Abstract
Background
Ribozymes are small catalytic RNAs that possess the dual functions of sequence-specific RNA recognition and site-specific cleavage. Trans-cleaving ribozymes can inhibit translation of genes at the messenger RNA (mRNA) level in both eukaryotic and prokaryotic systems and are thus useful tools for studies of gene function. However, identification of target sites for efficient cleavage poses a challenge. Here, we have considered a number of structural and thermodynamic parameters that can affect the efficiency of target cleavage, in an attempt to identify rules for the selection of functional ribozymes.
Results
We employed the Sfold program for RNA secondary structure prediction, to account for the likely population of target structures that co-exist in dynamic equilibrium for a specific mRNA molecule. We designed and prepared 15 hammerhead ribozymes to target GUC cleavage sites in the mRNA of the breast cancer resistance protein (BCRP). These ribozymes were tested, and their catalytic activities were measured in vitro. We found that target disruption energy owing to the alteration of the local target structure necessary for ribozyme binding, and the total energy change of the ribozyme-target hybridization, are two significant parameters for prediction of ribozyme activity. Importantly, target disruption energy is the major contributor to the predictability of ribozyme activity by the total energy change. Furthermore, for a target-site specific ribozyme, incorrect folding of the catalytic core, or interactions involving the two binding arms and the end sequences of the catalytic core, can have detrimental effects on ribozyme activity.
Conclusion
The findings from this study suggest rules for structure-based rational design of trans-cleaving hammerhead ribozymes in gene knockdown studies. Tools implementing these rules are available from the Sribo module and the Srna module of the Sfold program available through Web server at http://sfold.wadsworth.org.
Similar content being viewed by others
Background
Ribozymes are short catalytic RNAs that possess the dual functions of sequence-specific RNA recognition and site-specific cleavage. For the self-cleaving (cis-acting) hammerhead ribozyme discovered by Haseloff and Gerlach [1], the binding arms at the 5' and 3' ends of the ribozyme form two helices, termed helix I and helix III, with the substrate. The catalytic core of the ribozyme contains helix II and largely conserved nucleotides. These structure and sequence features are illustrated in Figure 1A for the hammerhead conformation of a specific mRNA-targeting ribozyme studied here. For inhibition of the expression of a gene through targeting of the gene's mRNA, trans-cleaving hammerhead ribozymes can be engineered with binding arms whose sequences are complementary to the target mRNA sequences flanking a cleavage triplet NUH, where N is any nucleotide and H is any nucleotide except G. Among all possible NUH combinations, cleavage at GUC (see Figure 1A) has been reported to be the most effective [2].
(A) Hammerhead ribozyme conformation arising from hybridization between hammerhead ribozyme GUC19 and the target (BCRP) mRNA. The GUC triplet in the target site and the conserved nucleotides in the ribozyme catalytic core are in boldface. The site of cleavage, i.e., 3' of the C of the GUC triplet, is indicated by an arrow. (B) Thermodynamic cycle of free energy exchanges. ΔGdisruption is the target disruption energy, which represents the free energy cost to alter the local secondary structure at the target site for ribozyme binding; ΔGswitch is the change in free energy from a predicted ribozyme conformation to the "active" binding conformation in which the catalytic core is correctly folded and both binding arms are single-stranded; ΔGhybrid is the free energy gain from the ribozyme-target hybridization (see Methods for description of calculations).
In recent years, gene silencing by RNA interference (RNAi) [3] has emerged as a powerful tool for gene knockdown studies. However, applications of RNAi are limited to eukaryotes, whereas ribozymes can be applied in both eukaryotic and prokaryotic systems [4, 5]. Furthermore, off-target effects by RNAi have been well noted [6–10]. Ribozymes, in contrast, generally possess high target specificity, owing to the dual requirements for cleavage, i.e., complementarity for the binding arms and a cleavage triplet. On the other hand, the knockdown effects by RNAi are stronger than those for ribozymes, suggesting that the two technologies can play complementary roles in functional genomics [11]. Ribozyme libraries constructed with randomized binding arms have been employed for successful identification of novel functional genes in mammalian cells [12–15].
The activities of trans-cleaving ribozymes can vary greatly for different sites on the same target mRNA. Such variability is considered to be largely due to differences in the accessibility of the target sites [11, 16]. There is compelling evidence that, to a large extent, the secondary structure of an mRNA molecule determines the accessibility of the mRNA for numerous gene regulatory mechanisms that require complementary base-pairing for target recognition, including translational inhibition by antisense oligonucleotides [17], target cleavage by ribozymes [18] and siRNAs [19–23], and, more recently, repression of translation by microRNAs [24, 25].
Experimental approaches to the identification of accessible target sites are tedious and time-consuming. The design of effective ribozymes presents a challenge and has largely been based on trial and error. Several computational methods [26–28] make accessibility predictions through structures predicted by the free energy minimization approach [29]. However, this method is not well suited to characterization of the likely population of structures that can exist in dynamic equilibrium in vivo for a specific mRNA molecule [30, 31]. In recent years, an alternative sampling approach to RNA secondary structure prediction has been developed [32] and has been implemented as the Sfold program [33]. The structure sampling algorithm generates a statistically representative sample from the Boltzmann-weighted ensemble of RNA secondary structures for the RNA. In comparison to the minimum free energy method, this approach has been shown to better represent the likely population of mRNA structures [34], and to make improved predictions for structural RNAs [35]. Not surprisingly, predictions by Sfold significantly correlate with experimental results in gene down-regulation studies using antisense oligonucleotides [36, 37], RNAi [38], or microRNAs [25]; in contrast, a lack of significant correlation was found in these applications for predictions based on free energy minimization. Here, we explore the potential value of using Sfold to predicting activities of hammerhead ribozymes.
