. This notion probably explains why some 3DPAMs have not been judged superior to conventional models, especially since the model's effectiveness seems to be better when the student has no knowledge in the field. Consequently, a simple model, presented to students who already have some knowledge of the subject (advanced medical students or residents), would be useless for improving student results.
Advantages and disadvantages
Of all the educational benefits listed, 11 studies highlighted the visual or tactile qualities of their models, [27, 34, 44, 45, 48, 50, 55, 63, 67, 72, 85] while 3 studies emphasized the strength and durability (33, 50–52, 63,79,85,86). Other advantages were that the students could manipulate the structures, the teacher could save time, they were easier to preserve than a cadaver, the design could be completed in less than 24 h, it could be used as a home study tool and it could be used to teach large groups [30, 49, 60, 61, 80, 81]. The 3D printing of multiple copies for teaching anatomy in large groups, make the 3D printing of models more cost-effective [26]. Using 3DPAMs increased mental rotation ability [23], and improved interpretation of cross-sectional imaging [23, 32]. Two studies found that students exposed to 3DPAMs were more attracted to surgery [40, 74]. Metal connectors can be incorporated to produce the motion needed to study functional anatomy [51, 53] or to print the model with a page-turning design [67].
3D printing made it possible to create adjustable anatomical models by improving certain aspects during the modelling stage, [48, 80] creating a suitable base, [59] merging multiple models, [36] using transparency, (49) colour, [45] or making certain internal structures visible [30]. Tripodi and colleagues used modelling clay to supplement their 3D printed bone models, highlighting the value of co-creating the model as a teaching tool [47]. In 9 studies, colour was applied after printing, [43, 46, 49, 54, 58, 59, 65, 69, 75] but only once by the students [49]. Unfortunately, that study did not assess the pedagogical quality of the model or the teaching sequence. This is something to take into consideration in the context of anatomy education, since the benefits of hybrid learning and co-creation [89] are well known. In response to growing promotions, self-learning has been implemented several times to evaluate models [24, 26, 27, 32, 46, 69, 82].
One study considered the colours of the plastic materials too bright, [45] another that the model was too fragile, [71] and two others pointed out the lack of anatomical variability when a single model was designed [25, 45]. Seven studies concluded that the anatomical detail was insufficient in their 3DPAM [28, 34, 45, 48, 62, 63, 81].
The segmentation and modelling time was considered very long and the cost very high (about 2000 USD) for more elaborate anatomical models of large and complex regions such as the retroperitoneum or the cervical region [27, 48]. In their study, Hojo and colleagues specified that it took 40 h to create their pelvic anatomical model [42]. The longest segmentation time was 380 h in the study by Weatherall and colleagues where several models were merged to make a finished paediatric airway model [36]. Segmentation and printing time was considered a drawback in nine studies [36, 42, 57, 58, 74]. However, 12 studies criticized the physical properties of their model, particularly its consistency, [28, 62] lack of transparency, [30] fragility and unicolor nature, [71] absence of soft tissues [66] or lack of detail [28, 34, 45, 48, 62, 63, 81]. These drawbacks could likely have been overcome with more segmentation or modelling time. Loss of acquisition-related information was an issue for three teams [30, 74, 77]. Patient data was used in which the iodinated contrast agent did not provide an optimal view of the blood vessels due to dose limitations [74]. The injected cadaveric model appears to be an ideal approach, freeing itself from the “as low as reasonably achievable” principle and limitations in the dose of contrast agent injected.
Limitations
Unfortunately, many articles did not mention certain key features of their 3DPAM. Less than half of the articles specified whether their 3DPAM was coloured or not. The printing scale was not consistently reported (43% of articles) and only 34% of articles mentioned the use of multiple materials. These printing parameters are crucial because they influence the 3DPAM’s pedagogical properties. Most of the articles did not provide enough information about the complexity of obtaining the 3DPAM (design time, qualifications of people, cost of software, cost of printing, etc.). This information is essential and must be taken into consideration before thinking about starting a project to develop a new 3DPAM.
