Abstract
Numerous fibers combinations are used in the construction industry for improving the fracture resistance of hybrid fiber-reinforced concrete (HyFRC). In this paper, the effects of fiber combination on the mechanical properties of FRC are studied. For this purpose, different volume percentages of the added fibers with different compositions are used to investigate their influences on the fracture toughness and tensile strength of the concrete. Different fiber compositions including the steel, carbon and polypropylene of different volume ratios can be added to the concrete specimens for measuring their tensile strength and critical stress intensity factor of the samples containing preexisting cracks. Therefore, some concrete specimens are prepared by adding 1% carbon fibers and different ratios of steel and polypropylene fibers. The direct tensile testing machine and the indirect Brazilian tensile test apparatus are used to measure the tensile strength of the HyFRC specimens in the laboratory. Some specimens are also used to measure the fracture toughness (Mode I) of the HyFRC by using the novel compression-to-tensile load converting device implemented in the universal tensile testing machine. The novelty of this paper is to render a new approach for the measurement of tensile strength and fracture toughness of hybridized fiber-reinforced concrete (HyFRC) by adding different kinds of fibers. These experimental results show that by changing the ratios of the carbon, steel and polyethylene fibers the tensile strength and fracture toughness of HyFRC specimens change accordingly.
Similar content being viewed by others
References
Abokifa M, Moustafa MA (2021) Experimental behavior of poly methyl methacrylate polymer concrete for bridge deck bulb tee girders longitudinal field joints. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2020.121840
Abrishambaf A, Joaquim Barros AO, Vítor Cunha MCF (2015) Tensile stress–crack width law for steel fibre reinforced self-compacting concrete obtained from indirect (splitting) tensile tests. Cem Concr Compos 57:153–165
Ahmed SFU, Maalej MUF (2009) Tensile strain hardening behaviour of hybrid steel-polyethylene fibre reinforced cementitious composites. Constr Build Mater 23(1):96–106
ASTM C496 (2011) Standard test method for splitting tensile strength of cylindrical concrete specimens. Am Stand Test Mater
Bagher Shemirani A, Naghdabadi R, Ashrafi M (2016) Experimental and numerical study on choosing proper pulse shapers for testing concrete specimens by split Hopkinson pressure bar apparatus. Constr Build Mater 125:326–336
Bagher Shemirani A, Haeri H, Sarfarazi V, Hedayat A (2017) A review paper about experimental investigations on failure behaviour of non-persistent joint. Geomech Engine 13(4):535–570
Bagher Shemirani A, Haeri H, Sarfarazi V, Akbarpour A (2018a) The discrete element method simulation and experimental study of determining the mode I stress-intensity factor. Struct Engine Mecha 66(3):379–386
Bagher Shemirani A, Sarfarazi V, Haeri H, Fatehi MM, Hosseini S (2018b) A discrete element simulation of a punch-through shear to investigate the confining pressure effects on the shear behaviour of concrete cracks. Comput Concr 21(2):189–197
Banthia N, Gupta R (2004) Hybrid fiber reinforced concrete (HyFRC): fiber synergy in high strength matrices. Mater Struct 37(10):707–716
Banthia N, Majdzadeh F, Wu J, Bindiganavile V (2014) Fiber synergy in hybrid fiber reinforced concrete (HYFRC) in flexure and direct shear. Cement Concr Compos 48:91–97
Bowie OL (1973) Solution of plane crack problems by mapping technique. In: Sih GC (ed) Methods of analyses and solutions of crack problems. Lehigh University, Bethglehem, Pennsylvanian, USA
Broek D (1989) The practical use of fracture mechanics, 4th edn. Kluwer Academic Publishers, Netherland
Dawood E, Ramli M (2012) Mechanical properties of high strength flowing concrete with hybrid fibers. Constr Build Mater 28:193–200
Erdal Ö, Yaylacı M, Ahmet B (2015) Analytical solution of a contact problem and comparison with the results from FEM. Struct Engine Mecha 54(4):607–622
