Abstract
Background
Buruli ulcer, caused by Mycobacterium ulcerans, is a localized skin lesion that can progress to extensive ulceration and necrosis if left untreated. Unpublished studies of hydrated clays for therapeutic, topical treatment of Buruli ulcer suggest that specific clay mineral products may have beneficial effects on wound healing. In this study, we evaluated the in vitro antibacterial activity of a panel of clay mixtures and their derivative leachates against M. ulcerans and assessed the in vivo efficacy of topically-applied, hydrated clays on Buruli ulcer progression in mice infected with M. ulcerans.
Methods
M. ulcerans 1615 was incubated with 10 % suspensions of CB07, CB08, CB09, CB10, and BY07 clay mixtures, and survival was determined over 28 days. For animal experiments, we examined the effect of topical hydrated clay therapy on Buruli ulcer progression in vivo in mouse tails subcutaneously infected with M. ulcerans 1615.
Results
The CB07, CB08, and CB09 clays exhibited bactericidal activity against M. ulcerans after 7, 14, 21, and 28 days of incubation. In contrast, clay leachates exhibited inhibitory, bacteriostatic effects on M. ulcerans growth in vitro. After establishing an ulcerative M. ulcerans infection for three months, ulcerated regions of the tails were treated once daily (five consecutive days per week) for 22 days with hydrated CB09 clay poultices. Mice in the clay treatment group exhibited healing as assessed by gross morphological changes and a reduction in M. ulcerans present in the wounds.
Conclusions
These data reveal that specific clays exhibit in vitro bactericidal activity against M. ulcerans and that hydrated clay poultices may offer a complementary and integrative strategy for topically treating Buruli ulcer disease.
Similar content being viewed by others
Background
Buruli ulcer, a skin disease caused by Mycobacterium ulcerans, is the world’s third most common mycobacterial infection after tuberculosis and leprosy [1]. The macrolide exotoxin, mycolactone, is a key M. ulcerans virulence factor and plays a central role in Buruli ulcer pathology [2]. After M. ulcerans infection is established, Buruli ulcer appears as a painless nodule in the skin. Left untreated, M. ulcerans destroys skin, subcutaneous fat, and sometimes bone [3–6]. Gradually, an ulcer develops with a necrotic center and undermined edges, surrounded by an indurated area [6–8].
Buruli ulcer occurs primarily in resource-poor areas where limited access and the cost of seeking health care can be prohibitive. Given that the disease symptoms are generally painless, some patients do not seek treatment until the disease has progressed to the ulcerative stage [1, 3, 9]. M. ulcerans infection can be effectively managed with a combination antibiotic therapy of rifampicin and streptomycin or rifampicin and clarithromycin [10–12]. Lesions may also spontaneously heal by unknown mechanisms [1, 8]. In the ulcerative stage of disease, M. ulcerans infection is generally treated by surgical removal of infected and surrounding healthy skin and tissue, pre- and post-surgical antibiotic administration, and subsequently may require grafting of healthy skin tissue [13]. Cure from the disease is expensive, time consuming, causes scarring and tissue damage, and may result in deformities and disabilities. Moreover, despite free of charge biomedical care and support for Buruli ulcer patients in Cameroon, non-medical costs, productivity losses, and social isolation cause patients to abandon in-patient hospitalization and medical treatment [14]. A topical, therapeutic strategy that complements existing treatment options and is socially acceptable in parts of the world where Buruli ulcer is problematic would be desirable [14, 15].
Previously, topical application of hydrated clay poultices was observed to be effective in treating and promoting healing of infected tissue in Buruli ulcer patients [16]. In the uncontrolled, observational study, either green illite or green montmorillonite clays were hydrated and applied daily as a 2-cm thick poultice with an overlay of 10-30 cm beyond the ulcer. After months of topical treatment, the ulcers were minimized, and the infections often healed with some soft tissue scarring [16]. Haydel et al. [17] subjected the two clay minerals used in the above study to in vitro antimicrobial susceptibility testing, demonstrating effects ranging from enhanced microbial growth to complete growth inhibition of several pathogenic and non-pathogenic bacteria. These patient observations [16] and in vitro microbiological data [17] imply that topical application of hydrated clays or other absorptive materials could potentially be an effective, inexpensive, and complementary treatment option for Buruli ulcer. However, the effect of hydrated clays on M. ulcerans growth in vitro or during in vivo infection remains unknown. In this study, we examined the effect of different clay mixtures and their derivative leachates on M. ulcerans growth in vitro. We also examined the effect of antimycobacterial clay treatment on Buruli ulcer progression in vivo in a mouse tail model of infection.