Conclusions
This systematic review demonstrates that the design and 3D printing of a normal anatomical model is feasible at a low cost, particularly by using FDM or SLA printers and inexpensive single-color plastic materials. These basic models can nevertheless be improved by adding colour, or adding structures made of various materials. More realistic models – printed with several materials of different colours and textures to reproduce the haptic qualities of the reference cadaveric model as closely as possible – require access to more expensive 3D printing technologies and substantially longer design time. This would greatly increase the overall cost. No matter the chosen printing process, selecting the appropriate imaging modality is key to successful 3DPAMs. The higher the spatial resolution, the more the model will match reality and be usable at advanced levels of study. From a pedagogical point of view, 3DPAMs are effective tools for teaching anatomy, as evidenced by knowledge tests carried out with students and by the students’ satisfaction. The pedagogical effectiveness of 3DPAMs seems to be best when they reproduce complex anatomical areas, and they are used by students early in their medical studies.
Availability of data and materials
The datasets generated and/or analysed for the current study are not publicly available due to the language barrier but are available from the corresponding author upon reasonable request.
References
Drake RL, Lowrie DJ, Prewitt CM. Survey of gross anatomy, microscopic anatomy, neuroscience, and embryology courses in medical school curricula in the United States. Anat Rec. 2002;269(2):118–22.
Ghosh SK. Cadaveric dissection as an educational tool for anatomical sciences in the 21st century: Dissection as an Educational Tool. Anat Sci Educ. 2017;10(3):286–99.
Sugand K, Abrahams P, Khurana A. The anatomy of anatomy: A review for its modernization. Anat Sci Educ. 2010;NA-NA.
Estai M, Bunt S. Best teaching practices in anatomy education: A critical review. Ann Anat - Anat Anz. 2016;208:151–7.
Aziz MA, Mckenzie JC, Wilson JS, Cowie RJ, Ayeni SA, Dunn BK. The human cadaver in the age of biomedical informatics. Anat Rec. 2002;269(1):20–32.
Papa V, Vaccarezza M. Teaching Anatomy in the XXI Century: New Aspects and Pitfalls. Sci World J. 2013;2013:1–5.
Yiasemidou M, Gkaragkani E, Glassman D, Biyani CS. Cadaveric simulation: a review of reviews. Ir J Med Sci. 2018;187(3):827–33.
Santos VA, Barreira MP, Saad KR. Technological resources for teaching and learning about human anatomy in the medical course: Systematic review of literature. Anat Sci Educ. 2022;15(2):403–19.
Erolin C. Interactive 3D Digital Models for Anatomy and Medical Education. In: Rea PM, editor. Biomedical Visualisation [Internet]. Cham: Springer International Publishing; 2019 [retrieved 3 March 2023]. p. 1‑16. (Advances in Experimental Medicine and Biology; vol. 1138). Available on: http://link.springer.com/https://doi.org/10.1007/978-3-030-14227-8_1
Ye Z, Dun A, Jiang H, Nie C, Zhao S, Wang T, et al. The role of 3D printed models in the teaching of human anatomy: a systematic review and meta-analysis. BMC Med Educ. 2020;20(1):335.
Witze A. NASA to send 3D printer into space. Nature. 2014;513(7517):156–156.
Snyder TJ, Andrews M, Weislogel M, Moeck P, Stone-Sundberg J, Birkes D, et al. 3D Systems’ Technology Overview and New Applications in Manufacturing, Engineering, Science, and Education. 3D Print Addit Manuf. 2014;1(3):169‑76.
Valverde I. Three-dimensional printed cardiac models: applications in the field of medical education, cardiovascular surgery, and structural heart interventions. Rev Esp Cardiol Engl Ed. 2017;70(4):282–91.
Chytas D, Johnson EO, Piagkou M, Tsakotos G, Babis GC, Nikolaou VS, et al. Three-dimensional printing in anatomy teaching: current evidence. Surg Radiol Anat. 2020;42(7):835–41.
