Abstract
We report the fabrication and electrical performance of nanoscale vacuum channel transistor (NVCT) based on graphene. Ninety-nanometer-width vacuum nano-channel could be precisely fabricated with standard electron beam lithography process. The optimization and treatment of surface damage and adhesive residue on graphene are carried out by ultrasonic cleaning and thermal annealing. Additionally, in situ electric characteristics are directly performed inside a vacuum chamber of scanning electron microscope (SEM) with the nanomanipulator. By modulating the gate voltage, the NVCT could be switched from off-state to on-state, exhibiting an on/off current ratio up to 102 with low working voltages (< 20 V) and leakage current (< 0.5 nA). Furthermore, the nanoscale vacuum channel could enable to scale down the size of vacuum devices with high integration, making NVCT a promising candidate for high speed applications.
Avoid common mistakes on your manuscript.
Background
As the traditional Si-based technology gradually reaches the minimize limitation, many efforts have been made in the novel nanostructures or low-dimensional materials [1,2,3,4,5,6,7]. Among these prominent issues, transistors composed of nanoscale vacuum channels or known as the nanogap have been steadily attracting attentions [8,9,10]. Distinct from the early vacuum tubes with high-power consumption and difficulty for high integration, the nanogap structures are more prospective for the modern nanoelectronics. For conventional field effect transistors (FETs), the carriers may collide with the optical and acoustic phonons during the transport. Also, intrinsic graphene-based FETs were found to have an on–off current ratio less than 10 due to the lack of a bandgap, which are not suitable for modern integrated logic circuits. Intrinsically, electrons could ballistically travel through the nanoscale vacuum channel while suffering from collision or scattering in the semiconductors. And the vacuum nano-devices could be compatible with standard silicon process and combine the advantages of ballistic transport with miniaturization and integration. Thus, the nanoscale vacuum channel transistors (NVCTs) may output high frequency [9, 11], on/off ratio [12], or fast temporal response [13] with low working voltage. More importantly, the NVCT is proved to retain the advantages of the traditional vacuum tubes that operate normally in the extreme conditions, like exposure of ionizing radiation or high temperature [8]. The development of manufacturing technology can open up enormous opportunities for creating nanoscale vacuum channel, which might be compatible with modern integrated circuit (IC).
As a result, many attempts have been made to downscale the vacuum channel into nanogap and construct three terminal junctions. For instance, the vertical structure was widely utilized in the traditional vacuum electronic devices [14, 15]. Researchers have proposed different types of vertical NVCTs, where the electrons could emit directly out of plane, e.g., the slit-type vacuum transistor [16], or the Spindt-type NVCT [17]. However, the vertical structure could hardly be compatible with CMOS process. Compared with up–down structure, the planar NVCT are more prospective for future integration as the nanogap is variable with mask layout, including electron beam lithography (EBL) [18], focused ion beam (FIB) [19], or nanoimprinting [20]. Recently, planar-type vacuum transistors with nanogap channel have been fabricated with traditional semiconductor processing. Meyyappan et al. demonstrated a back-gate vacuum nano-channel transistor with standard silicon semiconductor processing, showing high-frequency switching characteristics with negligible leakage current [9]. In order to enhance the gate controllability, they further fabricated a surround-gate NVCT consists of sub-50-nm vacuum channel, and the device was proven to stand against ionizing radiation (proton and Gamma ray) and high temperature (200 °C) [8]. Wei et al. successfully fabricated a graphene-based vacuum transistor with better electrical performance than those graphene-based solid-state transistors. With superior on/off current ratio and low working voltages, the graphene NVCT are expected to be applied in severe environments such as electromagnetic radiation or extreme temperature [12]. Our previous work also precisely fabricated sub-30 nm aligned nanogap arrays with a well-controlled process [21]. The experimental results above indicate that the vacuum nano-devices, composed of the nanoscale vacuum channel, have the advantages of high response speed, low operating voltage, and superior switching performance and, more importantly, could be compatible with standard silicon process and combine the advantages of ballistic transport with miniaturization and integration. In particular, the nano-channel that smaller than the mean free path of electron can behave as vacuum without scattering or collision. Thus, the NVCT may function in low vacuum environment or even atmosphere, paving the way for a new generation of high performance, high-speed and low-cost vacuum electronic devices.
