Abstract
This paper presents a novel approach to predict the propagation of hydraulic fractures in tight shale reservoirs. Many hydraulic fracture modelling schemes assume that the fracture direction is pre-seeded in the problem domain discretisation. This is a severe limitation as the reservoir often contains large numbers of pre-existing fractures that strongly influence the direction of the propagating fracture. To circumvent these shortcomings, a new fracture modelling treatment is proposed where the introduction of discrete fracture surfaces is based on new and dynamically updated geometrical entities rather than the topology of the underlying spatial discretisation. Hydraulic fracturing is an inherently coupled engineering problem with interactions between fluid flow and fracturing when the stress state of the reservoir rock attains a failure criterion. This work follows a staggered hydro-mechanical coupled finite/discrete element approach to capture the key interplay between fluid pressure and fracture growth. In field practice, the fracture growth is hidden from the design engineer and microseismicity is often used to infer hydraulic fracture lengths and directions. Microseismic output can also be computed from changes of the effective stress in the geomechanical model and compared against field microseismicity. A number of hydraulic fracture numerical examples are presented to illustrate the new technology.
Similar content being viewed by others
References
Economides MJ, Martin T (2007) Modern fracturing enhancing natural gas production. Energy Tribune, Houston
King GE (2010) Thirty years of gas shale fracturing: what have we learned? In: Proceedings of the SPE annual technical conference and exhibition, Florence, Italy 19–22 September, SPE 133456
Cipolla CL, Lolon EP, Erdle JC, Rubin B (2010) Reservoir modelling in shale-gas reservoirs. In: Proceedings of the SPE eastern region meeting, Charleston, West Virginia, USA, 23–25 September, SPE 15530
Khoei AR (2015) Extended finite element method: theory and applications. Wiley, Chichester
Economides MJ, Nolte KG (2000) Reservoir stimulation. Wiley, New York
Matthews HL, Schein G, Malone M (2007) Simulation of gas shales; they’re all the same—right? In: Proceedings of the hydraulic fracturing technology conference, College Station, Texas, USA, 29–31 January, SPE 106070
Mayerhofer MJ, Lolon EP, Warpinski NR, Cipolla CL, Walser D, Rightmire CM (2008) What is stimulated reservoir volume? In: Proceedings of the shale gas production conference, Fort Worth, Texas, USA, 16–18 November, SPE 119890
Jones J, Britt JZ (2005) Design and appraisal of hydraulic fractures. Society of Petroleum Engineers, Richardson
Yew CH, Weng X (2015) Mechanics of hydraulic fracturing. Gulf Professional Publishing, Waltham
Belytschko T, Liu WK, Moran B (2000) Nonlinear finite elements for continua and structures. Wiley, Chichester
Wu SR, Giu L (2012) Introduction to the explicit finite element method for nonlinear transient dynamics. Wiley, Hoboken
Alqahtani NB, Miskimins JL (2010) 3D finite element modeling of laboratory hydraulic fracture experiments. In: Proceedings of the annual conference, Barcelona, Spain, 14–17 June, SPE 130556
Nassir M, Settari A, Wan H (2012) Prediction and optimization of fracturing in tight gas and shale using a coupled geomechanical model of combined tensile and shear fracturing. In: Hydraulic fracture technology conference, The Woodlands, Texas, USA, 6–8 February, SPE 152200
Cipolla CL, Warpinski NR, Mayerhofer MJ, Lolon EP, Vincent MC (2010) The relationship between fracture complexity, reservoir properties and fracture-treatment design. In: Annual technical conference and exhibition, Denver, Colorado, USA, 21–24 September, SPE 115769
Weng X, Kresse O, Cohen C, Wu R, Gu H (2011) Modeling of hydraulic-fracture-network propagation in a naturally fractured formation. In: Hydraulic fracturing technology conference, The Woodlands, Texas, USA, 24–26 January, SPE 140253
Kresse O, Cohen C, Weng X, Wu R, Gu H (2011) Numerical modeling of hydraulic fracturing in naturally fractured formations. In: 45th US rock mechanic/geomechanics symposium, San Francisco, CA, 26–29 June
McClure MC (2012) Modeling and characterization of hydraulic stimulation and induced seismicity in geothermal and shale gas reservoirs. PhD Thesis, Stanford University
Munjiza A (2004) Combined finite-discrete element method. Wiley, Chichester
Gordeliy E, Peirce A (2013) Coupling schemes for modelling hydraulic fracture propagation using the XFEM. Comput Method Appl Mech Eng 253:305–322
Lisjak A, Liu Q, Zhao Q, Mahabadi OK, Grasselli G (2013) Numerical simulation of acoustic emission in brittle rocks by two-dimensional finite-discrete element analysis. Geophys J Int 195:423–443
