Abstract
The applications of natural fibers composites are growing in many sectors such as automotive industry, furniture, packing and construction. This is mainly due to their advantages compared to synthetic fibers composites (i.e., low cost, low weight, abundant and renewable resources among others). Nowadays, all of the main international automotive manufactures use these materials and their use is expected to increase in this area. In this study, two analytical models: rule of hybrid mixtures modified (RoHM) and an analytical model based on classical lamination theory, were used to determine theoretically the elastic modulus of intra-ply natural fiber-reinforced hybrid composites. The predicted elastic modulus was compared further with the experimental elastic modulus of jute/ramie, jute/sisal and jute/curauá intra-ply hybrid composites. The prediction by the model based on classical lamination theory showed a good agreement with the experimental elastic modulus values with a maximum deviation of 10%, while the RoHM overpredicted the elastic modulus values with a maximum deviation of 44%. Other mechanical properties such as shear modulus and flexural modulus can also be predicted by the same model. The new approach presented can be adopted as a primary tool to predict the mechanical properties of intra-ply hybrid composites. However, there is still a possibility to refine the theoretical prediction of elastic modulus by accounting the curvature parameter due to interlacing of yarns in woven fabrics.
Similar content being viewed by others
References
Vijaya N, Rajkumara V, Bhattacharjee P (2016) Assessment of composite waste disposal in aerospace industries. Proc Environ Sci 35:563–570
Ribeiro MCS, Fiúza A, Ferreira A, de Lurded Dinis M, Castro ACM, Meixedo JP, Alvim MR (2016) Recycling approach towards sustainability advance of composite materials industry. Recycling 1:178–193
Dhakal HN, Zhang ZY, Richardson MOW (2007) Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos Sci Technol 67(7–8):1674–1683
Pickering KL, Efendy MGA, Le TM (2016) A review of recent developments in natural fibre composites and their mechanical performance. Compos A Appl Sci 83:98–112
Ho MP, Wang H, Lee JH, Ho CK, Lau KT, Leng J, Hu D (2012) Critical factors on manufacturing processes of natural fibre composites. Compos B 43:3549–3562
Ilyas RA, Sapuan SM, Sanyang ML, Ishak MR, Zainudin ES (2018) Nanocrystalline cellulose as reinforcement for polymeric matrix nanocomposites and its potential applications: a review. Curr Anal Chem 14(3):203–225
Sanyang ML, Ilyas RA, Sapuan SM, Jumaidin R (2018) Sugar palm starch-based composites for packaging applications. In: Jawaid M, Swain S (eds) Bio nanocomposites for packaging applications. Springer, Cham
Alavudeen A, Rajini N, Karthikeyan S, Thiruchitrambalan M, Venkateshwaren N (2015) Mechanical properties of banana/kenaf fiber-reinforced hybrid polyester composites: effect of woven fabric and random orientation. Mater Des 66:246–257
Abral H, Azmi Basri A, Muhammad F, Fernando Y, Hafizulhaq F, Mahardika M, Sugiarti E, Sapuan SM, Ilyas RA, Stephane I (2019) A simple method for improving the properties of the sago starch films prepared by using ultrasonication treatment. Food Hydrocoll 93:276–283
Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES (2018) Development and characterization of sugar palm nanocrystalline cellulose reinforced sugar palm starch bionanocomposites. Carbohyd Polym 202:186–202
Ilyas RA, Sapuan SM, Ishak MR, Zainudin ES (2018) Sugar palm nanocrystalline cellulose reinforced sugar palm starch composite: degradation and water-barrier properties. Mater Sci Eng 368:06–12
Ramesh M, Palanikumar K, Reddy KH (2013) Mechanical property evaluation of sisal–jute–glass fiber reinforced polyester composites. Compos B Eng 48:1–9
Dhakal HN, Zhang ZY, Guthrie R, Macumullen J, Bennett N (2013) Development of flax/carbon fibre hybrid composites for enhanced properties. Carbohyd Polym 96(1):1–8
Yun FS (2001) Hybrid effects on tensile properties of hybrid short-glass fiber-and short-carbon-fiber-reinforced polypropylene composites. J Mater Sci 36(5):1243–1251
Ahmed S, Vijayarangan S, Naidu ACB (2007) Elastic properties, notched strength and fracture criterion in untreated woven jute-glass fabric reinforced polyester hybrid composites. Mater Des 28:2287–2294
Ramesh M, Sudharsan P (2018) Experimental investigation of mechanical and morphological properties of flax-glass fiber reinforced hybrid composite using finite element analysis. Silicon 10(3):747–757
