Abstract
Laser-driven white lighting is attracting attention due to its advantages compared to LED-based white lighting systems, such as high luminous intensity, high efficacy, and the possibility of miniaturization. The optical efficiency of a lighting system based on high-power laser diodes (LDs) is highly affected by the temperature of the LD and phosphor, meaning cooling is critical for many practical applications. The junction temperature must be properly predicted and controlled to prevent failure of the LD. This paper presents a thermal dynamic model of an LD cooling system for predicting the junction temperature and an experiment to validate the model. The system consists of an LD, heat spreader, heat sink, and liquid pump. The system was placed inside a test chamber, and the temperature of each element was measured under various ambient temperatures. The results were then compared with the simulation results. A heat spreader was designed with liquid cooling channels based on the model in consideration of both the thermal resistance and pressure drop. The spreader was then fabricated using 3D metal printing. The spreader provided higher performance compared with thermoelectric cooling.
Similar content being viewed by others
Abbreviations
- h:
-
Convective coefficient (W/m2K)
- k:
-
Thermal conductivity (W/mK)
- D:
-
Diameter (m)
- r:
-
Radius of curvature (m)
- Q:
-
Heat input (W)
- L:
-
Channel length (m)
- ρ:
-
Density (Kg/m3)
- V:
-
Velocity (m/s)
References
Lee, D., Joo, J., and Lee, S., “Modeling of Reflection-Type Laser-Driven White Lighting Considering Phosphor Particles and Surface Topography,” Optics Express, Vol. 23, No. 15, pp. 18872–18887, 2015.
Ulrich, L., “Whiter Brights with Lasers,” Spectrum, Vol. 50, No. 11, pp. 36–56, 2013.
Wang, J., Cai, Y.-X., Zhao, X.-J., and Zhang, C., “Thermal Design and Simulation of Automotive Headlamps Using White LEDs,” Microelectronics Journal, Vol. 45, No. 2, pp. 249–255, 2014.
Zhao, D. and Tan, G., “A Review of Thermoelectric Cooling: Materials, Modeling and Applications,” Applied Thermal Engineering, Vol. 66, No. 1, pp. 15–24, 2014.
Beach, R., Benett, W. J., Freitas, B. L., Mundinger, D., Comaskey, B. J., et al., “Modular Microchannel Cooled Heatsinks for High Average Power Laser Diode Arrays,” Journal of Quantum Electronics, Vol. 28, No. 4, pp. 966–976, 1992.
Lorenzen, D., Bonhaus, J., Fahrner, W. R., Kaulfersch, E., Worner, E., et al., “Micro Thermal Management of High-Power Diode Laser Bars,” Transactions on Industrial Electronics, Vol. 48, No. 2, pp. 286–297, 2001.
Chein, R. and Huang, G., “Thermoelectric Cooler Application in Electronic Cooling,” Applied Thermal Engineering, Vol. 24, No. 14, pp. 2207–2217, 2004.
Huang, M. and Yang, L., “Heat Generation by the Phosphor Layer of High-Power White LED Emitters,” Photonics Technology Letters, Vol. 25, No. 14, pp. 1317–1320, 2013.
Karnopp, D., “Bond Graph Models for Electrochemical Energy Storage: Electrical, Chemical and Thermal Effects,” Journal of the Franklin Institute, Vol. 327, No. 6, pp. 983–992, 1990.
Bond Graph, https://en.wikipedia.org/wiki/Bond_graph, (Accessed 16 MAR 2018)
Garcia, J., Dauphin-Tanguy, G., and Rombaut, C., “Electrothermal Bond Graph Model for Semiconductor Switching Devices,” Proc. of the Applied Power Electronics Conference and Exposition, Vol. 1, pp. 258–263, 1996.
Garcia, J., Dauphin-Tanguy, G., and Rombaut, C., “Modeling and Simulating the Dynamic Electrothermal Behavior of Power Electronic Circuits Using Bond Graphs,” Proc. of the 27th Annual IEEE Power Electronics Specialists Conference, Vol. 2, pp. 1641–1647, 1996.
Feenstra, P. J., Manders, E. J., Mosterman, P. J., Biswas, G., and Barnett, R. J., “Modeling and Instrumentation for Fault Detection and Isolation of a Cooling System,” Proc. of the IEEE Southeastcon, pp. 365–372, 2000.
Feenstra, P. J., Mosterman, P. J., Biswas, G., and Breedveld, P. C., “Bond Graph Modeling Procedures for Fault Detection and Isolation of Complex Flow Processes,” Proc. of the International Conference on Bond Graph Modeling and Simulation, pp. 77–82, 2001.
Kim, J. K., Nam, S. K., Nakayama, W., and Lee, S. K., “Compact Thermal Network Model of the Thermal Interface Material Measurement Apparatus with Multi-Dimensional Heat Flow,” Transactions on Components, Packaging and Manufacturing Technology, Vol. 1, No. 8, pp. 1186–1194, 2011.
Kim, J.-K., Nakayama, W., Ito, Y., Shin, S.-M., and Lee, S.-K., “Estimation of Thermal Parameters of the Enclosed Electronic Package System by Using Dynamic Thermal Response,” Mechatronics, Vol. 19, No. 6, pp. 1034–1040, 2009.
Pahor, S. and Strnad, “Die Nusseltsche Zahl für Laminare Strömung im Zylindrischen Rohr Mit Konstanter Wandtemperatur,” Journal of Applied Mathematics and Physics, Vol. 7, pp. 536–538, 1956.
Katou, Y., “Advanced Heat Transfer,” Yougentou Press, 1984.
Naphon, P. and Wongwises, S., “A Review of Flow and Heat Transfer Characteristics in Curved Tubes,” Renewable and Sustainable Energy Reviews, Vol. 10, No. 5, pp. 463–490, 2006.
Shah, R. K., “Laminar Flow Forced Convection Heat Transfer and flow Friction in Straight and Curved Ducts-a Summary of Analytical Solutions,” Ph.D. Thesis, Stanford University, 1971.
Missaggia, L. J., Walpole, J. N., Liau, Z. L., and Phillips, R. J., “Microchannel Heat Sinks for Two-Dimensional High-Power-Density Diode Laser Arrays,” Journal of Quantum Electronics, Vol. 25, No. 9, pp. 1988–1992, 1989.
Vermeersch, B. and De Mey, G., “Dependency of Thermal Spreading Resistance on Convective Heat Transfer Coefficient,” Microelectronics Reliability, Vol. 48, No. 5, pp. 734–738, 2008.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, Y., Park, S., Byun, C. et al. Liquid Cooling of Laser-driven Head Light Employing Heat Spreader Manufactured by 3D Metal Printing. Int. J. of Precis. Eng. and Manuf.-Green Tech. 5, 295–301 (2018). https://doi.org/10.1007/s40684-018-0031-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40684-018-0031-8