In this study, a set of hammerhead ribozymes targeted to the transcript of the human ABCG2 gene encoding the breast cancer resistance protein (BCRP) were designed and analyzed in vitro (Table 1). We considered a number of structural and thermodynamic parameters that can affect the activity of a hammerhead ribozyme. Several of these parameters were computed with structures predicted by Sfold for the target mRNA and for the hammerhead ribozyme. One of the parameters measures the target accessibility, and is termed the target disruption energy; it represents the energy cost expended in altering the local target structure so as to allow ribozyme binding (Figure 1). We found that the target disruption energy and the total energy change of the ribozyme-target hybridization are two significant parameters for prediction of ribozyme activity. The target disruption energy is the major contributor to the predictability by the total energy change. In addition, for the ribozyme itself, incorrect folding of the catalytic core or interactions involving the two binding arms and the end sequences of the catalytic core can have detrimental effects on ribozyme activity. These findings suggest rules for a structure-based rational design of trans-cleaving hammerhead ribozymes.
Results
Measurement of ribozyme activity
Traditionally, ribozyme activity is determined through in vitro cleavage followed by gel electrophoresis; the latter most often uses a radiolabeled substrate RNA combined with autoradiography [39], although non-radioactive detection by ethidium bromide staining has also been employed [40]. For both methods, quantification then requires densitometry of the cleavage products on the gel. Here, we wished to evaluate whether ribozyme cleavage activity can also be measured via quantitative RT-PCR. Accordingly, ribozyme GUC7 was incubated for varying lengths of time with the appropriate substrate RNA, and the remaining substrate was analyzed either by agarose gel electrophoresis followed by densitometry, or else by real time RT-PCR on the LightCycler. As shown by Figure 2, the results from these two methods are in good agreement. We concluded that quantitative RT-PCR is a valid method by which to determine ribozyme activity in vitro; thus, all activity measurements for our study were therefore made by this method.
Comparison of methods for quantification of ribozyme cleavage. Ribozyme GUC7 was incubated for various lengths of time from 0 to 60 min, as indicated, and substrate cleavage activity was analyzed by agarose gel electrophoresis and real-time RT-PCR as described in Methods. After electrophoresis (right panel), the gel was stained with ethidium bromide, and the bands were quantified by densitometry. Relative band intensity was then graphed against time (left panel). Target (◆), remaining substrate; product 1 (■) and 2 (▲), relative amounts of each of the two cleavage products. Separately, the substrate was quantified by real-time RT-PCR, and the relative amount of remaining substrate (●) was graphed against time.
Statistical analyses
For the 15 ribozymes tested in vitro, we performed both correlation and regression analyses, using the ribozyme catalytic activity measured by (1-Su3600), and each of the computational parameters (see Methods). First, we observed that there were two outliers, namely, ribozymes GUC3 and GUC11, which behaved differently from the other 13 ribozymes. We thus initially focused on the analyses for the 13 "normally behaving" ribozymes, and then investigated possible explanations for the two outliers.
For the 13 well behaved ribozymes, we found, among the structural and thermodynamic parameters, that ΔGdisruption and ΔGtotal are significantly correlated with ribozyme activity (Table 2). The correlation coefficient for ΔGdisruption is 0.6839 with a P-value of 0.0099, and the correlation coefficient for ΔGtotal is -0.7901 with a P-value of 0.0013. Ribozyme activity, however, was not significantly correlated with ΔGswitch, or ΔGhybrid. Because ΔGtotal is computed from ΔGdisruption, ΔGswitch, and ΔGhybrid (see Methods), ΔGtotal and ΔGdisruption are significantly correlated (correlation coefficient = -0.6349, and P-value = 0.0110). Thus, the significance of the correlation with the ribozyme activity for ΔGtotal is mainly due to ΔGdisruption. From linear regression analysis, either ΔGdisruption or ΔGtotal is significantly predictive of the ribozyme activity (Table 2, Figure 3). Furthermore, in a comparison of the R2 values for ΔGdisruption and ΔGtotal, a relative improvement of about 33.5% is observed for ΔGtotal. This suggests that, although ΔGswitch and ΔGhybrid are insignificant as individual predictors, they do contribute to the improved predictability by ΔGtotal. The R2 for ΔGtotal indicates that over 60% of the variability in the ribozyme cleavage activity can be attributed to ΔGtotal.
Linear regression for prediction of the ribozyme activity (as measured by (1-Su3600) for the amount of substrate cleaved at 1 hr) for 13 "normally behaving" ribozymes. (A) For ΔGdisruption as the predictor, the R2 for the regression is 0.4677, and the P-value is 0.0099. (B) For ΔGtotal as the predictor, the R2 for the regression is 0.6242, and the P-value is 0.0013. Also plotted are the two outliers (GUC11 and GUC3) that were not included in the regression analysis (see Results, Figures 4 and 5 for explanations of the outliers).
To understand the behaviors of the two outliers, ribozymes GUC3 and GUC11, we examined the structures predicted by Sfold for each of the ribozymes. In the case of ribozyme GUC3, we found that, for 79.1% of the structures, there are at least four base pairs formed by nucleotides in the two binding arms and the ends of the catalytic core sequence (Figure 4). In the "active" ribozyme binding conformation (Figure 1B), all of not only the binding arms but also the end sequences of the catalytic core are single-stranded. Thus, substantial intramolecular structure involving these regions can hinder target binding by the ribozyme, despite the correct formation of helix II (Fig 1A). For GUC11, we found that 33.5% of sampled structures have the catalytic core misfolded so that it lacks a correctly formed helix II (Figure 5). This could explain the observation that GUC11 was the least effective for target cleavage (Table 1, Figure 3), despite a moderately accessible target site as indicated by ΔGdisruption (Table 1). In contrast, for each of the other 14 ribozymes in our study, the percentage of the sampled structures having a misfolded core is less than 1%.