Ramesh M, Logesh R, Manikandan M, Nithyanandam SK, Pratap DV (2017) Mechanical and water intake properties of banana-carbon hybrid fiber reinforced polymer composites. Mater Res 20(2):365–376
Palanikumar K, Ramesh M, Reddy KH (2016) Experimental investigation on the mechanical properties of green hybrid sisal and glass fiber reinforced polymer composites. J Nat Fibers 13(3):321–331
Jarukumjorn K, Supakarn N (2009) Effect of glass fiber hybridization on properties of sisal fiber–polypropylene composites. Compos B Eng 40(7):623–627
Banerjee S, Sankar BV (2014) Mechanical properties of hybrid composites using finite element method based micromechanics. Compos B Eng 58:318–327
Mansori MR, Sapuan SM, Zainudin ES, Aziz NA, Hambali A (2013) Stiffness prediction of hybrid kenaf/glass fiber reinforced polypropylene composites using rule of mixtures (ROM) and rule of hybrid mixtures (RoHM). J Polym Mater 30(3):321–334
Islam MA, Begum K (2011) Prediction models for the elastic modulus of fiber-reinforced polymer composites: an analysis. J Sci Res 3(2):225–238
Ahmed KS, Vijayarangan S (2006) Elastic property evaluation of jute-glass fiber hybrid composite using experimental and CLT approach. Indian J Eng Mater Sci 13:435–442
Venkateshwaran N, Elayaperumal A, Sathiya GK (2012) Prediction of tensile properties of hybrid-natural fiber composites. Compos B Eng 43(2):793–799
Facca AG, Kortschot MT, Yan N (2006) Predicting the elastic modulus of natural fibre reinforced thermoplastics. Compos A Appl Sci 37(10):1660–1671
Facca AG, Kortschot MT, Yan N (2007) Predicting the tensile strength of natural fibre reinforced thermoplastics. Compos Sci Technol 67(11–12):2454–2466
Biagiotti J, Fiori S, Torre L, Lopez Manchado MA, Kenny JM (2004) Mechanical properties of polypropylene matrix composites reinforced with natural fibres: a statistical approach. Polym Compos 25(1):26–36
Cao Y, Wang W, Wang Q (2014) Application of mechanical model for natural fibre reinforced polymer composites. Mater Res Innov 18:354–357
Mirbagheri J, Tajvidi M, Ghasemi I, Hermanson JC (2007) Prediction of the elastic modulus of wood flour/kenaf fibre/polypropylene hybrid composites. Iran Polym J 16(4):271–278
Yihui P, Zheng Z (2015) The effect of hybridization on moisture absorption and mechanical degradation of natural fiber composites: an analytical approach. Compos Sci Technol 110:132–137
Jones RM (1975) Mechanics of composite material. Hemisphere Publishing Corporation, New York, p 86
Short D, Summerscales J (1982) New theoretical approach to the strength of fibre composite hybrid materials. In: 13th BPF reinforced plastic congress, Brighton, vol 53, pp 225–229
Halpin JL, Kardos KL (1976) The Halpin–Tsai equations: a review. Polym Eng Sci 16(5):344–352
Tucker CL, Liang E (1999) Stiffness predictions for unidirectional short-fibre composites: review and evaluation. Compos Sci Technol 59:655–671
Mallick PK (1997) Composite engineering handbook. Marcel Dekkar Inc, New York
Hyer MW (1998) Stress analysis of fiber-reinforced composite materials. WCB/McGraw-Hill, New York
Azzi VD, Tsai SW (1996) Strength of laminated composite materials. AIAA J 4(2):296–301
Cavalcanti DKK, Banea MD, Lima RAA, Neto JSS, da Silva LFM, Carbas RJC (2019) Mechanical characterization of intralaminar hybrid natural fibre composites. Compos B (submitted)
Lima RAA, Cavalcanti DKK, Neto JSS, Costa HRM, Banea MD (2019) Effect of surface treatments on interfacial properties of natural intralaminar hybrid composites. Polym Compos (accepted for publication)
Neto JSS, Lima RAA, Cavalcanti DKK, Souza JPB, Aguiar RAA, Banea MD (2019) Effect of Chemical treatment on the thermal properties of hybrid natural fibre reinforced composites. J Appl Polym Sci 136(10):47154
Acknowledgements
The authors would like to acknowledge the support of the Brazilian Research Agencies CNPq, CAPES and FAPERJ.
Author information
Authors and Affiliations
Corresponding author
Additional information
Technical Editor: Pedro Manuel Calas Lopes Pacheco, D.Sc..
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Budhe, S., de Barros, S. & Banea, M.D. Theoretical assessment of the elastic modulus of natural fiber-based intra-ply hybrid composites. J Braz. Soc. Mech. Sci. Eng. 41, 263 (2019). https://doi.org/10.1007/s40430-019-1766-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40430-019-1766-z