Abstract
In recent years, monodispersed magnetic nanoparticles with a core/shell structure are expected for their wide applications including magnetic fluid, recoverable catalysts, and biological analysis. However, their synthesis method needs numerous processes such as solvent substitution, exchange of protective agents, and centrifugation. A simple and rapid method for the synthesis of monodispersed core-shell nanoparticles makes it possible to accelerate their further applications. This paper describes a simple and rapid one-pot synthesis of core (CoFe2O4)-shell (Ag) nanoparticles with high monodispersity. The synthesized nanoparticles showed plasmonic light absorption owing to the Ag shell. Moreover, the magnetic property of the nanoparticles had a soft magnetic behavior at room temperature and a hard magnetic behavior at 5 K. In addition, the nanoparticles showed high monodispersity with a low polydispersity index (PDI) value of 0.083 in hexane.
Avoid common mistakes on your manuscript.
Background
Over the last decade, magnetic nanoparticles with a core/shell structure have gained a lot of attention in a wide range of fields from engineering to medical sciences owing to the applications of magnetic fluids [1, 2], magnetic separation [1,2,3], recoverable catalysts [1, 2, 4,5,6,7], drug delivery system [1, 8,9,10], and an enhanced magnetic resonance imaging (MRI) contrast agents [7, 9,10,11].
Among the magnetic nanoparticles, a spinel ferrite nanoparticle has frequently been employed as a magnetic core because of its excellent magnetic and electrical properties [12]. Particularly, cobalt ferrite (CoFe2O4) nanoparticles have a large maximum coercive field (Hc), even with a small size as well as a remarkable chemical stability and a mechanical hardness [13,14,15,16,17]. Although many different chemical methods have been developed to fabricate CoFe2O4 nanoparticles, the thermal decomposition method has recently been employed one of the most promising procedures to obtain highly, structurally, and morphologically controlled nanoparticles with a high crystallinity [13, 17, 18].
Magnetic nanoparticles with a core/shell structure have attracted a great deal of attention due to their multifunctionality including optical, electronic, and magnetic properties [6, 8, 10, 19]. In particular, the Au shell-coated magnetic nanoparticles have widely been studied in order to provide not only the surface plasmon properties but also a reactive surface for strong binding to organic compounds containing thiol groups [3, 20]. Typically, an approach of combined two-step thermal decomposition process can continuously synthesize from cores to shells, resulting in the formation of Au-coated magnetic nanoparticles with a high monodispersity [20]. On the other hand, Ag shell-coated magnetic nanoparticles have not been synthesized by this approach in spite of excellent plasmonic properties, a higher extinction coefficient, a sharper extinction band, a higher light scattering-to-extinction effect, and strong local electromagnetic fields of Ag shells.
In this study, we succeeded in synthesizing Ag shell-coated CoFe2O4 nanoparticles by a simple and rapid one-pot method involving two thermal decomposition processes. It was confirmed that our synthesized nanoparticles formed a precise core-shell structure, as compared with those synthesized in a previous paper [21, 22]. In addition, we demonstrated that the CoFe2O4@Ag showed the localized surface plasmon resonance (LSPR) originated from the Ag shells. In the investigation of the magnetic property, this core-shell nanoparticle revealed soft magnetic behavior with Hc of 70 Oe at 300 k and hard magnetic behavior with 11 k Oe at 5 K.
Method/Experimental
Material
Fe(acac)3 and Co(acac)2 were purchased from Tokyo Chemical Industry. Diphenyl ether, oleylamine (OAm), and silver(I) acetate were purchased from Wako. Oleic acid (OA) was purchased from Kanto Chemical.