Methods
M. ulcerans growth
M. ulcerans 1615 was obtained from Dr. Pamela Small (University of Tennessee, Knoxville, TN, USA). Bacteria were grown on Middlebrook 7H10 agar (Difco) supplemented with 10 % oleic acid-bovine serum albumin-dextrose-catalase (OADC), 0.05 % Tween 20, and 0.5 % glycerol (supplemented M7H10 agar) at 32 °C. Bacterial inocula were serially passaged through a 25-guage needle to disrupt mycobacterial clumps, diluted in PBS (pH 7.4) to obtain the desired concentration based on OD600 measurements, and quantified by plating on supplemented M7H10 agar to determine viable colony forming units (CFU).
Clay mixtures and clay mixture leachate preparation
Antibacterial, mineralogical, and chemical characteristics of the CB07, CB08, CB09, CB10, and BY07 clay mixtures and derived leachates have been previously described [18–20]. The CB clay mixtures are all composed of approximately 52 % clays and 48 % non-clay minerals [20]. The most abundant clay mineral in all of the CB samples is illite-smectite (36–37 %), followed by montmorillonite (9.7–14.2 %) and kaolinite (1.4–3.6 %). The most abundant non-clay mineral present in the CB samples is quartz (34–37.3 %), followed by pyrite (4–5.5 %) and jarosite (2.4–4.7 %) [20]. The most abundant minerals present in the BY07 clay mixture are Ca-smectite clay (37.3 %), followed by anorthoclase feldspar (23.0 %) and quartz (13.7 %) [19]. All clay mixtures were sterilized by autoclaving for 1 h at 121 °C prior to experimental use. Derived leachates were obtained by vigorously stirring clay mixtures (1 g/20 ml) in sterile, deionized H2O (dH2O) for 24 h. Subsequently, the hydrated clay mixture suspensions were centrifuged (31,000 × g) for 3 h at 4 °C to separate insoluble and soluble fractions. The aqueous supernatant (leachate) was collected and sterilized by passage through a 0.22 μm filter.
In vitro antimicrobial susceptibility testing
M. ulcerans 1615 were exposed to CB07, CB08, CB09, CB10, and BY07 clay mixtures or derived leachates [18, 19], and survival was determined by enumerating colonies on supplemented M7H10 agar plates. Briefly, 100 mg of sterilized clay minerals were added to late-logarithmic phase M. ulcerans in supplemented M7H9 broth (1 ml), and the bacteria-clay suspensions were incubated at 32 °C on a rotating drum. To assess antimicrobial activity of leachates, late-logarithmic phase M. ulcerans 1615 was pelleted, resuspended in 1 ml of CB07, CB08, CB09, CB10, or BY07 clay leachates, water, or supplemented M7H9 broth, and incubated at 32 °C on a rotating drum. Experimental samples and controls were collected on 0, 7, 14, 21, and 28 days, subjected to 10-fold serial dilutions, plated on supplemented M7H10 agar, and incubated at 32 °C to determine viable CFU. Bactericidal activity is defined as the ability to kill bacteria, while bacteriostatic activity means that the agent prevents the growth of bacteria. Minimal bactericidal concentration (MBC) is defined as the lowest concentration of a particular antibacterial agent that kills ≥ 99.9 % of the bacterial population in a liquid medium.
Bacterial inoculum preparation for in vivo studies
To determine the M. ulcerans 1615 inoculum required to establish a visible ulcer, groups of four female BALB/c mice, aged four to six weeks, were injected in the tail with 103, 105, or 107 CFU of M. ulcerans in 30 μl PBS. Aliquots of M. ulcerans 1615 inoculum, grown in supplemented M7H9 broth to late-logarithmic phase of growth, were prepared as described above.