Here, we report on the fabrication of a graphene-based NVCT using optimized wet transfer method and standard EBL processing. Vacuum nano-channel of 90 nm has been achieved with a back-gate structure, which could modulate the electric field of emitting area and the electron transmission through emitter to collector. In situ electric characteristics are performed in the vacuum chamber of scanning electron microscope (SEM) with a nanomanipulator, showing the basic functionality with high on/off current ratio, low work voltage, and leakage current. Importantly, we believe that further downscaling of the channel size could fulfill high speed, high reliability, and low-cost applications for modern electronics.
Methods
Wet Transfer
In this report, large-scale graphene was directly grown on the Cu foil by thermal chemical vapor deposition (CVD) at 1020 °C with CH4 (20 sccm) and H2 (40 sccm) [22]. Among various transfer techniques for CVD-grown graphene, the mainstream method is the chemical transfer using PMMA as a support layer. Firstly, a PMMA layer was spin-coated on the graphene/Cu film and baked at 100 °C for 5 min to solidify PMMA. After etching in the FeCl3:HCl:H2O solution (molar mass ratio of 1:1:1) for 90 min, the remaining PMMA/graphene film was transferred and soaked in the deionized water for 5 min. This cleaning operation was repeated four or five times to fully remove the etching solution residue. Then, the PMMA/graphene film was transferred to the SiO2/Si substrates and dried at 100 °C for 5 min, removing the residual water between the membrane and substrate. Lastly, the sample was soaked in the acetone solution for an hour to remove the PMMA support layer.
However, we observed that the traditional wet transfer process could lead to cracks or wrinkles on the graphene surface with massive PMMA residue, which may greatly influence the electrical performance afterwards. As a result, we further utilized the ultrasound [23] to clean the SiO2/Si substrates with a post-annealing process based on the traditional wet transfer method, as shown in Fig. 1. Combining with 1-h ultrasonic treatment (power of 100 W and frequency of 50 Hz), both hydrophilicity and flatness of the substrate were enhanced, that a 2 cm × 2 cm graphene membrane could be continuously transferred to the substrate (Fig. 2a). In addition, we introduce a post-thermal annealing process [24, 25] to effectively remove the PMMA residue, with a mixing flow of Ar2 (100 sccm) and H2 (40 sccm) at 300 °C for 3 h. The details and discussion of optimization process are shown in Additional file 1.
Figure 2a clearly shows the optical photograph of the produced 2 cm × 2 cm graphene film on SiO2/Si substrate, indicating the excellent transparence of graphene. The graphene/SiO2 was characterized by field emission scanning electron microscope (Quanta 200 FEI), as is shown in Fig. 2b. The SEM image demonstrates that the graphene was continuous and uniformly transferred onto the substrate with few cracks or winkles. Moreover, Raman spectroscopy (514-nm laser excitation) is commonly used to evaluate the quality of the transferred graphene. Figure 2c shows the typical Raman spectrum of the graphene on SiO2/Si substrate. With unconspicuous D peak located at 1349 cm−1, the G and 2D peaks could be clearly observed at 1587 and 2685 cm−1 with a 2D/G ratio of 2.19. The low intensity of the D peak demonstrates that few additional defects were generated during the transfer process. The 2D peak is narrow with ratio IG/I2D below 0.5, which indicates the basic features of single-layer graphene. The Raman spectrum results show high quality and continuity of the graphene with our optimized chemical transfer method.