Synthesis of CoFe2O4@Ag
The CoFe2O4@Ag were synthesized by the two-step high thermal decomposition method (Scheme 1). Fe(acac)3 (0.353 g, 1 mmol), Co(acac)2 (0.129 g, 0.5 mmol), and OA (3.39 g, 12 mmol) were dissolved in 30 mL of diphenyl ether, which was pre-treated by heating at 180 °C for 30 min. A mixture was heated at 180 °C for 16 h under vigorous stirring. The solution color gradually turned from dark red to fine black. After cooling at room temperature, a mixture of OA (1.48 g, 5.2 mmol), OAm (8.13 g, 30.4 mmol), and silver acetate (0.61 g, 3.6 mmol) dissolved in 100 mL of diphenyl ether was added to the mixture, followed by heating at 180 °C for 1.5 h. The color of the mixture further turned to metallic dark purple during heating. After cooling, 400 mL of methanol as a poor solvent was added to the mixture solution, followed by centrifugation (5000 rpm, 5 min) and the redispersion in 60 mL of hexane. Although the nanoparticles dispersed in the solution might be able to be magnetically separated, it takes time to recover. The centrifugation process was repeated several times to remove the unreacted precursors. Finally, by centrifuging the colloidal hexane solution (14,000 rpm, 20 min), the resulting precipitates were removed. The net weight of nanoparticles by this method is about 60 mg as 1 mg/mL of the colloidal hexane solution. The CoFe2O4 nanoparticles as a reference were prepared by performing only step 1 in Scheme 1.
Characterization and Calculation
The morphology of nanoparticles was observed using field-emission transmission electron microscopy (TEM) (Hitachi, Ltd., FE 2000). The crystal structures were measured with X-ray diffraction (XRD) (PANalytical, X’Pert PRO MPD) in the range of 2θ = 20° to 80° by using the CuK α-ray. Element composition of nanoparticles was analyzed by X-ray photoelectron spectroscopy (XPS) (KARATOS ESCA 3400). Etching operation was performed with Ar ion gun. The magnetization measurements were performed by a superconducting quantum interference device (SQUID) (Cryogenic, S700X-R). The optical properties were measured on a UV-visible spectrophotometer (Jasco, V-670). Dynamic light scattering (DLS) (Malvern, zetasizer-nano-zs) was measured with 633-nm laser line. For the optical properties of our synthesized core-shell nanoparticles, the experimental data are supported by Mie scattering calculations which were carried out by Bohren and Huffman’s solution [23] using the MATLAB code written by Mätzler [24]. Dielectric functions for the Ag were taken from Reference [25].
Results and Discussion
Figure 1 shows the TEM images of CoFe2O4 nanoparticles and CoFe2O4@Ag core-shell nanoparticles. As shown in the insets of Fig. 1, the size distributions of both nanoparticles are narrow. The average sizes (mean ± S.D.) of them are 3.5 ± 0.76 and 5.5 ± 0.77 nm, respectively. From these results, the thickness of Ag shell was estimated to be ca. 1 nm. Aggregation of CoFe2O4 particles occurred but not for CoFe2O4@Ag nanoparticles. This is possibly due to a higher surface energy of the CoFe2O4 nanoparticles than that of the CoFe2O4@Ag nanoparticles because of a larger surface-to-volume ratio of the CoFe2O4 nanoparticles [26]. Also, residual CoFe2O4 nanoparticles (cores) could not be observed in the sample of CoFe2O4@Ag. This result suggests that almost all the cores are uniformly coated with the silver Ag shell.
Figure 2 presents the XRD patterns for the CoFe2O4 and the CoFe2O4@Ag nanoparticles. The diffraction peaks of CoFe2O4 nanoparticles at 2θ = 30.50°, 35.75°, 43.50°, 53.8°, 57.5°, 63.0°, and 74.4° show the formation of a single crystallographic phase, which can be indexed as the cubic structure of spinel oxides [17]. On the other hand, the diffraction peaks of CoFe2O4@Ag at 2θ = 38.42°, 44.50°, 64.91°, 77.75°, and 81.83° correspond to those of the standard face-centered cubic (fcc) phase of Ag [10]. The intensity of the diffraction peaks of CoFe2O4 are relatively weak, and its main peak overlaps with Ag; therefore, all emerge into those of Ag. The crystallite size was calculated from the full width at half maximum (FWHM) of the highest intensity diffraction peak, which is based on the Debye-Scherrer equation,
where t is the crystallite size, l is the wavelength of Cu-Ka radiation, b is the FWHM, and y is the diffraction angle of the strongest peak. The crystal sizes evaluated from the diffraction patterns were 7.1 and 3.6 nm for CoFe2O4 nanoparticles and CoFe2O4@Ag nanoparticles, respectively. The crystal size of CoFe2O4 nanoparticles was observed to be larger than the size of TEM because of the residue of CoFe2O4 nanoparticles out of size distribution, which could not be removed by centrifugation in hexane. On the other hand, the crystal size from XRD showed an agreement in CoFe2O4@Ag nanoparticles considering that the crystal size of Ag shell has to be smaller than the size of TEM. The size of the colloid after the silver coating reaction enables to select by centrifugation due to its heavyweight in hexane.
