Abstract
Submerged exhaust noise is a significant contributor to the acoustic signature of submerged equipment using thermal power engines. Recently, it has been shown that the structure of a submerged exhaust nozzle has a great impact on the radiated noise levels. However, what kind of structure can effectively reduce the noise and how it works are still being studied. This paper investigates the influence of the lobed structure on the submerged gas jets. The submerged exhaust gas signatures are examined using a round nozzle and a lobed nozzle at gas flow rates from low to high \((30-210\,\hbox {m}^{3}/\hbox {h})\). Hydrophones are used to measure the sound pressure emitted from the gas jet. A high frequency pressure transmitter is applied to reveal the effect of the lobed structure on the pressure fluctuations in the upstream pipeline. A high-speed digital video camera serves to examine the gas behavior near the nozzle exit. The sound pressure, pressure and image signals are synchronized using an originally designed synchronous system. The experiment results demonstrate that low frequency (less than 1000 Hz) sounds and pressure fluctuations always dominant the spectrum in a submerged exhaust process. These strong sounds and pressure fluctuations are closely associated with the jet contractions. Gas exhausted from the lobed nozzle would smoothly flow along the lobed edge, and have a smaller jet width than that from the round nozzle in the downstream area. The Strouhal number would also be reduced by the lobed nozzle, which means that gas exhausted from the lobed nozzle is less obstructed. Therefore, the lobed nozzle would not only reduce the low frequency sounds associated with the jet contraction (reduce 3.3–8.6 dB), but also significantly reduce the pressure fluctuations in the upstream pipeline.
Similar content being viewed by others
References
Rue, D.: Submerged combustion melting. Am. Ceram. Soc. Bull. 83(10), 18–20 (2004)
Pioro, L.S., Osnach, A.M., Pioro, I.L.: Production of molten defluorinated phosphates in a submerged combustion melter. Ind. Eng. Chem. Res. 42(26), 6697–6704 (2003)
Ozawa, Y., Mori, K.: Effect of physical properties of gas and liquid on bubbling-jetting phenomena in gas injection into liquid. Trans. Iron Steel Inst. Jpn. 26, 291–297 (1986)
Jamialahmadi, M., Zehtaban, M.R., Müller-Steinhagen, H., et al.: Study of bubble formation under constant flow conditions. Chem. Eng. Res. Des. 79(5), 523–532 (2001)
Sanada, T., Watanabe, M., Fukano, T., Kariyasaki, A.: Behavior of a single coherent gas bubble chain and surrounding liquid jet flow structure. Chem. Eng. Sci. 60, 4886–4900 (2005)
Gulawani, S.S., Deshpande, S.S., Joshi, J.B., et al.: Submerged gas jet into a liquid bath: a review. Ind. Eng. Chem. Res. 46(10), 3188–3218 (2007)
Manasseh, R., LaFontaine, R.F., Davy, J., et al.: Passive acoustic bubble sizing in sparged systems. Exp. Fluids 30, 672–682 (2001)
Manasseh, R., Babanin, A.V., Forbes, C., et al.: Passive acoustic determination of wave-breaking events and their severity across the spectrum. J. Atmos. Ocean. Technol. 23, 599–618 (2006)
Arghode, V.K., Gupta, A.K.: Jet characteristics from a submerged combustion system. Appl. Energy 89, 246–253 (2012)
Weiland, C.J.: Characteristics of the high speed gas–liquid interface. Ph.D. Dissertation, Virginia Tech, Blacksburg (2010)
Gavigan, J.J., Watson, E.E., King, W.F.: Noise generation by gas jets in a turbulent wake. J. Acoust. Soc. Am. 56(4), 1094–1099 (1974)
Chen, L., Manasseh, R., Nikolovksa, A., Norwood, C.: Noise generation by an underwater gas jet. In: Proceedings, 8th Western Pacific Acoustics Conference, Melbourne, 7–9 April 2003
Zong-Rui, Hao, Wang, Le-Qin, Wu, Da-Zhuan, et al.: Effect of nozzle size on noise levels of submerged gas. J. Eng. Thermophys. 32(6), 949–952 (2011)
Hao, Zongrui, Zhou, Zhonghai: Experimental studies on the effects of nozzle structures on characteristics of submerged gas jet noise. App. Mech. Mater. 204, 4620–4623 (2012)
Xu, W., Lai, Z., Wu, D., Wang, L.: Acoustic emission characteristics of underwater gas jet from a horizontal exhaust nozzle. Appl. Acoust. 74, 845–849 (2013)
Linck, Martin B., Gupta, Ashwani K., Yu, Kenneth H.: Submerged combustion and two-phase exhaust jet instabilities. J. Propul. Power 25(2), 522–532 (2009)
Hu, H., et al.: Mixing process in a lobed jet flow. AIAA J. 40(7), 1339–1345 (2002)
Belovich, V., Samimy, M.: Mixing processes in a coaxial geometry with a central lobed mixer-nozzle. AIAA J. 35(5), 838–841 (1997)
Hu, H., Kobayashi, T., Saga, T., et al.: Particle image velocimetry and planar laser-induced fluorescence measurements on lobed jet mixing flows. Exp. Fluids 29(1), S141–S157 (2000)
Waitz, I.A., Qiu, Y.J., Manning, T.A., et al.: Enhanced mixing with streamwise vorticity. Prog. Aerosp. Sci. 33, 323–351 (1997)
Smith, L.L., Majamaki, A.J., Lam, I.T., et al.: Mixing enhancement in a lobed injector. Phys. Fluids 9(3), 667–678 (1997)
MANASSEH, Richard, RIBOUX, Guillaume, RISSO, Frédéric: Sound generation on bubble coalescence following detachment. Int. J. Multiphas. Flow 34(10), 938–949 (2008)
ZHAO, Y.-F., IRONS, G.A.: The breakup of bubbles into jets during submerged gas injection. Metallurgy Trans. B 21(6), 997–1003 (1990)
HongHui, Shi, BoYi, Wang, ZhenQing, Dai: Research on the mechanics of underwater supersonic gas jets. Sci. China 53(3), 527–535 (2010)
Longuet-Higgins, M.S.: An analytic model of sound production by raindrops. J. Fluid Mech. 214, 395–410 (1990)
Acknowledgments
The authors would like to thank Weiping Dai, Zongrui Hao and Weiwei Xu for building the experimental set-up.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Miao, T., Dmitriy, L., Liu, J. et al. Study on the Flow and Acoustic Characteristics of Submerged Exhaust Through a Lobed Nozzle. Acoust Aust 43, 283–293 (2015). https://doi.org/10.1007/s40857-015-0027-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40857-015-0027-2