Structural analysis of GUC3, one of the two outliers in Figure 3. Unfavorable interactions involving the two binding arms and the end sequences of the ribozyme catalytic core are present in structures predicted for GUC3. (A) The representative structure (i.e., the centroid of a structural cluster [35]) for 44.9% of structures predicted by Sfold for the ribozyme sequence. (B) The representative structure for 29.8% of the predicted structures. (C) The representative structure for 20.9% of the predicted structures. (D) The representative structure for the remaining 4.4% of the predicted structures. The sequence for the ribozyme 5' binding arm ends at A9, and the sequence for the ribozyme 3' binding arm starts at A32.
Structural analysis of GUC11, the other outlier in Figure 3. For a substantial portion of the structure sample generated by Sfold for GUC11, the predicted structure has a misfolded catalytic core. (A) Ribozyme in "active" binding conformation with correctly folded core (i.e., helix II and single stranded end sequences of the core including 9 conserved nucleotides, as shown in Figure 1A), representing 66.5% of the predicted structures. (B) A conformation with a misfolded core, representing 28% of the predicted structures. (C) Another conformation with a misfolded core, representing 5.5% of the predicted structures. The sequence for the ribozyme 5' binding arm ends at A9, and the sequence for the ribozyme 3' binding arm starts at A32.
Discussion and conclusion
In this work, we have considered a number of structural and thermodynamic parameters and have assessed their effects on the in vitro activities of trans-cleaving hammerhead ribozymes. We found that ΔGdisruption, a measure of accessibility at the target site, and ΔGtotal, a measure of the total energy change for the ribozyme-target hybridization process, are two significant parameters for predicting ribozyme activity, and that ΔGdisruption is the major contributor to the predictability by ΔGtotal. In this analysis, the stability of the ribozyme-target hybrid as measured by ΔGhybrid had no impact on ribozyme cleavage activity. Furthermore, we found that incorrect folding of the ribozyme catalytic core or interactions involving the two binding arms and the end sequences of the catalytic core can have detrimental effects on ribozyme activity.
For the selection of functional ribozymes for gene knock-down studies, it is advisable to choose highly accessible target sites (i.e., sites with favorable ΔGdisruption) and favorable ΔGtotal. In addition, a ribozyme with either a misfolded core or structures that are substantially different from the "active" binding conformation (Figure 1B) should be avoided.
Our analyses are limited to modeling of RNA secondary structures. The R2 of 62.42% for ΔGtotal indicates that the remaining 37.58% of the variability in the ribozyme cleavage activity must be attributed to other factors that likely include RNA tertiary interactions [41].
We adopted a population approach to modeling of mRNA secondary structure, by employing the Sfold program. In an antisense application, predictions by Sfold were significantly correlated with activity of antisense oligonucleotides, whereas there was a lack of correlation for the minimum free energy (MFE) predictions [36]. In an RNAi application, the Sfold predictions were significantly predictive of RNAi efficacy [38]. In contrast, the predictive significance was either lacking or poor in terms of R2 for predictions by MFE structures, by heuristic suboptimal foldings [42], or by complete suboptimal foldings [43]. Furthermore, for all of these RNA folding programs, only Sfold predictions were found to fully explain sensitivity of lin-41 mutants to microRNA repression by let-7 [25]. In the current application, if we employ the minimum free energy predictions by mfold [29] in the calculation of ΔGdisruption and ΔGswitch, we observe an insignificant correlation with the ribozyme activity for ΔGdisruption (P-value = 0.0730, R2 = 0.2632, and correlation coefficient = 0.5130), and substantially reduced significance and predictability for ΔGtotal (P-value = 0.0277, R2 = 0.3687, and correlation coefficient = -0.6072). This finding further validates the sampling approach to characterization of the likely population of mRNA structures.
In the calculation of ΔGdisruption, we assumed that the binding of target mRNA by a ribozyme induces only a local structural alteration at the target site. It is likely that in some, if not all, cases, nucleotides outside the target site will also contribute to the energy change due to ribozyme binding. An alternative to the local disruption model is a global disruption model, which assumes that the rest of the target mRNA molecule can refold after ribozyme binding. For this model, ΔGdisruption can be re-calculated by constraining the target site to be single-stranded and refolding the rest of the target mRNA. Surprisingly, we observed insignificant correlation and poor predictability either for ΔGdisruption (P-value = 0.7206, R2 = 0.0121, and correlation coefficient = 0.1100), or for ΔGtotal (P-value = 0.3039, R2 = 0.0956, and correlation coefficient = -0.3093). These results suggest that target cleavage occurs rapidly after the completion of ribozyme-target hybridization such that global refolding of the target before cleavage is unlikely. While partial refolding is a possibility, it is highly uncertain what region of the target will be involved in refolding. Thus, it is difficult to construct a computational model that can represent a reasonable compromise between the local model and the global model.
When the standard deviations for the measured activities are available, an alternative to the standard linear regression analysis is the weighted regression analysis. In a weighted least-squares regression, the square term in the sum of squares for a data point is multiplied by a weight [44]. In general, a larger weight is assigned to a data point with a higher precision as indicated by a smaller standard deviation. Specifically, with the standard deviation of cleavage activity available for every ribozyme (Table 1), 1/(standard deviation)2, that is, 1/variance, can be used as the weight [44]. The weighted regression yielded results that are highly similar to those from the un-weighted regression analysis. For example, for ΔGtotal, the R2 is 0.6119, with a P-value of 0.0016.