To evaluate the internal composition of the obtained nanoparticles with a core-shell structure, the nanoparticle surfaces were etched using Ar ion gun in the chamber [27]. According to the previous studies, when the particles had a precise core-shell structure, the peak intensity of the element contained in the core should be increased as the etching progresses. As shown in Fig. 3a–d, to determine the surface composition of CoFe2O4@Ag nanoparticles, we measured the XPS spectra before the Ar ion etching. In the initial surfaces, the peek C (1 s) were easily observed in nanoparticles due to the presence of the protective agent on the surface of the nanoparticles (Fig. 3a). The spectrum of C (1 s) was decomposed, and a peak derived from C-O-C was observed, which is derived from oleic acid modified on the surface. While the peaks of Ag(3d) were observed, those of Fe(2p) and Co(2p) could not be observed, indicating that the core was completely covered with the Ag shells (Fig. 3b–d). On the other hand, the peaks of Fe(2p) and Co(2p) were observed in the nanoparticles after the etching operation with argon ion (Fig. 3f, g). The peaks of Fe(2p) and Co(2p) are decomposed and can be assigned to Fe2+, Fe3+, Co2+, and Co3+, respectively. The formation of both types of charge carriers results from the loss of oxygen during the high-temperature reaction process [28, 29]. For the charge compensation, a part of Fe3+ is converted to Fe2+, and a part of Co2+ is converted to Co3+. Furthermore, each of the Ag(3d) peak after the etching can be decomposed into two peaks (Fig. 3h), due to the difference in electronic state at between the nanoparticle surfaces and the inside of the shells. These results indicate that the precise core-shell structure is formed.
The magnetic hysteresis loops of films made up of the CoFe2O4 and the CoFe2O4@Ag nanoparticles were measured at 300 and 5 K, as shown in Fig. 4. These hysteresis loops were normalized as the magnetic susceptibility per unit cobalt weight. Due to the analysis of the crystallographic phase using XRD (Fig. 2), the crystalline densities of CoFe2O4 and CoFe2O4@Ag nanoparticles were estimated to be 5.3 and 10.5 g/cm3, respectively. Also, the volumes of CoFe2O4 and CoFe2O4@Ag nanoparticles were calculated using the results from the TEM observation (Fig. 1). CoFe2O4 nanoparticles showed a superparamagnetic behavior at room temperature (Fig. 4a). As mentioned by López-Ortega et al. [17], the CoFe2O4 nanoparticles with the size below 20 nm showed the superparamagnetic behavior at room temperature. The magnetic properties of each sample at the two temperatures are summarized in Table 1. Magnetic saturation (Ms) of the CoFe2O4 nanoparticles was 11 (emu/g CoFe2O4), which is lower than the previous results [17, 30, 31]. This is possibly owing to the smaller particle size obtained in this study. On the other hand, the Ms of the CoFe2O4@Ag was even smaller with a value of 3.3 (emu/g, CoFe2O4). As mentioned in the previous literature for Fe3O4@Ag nanoparticles [8,9,10, 32,33,34], the Ms of CoFe2O4@Ag decreases possibly due to the diamagnetic contribution of the Ag shell. Moreover, CoFe2O4@Ag showed 77 Oe, which is high Hc value at 300 k. The Hc of the CoFe2O4@Ag is also different from that of CoFe2O4 under the low temperature (Fig. 4b). Both of the nanoparticles exhibited ferromagnetism at 5 K despite their relatively small sizes. On the basis of the data near zero magnetization, the value of Hc increases for CoFe2O4@Ag nanoparticles (7 k Oe for CoFe2O4 and 11 k Oe for CoFe2O4@Ag). This interesting behavior has also been observed in other core-shell nanoparticles such as Fe@Ag [10] and Fe3O4@Au nanoparticles [5]. Taking these facts into account, the increase of the Hc of the CoFe2O4@Ag nanoparticles can be derived from a less-effective coupling of magnetic dipole moment [5, 20].