Animal infection procedures and bacterial enumeration of M. ulcerans-infected mouse tails
A total of 30 four- to-six week old female BALB/c mice (Charles River Laboratories) were subcutaneously injected in the tail with ~106 M. ulcerans 1615 cells in 30 μl of PBS. During M. ulcerans inoculation, the mice were anesthetized by intraperitoneal injection of 0.05 ml per 25 g of body weight with a mixture containing 21 mg ketamine, 2.4 mg xylazine, and 0.3 mg acepromazine. Five additional mice injected with PBS served as negative controls. On day one post inoculation, five mice infected with M. ulcerans were euthanized, and the tails were used to enumerate M. ulcerans in the infected animals. Briefly, tails were minced with blades, ground with a Potter-Elvehjem homogenizer in 0.15 M NaCl, and decontaminated with an equal volume of N-acetyl-l-cysteine sodium hydroxide. Aliquots of serial dilutions were plated on supplemented M7H10 agar, and the plates were incubated at 32 °C for 8-10 weeks. Mice were monitored daily. Of the 25 remaining animals infected with M. ulcerans, only 15 animals developed a visible ulcer. Five animals were euthanized to enumerate bacterial load before treatment, and the remaining 10 animals were either treated with hydrated clay poultices (n = 5) or left untreated (n = 5). All animal experiments were carried out in strict accordance with the recommendations in the Guide for the Care and Use of Laboratory Animals of the National Institutes of Health. All animal procedures were approved by the Arizona State University Animal Care and Use Committee (protocols 09-1030R and 12-1240R) and conducted according to relevant national and international guidelines.
Topical application of hydrated clay poultices
Approximately three months postinfection, mice were either treated with hydrated clay at the site of infection or cleansed with sterile saline (no treatment). Mice in the clay treatment group (n = 5) were treated with hydrated CB09 clay (~0.2 grams clay mixed with 100 μl sterile dH2O) at the site of M. ulcerans infection. During topical application of hydrated clay poultices, mice were restrained using a commercial acrylic mouse restrainer. The infected area of the tail was initially washed with cotton swabs dipped in sterile dH2O. Subsequently, a sterile cotton swab was used to evenly apply a thick poultice of hydrated clay to the site of infection. Infected and treated tails were then covered with Tegaderm waterproof transparent dressings followed by an adhesive bandage to prevent the mice from disturbing and removing the clay poultice. For five consecutive days per week, the Tegaderm dressing and adhesive bandages were removed, and the infected tails were cleansed with sterile dH2O. After gentle washing to remove the clay poultice, freshly hydrated clay was applied, and the tails were redressed with bandages. Mice in the no treatment group (n = 5) did not undergo any treatment at the site of M. ulcerans infection. Similar to the infected and treated animals, the infected area of the tails of mice in the no treatment group was subjected to gentle washing with sterile water and subsequent redressing with Tegaderm and an adhesive bandage for five consecutive days per week. Decreased erythema and ulceration and reduction in bacterial load were considered indicators of wound healing. Two animals, one in the clay treatment group and one in the no treatment group, developed secondary infections and were euthanized prior to the end of the study. After 22 days of treatment, the remaining eight mice were euthanized. To enumerate bacterial load, the tails of the euthanized animals were removed aseptically, weighed, and homogenized as described above. The number of viable M. ulcerans cells in the tissue was determined by plating serial dilutions on supplemented M7H10 agar. The CFU were counted after 8-10 weeks of incubation at 32 °C and expressed as CFU/g tissue.
Statistical analyses
We used ANOVA with Tukey’s or Dunnett’s multiple comparisons to assess statistical significance. Each P value was adjusted to account for multiple comparisons of mean values across groups. Data were analyzed using GraphPad Prism 6.