Fabrication of Graphene-Based Nanoscale Vacuum Channel Transistor
Figure 3 illustrates the process of fabricating graphene-based nanoscale vacuum channel transistor. Firstly, the 100-nm SiO2 insulator was deposited by the PECVD (plasma enhanced chemical vapor deposition) method, with graphene chemical transferred onto the substrate subsequently. Gold contacts were deposited on graphene by electron beam evaporation (5 nm Cr and 80 nm Au) with a subsequent lift-off process. After PMMA spin-coated on the surface of graphene, the nano-vacuum channel was formed by standard EBL (Vistec, EBPG 5000plus ES) with a followed O2-plasma etching. The nanogaps were positioned to cut the graphene membrane into two halves. The samples were cleaned with acetone, isopropyl alcohol, and deionized water, respectively. Lastly, the samples were processed via 1 h of annealing at 300 °C with the flow of hydrogen (40 sccm) and argon (100 sccm). Figure 4a shows the SEM image of graphene-based NVCT, with Au contacts on both sides of graphene emitter and collector. And Fig. 4b demonstrates a zoom-in of the NVCT, showing approximately 90-nm-width vacuum channel that enables the electrons to ballistic transport through the nanogap.
Results and Discussion
To study the mechanism of electron transport through the vacuum nano-channel, the in-situ field emission measurements are performed with a nanomanipulator in the vacuum chamber of SEM (base pressure of ~ 10−4 Pa), as shown in Fig. 5a. The nanomanipulator system was developed for the real-time observation and measurement of field emission in vacuum environment, which could be considered as the probe station inside the SEM chamber and enable to locate or test the samples. Also, the in situ test method could reflect the electric properties of the graphene-based NVCT more objectively and serve the design of nanogap structure better. The nanomanipulator is equipped with cylinder-shaped tungsten microtips and connected to Keithely 2400 digital source measure unit. In order to avoid vacuum breakdown and damage of graphene, a current limit of 10 μA was imposed during the testing process. A bias was applied between the separated graphene films and increased manually at a voltage step of 0.1 V, that the electrons are emitted laterally from the graphene edges.
Figure 5b, c shows the band diagram of graphene-based NVCT at on- and off-states, respectively. Generally, the gate voltage applied at the back-gate could modulate the vacuum barrier between emitter and collector. When the gate voltage is less than the threshold voltage, the barrier is too broad to field tunneling for low-energy electrons. Also, the electrons might receive scattering by the impurities on the SiO2 surface and trapped to the drawbacks of the emitter. As the gate voltage increases beyond the threshold voltage, the width of the barrier is compressed accordingly. The electrons could overcome the narrowed barrier via the F-N tunneling, leading to the on-state of the NVCT. Moreover, the tunability of graphene energy band by gate voltage may be another contribution, as electrical conductivity of single-layer graphene can be modulated by gate voltage. As the gate voltage increases, the Fermi level EF shift to the conduction band, thus, enhance the electron density of the graphene surface and improve the emission current.
To further explore the electric properties and extend the applications of graphene-based NVCT, the output (Vc vs. Ic) and transfer (Vg vs. Ic) characteristics are investigated, as is shown in Fig. 6a, b, respectively. Similar to the typical graphene-based field effect transistors (FETs), the graphene-based NVCT could be modulated in off-state or on-state by the gate voltage. Figure 6a illustrates the typical output characteristic with gate voltage Vg increasing from 0 to 15 V. It is noticed that no obvious electron emission Ic were measured when Vg is less than the threshold voltage, indicating that the NVCT is in the off-state. As the Vg increases and exceed the threshold voltage, the NVCT switches to the on-state that Ic exhibit an exponentially growth with collector voltage Vc. The transfer characteristic with Vc = 7.5 V is shown in Fig. 6b in liner (red line) and exponential (black line) scale, respectively. We can see that the threshold voltage is about 6 V with a fixed collector voltage of 7.5 V, and Ic grows rapidly when Vg is larger than the threshold voltage. Also, the curves plotted in exponential scale (black line) exhibit an on/off ratio exceeding 102, which is superior to the intrinsic graphene FETs due to the lack of bandgap. Wei et al. supposes that the electron emission properties are related to the surface topography of graphene or the distance from emitter to collector [12]. Thus, further narrowing of the nanogap width or modifying the structure may enable to enhance the on/off current ratio and electron emission.