Next, optical properties of the CoFe2O4 nanoparticles were investigated by UV-visible spectral measurements. Ag nanoparticles are known to show significant light extinction in the visible region due to the excitation of localized surface plasmon resonance (LSPR) by the coupling of the irradiated light with the coherent oscillation of surface electrons within the Ag nanoparticles. Although the CoFe2O4 nanoparticles showed no LSPR extinction band in the visible region (Fig. 5), the colloidal solution of our core-shell type CoFe2O4@Ag nanoparticles showed a sharp extinction peak at 416 nm. This can be attributed to the plasmon absorption (dipole mode) of the Ag shell, which is theoretically supported by the Mie theory (see Additional file 1). This interesting behavior has been observed for Fe@Ag nanoparticles [10] and Co@Ag nanoparticles [7]. In addition, the spectroscopic properties of the CoFe2O4@Ag nanoparticles were not changed for 1 month, indicating the superior stability of the nanoparticles under air.
The colloidal stability of the CoFe2O4 and the CoFe2O4@Ag nanoparticles was evaluated by measuring the size distributions of the nanoparticles in hexane using DLS (Fig. 6). The average sizes of the CoFe2O4 and CoFe2O4@Ag nanoparticles were measured to be 19.67 and 9.27 nm, respectively. The sizes of these nanoparticles obtained from TEM, XRD, and DLS measurements are summarized in Table 2. The main difference in sizes measured by these two techniques is due to the presence of an adsorption layer consisting of the OA and OAm on the surface of the particles [35]. Organic compounds such as OA and OAm did not appear in TEM images due to the electron permeability (Fig. 1). Given that the chain lengths of the OA and the OAm are roughly 2 nm [36, 37], the size of CoFe2O4@Ag estimated by the TEM is slightly (ca. 4 nm) larger than that by the DLS. On the other hand, it is reasonable that the size of CoFe2O4 by the DLS is far larger than that estimated from this assumption. These results suggest that CoFe2O4 nanoparticles are agglomerated in hexane. This factor includes not only the size effect of the particles described above but also the low affinity between the CoFe2O4 surfaces and the protective agents. The tendency of agglomeration of the CoFe2O4 may not only due to the size effect of the particles described above but also due to the low affinity between the CoFe2O4 surfaces and the protective agents. Precipitation of CoFe2O4 nanoparticles was observed much more frequently than CoFe2O4@Ag nanoparticles in the process of redispersion by increasing the number of methanol washing. The high monodispersity of CoFe2O4@Ag is strongly supported by the low polydispersity index (PDI) obtained by the DLS measurements [38]. These results indicate that the coating with Ag adds not only an optical function but also the stability in solution to the CoFe2O4 nanoparticles.
Conclusions
The CoFe2O4@Ag nanoparticles synthesized by a simple and rapid one-pot process were found to be formed on having a uniform core-shell structure with a narrow size distribution from TEM images (Fig. 6). Also, these nanoparticles showed a multifunctionality consisting of the plasmonic light extinction property and a superparamagnetic behavior at room temperature. Furthermore, the core-shell nanoparticles showed higher Hc than CoFe2O4 nanoparticles at 5 K and 300 k. In addition, these nanoparticles maintained high monodispersity in an organic solvent. The uniform nanoparticles synthesized by the simple process have a great potential in various fields owing to the multifunctionality as well as the stability.