Keenan ID, ben Awadh A. Integrating 3D Visualisation Technologies in Undergraduate Anatomy Education. In: Rea PM, editor. Biomedical Visualisation [Internet]. Cham: Springer International Publishing; 2019 [retrieved 3 March 2023]. p. 39‑53. (Advances in Experimental Medicine and Biology; vol. 1120). Available on: http://link.springer.com/https://doi.org/10.1007/978-3-030-06070-1_4
Lim KHA, Loo ZY, Goldie SJ, Adams JW, McMenamin PG. Use of 3D printed models in medical education: A randomized control trial comparing 3D prints versus cadaveric materials for learning external cardiac anatomy: Use of 3D Prints in Medical Education. Anat Sci Educ. 2016;9(3):213–21.
Salazar D, Thompson M, Rosen A, Zuniga J. Using 3D printing to improve student education of complex anatomy: A systematic review and meta-analysis. Med Sci Educ. 2022;32(5):1209–18.
Ye Z, Jiang H, Bai S, Wang T, Yang D, Hou H, et al. Meta-analyzing the efficacy of 3D printed models in anatomy education. Front Bioeng Biotechnol. 2023;11:1117555.
Fleming C, Sadaghiani MS, Stellon MA, Javan R. Effectiveness of three-dimensionally printed models in anatomy education for medical students and resident physicians: Systematic review and meta-analysis. J Am Coll Radiol. 2020;17(10):1220–9.
Leung G, Pickett AT, Bartellas M, Milin A, Bromwich M, Shorr R, et al. Systematic review and meta-analysis of 3D-printing in otolaryngology education. Int J Pediatr Otorhinolaryngol. 2022;155: 111083.
Lau I, Sun Z. Three-dimensional printing in congenital heart disease: A systematic review. J Med Radiat Sci. 2018;65(3):226–36.
Page MJ, McKenzie JE, Bossuyt PM, Boutron I, Hoffmann TC, Mulrow CD, The PRISMA, et al. statement: an updated guideline for reporting systematic reviews. BMJ. 2020;2021: n71.
Ben Awadh A, Clark J, Clowry G, Keenan ID. Multimodal three-dimensional visualization enhances novice learner interpretation of basic cross-sectional anatomy. Anat Sci Educ. 2022;15(1):127–42.
Chandrasekaran R, Radzi S, Kai PZ, Rajalingam P, Rotgans J, Mogali SR. A validated instrument measuring students’ perceptions on plastinated and three-dimensional printed anatomy tools. Anat Sci Educ. 2022;15(5):850–62.
Hammerton C, Yip SWL, Manobharath N, Myers G, Sturrock A. Are 3D printed models acceptable in assessment? Clin Teach. 2022;19(3):221–8.
Harmon DJ, Klein BA, Im C, Romero D. Development and implementation of a three-dimensional (3D) printing elective course for health science students. Anat Sci Educ. 2022;15(3):620–7.
Mogali SR, Chandrasekaran R, Radzi S, Peh ZK, Tan GJS, Rajalingam P, et al. Investigating the effectiveness of three-dimensionally printed anatomical models compared with plastinated human specimens in learning cardiac and neck anatomy: A randomized crossover study. Anat Sci Educ. 2022;15(6):1007–17.
Tan L, Wang Z, Jiang H, Han B, Tang J, Kang C, et al. Full color 3D printing of anatomical models. Clin Anat. 2022;35(5):598–608.
Bertolini M, Rossoni M, Colombo G. Operative workflow from CT to 3D printing of the heart: opportunities and challenges. Bioengineering. 2021;8(10):130.
Krishnasamy S, Mokhtar RAR, Singh R, Sivallingam S, Aziz YFA, Mathaneswaran V. 3D Rapid Prototyping Heart Model Validation for Teaching and Training — A Pilot Project in a Teaching Institution. Braz J Cardiovasc Surg [Internet]. 2021 [retrieved 3 March 2023];36(5). Available on: https://cdn.publisher.gn1.link/bjcvs.org/pdf/v36n5a18.pdf
Mahrous A, Elgreatly A, Qian F, Schneider GB. A comparison of pre-clinical instructional technologies: Natural teeth, 3D models, 3D printing, and augmented reality. J Dent Educ. 2021;85(11):1795–801.