While we focused on GUC cleavage sites in the present study, we have also tested a small set of non-GUC NUH sites. We observed a similar level of correlation between ribozyme activity and ΔGdisruption (data not shown), suggesting that the critical parameters identified here are generally relevant for the prediction of the activity of hammerhead ribozymes. However, the levels of activities for non-GUC sites were generally lower than those for the GUC sites, consistent with a previous report that GUC is the most effective target site [2]. To generalize our findings for GUC target sites, further in vitro testing using other targets, as well as in vivo testing in cultured cells, will be required. The latter is currently in progress for the ribozymes described here.
Methods
Preparation of double-stranded DNA oligonucleotide ribozyme templates
For creation of the ribozymes in vitro, two complementary oligonucleotides containing the hammerhead ribozyme core sequence flanked by the sequences for the two binding arms and a T7 RNA polymerase promoter sequence were annealed into duplex DNA in 10 mM Tris, pH 8.0, and 50 mM NaCl, by incubation at 94°C for 5 min, followed by slow cooling to room temperature. All oligonucleotides were obtained from Integrated DNA Technology (IDT, Coralville, IA).
In vitro transcription of ribozyme and substrate target RNA
In vitro transcription of the substrate and ribozyme RNA was performed using the MEGAscript and MEGAshortscript kits (Ambion-ABI, Austin, TX), respectively, following the manufacturer's instructions. Either 2.5 μg of linearized plasmid (pTRIamp19, Ambion) containing the target ABCG2 cDNA sequence, or 1.5 μg of ribozyme DNA were used as template. After transcription, the DNA templates were digested with RQ1 RNase-free DNase. Unincorporated nucleotides were removed from the RNA transcripts by size-exclusion chromatography with a ProbeQuant G-50 Micro Column (GE-Healthcare, Piscataway, NJ) or by phenol/chloroform extraction, both of which were followed by an ethanol precipitation. The purified in vitro-transcribed RNAs and ribozymes were then quantitated spectrophotometrically, and their quality verified by gel electrophoresis (see Additional file 1). Two separate substrate RNAs were made, one from nucleotides -225 to +1011, and one from nucleotides +586 to +1708, relative to the A of the ATG start codon of the full length ABCG2 cDNA (GenBank accession no. NM_004827). Individual ribozymes are numbered consecutively in the order of occurrence of the GUC cleavage sites to which they bind, starting from nucleotide -285. Thus, for example, GUC1 refers to the first GUC triplet after nucleotide -285. A total of 15 hammerhead ribozymes targeted to GUC sites were designed and prepared (Table 1). These ribozymes were constructed with the same ribozyme core sequence, but with different sequences for binding arms that were complementary to the target sequences at the binding site (Figure 1A; also see Additional file 2). For each of these ribozymes, the 3' binding arm had 11 nucleotides, and the 5' binding arm had nine nucleotides.
In vitro cleavage of target sequence and identification of cleavage products
The target RNA (10 pmol) and ribozyme (50 pmol) under study were mixed in 50 mM Tris, pH 8.0, and the in vitro cleavage reaction was initiated by the addition of 20 mM MgCl2. One μl of RNaseGuard was also added, and the mixture was incubated at 37°C. 10-μl aliquots were removed after 0, 5, 10, 15, 30, and 60 min, and the reaction was terminated by the addition of 50 mM EDTA. The cleavage products were then analyzed by electrophoresis in a 2% (v/v) formaldehyde/2.0% (w/v) agarose gel for 3–4 hr at 70 V. The separated products were stained with SYBR Green or ethidium bromide and photographed under UV light [40].
Quantification of residual substrate by real-time RT-PCR
Since a ribozyme irreversibly cleaves its substrate, we reasoned that the cleavage reaction could be quantified through measurement of the amount of substrate remaining by real-time RT-PCR, using primer pairs that span the cleavage site. Accordingly, an aliquot of the cleavage reaction containing both the remaining, uncleaved substrate and the cleavage products was added to a one-step real-time RT-PCR reaction mix containing SYBR Green (Sigma, St. Louis, MO) according to the manufacturer's instructions, and amplification was carried out for 35–45 cycles in a LightCycler® (Roche, Indianapolis, IN), under conditions appropriate for each primer pair (see Additional file 3). Primers flanking each cleavage site were chosen such that the PCR products were between 600 and 400 bp long. The amount of uncleaved substrate present was determined from the crossing point values (CT) calculated by the Lightcycler software from the amplification curve. The relative amount of template remaining at each time point (Su(t)) was then calculated by , where CT(t) is the CT value at time t, and CT(0) is the CT value at time 0. Each time point was assayed in duplicate, and each cleavage reaction was repeated at least four times independently with different batches of substrate RNA. Selected ribozymes were also analyzed with differing ribozyme preparations. No significant activity differences were observed between separate ribozyme and/or substrate preparations. For the subsequent calculations, the relative amount of substrate cleaved at 3600 sec (1-Su3600) was used as the measure of ribozyme activity. In preliminary experiments, we determined that the RT-PCR reaction was linear with the amount of substrate present (data not shown).
Prediction of mRNA secondary structure
The determination of mRNA secondary structure presents both theoretical and experimental challenges. One major impediment to the accurate prediction of mRNA structures stems from the likelihood that a specific mRNA molecule does not adopt a single structure in solution, but instead likely exists in thermodynamic equilibrium among a population of structures [30, 31, 45]. Thus, the computational prediction of secondary structure based on free energy minimization is not well suited to the task of providing a realistic representation of mRNA structures in vivo.