Abbreviations
- DLS:
-
Dynamic light scattering
- fcc:
-
Face-centered cubic
- H c :
-
Coercive field
- M s :
-
Magnetic saturation
- OA:
-
Oleic acid
- OAm:
-
Oleylamine
- PDI:
-
Low polydispersity index
- SQUID:
-
Superconducting quantum interference device
- TEM:
-
Field-emission transmission electron microscopy
- XPS:
-
X-ray photoelectron spectroscopy
- XRD:
-
X-ray diffraction
References
Park HY, Schadt MJ, Wang L, Lim IIS, Njoki PN, Kim SH, Jang MY, Luo J, Zhong CJ (2007) Fabrication of magnetic core @Shell Fe Oxide@ Au nanoparticles for interfacial bioactivity and bio-separation. Langmuir. 23(17):9050–9056. https://doi.org/10.1021/la701305f
Wu W, He Q, Jiang C (2008) Magnetic iron oxide nanoparticles: Synthesis and surface functionalization strategies. Nanoscale Res Lett 3(11):397-415. https://doi.org/10.1007/s11671-008-9174-9
Kharisov BI, Dias HVR, Kharissova OV, Vázquez A, Peña Y, Gómez I (2014) Solubilization, dispersion and stabilization of magnetic nanoparticles in water and non-aqueous solvents: recent trends. RSC Adv 4(85):45354-45381. https://doi.org/10.1039/C4RA06902A
Du M, Liu Q, Huang C, Qiu X (2017) One-step synthesis of magnetically recyclable Co@BN core–shell nanocatalysts for catalytic reduction of nitroarenes. RSC Adv 7(56):35451–35459. https://doi.org/10.1039/C7RA04907B
Wang L, Luo J, Fan Q, Suzuki M, Suzuki IS, Engelhard MH, Lin Y, Kim N, Wang JQ, Zhong C-J (2005) Monodispersed core-shell Fe3O4@Au nanoparticles. J Phys Chem B 109(46):21593–21601. https://doi.org/10.1021/jp0543429
Kelly AT, Filgueira CS, Schipper DE, Halas NJ, Whitmire KH (2017) Gold coated iron phosphide core–shell structures. RSC Adv. 7(42):25848–25854. https://doi.org/10.1039/C7RA01195D
Garcia-Torres J, Vallés E, Gómez EJ (2010) Synthesis and characterization of Co@Ag core-shell nanoparticles. J Nanoparticle Res 12(6):2189–2199. https://doi.org/10.1007/s11051-009-9784-x
Xu Z, Hou Y, Sun SJ (2007) Magnetic core/shell Fe3O4/Au and Fe3O 4/Au/Ag nanoparticles with tunable plasmonic properties. J Am Chem Soc 129(28):8698–8699. https://doi.org/10.1021/ja073057v
Mandal M, Kundu S, Ghosh SK, Panigrahi S, Sau TK, Yusuf SM, Pal TJ (2005) Magnetite nanoparticles with tunable gold or silver shell. J Colloid Interface Sci. 286(1):187–194. https://doi.org/10.1016/j.jcis.2005.01.013
Lu L, Zhang W, Wang D, Xu X, Miao J, Jiang Y (2010) Fe@Ag core-shell nanoparticles with both sensitive plasmonic properties and tunable magnetism. Mater Lett 64(15):1732–1734. https://doi.org/10.1016/j.matlet.2010.04.025
Ferjaoui Z, Schneider R, Meftah A, Gaffet E, Alem H (2017) Functional responsive superparamagnetic core/shell nanoparticles and their drug release properties. RSC Adv 7(42):26243–26249. https://doi.org/10.1039/c7ra02437a
Nairan A, Khan U, Iqbal M, Khan M, Javed K, Riaz S, Naseem S, Han X (2016) Structural and Magnetic Response in Bimetallic Core/Shell Magnetic Nanoparticles. Nanomaterials. 6(4):72. https://doi.org/10.3390/nano6040072
Song Q, Zhang ZJJ (2004) Shape Control and Associated Magnetic Properties of Spinel Cobalt Ferrite Nanocrystals. J Am Chem Soc 126(19):6164–6168. https://doi.org/10.1021/ja049931r
Tsai C-F, Chen L, Chen A, Khatkhatay F, Zhang W, Wang H (2013) Enhanced Flux Pinning Properties in Self-Assembled Mangetic CoFe2O4 Nanoparticles Doped YBa2Cu3O7−δ Thin Films. IEEE Trans Appl Supercond 23(3):8001204.