O’Brien C, Souza CA, Sheikh A, Miguel O, Wood T. Use of tracheobronchial tree 3-dimensional printed model: does it improve trainees’ understanding of segmentation anatomy? A prospective study. 3D Print Med. 2021;7(1):2.
Ruiz OG, Dhaher Y. Multi-color and Multi-Material 3D Printing of Knee Joint models. 3D Print Med. 2021;7(1):12.
Smillie R, Williams M, Richard M, Cosker T. Producing three-dimensional printed models of the hepatobiliary system from computed tomography imaging data. Ann R Coll Surg Engl. 2021;103(1):41–6.
Vatankhah R, Emadzadeh A, Nekooei S, Tafaghodi Yousefi B, Khadem Rezaiyan M, Karimi Moonaghi H, et al. 3D Printed Models for Teaching Orbital Anatomy, Anomalies and Fractures. J Ophthalmic Vis Res [Internet]. 25 oct 2021 [retrieved 3 March 2023]; Available on: https://knepublishing.com/index.php/JOVR/article/view/9751
Weatherall AD, Rogerson MD, Quayle MR, Cooper MG, McMenamin PG, Adams JW. A Novel 3-dimensional printing fabrication approach for the production of pediatric airway models. Anesth Analg. 2021;133(5):1251–9.
Abdulcadir J, Dewaele R, Firmenich N, Remuinan J, Petignat P, Botsikas D, et al. In Vivo imaging-based 3-dimensional pelvic prototype models to improve education regarding sexual anatomy and physiology. J Sex Med. 2020;17(9):1590–602.
Chae R, Sharon JD, Kournoutas I, Ovunc SS, Wang M, Abla AA, et al. Replicating skull base anatomy with 3D technologies: A comparative study using 3D-scanned and 3D-printed models of the temporal bone. Otol Neurotol. 2020;41(3):e392-403.
Chedid VG, Kamath AA, M. Knudsen J, Frimannsdottir K, Yost KJ, R. Geske J, et al. Three-Dimensional-Printed Liver Model Helps Learners Identify Hepatic Subsegments: A Randomized-Controlled Cross-Over Trial. Am J Gastroenterol. 2020;115(11):1906‑10.
Chen Y, Qian C, Shen R, Wu D, Bian L, Qu H, et al. 3D printing technology improves medical interns’ understanding of anatomy of gastrocolic trunk. J Surg Educ. 2020;77(5):1279–84.
Damon A, Clifton W, Valero-Moreno F, Nottmeier E. Orientation Planning in the Fused Deposition Modeling 3D Printing of Anatomical Spine Models. Cureus [Internet]. 23 Feb 2020 [retrieved 3 March 2023]; Available on: https://www.cureus.com/articles/28416-orientation-planning-in-the-fused-deposition-modeling-3d-printing-of-anatomical-spine-models
Hojo D, Murono K, Nozawa H, Kawai K, Hata K, Tanaka T, et al. Utility of a three-dimensional printed pelvic model for lateral pelvic lymph node dissection. Int J Colorectal Dis. 2020;35(5):905–10.
Javan R, Rao A, Jeun BS, Herur-Raman A, Singh N, Heidari P. From CT to 3D printed models, serious gaming, and virtual reality: framework for educational 3D visualization of complex anatomical spaces from within—the pterygopalatine fossa. J Digit Imaging. 2020;33(3):776–91.
Low CM, Choby G, Viozzi M, Morris JM. Construction of three-dimensional printed anatomic models for frontal sinus education. Neuroradiol J. 2020;33(1):80–4.
Radzi S, Tan HKJ, Tan GJS, Yeong WY, Ferenczi MA, Low-Beer N, et al. Development of a three-dimensional printed heart from computed tomography images of a plastinated specimen for learning anatomy. Anat Cell Biol. 2020;53(1):48–57.