Fatehi Marji M (2014) Numerical analysis of quasi-static crack branching in brittle solids by a modified displacement discontinuity method. Inter J Solids Struc 51(9):1716–1736
Haeri H, Sarfarazi V (2016) Numerical simulation of tensile failure of concrete using Particle Flow Code (PFC). Comput Concr 18(1):39–51
Haeri H, Sarfarazi V, Bagher Shemirani A, Marji MF (2018) On the direct experimental measurement of mortar fracture toughness by a compression-to-tensile load transformer (CTLT). Constr Build Mater 181:687–712
Hale M, Freyne SF, Russell BW (2005) Entraining air in high-performance concrete and its effect on compressive strength. In: Russel HG (ed) Proceedings of the seventh international symposium on the utilization of high-strength/high-performance concrete, SP 228. American Concrete Institute, Farmington Hills, MI. pp 173–188
Hillerborg A (1989) The compression stress-strain curve for design of reinforced concrete beams. Fracture mechanics: application to concrete. ACI-SP-118
Hsie M, Tu C, Song P (2008) Mechanical properties of polypropylene hybrid fiber-reinforced concrete. Mat Sci Eng 494:153–157
Irwin GR (1957) Analysis of stress and strains near the end of a crack. J Appl Mech 24:361–365
Kang ST, Choi JI, Koh KT, Lee KS, Lee BY (2016) Hybrid effects of steel fiber and microfiber on the tensile behavior of ultra-high performance concrete. Compo Struc 145:37–42
Khan MI (2003) Permeation of high performance concrete. J Mater Civil Eng 15(1):84–92
Khiem Q, Tran ST, Hiroshi T (2019) Tensile behaviors of natural fiber and cement reinforced soil subjected to direct tensile test. J Buil Eng. https://doi.org/10.1016/j.jobe.2019.100748
Kim J, Taha MR (2014) Experimental and numerical evaluation of direct tension test for cylindrical concrete specimens. Adv Civ Eng. https://doi.org/10.1155/2014/156926
Li Z, Li C, Shi Y, Zhou X (2017) Experimental investigation on mechanical properties of hybrid fiber reinforced concrete. Constr Build Mater 157:930–942
Miura T, Nakamura H, Yamamoto Y (2020) Impact of origination of expansion on three-dimensional expansion crack propagation process due to DEF evaluated by mesoscale discrete model. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2020.119911
Mohammad A (2016) Statistical flexural toughness modeling of ultra-high performance Concrete using response surface method. Comput Concr 17(4):33–39
Nasrina S, Ibrahim A (2021) Flexural response of ultra-high-performance concrete (UHPC) hybrid bridge deck connections made with local materials. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2020.121451
Nguyen DL, Kim DJ, Ryu GS, Koh KT (2013) Size effect on flexural behavior of ultra-high-performance hybrid fiber-reinforced concrete. Compos B Eng 45(1):1104–1116
Pakravan HR, Latifi M, Jamshidi M (2017) Hybrid short fiber reinforcement system in concrete: a review. Constr Build Mater 142:280–294
Pan B, Gao Y, Zhong Y (2014) Theoretical analysis of overlay resisting crack propagation in old cement mortar pavement. Struc Engin Mecha 52(4):167–181
Park SH, Kim DJ, Ryu GS, Koh KT (2012) Tensile behavior of ultra high performance hybrid fiber reinforced concrete. Ceme Concr Compo 34(2):172–184
Qian C, Stroeven P (2000) Fracture properties of concrete reinforced with steel-polypropylene hybrid fibers. Cem Concr Compos 22:343–351
Richardson AE (2006) The compressive strength of the concrete with polypropylene fiber additions. Struct Surv 2(24):138–153
Ruiz JM, Rasmussen RO, Simon M (2005) Performance-based concrete mixture design and optimization. In: Russel HG (ed) Proceedings of the seventh international symposium on the utilization of high-strength/high-performance concrete, SP 228. American Concrete Institute, Farmington Hills, MI, pp 971–989
Sanford RJ (2003) Principles of fracture mechanics. Prentice Hall, USA
Sardemir M (2016) Empirical modeling of flexural and splitting tensile strengths of concrete containing fly ash by GEP. Comput Concr 17(4):489–498
Schreurs PJG (2012) Fracture mechanics. Lecture notes—course 4A780, pp 1–141
Shaowei H, Aiqing X, Xin H, Yangyang Y (2016) Study on fracture characteristics of reinforced concrete wedge splitting tests. Comput Concr 18(3):1–19