Chen D, Yi X, Chen Z, Zhang Y, Chen B, Kang Z (2014) Synthesis of CoFe2O4 nanoparticles by a low temperature microwave-assisted ball-milling technique. Int J Appl Ceram Technol 11(5):954–959. https://doi.org/10.1111/ijac.12110
Chinnasamy CN, Jeyadevan B, Shinoda K, Tohji K, Djayaprawira DJ, Takahashi M, Justin Joseyphus R, Narayanasamy A (2003) Unusually high coercivity and critical single-domain size of nearly monodispersed CoFe2O4 nanoparticles. Appl Phys Lett 83(14):2862–2864. https://doi.org/10.1063/1.1616655
López-Ortega A, Lottini E, Fernández CDJ, Sangregorio C (2015) Exploring the Magnetic Properties of Cobalt-Ferrite Nanoparticles for the Development of a Rare-Earth-Free Permanent Magnet. Chem Mater 27(11):4048–4056. https://doi.org/10.1021/acs.chemmater.5b01034
Sun S, Zeng H, Robinson DB, Raoux S, Rice PM, Wang SX, Li GJ (2004) Monodisperse MFe 2 O 4 (M = Fe, Co, Mn) Nanoparticles. J Am Chem Soc 126(1):273–279. https://doi.org/10.1021/ja0380852
Song Y, Ding J, Wang Y (2012) Shell-dependent evolution of optical and magnetic properties of Co@Au core-shell nanoparticles. J Phys Chem C 116(20):11343–11350. https://doi.org/10.1021/jp300118z
Wang L, Park H-Y, Lim SI-I, Schadt MJ, Mott D, Luo J, Wang X, Zhong C-JJ (2008) Core@shell nanomaterials: gold-coated magnetic oxide nanoparticles. J Mater Chem 18(23):2629. https://doi.org/10.1039/b719096d
Sharma SK, Vargas JM, Vargas NM, Castillo-Sepúlveda S, Altbir D, Pirota KR, Zboril R, Zoppellaro G, Knobel MR (2015) Unusual magnetic damping effect in a silver–cobalt ferrite hetero nano-system. R Soc Chem Adv 5:17117–17122. https://doi.org/10.1039/C4RA14960B
Kooti M, Saiahi S, Motamedi HJ (2013) Fabrication of silver-coated cobalt ferrite nanocomposite and the study of its antibacterial activity. J Magn Magn Mater 333:138–143. https://doi.org/10.1016/j.jmmm.2012.12.038
Zhang K, Xiang Y, Wu X, Feng L, He W, Liu J, Zhou W, Xie S. (2009) Enhanced Optical Responses of Au @ Pd Core / Shell Nanobars 8:1162–1168
Mätzler, C (2002) MATLAB Functions for Mie Scattering and Absorption. IAP Res Rep 2002-08(July 2002):1139–1151. https://doi.org/10.1039/b811392k
Ordal MA, Bell, R. J, Alexander RW, Long LL, Querry MR (1985) Optical properties of fourteen metals in the infrared and far infrared: Al, Co, Cu, Au, Fe, Pb, Mo, Ni, Pd, Pt, Ag, Ti, V, and W. 24(24):4493–4499
Wu W, Wu Z, Yu T, Jiang C, Kim WS (2015) Recent progress on magnetic iron oxide nanoparticles: Synthesis, surface functional strategies and biomedical applications. Sci Technol Adv Mater. 16(2). https://doi.org/10.1088/1468-6996/16/2/023501
Stefan M, Leostean C, Pana O, Soran ML, Suciu RC, Gautron E, Chauvet O (2014) Synthesis and characterization of Fe3O4@ZnS and Fe3O4@Au@ZnS core-shell nanoparticles. Appl Surf Sci 288:180–192. https://doi.org/10.1016/j.apsusc.2013.10.005
Tang R, Jiang C, Qian W, Jian J, Zhang X, Wang H, Yang H (2015) Dielectric relaxation, resonance and scaling behaviors in Sr3Co2Fe24O41 hexaferrite. Sci Rep 5:1–11. https://doi.org/10.1038/srep13645
Sun Y, Ji G, Zheng M, Chang X, Li S, Zhang YJ (2010) Synthesis and magnetic properties of crystalline mesoporous CoFe 2 O 4 with large specific surface area. J Mater Chem 20(5):945–952. https://doi.org/10.1039/B919090B