Results
Clays are bactericidal to M. ulcerans in vitro
A 10 % suspension of clays was tested for in vitro bactericidal activity against M. ulcerans. Of the five different clays tested, CB07 and CB09 exhibited complete M. ulcerans bactericidal activity within 7 days of exposure, while CB08 required 14 days of exposure to yield complete bactericidal activity (Fig. 1). BY07 required 21 days to demonstrate complete bactericidal activity, while exposure to CB10 only minimally inhibited M. ulcerans growth over 28 days (Fig. 1).
Effect of clay mixtures on M. ulcerans growth in vitro. M. ulcerans was incubated with a 10 % suspension of clay in supplemented M7H9 broth at 32 °C. After 7, 14, 21, and 28 d, survival was determined by plating samples on supplemented M7H10 agar and incubation at 32 °C to determine viable CFU. M. ulcerans growth in supplemented M7H9 broth is shown as a control. Data represent three independent experiments performed in triplicate, and results are expressed as mean ± SEM. ****, p < 0.0001; ANOVA, Tukey’s multiple comparisons
Effect of aqueous clay leachates on M. ulcerans growth in vitro
To differentiate the bactericidal effect of the soluble ions released from the clay particles, we examined the effect of aqueous leachates on growth of M. ulcerans. Leachates, which contain water-leachable components of the clay mixtures, were prepared and assayed for antibacterial activity against M. ulcerans. Compared to M. ulcerans growth inhibition during water incubation, CB08 leachate (CB08-L), CB09 leachate (CB09-L), and CB10 leachate (CB10-L) did not exhibit inhibitory activity over 28 days, and in some cases, incubation with the leachates enhanced M. ulcerans viability (Fig. 2). In contrast, incubation with CB07 leachate (CB07-L) and BY07 leachate (BY07-L) resulted in increasing and significant bactericidal activity (p < 0.0001) over 28 days (Fig. 2).
Effect of aqueous clay leachates on M. ulcerans growth in vitro. M. ulcerans was exposed to 1 ml of supplemented M7H9 broth (control), sterile deionized H2O, or clay leachates. At specified times, samples were plated on supplemented M7H10 agar and incubated at 32 °C to determine viable CFU. Data represent three independent experiments performed in triplicate, and results are expressed as mean ± SD. Statistically significant differences, compared to dH2O-incubated samples on corresponding days, are shown. ***, p < 0.001; ****, p < 0.0001; ANOVA, Tukey’s multiple comparisons
Development and progression of M. ulcerans in mouse tails
A pilot study was conducted to determine the optimal inoculum of M. ulcerans that would induce a visible ulcer in mouse tails. BALB/c mice were infected with 7.9 × 103, 1.0 × 105 CFU, or 1.6 × 107 M. ulcerans CFU. By the second week of infection, all three groups of animals developed swelling and erythema in the tails around the area of inoculation. Although the swelling subsided after the third week of infection, there was persistent erythema in all three groups. By 36 days postinfection, mice in the 105 and 107 groups developed small pinpoint ulcers on their tails. By three months postinfection, mice in the 107 inoculum group developed the most pronounced ulcers.
Therapeutic effect of hydrated clay on Buruli ulcer progression in mice
Since the clays had a bactericidal effect on M. ulcerans growth in vitro, we examined the effect of hydrated clay on progression of M. ulcerans infection in vivo. BALB/c mice were subcutaneously infected in the tails with an inoculum of 1.5 × 106 M. ulcerans CFU. By the second week of infection, mice developed swelling and erythema in the tails around the area of M. ulcerans inoculation. Although the swelling subsided after the third week of infection, there was persistent erythema in tails of all infected mice. During the course of treatment, one mouse from the clay treatment group was euthanized during the second week due to a secondary infection resulting in purulent erythema of the tail. Similarly, one mouse from the no treatment group was euthanized in the fourth week due to a secondary infection. Approximately three months post infection, affected areas of the mouse tails were either left untreated (no treatment group, n = 4) or treated with hydrated CB09 clay (clay treatment group, n = 4) for 22 days (Fig. 3). As seen in Fig. 3, mice in the no treatment group (panel a) had increased erythema and progression of ulcer when compared to the clay treatment mice (panel b). In the clay treatment group, three of the four mice had decreased erythema (Fig. 3). Tails collected from three of the four mice in the clay treatment group yielded no M. ulcerans growth after plating on supplemented M7H10 medium and incubation at 32 °C for eight weeks (Fig. 3c). In contrast, M. ulcerans was detected in the tails of untreated mice (Fig. 3c).