Shou YD, Zhou XP, Berto F (2019) 3D numerical simulation of initiation, propagation and coalescence of cracks using the extended non-ordinary state-based peridynamics. Theor Appl Fract Mech 101:254–268
Shuraim AB, Aslam F, Hussain R, Alhozaimy A (2016) Analysis of punching shear in high strength RC panels—experiments, comparison with codes and FEM results. Comput Concr 17(6):739–760
Sivakumar A, Santhanam M (2007) Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibers. Ceme Concr Compos 29:603–608
Swaddiwudhipong S, Lu HR, Wee TH (2003) Direct tension test. Cem Concr Res 33:2077–2084
Uzun Yaylacı E, Yaylacı M, Ölmez H, Birinci A (2020) Artificial neural network calculations for a receding contact problem. Comput Concr. https://doi.org/10.12989/cac.2020.25.6.000
Vetr MGH, Shirali NM, Ghamari A (2016) Seismic resistance of hybrid shear wall (HSW) systems. J Constr Steel Res 116:247–270
Weiss WJ, Yang W, Shah SP (1999) Factors influencing durability and early-age cracking in high strength concrete structures. SP 189–22. High performance concrete: research to practice. Farmington Hills, Mich., pp 387–409
Whittaker B, Singh R, Sun G (1992) Rock fracture mechanics. Principles, design and applications. Elsevier, Netherlands
Xu B, Shi HS (2009) Correlations among mechanical properties of steel fiber reinforced concrete. Constr Build Mater 23:3468–3474
Yao W, Li J, Wu K (2003) Mechanical properties of hybrid fiber-reinforced concrete at low fiber volume fraction. Cem Concr Res 33:27–30
Yaylaci M (2016) The investigation crack problem through numerical analysis. Struct Eng Mech 57(6):1143–1156
Yaylacı M, Ahmet B (2013) The receding contact problem of two elastic layers supported by two elastic quarter planes. Struct Eng Mech 48(2):241–255
Yaylacı M, Mehmet A (2020) Finite element modeling of contact between an elastic layer and two elastic quarter planes. Comput Concr 26(2):107–114
Yaylacı M, Cemalettin T, Mehmet A (2019) Numerical analysis of the receding contact problem of two bonded layers resting on an elastic half plane. Struct Eng Mech. https://doi.org/10.12989/sem.2019.72.6.000
Yaylacı M, Adıyaman E, Öner E, Birinci A (2021a) Examination of analytical and finite element solutions regarding contact of a functionally graded layer. Struct Eng Mech 76(3):325–336
Yaylacı M, Adıyaman E, Öner E, Birinci A (2021b) Investigation of continuous and discontinuous contact cases in the contact mechanics of graded materials using analytical method and FEM. Comput Concr 27(3):199–210
Yaylacı M, Eyüboğlu A, Adıyaman G, Uzun Yaylacı E, Öner E, Birinci A (2021c) Assessment of different solution methods for receding contact problems in functionally graded layered mediums. Mech Mater. https://doi.org/10.1016/j.mechmat.2020.103730
Yu KQ, Yu JT, Dai JG, Lu ZD, Shah SP (2018) Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers. Constr Build Mater 158:217–227
Zhou FP (1988) Some aspects of tensile fracture behaviour and structural response of cementitious materials. Report TVBM-1008, Division of Building Materials, Lund Institute of Technology
Zhou XP, Wang Y (2016) Numerical simulation of crack propagation and coalescence in pre-cracked rock-like Brazilian disks using the non-ordinary state-based peridynamics. Inte J Rock Mech Min Sci 89:235–249
Zhou XP, Yang HQ (2012) Multiscale numerical modeling of propagation and coalescence of multiple cracks in rock masses. Int J Rock Mech Min Sci 55:15–27
Zhou XP, Cheng H, Feng YF (2013) An experimental study of crack coalescence behaviour in rock-like materials containing multiple flaws under uniaxial compression. Rock Mech Rock Eng 47:1961–1986
Zhou XP, Bi J, Qian Q (2015) Numerical simulation of crack growth and coalescence in rock-like materials containing multiple pre-existing flaws. Rock Mech Rock Eng 48(3):1097–1114
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Bagher Shemirani, A. Effects of Fiber Combination on the Fracture Resistance of Hybrid Reinforced Concrete. Iran J Sci Technol Trans Civ Eng 46, 2161–2172 (2022). https://doi.org/10.1007/s40996-021-00703-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40996-021-00703-x