Kolditz O, Delfs J-O, Burger C, Beinhorn M, Park C-H (2008) Numerical analysis of coupled hydrosystems based on an objected compartment approach. J Hydroinform 10:227–244
Kolditz O, Gorke U-J, Shao H, Wang W (2012) Thermo–hydro-mechanical–chemical processes in fractured porous media. Springer
Wang W, Kolditz O (2004) Object-oriented finite element analysis of thermos-hydro-mechanical (THM) problems in porous media. Int J Numer Eng 69:162–201
ELFEN TGR manual (2014) Rockfield Software Ltd
Kim J (2010) Sequential methods for coupled geomechanics and multiphase. PhD Thesis, Stanford University
Bai M, Elsworth D (2000) Coupled processes in subsurface deformation, flow, and transport. ASCE Press, Reston
Diersch HJ (2013) FEFLOW: finite element modeling of flow, mass and heat transport in porous and fractured media. Springer, Berlin
Lobao MC (2007) Finite element modelling of hydraulic fracture flow in porous media. PhD Thesis, Swansea University
Valko P, Economides MJ (1995) Hydraulic fracture mechanics. Wiley, London
Lewis RW, Schrefler JZ (1998) The finite element method in the static and dynamic deformation and consolidation of porous media. Wiley, New York
Klerck PA (2000) The finite element modelling of discrete fracture in quasi-brittle materials. PhD Thesis, Swansea University
Bazant PZ, Planas J (1997) Fracture size effect in concrete and other quasi-brittle materials. CRC Press
Crook AJL, Willson SM, Yu JG, Owen DRJ (2006) Predictive modelling of structure evolution in sandbox experiments. J Struct Geol 28:729–744
Crook T, Willson S, Yu JG, Owen R (2003) Computational modelling of the localized deformation associated with borehole breakout in quasi-brittle materials. J Pet Sci Eng 38:177–186
Bai M (2011) Improved understanding of fracturing tight-shale gas formations. In: Proceedings of the production and operation symposium, Oklahoma City, Oklahoma, 27–29 March, SPE 140968
Williams BB (1970) Fluid loss from hydraulically induced fractures. J Pet Technol 22:882–888
Zienkiewicz OC, Taylor RL, Zhu JZ (2005) The finite element method: its basis and fundamentals. Butterworth-Heinemann, Oxford
Huang M, Yue ZQ, Tham LG, Zienkiewicz OC (2004) On the stable finite element procedures for dynamic problems of saturated porous media. Int J Numer Methods Eng 61:1421–1450
Minkoff SE, Stone CM, Bryant S, Peszynska M, Wheeler MF (2003) Coupled fluid flow and geomechanical deformation modeling. J Pet Sci Eng 38:37–56
Huang M, Wu S, Zienkiewicz OC (2001) Incompressible or nearly incompressible soil dynamic behaviour—a new staggered algorithm to circumvent restrictions of mixed formulation. Soil Dyn Earthq Eng 21:169–179
Barree RD, Gilbert JV (2009) Stress and rock property profiling for unconventional reservoir stimulation. In: Proceedings of the hydraulic fracturing technology conference, The Woodlands, Texas, USA, 19–21 January, SPE 118703
Olovsson L, Simonsson K, Unosson M (2005) Selective mass scaling for explicit finite element analyses. Int J Numer Methods Eng 63:1436–1445
Davies RJ, Mathias S, Moss J, Hustoft S, Newport L (2012) Hydraulic fractures: how far can they go? Mar Pet Geol 37:1–6
Peric D, Hochard CH, Dutko M, Owen DRJ (1996) Transfer operators for evolving meshes in small strain elasto-plasticity. Comput Methods Appl Mech Eng 137:331–344
Angus DA, Kendall JM, Fisher QJ, Segura JM, Skachkov S, Crook AJL, Dutko M (2010) Modelling microseismicity if a producing reservoir from coupled fluid-flow and geomechanical simulation. Geophys Prospect 58:901–914
Hazzard J, Young R (2002) Moment tensors and micromechanical models. Tectonophysics 356:181–197
Angus DA, Dutko M, Kristiansen TG, Fisher QJ, Kendall J-M, Baird AF, Verdon JP, Barkved OI, Yu J, Zhao S (2015) Integrated hydro-mechanical and seismic modelling of the Valhall reservoir: a case study of predicting subsidence, AVOA and microseismicity. Geomech Energy Environ 2:32–44
Wriggers P (2006) Computational contact mechanics. Springer, Heidelberg
Zhong ZH (1993) Finite element procedures for contact-impact problems. Oxford University Press, New York
Soliman MY, Augustine J (2010) Fracturing design aimed at enhancing fracture complexity. In: Proceedings of the annual conference, Barcelona, Spain, 14–17 June, SPE 130043
Medeiros F, Ozkan E, Kazemi H (2008) Productivity and drainage area of fractured horizontal wells in tight gas reservoirs. In: Proceedings of the Rocky Mountain oil and gas technology symposium, Denver, Colorado, USA, 16–18 April, SPE 108110
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Profit, M., Dutko, M., Yu, J. et al. Complementary hydro-mechanical coupled finite/discrete element and microseismic modelling to predict hydraulic fracture propagation in tight shale reservoirs. Comp. Part. Mech. 3, 229–248 (2016). https://doi.org/10.1007/s40571-015-0081-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40571-015-0081-4