Gross morphology and bacterial detection of M. ulcerans-infected mouse tails with and without topical application of hydrated clay mixtures. Disease advancement and gross morphology of M. ulcerans-infected tails following 22 d of daily cleansing with sterile dH2O (no treatment) (a) or daily topical applications of hydrated antibacterial CB09 clay (b). After 22 d of topical treatment with the hydrated CB09 clay mixture, M. ulcerans survival was determined by collecting the tails from infected mice, processing the samples as described in the methods, and inoculating supplemented M7H10 agar to determine viable CFU per gram of tissue for each animal sample (c). Error bars represent the SD from three viable CFU determinations for each animal sample. The average (± SD) number of M. ulcerans cells, as determined from five infected animals on day 1 post-infection, is shown for comparison. The limit of detection is 10 CFU. NT, no treatment; CT, clay treatment. ***, p < 0.001; ****, p < 0.0001; ANOVA, Tukey’s multiple comparisons
Discussion
The World Health Organization recommends combination antibiotic therapy of rifampicin and streptomycin or rifampicin and clarithromycin with or without surgery (mainly debridement and skin grafting) for treating Buruli ulcer [12]. Since there is currently no specific vaccine against Buruli ulcer [21], an effective topical treatment option that is cost-friendly and easy to use could be welcomed in resource-poor settings where Buruli ulcer is endemic [14, 22]. Several topical therapeutic options for Buruli ulcer have been investigated, including 40 °C heat therapy, phenytoin, clay bandages, and creams containing nitrogen oxides [16, 23–27]. Heat treatment and creams delivering topical nitrogen oxides promoted healing in Buruli ulcer patients [23, 24, 28]. Nitric oxide was also shown to kill M. ulcerans in vitro [24, 25]. When applied therapeutically, phenytoin powder did not kill M. ulcerans but promoted healing through acceleration of fibrogenesis [27]. Hyperbaric oxygen at a partial pressure of 2.5 kPa was beneficial in healing mice infected with M. ulcerans [29].
In an uncontrolled and unpublished study, Buruli ulcer patients at a treatment center in Zouan-Hounien, Ivory Coast were treated with hydrated clay minerals [16]. The described debridement phase focused on hydrated illite clay-mediated removal of necrotic tissue and cleansing of the surrounding tissues. In the scarring phase, a hydrated poultice of montmorillonite clay was applied to the wounds and appeared to promote tissue regeneration [16]. After several months of clay applications, Buruli ulcer wounds were reportedly healed in most of the patients [16]. However, clay therapy was not further investigated in a controlled clinical trial.
In the present study, we investigated the effect of antibacterial clay minerals and clay aqueous leachates on M. ulcerans growth in vitro and the therapeutic effect on Buruli ulcer progression in vivo in a mouse model of M. ulcerans infection. Two of the five clays tested exhibited complete in vitro bactericidal activity against M. ulcerans within 7 days, while two clay mineral leachates demonstrated complete in vitro bactericidal activity within 28 days. In contrast, compared to incubation in water, some of the leachates appeared to provide a nutritional benefit to M. ulcerans. While the four CB samples are mineralogically similar, there are notable differences associated with the composition of ions bound to their surfaces [20]. For example, exchangeable copper concentrations ranged from 0.04 mM (CB09-L), 0.10 mM (CB08-L), 0.19 mM (CB10-L) to 3.18 mM (CB07-L), an approximate 80-fold difference in concentration across the four samples [20]. While we have established that clay-mediated killing of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA) is attributed to toxicity associated directly with released metal ions (Fe2+, Cu2+, and Zn2+) in an acidic environment [20, 30], it is unknown if these ions are important for killing M. ulcerans in vitro. Moreover, while 10 % suspensions of the CB clays completely killed E. coli and MRSA in vitro within 24 h [20], the CB10 clay (10 % suspension) reduced viability by ~1 log10 after 28 d, but did not completely kill M. ulcerans (Fig. 1). Further investigations associated with the chemical differences of the CB clays could provide some insight into why the CB10 clay exhibits minimal antibacterial activity against M. ulcerans.