To rule out the possibility of electron emission through the insulator, we also detect the leakage current during the measurement. Low and negligible leakage current (less than 0.5 nA) is observed, owing to the 100-nm thick SiO2 insulator. With a back-gate structure, however, the insulator plays a crucial role in the device. A thin insulator could enhance the modulation ability of back-gate while the insulator should be strong enough to avoid breakdown. As a result, optimizing the insulator material to decrease the thickness and improve the breakdown strength, e.g., utilizing Al2O3 or HfO2 as the high-k gate insulator [26,27,28,29,30,31], could indeed enhance the electric performance of the NVCT. Besides, the stability test of the NVCT at different vacuum degrees is shown in Fig. 6d with a fixed collector and gate voltage set as 7.5 V and 15 V, respectively. With the high thermal conductivity of graphene, the decrease of emission current induced by Joule heating is weakened, showing no obvious degradation and fluctuation at a vacuum degree of ~ 10−4 Pa. However, a slowly current reduction is observed in low vacuum (~ 10−1 Pa). The inset clearly exhibits the fracture and cracks on the graphene surface after stability test. It is supposed that the Joule heat aggregates at the graphene emitter and damages the surface morphology, leading to the emission current degradation in low vacuum [32, 33]. We hope that it could be solved in the further work, so that widens the application scope and occasion of the graphene-based NVCT.
To compare the performances of nanoscale vacuum channel transistors based on different types or materials, the channel width, operating voltage, working current, on/off ratio, gate current, and stability test are listed in Table 1. Obviously, the Si-based vacuum channel transistors (back-gate and gate-all-around) illustrate better performance than the graphene-based devices. By comparing the gate current, it can be seen that the energy consumption of our graphene-based NVCT are superior to the other devices. Meanwhile, the 90-nm-width vacuum channel could enable to scale down the size of vacuum devices and fulfill on-chip NVCT with multiple functionalities. However, the performances of on/off ratio or working current of our device are far behind with other structures and still need further improvement on the optimization of fabrication process and structure parameters. We hope that it could be presented in a future publication.
Conclusion
In conclusion, a graphene-based NVCT was successfully fabricated with standard CMOS process. We utilized the ultrasound to clean the SiO2/Si substrates with a post-annealing process based on the traditional wet transfer method that a 2 cm × 2 cm graphene membrane could be continuously transferred to the substrate. The electrical properties of NVCT were investigated. By modulating the gate voltage, the NVCT could be switched from off-state to on-state, exhibiting an on/off current ratio up to 102 with low working voltages (< 20 V) and leakage current (< 0.5 nA). Further improvement of the graphene-based NVCT by structure optimization may pave the way for high speed, high reliability, and low cost applications for modern vacuum nanoelectronics.
Abbreviations
- CVD:
-
Chemical vapor deposition
- EBL:
-
Electron beam lithography
- FET:
-
Field effect transistor
- FIB:
-
Focused ion beam
- IC:
-
Integrated circuit
- NVCT:
-
Nanoscale vacuum channel transistor
- PECVD:
-
Plasma-enhanced chemical vapor deposition
- PMMA:
-
Polymethyl methacrylate
- SEM:
-
Scanning electron microscope
References