An alternative to free energy minimization for characterization of the ensemble of probable structures for a given RNA molecule has been developed [32]. In this approach, a statistically representative sample is drawn from the Boltzmann-weighted ensemble of RNA secondary structures for the RNA. Such samples of even moderate size can faithfully and reproducibly characterize structure ensembles of enormous size, so that sampling estimates of structural features are statistically reproducible from one sample to another. In particular, in comparison to free-energy minimization, this method has been shown to make better structural predictions [35] and to better represent the likely population of mRNA structures [34], and to yield a significant correlation between predictions and antisense inhibition data [36, 37]. A sample size of 1,000 structures has been shown to be sufficient to guarantee statistical reproducibility in typical sampling statistics and structure clustering features [32, 34]. In applications to modeling RNA target binding by a (partially) complementary nucleic acids, because a single-stranded block of four or five nucleotides is essential for the nucleation step of the hybridization [25, 46, 47], the probability that such block is single-stranded must be high. Thus, in the current and other related applications, we consider the sample size of 1,000 to be sufficient. In the case that a structural feature of small probability is of interest, a much larger sample would be required. The structure sampling method has been implemented in the Sfold software program for RNA folding and applications [33] and is used here for mRNA folding.
Prediction of ribozyme secondary structure
The core of the ribozyme is considered to exist in a mixture of conformations in solution that can interchange rapidly [48–51]. In accordance with this established dynamic view of the hammerhead structure, we also employed Boltzmann structure samples generated by Sfold for the prediction of ribozyme secondary structure. Again, a sample size of 1,000 was used for characterizing probable ribozyme structures at equilibrium.
Structural and thermodynamic parameters
The catalytic activity of a trans-cleaving ribozyme can be affected by many factors. Here, we have focused on a number of structural and thermodynamic parameters. These parameters take into account the secondary structure of the target, the secondary structure of the ribozyme, and the stability of the ribozyme-target duplex. Below, we define these terms in the current context and compute the total free energy change for modeling the hybridization process.
ΔGdisruption is the free energy cost for disruption of the secondary structure at the ribozyme binding site on the target mRNA (Figure 1B), and thus is a measure of accessibility at the target site. For the 15 designed ribozymes, each with nine nucleotides for the 5' binding arm and 11 nucleotides for the 3' binding arm, the binding site involves 20 nucleotides, excluding the unpaired C of the GUC triplet (Figure 1A). To calculate ΔGdisruption, we adopted the simplifying assumption that the binding of a ribozyme to a relatively much longer mRNA should induce a local structural alteration at the target site, but no longer-range effects on overall target secondary structure. In other words, we defined local structural alteration as the breakage of the intramolecular base pairs involving the target site to permit formation of the ribozyme-target duplex (Figure 1). Specifically, ΔGdisruption was calculated as the energy difference between ΔGbefore, the free energy of the original mRNA structure, and ΔGafter, the free energy of the new, locally altered structure (ΔGdisruption = ΔGbefore- ΔGafter). We calculated ΔGbefore from the average energy of the original 1,000 structures predicted by Sfold, and ΔGafter from the average energy of all of the 1,000 locally altered structures. Therefore, under the local disruption assumption, the calculations did not require refolding of the rest of the target sequence.
ΔGswitch is the free energy cost for the ribozyme to switch from one conformation to the conformation that is most favorable for target binding and subsequent cleavage. Here, the starting conformation is any conformation predicted by Sfold, and the binding conformation is the one for which the ribozyme core is correctly folded and both binding arms are single-stranded (Figure 1B). Thus, ΔGswitch = ΔGs - ΔGb , where ΔGs is the free energy of the starting conformation, and ΔGb is the free energy of the binding conformation. In the case that the starting conformation is the binding conformation, ΔGswitch = 0.0 kcal/mol. We calculated ΔGs by the average free energy of the 1000 structures predicted by Sfold for the ribozyme. ΔGb is the same for different starting conformations of a given ribozyme sequence, so there is no need to average over a structure sample.
ΔGhybrid is the energy gain due to the complete intermolecular hybridization between the ribozyme binding arms and the nucleotide sequence of the target binding site. It is calculated by the sum of base-pair stack energies for the two ribozyme arm-target duplexes, an energetic penalty ("initiation energy") for the initialization of bimolecular interaction [52], and other penalties or energies associated with the multi-branched loop formed by the three adjacent helices. Specifically, ΔGhybrid = ΔGinitiation + ∑1≤i≤10ΔGH3_stacking(i) + ∑1≤j≤8ΔGH1_stacking (j)+ ΔGmulti-loop+ ΔGH3_terminal + ΔGH1_terminal + ΔGdangle, where the initiation energy ΔGinitiation = 4.1 kcal/mol [52]; ΔGH3_stacking (i)(1 ≤ i ≤ 10) is the stacking energy for the i-th base-pair stack for helix III (Figure 1A); ΔGH1_stacking (j)(1 ≤ j ≤ 8) is the stacking energy for the j-th base-pair stack for helix I; ΔGmulti-loop is a linear penalty for the multibranched loop formed by the three helices; ΔGH3_terminal is a penalty of 0.5 kcal/mole for the terminal A-U pair for helix III, while ΔGH1_terminal applies the same penalty for a terminal A-U or G-U pair [53] for helix I (e.g., A-U for ribozyme GUC19, Figure 1A); and ΔGdangle is a sum of free energies for dangling ends (i.e., single base stacks)[52]. More specifically, for the linear multibranched loop penalty, ΔGmulti-loop= a + b(number of unpaired bases)+c(number of helices), where a, b, and c are respectively the offset, the free base penalty and the helix penalty, and a = 3.4 kcal/mol, b = 0.0 kcal/mol, and c = 0.4 kcal/mol [53]. In our present context, there are 11 unpaired bases and three helices in the loop, so ΔGmulti-loop= 5.2 kcal/mol, a constant for all ribozymes studied here. For a terminal base-pair N-N' (A-U for ribozyme GUC19, as shown in Figure 1A) for helix I, ΔGdangle = min [ΔG3(U-A,C), ΔG5(N-N',C)] + ΔG5(A-U,A)+ ΔG3(C-G,G)+ ΔG5(G-C,A)+ ΔG3(N'-N,C), where the free energies for both 5' and 3' dangling ends [53] are used, and min [ΔG3(U-A,C), ΔG5(N-N',C)] is the minimum of the two dangling energies, to take into account two possibilities of single-base stacking for the C of the GUC cleavage triplet. It is assumed that a single unpaired nucleotide between two adjacent helices for a multi-branched loop stacks onto the terminal base pair of the helix possessing the more favorable dangling energy.