The effects of hydrated clay minerals on M. ulcerans growth and wound progression in infected mice are likely due to a combination of both physical and chemical characteristics of clay minerals. Clays are small phyllosilicate minerals that are commonly grouped into three main classes – smectite, illite and kaolinite – based on their overall crystal layer structure and expandability. Smectite minerals, which include montmorillonite clay, exhibit high expansion (swelling) capabilities in the presence of water [31]. Conversely, illite and kaolinite are non-expanding clays [31]. We have previously assessed the ability of different hydrated clays to treat MRSA-infected superficial, cutaneous wounds in mice [32]. We demonstrated that natural and ion-exchanged illite clays performed best, as measured by bacterial load, inflammatory response and gross wound morphology with significant decreases in bacterial viability and dermatitis [32]. Topical application of kaolinite clay was the least effective, resulting in the lowest decrease in bacterial load and exhibiting severe dermatitis [32]. Although the CB09 clay mixture used in this study is a heterogeneous mixture of illite-smectite, montmorillonite, kaolinite, and non-clay minerals with different structural and expansion properties [32], daily application and removal of the clay poultices could diminish M. ulcerans growth due to an unfavorable chemical environment and could result in physical removal of M. ulcerans and/or mycolactone via adsorption. Mycolactone plays a central role in the pathogenesis of M. ulcerans and is thought to be responsible for most of the tissue destruction that occurs in a Buruli ulcer wound [2]. In macrophages, fibroblasts, and epithelial and endothelial cells, mycolactone blocks Sec61-dependent protein translocation into the endoplasmic reticulum, leading to degradation of aberrantly-located proteins [33], so reduction or removal of mycolactone during daily application and removal of clay poultices would be beneficial for promoting a proinflammatory response and wound healing.
Notably, there are several limitations of this study. The number of animals developing ulcers and available for topical treatment was small. Of the 25 animals infected with M. ulcerans, only 15 animals developed a visible ulcer within two to three months postinfection, suggesting that the 10 mice without a visible ulcer or lesion were insufficiently inoculated. After euthanizing five mice for quantitative assessment of M. ulcerans present in the tail wounds, 10 mice were available for treatment. Subsequently, one mouse in the no treatment group and one mouse in the clay treatment group developed superinfections, so only four mice remained in each group. While the three mice in the clay treatment group were negative for M. ulcerans growth, homogenate samples were not tested by PCR. Previous studies indicate that human tissue specimens deemed culture negative yielded positive PCR results, suggesting persistance of mycobacterial material [10, 34]. In the absence of PCR testing, it is unknown if mycobacterial material persisted in the mouse tail samples deemed culture negative. As determined by clinical improvement and reduction of bacterial burden, three mice were successfully treated with CB09 clay poultices. However, in the absence of systemic antibiotic therapy, it is possible that disease recurrence could occur at the original site of infection. A longer study is necessary to investigate recurrence-free healing of Buruli ulcer after topical treatment with hydrated antibacterial clay.
Conclusions
Several clays with demonstrated antibacterial activity against Gram-negative and Gram-positive pathogens also exhibit in vitro bactericidal activity against M. ulcerans. Mice treated with hydrated antibacterial clay healed M. ulcerans lesions in vivo, as assessed by changes in gross morphology and bacterial enumeration, suggesting that clay minerals or other similar adsorptive/absorptive materials may be of value in the complementary and integrative management of Buruli ulcer lesions. Since natural, mineralogically-identical clay samples exhibit variability in chemical composition and in vitro antibacterial activity [20], we are pursuing customized and nanostructured porous, absorptive materials, which offer standard composition and controlled antibacterial efficacy, for topical treatment of M. ulcerans infections.
References
Sizaire V, Nackers F, Comte E, Portaels F. Mycobacterium ulcerans infection: control, diagnosis, and treatment. Lancet Infect Dis. 2006;6:288–96.