Han N, Wang Y, Yang ZX, Yip S, Wang Z, Li DP, Hung TF, Wang FY, Chen YF, Ho JC (2017) Controllable III-V nanowire growth via catalyst epitaxy. J Mater Chem C 5(18):4393–4399
Hisamoto D, Lee WC, Kedzierski J, Takeuchi H, Asano K, Kuo C, Anderson E, King TJ, Bokor J, Hu CM (2000) FinFET - a self-aligned double-gate MOSFET scalable to 20 nm. Ieee Transactions on Electron Devices 47(12):2320–2325
Lin YM, Dimitrakopoulos C, Jenkins KA, Farmer DB, Chiu HY, Grill A, Avouris P (2010) 100-GHz transistors from wafer-scale epitaxial graphene. Science 327(5966):662–662
Wang FY, Yip S, Dong GF, Xiu F, Song LF, Yang ZX, Li DP, Hung TF, Han N, Ho JC (2017) Manipulating III-V nanowire transistor performance via surface decoration of metal-oxide nanoparticles. Adv. Mater. Interfaces 4(12):8
Wang FY, Yip S, Han N, Fok K, Lin H, Hou JJ, Dong GF, Hung T, Chan KS, Ho JC (2013) Surface roughness induced electron mobility degradation in InAs nanowires. Nanotechnology 24(37):375202
Wang Y, Yang ZX, Wu XF, Han N, Liu HY, Wang SB, Li J, Tse W, Yip S, Chen YF, Ho JC (2016) Growth and photovoltaic properties of high-quality GaAs nanowires prepared by the two-source CVD method. Nanoscale Res Lett 11:7
Xia FN, Farmer DB, Lin YM, Avouris P (2010) Graphene field-effect transistors with high on/off current ratio and large transport band gap at room temperature. Nano Lett 10(2):715–718
Han JW, Moon DI, Meyyappan M (2017) Nanoscale vacuum channel transistor. Nano Lett 17(4):2146–2151
Han JW, Oh JS, Meyyappan M (2012) Vacuum nanoelectronics: back to the future?-gate insulated nanoscale vacuum channel transistor. Appl Phys Lett 100(21):213505
Srisonphan S, Jung YS, Kim HK (2012) Metal-oxide-semiconductor field-effect transistor with a vacuum channel. Nat Nanotechnol 7(8):504–508
Xu J, Wang QL, Qi ZY, Zhai YS, Zhang XB (2015) Study on the frequency characteristics of nanogap electron devices. J Appl Phys 117(20):204504
Wu GT, Wei XL, Zhang ZY, Chen Q, Peng LM (2015) A graphene-based vacuum transistor with a high ON/OFF current ratio. Adv Funct Mater 25(37):5972–5978
Wu GT, Wei XL, Gao S, Chen Q, Peng LM (2016) Tunable graphene micro-emitters with fast temporal response and controllable electron emission. Nat Commun 7:11513
Leong M, Doris B, Kedzierski J, Rim K, Yang M (2004) Silicon device scaling to the sub-10-nm regime. Science 306(5704):2057–2060
Spindt CA, Holland CE, Rosengreen A, Brodie I (1991) Field-emitter arrays for vacuum microelectronics. Ieee Transactions on Electron Devices 38(10):2355–2363
Park IJ, Jeon SG, Shin C (2014) A new slit-type vacuum-channel transistor. Ieee Transactions on Electron Devices 61(12):4186–4191
Guerrera SA, Akinwande AI, Ieee, He channel nanotransistors - towards “vacuum-less” empty state electronics. In 2016 29th International Vacuum Nanoelectronics Conference, 2016
Manheller M, Trellenkamp S, Waser R, Karthäuser S (2012) Reliable fabrication of 3 nm gaps between nanoelectrodes by electron-beam lithography. Nanotechnology 23(12):125302
Cui A, Liu Z, Dong H, Wang Y, Zhen Y, Li W, Li J, Gu C, Hu W (2015) Single grain boundary break junction for suspended nanogap electrodes with gapwidth down to 1–2 nm by focused ion beam milling. Adv Mater 27(19):3002–3006
Cao Y, Steigerwald ML, Nuckolls C, Guo XF (2010) Current trends in shrinking the channel length of organic transistors down to the nanoscale. Adv Mater 22(1):20–32
Xu J, Wang QL, Tao Z, Zhai YS, Chen GDA, Qi ZY, Zhang XB (2017) High-quality and stable electron emission device with Sub-30-nm aligned nanogap arrays. Ieee Transactions on Electron Devices 64(5):2364–2368
Xu J, Wang QL, Tao Z, Qi ZY, Zhai YS, Wu SQ, Zhang XB, Lei W (2016) Field emission of wet transferred suspended graphene fabricated on interdigitated electrodes. ACS Appl Mater Interfaces 8(5):3295–3300
