Abstract
The influence of Nb on the microstructure and wear resistance of the surfacing layer was investigated by using the Fe-based flux-cored wire in the Fe–Cr–C–B system. The microstructure, microhardness and wear resistance properties of the samples were investigated by X-ray diffraction, scanning electron microscopy, microhardness testing and abrasive wear testing, respectively. The results indicate that microstructures of the alloy are composed of martensite, retained austenite, M23(C,B)6 and NbC. Boride M23(C,B)6 is distributed along the grain boundaries, while NbC in shape-regular quadrilateral is distributed in martensite. The microhardness is distributed from the substrate to the surfacing layer gradiently. NbC significantly improved the wear resistance of surfacing layer.
Similar content being viewed by others
References
X.H. Gao, Z.M. Guo, Q.F. Geng, P.J. Ma, G. Liu, Sol. Energy Mater. Solar Cells 157 (2016) 543–549.
Z.Z. Fu, R. Koc, Mater. Sci. Eng. A 676 (2016) 278–288.
O.P. Modi, D.P. Mondal, B.K. Prasad, M. Singh, H.K. Khaira, Mater. Sci. Eng. A 343 (2003) 235–242.
A. Gualco, H.G. Svoboda, E.S. Surian, Wear 360–361 (2016) 14–20.
H.Y. Liu, Z.B. Song, Q. Lao, S.P. Chen, Q.S. Meng, J. Alloy. Compd. 23 (2016) 276–280.
Q.T. Li, Y.P. Lei, H.G. Fu, Z.W. Wu, J. Lin, J. Alloy. Compd. 23 (2016) 124–129.
S. Yoshioka, L. Boatemaa, S.V.D. Zwaag, J. Eur. Ceram. Soc. 36 (2016) 4155–4162.
Z.R. Li, D.Y. Li, N.N. Zhang, H. Huang, X. Wang, J. Alloy. Compd. 23 (2016) 834–841.
Y.H. Liu, J. Li, F.Z. Xuan, Surf. Eng. 28 (2013) 560–563.
A. Surzhenkov, M. Antonov, D. Goljandin, P. Kulu, M. Viljus, R. Traksmaa, Surf. Eng. 32 (2016) 624–630.
A. Singh, N.B. Dahotre, J. Mater. Sci. 39 (2004) 4553–4560.
T. Sun, R.B. Song, X. Wang, P. Deng, C.J. Wu, J. Alloy. Compd. 22 (2015) 84–90.
A.P. Modi, Tribol. Int. 40 (2007) 490–497.
Y. Jian, Z. Huang, J. Xing, X. Liu, L. Sun, B. Zheng, Wear 362–363 (2016) 68–77.
J.A. Cabral Miramontes, J.D.O. Barceinas Sánchez, F. Almeraya Calderón, A. Martínez Villafañe, J.G. Chacón Nava, J. Mater. Eng. Perform. 19 (2010) 880–884.
S.G. Huang, J. Vleugels, H. Mohrbacher, M. Woydt, Metal Powder Rep. 71 (2016) No.5, 349–355.
J.H. Kim, K.H. Ko, S.D. Noh, G.G. Kim, S.J. Kim, Wear 267 (2008) 1415–1419.
Y. Yang, J.T. Busby, J. Nucl. Mater. 448 (2014) 282–293.
L. Zong, Z.J. Liu, Adv. Mater. Res. 189–193 (2011) 518–522.
Acknowledgements
This work was financially supported by Doctor Foundation Start-up Project of Liaoning Province (No. 20131079).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Gou, J., Liu, Zj. & Jia, H. Effects of Nb on microstructure and wear resistance of Fe–Cr–C–B surfacing alloy. J. Iron Steel Res. Int. 25, 243–251 (2018). https://doi.org/10.1007/s42243-018-0033-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42243-018-0033-3