Finally, we computed ΔGtotal, the total energy change for the ribozyme-target hybridization. ΔGtotal can be calculated through consideration of the energy gain due to the complete intermolecular hybridization and the energy costs owing to structure alterations for both the target and the ribozyme. With use of the parameters introduced above, ΔGtotal = ΔGhybrid - ΔGswitch - ΔGdisruption.
Statistical analyses
The standard univariate linear regression was used for predicting ribozyme activity by each of the parameters listed above. The P-value measures the statistical significance of the parameter, and the R2 of the regression indicates the degree of variability in ribozyme activity that is attributed to the parameter. The Pearson's correlation coefficient between a parameter and the ribozyme activity was also computed. We note that the P-value of the correlation is the same as the P-value of the parameter from the standard univariate regression analysis. The software package R [54] was used for the statistical analyses.
Availability and requirements
The energetic calculations in this study have been incorporated into the Sribo module of the Sfold program. Sribo is freely available for academic applications through a Web server at http://sfold.wadsworth.org/sribo.pl. Structural predictions and features are also available from the Srna module of Sfold http://sfold.wadsworth.org/srna.pl. For commercial usage, a license is required http://www.wadsworth.org/resnres/bioinfo/sfold/License_info.html.
References
Haseloff J, Gerlach WL: Simple RNA enzymes with new and highly specific endoribonuclease activities. Nature 1988, 334(6183):585–591. 10.1038/334585a0
Tanner NK: Ribozymes: the characteristics and properties of catalytic RNAs. FEMS microbiology reviews 1999, 23(3):257–275. 10.1111/j.1574-6976.1999.tb00399.x
Fire A, Xu S, Montgomery MK, Kostas SA, Driver SE, Mello CC: Potent and specific genetic interference by double-stranded RNA in Caenorhabditis elegans. Nature 1998, 391(6669):806–811. 10.1038/35888
Junn E, Kang C: Detection of hammerhead ribozyme-mediated cleavage and reduced expression of LacZ' mRNA in E. coli. Genet Anal 1996, 13(1):1–7.
Tatout C, Gauthier E, Pinon H: Rapid evaluation in Escherichia coli of antisense RNAs and ribozymes. Letters in applied microbiology 1998, 27(5):297–301. 10.1046/j.1472-765X.1998.00428.x
Birmingham A, Anderson EM, Reynolds A, Ilsley-Tyree D, Leake D, Fedorov Y, Baskerville S, Maksimova E, Robinson K, Karpilow J, Marshall WS, Khvorova A: 3' UTR seed matches, but not overall identity, are associated with RNAi off-targets. Nature methods 2006, 3(3):199–204. 10.1038/nmeth854
Semizarov D, Frost L, Sarthy A, Kroeger P, Halbert DN, Fesik SW: Specificity of short interfering RNA determined through gene expression signatures. Proc Natl Acad Sci USA 2003, 100(11):6347–6352. 10.1073/pnas.1131959100
Jackson AL, Bartz SR, Schelter J, Kobayashi SV, Burchard J, Mao M, Li B, Cavet G, Linsley PS: Expression profiling reveals off-target gene regulation by RNAi. Nat Biotechnol 2003, 21(6):635–637. 10.1038/nbt831
Jackson AL, Burchard J, Schelter J, Chau BN, Cleary M, Lim L, Linsley PS: Widespread siRNA "off-target" transcript silencing mediated by seed region sequence complementarity. RNA 2006, 12(7):1179–1187. 10.1261/rna.25706
Pei Y, Tuschl T: On the art of identifying effective and specific siRNAs. Nature methods 2006, 3(9):670–676. 10.1038/nmeth911
Akashi H, Matsumoto S, Taira K: Gene discovery by ribozyme and siRNA libraries. Nature reviews 2005, 6(5):413–422. 10.1038/nrm1646
Li QX, Robbins JM, Welch PJ, Wong-Staal F, Barber JR: A novel functional genomics approach identifies mTERT as a suppressor of fibroblast transformation. Nucleic Acids Res 2000, 28(13):2605–2612. 10.1093/nar/28.13.2605
Kashani-Sabet M, Liu Y, Fong S, Desprez PY, Liu S, Tu G, Nosrati M, Handumrongkul C, Liggitt D, Thor AD, Debs RJ: Identification of gene function and functional pathways by systemic plasmid-based ribozyme targeting in adult mice. Proc Natl Acad Sci USA 2002, 99(6):3878–3883. 10.1073/pnas.002025599
Beger C, Pierce LN, Kruger M, Marcusson EG, Robbins JM, Welcsh P, Welch PJ, Welte K, King MC, Barber JR, Wong-Staal F: Identification of Id4 as a regulator of BRCA1 expression by using a ribozyme-library-based inverse genomics approach. Proc Natl Acad Sci USA 2001, 98(1):130–135. 10.1073/pnas.98.1.130
Kawasaki H, Taira K: A functional gene discovery in the Fas-mediated pathway to apoptosis by analysis of transiently expressed randomized hybrid-ribozyme libraries. Nucleic Acids Res 2002, 30(16):3609–3614. 10.1093/nar/gkf476