Tanner JA, Jethwa B, Jackson J, Bartanuszova M, King TS, Bhattacharya A, et al. A Three-dimensional print model of the pterygopalatine fossa significantly enhances the learning experience. Anat Sci Educ. 2020;13(5):568–80.
Tripodi N, Kelly K, Husaric M, Wospil R, Fleischmann M, Johnston S, et al. The impact of three-dimensional printed anatomical models on first-year student engagement in a block mode delivery. Anat Sci Educ. 2020;13(6):769–77.
Williams MA, Smillie RW, Richard M, Cosker TDA. Producing 3D printed high-fidelity retroperitoneal models from in vivo patient data: The Oxford Method. J Anat. 2020;237(6):1177–84.
Backhouse S, Taylor D, Armitage JA. Is this mine to keep? Three-dimensional printing enables active, personalized learning in anatomy. Anat Sci Educ. 2019;12(5):518–28.
Bartikian M, Ferreira A, Gonçalves-Ferreira A, Neto LL. 3D printing anatomical models of head bones. Surg Radiol Anat. 2019;41(10):1205–9.
Cai B, Rajendran K, Bay BH, Lee J, Yen C. The effects of a functional three-dimensional (3D) printed knee joint simulator in improving anatomical spatial knowledge. Anat Sci Educ. 2019;12(6):610–8.
Hojo D, Murono K, Nozawa H, Kawai K, Hata K, Tanaka T, et al. Utility of a Three-Dimensional Printed Pelvic Model for Lateral Pelvic Lymph Node Dissection Education: A Randomized Controlled Trial. J Am Coll Surg. 2019;229(6):552–559e3.
Kanagasuntheram R, Geh NKT, Yen CC, Dheen ST, Bay BH. A composite 3D printed model of the midcarpal joint. Anat Sci Int. 2019;94(1):158–62.
Shen Z, Yao Y, Xie Y, Guo C, Shang X, Dong X, et al. The process of 3D printed skull models for anatomy education. Comput Assist Surg. 2019;24(sup1):121–30.
Skrzat J, Zdilla MJ, Brzegowy P, Hołda M. 3 D printed replica of the human temporal bone intended for teaching gross anatomy. Folia Med Cracov. 2019;59(3):23–30.
Ugidos Lozano MT, Haro FB, Ruggiero A, Manzoor S, Juanes Méndez JA. Evaluation of the applicability of 3d models as perceived by the students of health sciences. J Med Syst. 2019;43(5):108.
Yi X, Ding C, Xu H, Huang T, Kang D, Wang D. Three-dimensional printed models in anatomy education of the ventricular system: a randomized controlled study. World Neurosurg. 2019;125:e891-901.
Zhang X, Xu Z, Tan L, Li Y, Liu L, Chen N, et al. Application of three-dimensional reconstruction and printing as an elective course for undergraduate medical students: an exploratory trial. Surg Radiol Anat. 2019;41(10):1193–204.
Bannon R, Parihar S, Skarparis Y, Varsou O, Cezayirli E. 3D printing the pterygopalatine fossa: a negative space model of a complex structure. Surg Radiol Anat. 2018;40(2):185–91.
Casciato DJ, Builes NA, Singh BN. Using three-dimensional printing to enhance cross-sectional anatomy instruction. J Am Podiatr Med Assoc. 2018;108(4):304–10.
Garas M, Vaccarezza M, Newland G, McVay-Doornbusch K, Hasani J. 3D-Printed specimens as a valuable tool in anatomy education: A pilot study. Ann Anat - Anat Anz. 2018;219:57–64.
Mogali SR, Yeong WY, Tan HKJ, Tan GJS, Abrahams PH, Zary N, et al. Evaluation by medical students of the educational value of multi-material and multi-colored three-dimensional printed models of the upper limb for anatomical education: 3D Printed Upper Limb in Anatomical Education. Anat Sci Educ. 2018;11(1):54–64.
Smith CF, Tollemache N, Covill D, Johnston M. Take away body parts! An investigation into the use of 3D-printed anatomical models in undergraduate anatomy education. Anat Sci Educ. 2018;11(1):44–53.