George KM, Chatterjee D, Gunawardana G, Welty D, Hayman J, Lee R, et al. Mycolactone: a polyketide toxin from Mycobacterium ulcerans required for virulence. Science. 1999;283:854–7.
Einarsdottir T, Huygen K. Buruli ulcer. Hum Vaccin. 2011;7:1198–203.
Bamberger D, Jantzer N, Leidner K, Arend J, Efferth T. Fighting mycobacterial infections by antibiotics, phytochemicals and vaccines. Microbes Infect. 2011;13:613–23.
Silva MT, Portaels F, Pedrosa J. Pathogenetic mechanisms of the intracellular parasite Mycobacterium ulcerans leading to Buruli ulcer. Lancet Infect Dis. 2009;9:699–710.
van der Werf TS, Stienstra Y, Johnson RC, Phillips R, Adjei O, Fleischer B, et al. Mycobacterium ulcerans disease. Bull World Health Organ. 2005;83:785–91.
Nienhuis WA, Stienstra Y, Abass KM, Tuah W, Thompson WA, Awuah PC, et al. Paradoxical responses after start of antimicrobial treatment in Mycobacterium ulcerans infection. Clin Infect Dis. 2012;54:519–26.
Johnson PD, Stinear T, Small PL, Pluschke G, Merritt RW, Portaels F, et al. Buruli ulcer (M. ulcerans infection): new insights, new hope for disease control. PLoS Med. 2005;2:e108.
van der Werf TS, van der Graaf WT, Tappero JW, Asiedu K. Mycobacterium ulcerans infection. Lancet. 1999;354:1013–8.
Chauty A, Ardant MF, Marsollier L, Pluschke G, Landier J, Adeye A, et al. Oral treatment for Mycobacterium ulcerans infection: results from a pilot study in Benin. Clin Infect Dis. 2011;52:94–6.
Phillips RO, Sarfo FS, Abass MK, Abotsi J, Wilson T, Forson M, et al. Clinical and bacteriological efficacy of rifampin-streptomycin combination for two weeks followed by rifampin and clarithromycin for six weeks for treatment of Mycobacterium ulcerans disease. Antimicrob Agents Chemother. 2014;58:1161–6.
World Health Organization. Buruli ulcer (Mycobacterium ulcerans infection). Geneva: World Health Organization; 2015.
O'Brien DP, Hughes AJ, Cheng AC, Henry MJ, Callan P, McDonald A, et al. Outcomes for Mycobacterium ulcerans infection with combined surgery and antibiotic therapy: findings from a south-eastern Australian case series. Med J Aust. 2007;186:58–61.
Grietens KP, Boock AU, Peeters H, Hausmann-Muela S, Toomer E, Ribera JM. “It is me who endures but my family that suffers”: social isolation as a consequence of the household cost burden of Buruli ulcer free of charge hospital treatment. PLoS Negl Trop Dis. 2008;2:e321.
Yemoa A, Gbenou J, Affolabi D, Moudachirou M, Bigot A, Anagonou S, et al. Buruli ulcer: a review of in vitro tests to screen natural products for activity against Mycobacterium ulcerans. Planta Med. 2011;77:641–6.
World Health Organization. Draft report of the 5th WHO Advisory Group Meeting on Buruli ulcer. Geneva: World Health Organization; 2002.
Haydel SE, Remenih CM, Williams LB. Broad-spectrum in vitro antibacterial activities of clay minerals against antibiotic-susceptible and antibiotic-resistant bacterial pathogens. J Antimicrob Chemother. 2008;61:353–61.
Otto CC, Cunningham TM, Hansen MR, Haydel SE. Effects of antibacterial mineral leachates on the cellular ultrastructure, morphology, and membrane integrity of Escherichia coli and methicillin-resistant Staphylococcus aureus. Ann Clin Microbiol Antimicrob. 2010;9:26.
Cunningham TM, Koehl JL, Summers JS, Haydel SE. pH-Dependent metal ion toxicity influences the antibacterial activity of two natural mineral mixtures. PLoS One. 2010;5:e9456.
Otto CC, Haydel SE. Exchangeable ions are responsible for the in vitro antibacterial properties of natural clay mixtures. PLoS One. 2013;8:e64068.