Bramlage B, Luzi E, Eckstein F: Designing ribozymes for the inhibition of gene expression. Trends in biotechnology 1998, 16(10):434–438. 10.1016/S0167-7799(98)01236-0
Vickers TA, Wyatt JR, Freier SM: Effects of RNA secondary structure on cellular antisense activity. Nucleic Acids Res 2000, 28(6):1340–1347. 10.1093/nar/28.6.1340
Zhao JJ, Lemke G: Rules for ribozymes. Mol Cell Neurosci 1998, 11(1–2):92–97. 10.1006/mcne.1998.0669
Bohula EA, Salisbury AJ, Sohail M, Playford MP, Riedemann J, Southern EM, Macaulay VM: The efficacy of small interfering RNAs targeted to the type 1 insulin-like growth factor receptor (IGF1R) is influenced by secondary structure in the IGF1R transcript. J Biol Chem 2003, 278(18):15991–15997. 10.1074/jbc.M300714200
Kretschmer-Kazemi Far R, Sczakiel G: The activity of siRNA in mammalian cells is related to structural target accessibility: a comparison with antisense oligonucleotides. Nucleic Acids Res 2003, 31(15):4417–4424. 10.1093/nar/gkg649
Overhoff M, Alken M, Far RK, Lemaitre M, Lebleu B, Sczakiel G, Robbins I: Local RNA target structure influences siRNA efficacy: a systematic global analysis. J Mol Biol 2005, 348(4):871–881. 10.1016/j.jmb.2005.03.012
Schubert S, Grunweller A, Erdmann VA, Kurreck J: Local RNA target structure influences siRNA efficacy: systematic analysis of intentionally designed binding regions. J Mol Biol 2005, 348(4):883–893. 10.1016/j.jmb.2005.03.011
Yoshinari K, Miyagishi M, Taira K: Effects on RNAi of the tight structure, sequence and position of the targeted region. Nucleic Acids Res 2004, 32(2):691–699. 10.1093/nar/gkh221
Zhao Y, Samal E, Srivastava D: Serum response factor regulates a muscle-specific microRNA that targets Hand2 during cardiogenesis. Nature 2005, 436(7048):214–220. 10.1038/nature03817
Long D, Lee R, Williams P, Chan CY, Ambros V, Ding Y: Potent effect of target structure on microRNA function. Nat Struct Mol Biol 2007, 14: 287–294. 10.1038/nsmb1226
Denman RB: Using RNAFOLD to predict the activity of small catalytic RNAs. BioTechniques 1993, 15(6):1090–1095.
Sczakiel G, Tabler M: Computer-aided calculation of the local folding potential of target RNA and its use for ribozyme design. Methods Mol Biol 1997, 74: 11–15.
James W, Cowe E: Computational approaches to the identification of ribozyme target sites. Methods Mol Biol 1997, 74: 17–26.
Zuker M: Mfold web server for nucleic acid folding and hybridization prediction. Nucleic Acids Res 2003, 31(13):3406–3415. 10.1093/nar/gkg595
Altuvia S, Kornitzer D, Teff D, Oppenheim AB: Alternative mRNA structures of the cIII gene of bacteriophage lambda determine the rate of its translation initiation. J Mol Biol 1989, 210(2):265–280. 10.1016/0022-2836(89)90329-X
Betts L, Spremulli LL: Analysis of the role of the Shine-Dalgarno sequence and mRNA secondary structure on the efficiency of translational initiation in the Euglena gracilis chloroplast atpH mRNA. J Biol Chem 1994, 269(42):26456–26463.
Ding Y, Lawrence CE: A statistical sampling algorithm for RNA secondary structure prediction. Nucleic Acids Res 2003, 31(24):7280–7301. 10.1093/nar/gkg938
Ding Y, Chan CY, Lawrence CE: Sfold web server for statistical folding and rational design of nucleic acids. Nucleic Acids Res 2004, (32 Web Server):W135–141. 10.1093/nar/gkh449
Ding Y, Chan CY, Lawrence CE: Clustering of RNA secondary structures with application to messenger RNAs. J Mol Biol 2006, 359(3):554–571. 10.1016/j.jmb.2006.01.056
Ding Y, Chan CY, Lawrence CE: RNA secondary structure prediction by centroids in a Boltzmann weighted ensemble. RNA 2005, 11(8):1157–1166. 10.1261/rna.2500605
Ding Y, Lawrence CE: Statistical prediction of single-stranded regions in RNA secondary structure and application to predicting effective antisense target sites and beyond. Nucleic Acids Res 2001, 29(5):1034–1046. 10.1093/nar/29.5.1034
Shao Y, Wu Y, Chan CY, McDonough K, Ding Y: Rational design and rapid screening of antisense oligonucleotides for prokaryotic gene modulation. Nucleic Acids Res 2006, 34(19):5660–5669. 10.1093/nar/gkl715
Shao Y, Chan CY, Maliyekkel A, Lawrence CE, Roninson IB, Ding Y: Effect of target secondary structure on RNAi efficiency. RNA 2007, 13(10):1631–1640. 10.1261/rna.546207
Kowalski P, Wichert A, Holm PS, Dietel M, Lage H: Selection and characterization of a high-activity ribozyme directed against the antineoplastic drug resistance-associated ABC transporter BCRP/MXR/ABCG2. Cancer gene therapy 2001, 8(3):185–192.