Smith ML, Jones JFX. Dual-extrusion 3D printing of anatomical models for education: Two Materials 3D Printing in Anatomy. Anat Sci Educ. 2018;11(1):65–72.
Suzuki R, Taniguchi N, Uchida F, Ishizawa A, Kanatsu Y, Zhou M, et al. Transparent model of temporal bone and vestibulocochlear organ made by 3D printing. Anat Sci Int. 2018;93(1):154–9.
Wu AM, Wang K, Wang JS, Chen CH, Yang XD, Ni WF, et al. The addition of 3D printed models to enhance the teaching and learning of bone spatial anatomy and fractures for undergraduate students: a randomized controlled study. Ann Transl Med. 2018;6(20):403–403.
Zhang XD, Li ZH, Wu ZS, Lin W, Lin WJ, Lin JC, et al. A novel three-dimensional-printed paranasal sinus–skull base anatomical model. Eur Arch Otorhinolaryngol. 2018;275(8):2045–9.
Bücking TM, Hill ER, Robertson JL, Maneas E, Plumb AA, Nikitichev DI. From medical imaging data to 3D printed anatomical models. Chen HCI, éditeur. PLOS ONE. 2017;12(5):e0178540.
Chen S, Pan Z, Wu Y, Gu Z, Li M, Liang Z, et al. The role of three-dimensional printed models of skull in anatomy education: a randomized controlled trail. Sci Rep. 2017;7(1):575.
Favier V, Zemiti N, Caravaca Mora O, Subsol G, Captier G, Lebrun R, et al. Geometric and mechanical evaluation of 3D-printing materials for skull base anatomical education and endoscopic surgery simulation – A first step to create reliable customized simulators. Cavallo LM, editor. PLOS ONE. 2017;12(12):e0189486.
Javan R, Davidson D, Javan A. Nerves of steel: a low-cost method for 3D printing the cranial nerves. J Digit Imaging. 2017;30(5):576–83.
Legocki AT, Duffy-Peter A, Scott AR. Benefits and limitations of entry-level 3-dimensional printing of maxillofacial skeletal models. JAMA Otolaryngol Neck Surg. 2017;143(4):389.
Lozano MTU, Haro FB, Diaz CM, Manzoor S, Ugidos GF, Mendez JAJ. 3D digitization and prototyping of the skull for practical use in the teaching of human anatomy. J Med Syst. 2017;41(5):83.
Fasel JHD, Aguiar D, Kiss-Bodolay D, Montet X, Kalangos A, Stimec BV, et al. Adapting anatomy teaching to surgical trends: a combination of classical dissection, medical imaging, and 3D-printing technologies. Surg Radiol Anat. 2016;38(3):361–7.
Javan R, Herrin D, Tangestanipoor A. Understanding spatially complex segmental and branch anatomy using 3D printing. Acad Radiol. 2016;23(9):1183–9.
Kong X, Nie L, Zhang H, Wang Z, Ye Q, Tang L, et al. Do three-dimensional visualization and three-dimensional printing improve hepatic segment anatomy teaching? A randomized controlled study. J Surg Educ. 2016;73(2):264–9.
Kong X, Nie L, Zhang H, Wang Z, Ye Q, Tang L, et al. Do 3D printing models improve anatomical teaching about hepatic segments to medical students? A randomized controlled study. World J Surg. 2016;40(8):1969–76.
O’Reilly MK, Reese S, Herlihy T, Geoghegan T, Cantwell CP, Feeney RNM, et al. Fabrication and assessment of 3D printed anatomical models of the lower limb for anatomical teaching and femoral vessel access training in medicine: Subject Specific 3D-Printed Anatomy. Anat Sci Educ. 2016;9(1):71–9.
Shah KJ, Peterson JC, Beahm DD, Camarata PJ, Chamoun RB. Three-dimensional printed model used to teach skull base anatomy through a transsphenoidal approach for neurosurgery residents. Oper Neurosurg. 2016;12(4):326–9.