Portaels F, Silva MT, Meyers WM. Buruli ulcer. Clin Dermatol. 2009;27:291–305.
Wansbrough-Jones M, Phillips R. Buruli ulcer: emerging from obscurity. Lancet. 2006;367:1849–58.
Junghanss T, Um Boock A, Vogel M, Schuette D, Weinlaeder H, Pluschke G. Phase change material for thermotherapy of Buruli ulcer: a prospective observational single centre proof-of-principle trial. PLoS Negl Trop Dis. 2009;3:e380.
Phillips R, Adjei O, Lucas S, Benjamin N, Wansbrough-Jones M. Pilot randomized double-blind trial of treatment of Mycobacterium ulcerans disease (Buruli ulcer) with topical nitrogen oxides. Antimicrob Agents Chemother. 2004;48:2866–70.
Phillips R, Kuijper S, Benjamin N, Wansbrough-Jones M, Wilks M, Kolk AH. In vitro killing of Mycobacterium ulcerans by acidified nitrite. Antimicrob Agents Chemother. 2004;48:3130–2.
Bechtle M, Chen S, Efferth T. Neglected diseases caused by bacterial infections. Curr Med Chem. 2010;17:42–60.
Adjei O, Evans MR, Asiedu A. Phenytoin in the treatment of Buruli ulcer. Trans R Soc Trop Med Hyg. 1998;92:108–9.
Meyers WM, Shelly WM, Connor DH. Heat treatment of Mycobacterium ulcerans infections without surgical excision. Am J Trop Med Hyg. 1974;23:924–9.
Krieg RE, Wolcott JH, Meyers WM. Mycobacterium ulcerans infection: treatment with rifampin, hyperbaric oxygenation, and heat. Aviat Space Environ Med. 1979;50:888–92.
Otto CC, Koehl JL, Solanky D, Haydel SE. Metal ions, not metal-catalyzed oxidative stress, cause clay leachate antibacterial activity. PLoS One. 2014;9:e115172.
Murray H. Structure and composition of the clay minerals and their physical and chemical properties. In: Applied clay mineralogy: Occurrences, processing and applications of kaolins, bentonites, palygorskitesepiolite, and common clays. The Netherlands: Elsevier Science; 2006. p. 7–32.
Otto CC, Kilbourne J, Haydel SE. Natural and ion-exchanged illite clays reduce bacterial burden and inflammation in cutaneous meticillin-resistant Staphylococcus aureus infections in mice. J Med Microbiol. 2015. doi: 10.1099/jmm.0.000195. [Epub ahead of print].
Hall BS, Hill K, McKenna M, Ogbechi J, High S, Willis AE, et al. The pathogenic mechanism of the Mycobacterium ulcerans virulence factor, mycolactone, depends on blockade of protein translocation into the ER. PLoS Pathog. 2014;10:e1004061.
Etuaful S, Carbonnelle B, Grosset J, Lucas S, Horsfield C, Phillips R, et al. Efficacy of the combination rifampin-streptomycin in preventing growth of Mycobacterium ulcerans in early lesions of Buruli ulcer in humans. Antimicrob Agents Chemother. 2005;49:3182–6.
Acknowledgments
This research was supported by Public Health Service grant AT004690 awarded to SEH from the NIH National Center for Complementary and Alternative Medicine. We thank Dr. Pamela Small from the University of Tennessee for providing the M. ulcerans strain 1615 and Jacquelyn Kilbourne, Jason Maarsingh, and Randy Boyles for assistance with animal experiments.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The authors declare that they have no competing interests.
Authors’ contributions
SA, SEH conceived and designed the experiments. SA performed the experiments. SA, SEH analyzed and interpreted the data. SA drafted the paper. SEH drafted and edited the paper. Both authors read and approved the final manuscript.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Adusumilli, S., Haydel, S.E. In vitro antibacterial activity and in vivo efficacy of hydrated clays on Mycobacterium ulcerans growth. BMC Complement Altern Med 16, 40 (2015). https://doi.org/10.1186/s12906-016-1020-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s12906-016-1020-5