Liu R, Rohe B, Carson DD, Farach-Carson MC: A rapid and simple nonradioactive method for in vitro testing of ribozyme activity. Antisense & nucleic acid drug development 2002, 12(4):283–288. 10.1089/108729002320351601
Martick M, Scott WG: Tertiary contacts distant from the active site prime a ribozyme for catalysis. Cell 2006, 126(2):309–320. 10.1016/j.cell.2006.06.036
Zuker M: On finding all suboptimal foldings of an RNA molecule. Science 1989, 244(4900):48–52. 10.1126/science.2468181
Wuchty S, Fontana W, Hofacker IL, Schuster P: Complete suboptimal folding of RNA and the stability of secondary structures. Biopolymers 1999, 49(2):145–165. 10.1002/(SICI)1097-0282(199902)49:2<145::AID-BIP4>3.0.CO;2-G
Weisberg S: Applied Linear Regression. 3rd edition. John Wiley & Sons, New York; 2005.
Christoffersen RE, McSwiggen JA, Konings D: Application of computational technologies to ribozyme biotechnology products. J Mol Structure (Theochem) 1994, 311: 273–284.
Milner N, Mir KU, Southern EM: Selecting effective antisense reagents on combinatorial oligonucleotide arrays. Nat Biotechnol 1997, 15(6):537–541. 10.1038/nbt0697-537
Hargittai MR, Gorelick RJ, Rouzina I, Musier-Forsyth K: Mechanistic insights into the kinetics of HIV-1 nucleocapsid protein-facilitated tRNA annealing to the primer binding site. J Mol Biol 2004, 337(4):951–968. 10.1016/j.jmb.2004.01.054
Nelson JA, Uhlenbeck OC: When to believe what you see. Mol Cell 2006, 23(4):447–450. 10.1016/j.molcel.2006.08.001
Peracchi A, Karpeisky A, Maloney L, Beigelman L, Herschlag D: A core folding model for catalysis by the hammerhead ribozyme accounts for its extraordinary sensitivity to abasic mutations. Biochemistry 1998, 37(42):14765–14775. 10.1021/bi980867y
Simorre JP, Legault P, Hangar AB, Michiels P, Pardi A: A conformational change in the catalytic core of the hammerhead ribozyme upon cleavage of an RNA substrate. Biochemistry 1997, 36(3):518–525. 10.1021/bi9620520
Westhof E: A tale in molecular recognition: the hammerhead ribozyme. J Mol Recognit 2007, 20(1):1–3. 10.1002/jmr.806
Xia T, SantaLucia J Jr, Burkard ME, Kierzek R, Schroeder SJ, Jiao X, Cox C, Turner DH: Thermodynamic parameters for an expanded nearest-neighbor model for formation of RNA duplexes with Watson-Crick base pairs. Biochemistry 1998, 37(42):14719–14735. 10.1021/bi9809425
Mathews DH, Sabina J, Zuker M, Turner DH: Expanded sequence dependence of thermodynamic parameters improves prediction of RNA secondary structure. J Mol Biol 1999, 288(5):911–940. 10.1006/jmbi.1999.2700
Team RDC: R: A language and environment for statistical computing (ISBN 3–900051–07–0).
Acknowledgements
The Computational Molecular Biology and Statistics Core at the Wadsworth Center is acknowledged for providing computing resources for this work. This work was supported in part by National Science Foundation grant DMS-0200970 and National Institutes of Health grant R01 GM068726 to Y.D.
Author information
Authors and Affiliations
Corresponding author
Additional information
Competing interests
The author(s) declare that they have no competing interests.
Authors' contributions
YD and ES conceived the study. YS and CYC performed computational analyses. SW and JRK carried out the in vitro experiments. YD supervised the computational work. ES supervised the experimental work. YS, YD and ES wrote the manuscript. All authors read and approved the final manuscript.
Yu Shao, Susan Wu contributed equally to this work.
Electronic supplementary material
12859_2007_1841_MOESM1_ESM.pdf
Additional File 1: A representative gel. In-vitro transcribed and purified ribozymes were analyzed by denaturing gel electrophoresis. The figure shows a representative gel with four different ribozymes. (PDF 104 KB)
12859_2007_1841_MOESM2_ESM.doc
Additional File 2: Sequences of hammerhead ribozymes. The table lists sequences of 15 hammerhead ribozymes targeted to the BCRP mRNA. (DOC 35 KB)
12859_2007_1841_MOESM3_ESM.pdf
Additional File 3: Primer sequences for RT-PCR amplification. The table lists primer sequences for RT-PCR amplification of the ribozymes for quantifying cleavage reaction. (PDF 57 KB)
Authors’ original submitted files for images
Below are the links to the authors’ original submitted files for images.
Rights and permissions
Open Access This article is published under license to BioMed Central Ltd. This is an Open Access article is distributed under the terms of the Creative Commons Attribution License ( https://creativecommons.org/licenses/by/2.0 ), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Shao, Y., Wu, S., Chan, C.Y. et al. A structural analysis of in vitro catalytic activities of hammerhead ribozymes. BMC Bioinformatics 8, 469 (2007). https://doi.org/10.1186/1471-2105-8-469
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/1471-2105-8-469