Adams JW, Paxton L, Dawes K, Burlak K, Quayle M, McMenamin PG. 3D printed reproductions of orbital dissections: a novel mode of visualising anatomy for trainees in ophthalmology or optometry. Br J Ophthalmol. 2015;99(9):1162–7.
Cohen J, Reyes SA. Creation of a 3D printed temporal bone model from clinical CT data. Am J Otolaryngol. 2015;36(5):619–24.
Hochman JB, Rhodes C, Kraut J, Pisa J, Unger B. End user comparison of anatomically matched 3-dimensional printed and virtual haptic temporal bone simulation: a pilot study. Otolaryngol Neck Surg. 2015;153(2):263–8.
McMenamin PG, Quayle MR, McHenry CR, Adams JW. The production of anatomical teaching resources using three-dimensional (3D) printing technology: 3D Printing in Anatomy Education. Anat Sci Educ. 2014;7(6):479–86.
Cercenelli L, De Stefano A, Billi AM, Ruggeri A, Marcelli E, Marchetti C, et al. AEducaAR, anatomical education in augmented reality: A pilot experience of an innovative educational tool combining AR technology and 3D printing. Int J Environ Res Public Health. 2022;19(3):1024.
Young JC, Quayle MR, Adams JW, Bertram JF, McMenamin PG. Three-dimensional printing of archived human fetal material for teaching purposes: 3D printed human gestational replicas. Anat Sci Educ. 2019;12(1):90–6.
Jebb AT, Ng V, Tay L. A review of key likert scale development advances: 1995–2019. Front Psychol. 2021;12: 637547.
Wilk R, Likus W, Hudecki A, Syguła M, Różycka-Nechoritis A, Nechoritis K. What would you like to print? Students’ opinions on the use of 3D printing technology in medicine. Miller AC, éditeur. PLOS ONE. 2020;15(4):e0230851.
Chytas D, Salmas M, Demesticha T, Troupis T. Three-dimensional printing in anatomy education: Is it similarly useful for teaching of all anatomical regions and structures? Anat Sci Educ. 2023;16(1):5–6.
Könings KD, Mordang S, Smeenk F, Stassen L, Ramani S. Learner involvement in the co-creation of teaching and learning: AMEE Guide No. 138. Med Teach. 2021;43(8):924‑36.
Acknowledgements
The authors wish to thank the Laboratoire d’Anatomie de l’UFR Santé de Besançon for making this study possible. The authors acknowledge the editorial assistance provided by Joanne Archambault, PhD.
Funding
This project has been performed thanks to the RITM-BFC program (contract ANR-17-NCUN-0003).
Author information
Authors and Affiliations
Contributions
Eléonore Brumpt: conceptualization, methodology, formal analysis, investigation, data curation, writing original draft. Eugénie Bertin: formal analysis, investigation, resources. Laurent Tatu: conceptualization, validation, investigation, formal analysis, supervision. Aurélien Louvrier: conceptualization, methodology, formal analysis, investigation, writing original draft, supervision. All authors read and approved the final manuscript.
Authors’ information
- ELEONORE BRUMPT MD, MSc is a medical doctor (radiologist), anatomy teacher and a second-year PhD student in the Doctoral School Environment-Health at the Bourgogne Franche-Comté University.
- EUGENIE BERTIN MD, MSc is a medical doctor (maxillofacial surgery) and anatomy teacher assistant at the Bourgogne Franche-Comté University.
- LAURENT TATU MD, PhD is a medical professor (neurology) and the Head of the Besançon Medical Faculty Anatomy Laboratory at the Bourgogne Franche-Comté University.
- AURELIEN LOUVRIER MD, PhD is a medical doctor (maxillofacial surgery) and the Head of the Besançon Medical 3D Printing Laboratory at the Bourgogne Franche-Comté University.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.
About this article
Cite this article
Brumpt, E., Bertin, E., Tatu, L. et al. 3D printing as a pedagogical tool for teaching normal human anatomy: a systematic review. BMC Med Educ 23, 783 (2023). https://doi.org/10.1186/s12909-023-04744-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s12909-023-04744-w