Bohara RA, Thorat ND, Yadav HM, Pawar SH (2014) One-step synthesis of uniform and biocompatible amine functionalized cobalt ferrite nanoparticles: a potential carrier for biomedical applications. New J Chem 38(7):2979. https://doi.org/10.1039/c4nj00344f
Pervaiz E, Humaira IHG (2015) Hydrothermal Synthesis and Characterization of CoFe 2 O 4 Nanoparticles and Nanorods. J Appl Phys 117. https://doi.org/10.1007/s10948-012-1749-0
Park J, Lee E, Hwang N-M, Kang M, Kim SC, Hwang Y, Park J-G, Noh H-J, Kim J-Y, Park J-H, Hyeon T (2005) One-Nanometer-Scale Size-Controlled Synthesis of Monodisperse Magnetic Iron Oxide Nanoparticles. Angew Chemie Int Ed 44(19):2872–2877. https://doi.org/10.1002/anie.200461665
Wang C, Xu J, Wang J, Rong Z, Li P, Xiao R, Wang S (2015) Polyethylenimine-interlayered silver-shell magnetic-core microspheres as multifunctional SERS substrates. J Mater Chem C 3(33):8684–8693. https://doi.org/10.1039/C5TC01839K
Walker JM, Zaleski JM (2016) A simple route to diverse noble metal-decorated iron oxide nanoparticles for catalysis. Nanoscale 8(3):1535–1544. https://doi.org/10.1039/C5NR06700F
Lim J, Yeap S, Che H, Low S (2013) Characterization of magnetic nanoparticle by dynamic light scattering. Nanoscale Res Lett 8(1):381. https://doi.org/10.1186/1556-276X-8-381
Wang Z, Wen X-D, Hoffmann R, Son JS, Li R, Fang C-C, Smilgies D-M, Hyeon T (2010) Reconstructing a solid-solid phase transformation pathway in CdSe nanosheets with associated soft ligands. Proc Natl Acad Sci 107(40):17119–17124. https://doi.org/10.1073/pnas.1011224107
Zhang L, He R, Gu HC (2006) Oleic acid coating on the monodisperse magnetite nanoparticles. Appl Surf Sci 253(5):2611–2617. https://doi.org/10.1016/j.apsusc.2006.05.023
Araújo-Neto RP, Silva-Freitas EL, Carvalho JF, Pontes TRF, Silva KL, Damasceno IHM, Egito EST, Dantas AL, Morales MA, Carriço ASJ (2014) Monodisperse sodium oleate coated magnetite high susceptibility nanoparticles for hyperthermia applications. J Magn Magn Mater 364:72–79. https://doi.org/10.1016/j.jmmm.2014.04.001
Acknowledgements
I would like to thank Associate Professor Ph.D Masatomo Uehara (Department of Physics, Yokohama National University) for the measurements of SQUID on the nanoparticles.
Availability of Data and Materials
The datasets supporting the conclusions of this article are included within the article.
Author information
Authors and Affiliations
Contributions
All authors read and approved the final manuscript.
Corresponding author
Ethics declarations
Competing Interests
The authors declare that they have no competing interests.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Additional File
Additional file1:
Figure S1. (A) Model of core-shell nanoparticle. Calculated extinction spectra of the core-shell nanoparticle consisting of only the multipolar: (B) and dipolar plasmon modes: (C) surrounded by hexane (n = 1.3740). The dielectric value of core is varied: (a) 1, (b) 3, (c) 6, (d) 9, (e) 12, and (f) 15. (DOCX 110 kb)
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Hara, S., Aisu, J., Kato, M. et al. One-pot synthesis of monodisperse CoFe2O4@Ag core-shell nanoparticles and their characterization. Nanoscale Res Lett 13, 176 (2018). https://doi.org/10.1186/s11671-018-2544-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s11671-018-2544-z