Yuan LY, Tao YT, Chen J, Dai JJ, Song T, Ruan MY, Ma ZW, Gong L, Liu K, Zhang XH, Hu XJ, Zhou J, Wang ZL (2011) Carbon nanoparticles on carbon fabric for flexible and high-performance field emitters. Adv Funct Mater 21(11):2150–2154
Pirkle A, Chan J, Venugopal A, Hinojos D, Magnuson CW, Mcdonnell S, Colombo L, Vogel EM, Ruoff RS, Wallace RM (2011) The effect of chemical residues on the physical and electrical properties of chemical vapor deposited graphene transferred to SiO2. Appl Phys Lett 99(12):122108
Xu J, Wang QL, Tao Z, Qi ZY, Zhai YS, Lei W, Zhang XB (2016) Enhanced electron emission of directly transferred few-layer graphene decorated with gold nanoparticles. RSC Adv 6(81):78170–78175
Kim JM, Lee JW, Kim JK, Ju BK, Kim JS, Lee YH, Oh MH (2004) An organic thin-film transistor of high mobility by dielectric surface modification with organic molecule. Appl Phys Lett 85(26):6368–6370
Lee J, Kim JH, Im S (2003) Pentacene thin-film transistors with Al2O3+x gate dielectric films deposited on indium-tin-oxide glass. Appl Phys Lett 83(13):2689–2691
Lim JW, Koo JB, Yun SJ, Kim HT (2007) Characteristics of pentacene thin film transistor with Al2O3 gate dielectrics on plastic substrate. Electrochemical and Solid State Letters 10(10):J136–J138
Tardy J, Erouej M, Deman AL, Gagnalre A, Teodorescu V, Blanchin MG, Canut B, Barau A, Zaharescu M (2007) Organic thin film transistors with HfO2 high-k gate dielectric grown by anodic oxidation or deposited by sol-gel. Microelectron Reliab 47(2–3):372–377
Wang FY, Song LF, Zhang HC, Meng Y, Luo LQ, Xi Y, Liu L, Han N, Yang ZX, Tang J, Shan FK, Ho JC (2018) ZnO nanofiber thin-film transistors with low-operating voltages. Advanced Electronic Materials 4(1):1700336
Zhang HC, Meng Y, Song LF, Luo LQ, Qin YB, Han N, Yang ZX, Liu L, Ho JC, Wang FY (2018) High-performance enhancement-mode thin-film transistors based on Mg-doped In2O3 nanofiber networks. Nano Res 11(3):1227–1237
Li X, Kong BD, Zavada JM, Kim KW (2011) Strong substrate effects of Joule heating in graphene electronics. Appl Phys Lett 99(23):233114
Wei XL, Golberg D, Chen Q, Bando Y, Peng LM (2011) Phonon-assisted electron emission from individual carbon nanotubes. Nano Lett 11(2):734–739
Acknowledgements
This work was supported by the National Natural Science Foundation of China (Grant Nos. 61775035, 61571124) and Natural Science Foundation of Jiangsu Province (Grant Nos. BK20171365, BK20150632).
Availability of Data and Materials
We declared that materials described in the manuscript, including all relevant raw data, will be freely available to any scientist wishing to use them for noncommercial purposes, without breaching participant confidentiality.
Author information
Authors and Affiliations
Contributions
All the authors listed are from the Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China.
ZXB designed the experimental content. XJ wrote the paper, finished the experiments, and analyzed the data. GZY and YWX helped to prepare the samples. WQL revised the paper. All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Additional File
Additional file 1:
Figure S1. The schematic diagram and optical picture of the CVD system. Figure S2. The whole structure of the devices. Figure S3. Schematic diagrams of the carriers in solid-state device and the electrons in the vacuum nanogap. (DOCX 719 kb)
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Xu, J., Gu, Z., Yang, W. et al. Graphene-Based Nanoscale Vacuum Channel Transistor. Nanoscale Res Lett 13, 311 (2018). https://doi.org/10.1186/s11671-018-2736-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s11671-018-2736-6