Skip to main content

Advertisement

SpringerLink
Log in

Friction and wear performance on ultrasonic vibration assisted grinding dental zirconia ceramics against natural tooth

  • Technical Paper
  • Published:
Journal of the Brazilian Society of Mechanical Sciences and Engineering Aims and scope Submit manuscript

Abstract

In order to further demonstrate the advantages and application prospects of ultrasonic vibration assisted grinding (UVAG) in ceramic dental restorations, this paper focused on friction and wear performance of the machined surfaces by UVAG and diamond grinding (DG) against natural teeth. Firstly, 3D roughness parameters, such as \(S_{sk}\), \(S_{ku}\) (height parameters, in ISO 25178-2), \(S_{tr}\) (spatial parameter, in ISO 25178-2), and \(S_{vi}\), \(S_{ci}\) (function parameters, in the Birmingham set of 14 parameters), were selected to characterize the surfaces machined by UVAG and DG. Secondly, the effects of machine parameters on 3D roughness parameters for two processing methods were discussed. Lastly, friction and wear experiments between sintered zirconia ceramics and natural teeth were conducted. It illuminated the effect mechanism of ultrasonic vibration and machine parameters on friction coefficients and wear loss. The results showed that the assistance of ultrasonic vibration could not only reduce friction coefficients (from 0.80 to 10.09 %), but also decrease the longitudinal wear depth of natural teeth. Besides, the teeth wear loss changed with the variation of spindle speed in the case of ultrasonic vibration assisted grinding.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. Carvalho AO, Bruzi G, Giannini M, Magne P (2014) Fatigue resistance of CAD/CAM complete crowns with a simplified cementation process. J Prosthet Dent 111(4):310–317

    Article  Google Scholar 

  2. Marchack BW, Sato S, Marchack CB, White SN (2011) Complete and partial contour zirconia designs for crowns and fixed dental prostheses: a clinical report. J Prosthet Dent 106(3):145–152

    Article  Google Scholar 

  3. Inokoshi M, Zhang F, De Munck J, Minakuchi S, Naert I, Vleugels J, Van Meerbeek B, Vanmeensel K (2014) Influence of sintering conditions on low-temperature degradation of dental zirconia. Dent Mater Off Publ Acad Dent Mater 30(6):669–678

    Google Scholar 

  4. Choi Y-J, Park K-H, Hong Y-H, Kim K-T, Lee S-W, Choi H-Z (2013) Effect of ultrasonic vibration in grinding; horn design and experiment. Int J Precis Eng Manuf 14(11):1873–1879

    Article  Google Scholar 

  5. Pei ZJ, Ferreira PM, Kapoor SG, Haselkorn M (1995) Rotary ultrasonic machining for face milling of ceramics. Int J Mach Tool Manuf 35(7):1033–1046

    Article  Google Scholar 

  6. Lauwers B (2011) Surface integrity in hybrid machining processes. Proced Eng 19:241–251

    Article  Google Scholar 

  7. Brecher C, Schug R, Weber A, Wenzel C, Hannig S (2009) New systematic and time-saving procedure to design cup grinding wheels for the application of ultrasonic-assisted grinding. Int J Adv Manuf Tech 47(1–4):153–159

    Google Scholar 

  8. Lv D, Huang Y, Tang Y, Wang H (2012) Relationship between subsurface damage and surface roughness of glass BK7 in rotary ultrasonic machining and conventional grinding processes. Int J Adv Manuf Tech 67(1–4):613–622

    Google Scholar 

  9. Ding K, Fu Y, Su H, Chen Y, Yu X, Ding G (2014) Experimental studies on drilling tool load and machining quality of C/SiC composites in rotary ultrasonic machining. J Mater Process Tech 214(12):2900–2907

    Article  Google Scholar 

  10. Lv D, Wang H, Tang Y, Huang Y, Li Z (2013) Influences of vibration on surface formation in rotary ultrasonic machining of glass BK7. Precis Eng 37(4):839–848

    Article  Google Scholar 

  11. Pei ZJ, Ferreira PM (1999) An experimental investigation of rotary ultrasonic face milling. Int J Mach Tool Manuf 39(8):1327–1344

    Article  Google Scholar 

  12. Pei ZJ, Prabhakar D, Ferreira MP, Haselkorn M (1995) A mechanistic approach to the prediction of material removal rates in rotary ultrasonic machining. J Manuf Sci Eng 117(2):142–151

    Google Scholar 

  13. Churi N, Pei ZJ (2009) Rotary ultrasonic machining of dental ceramics. Int J Mach Mach Mater 6(3–4):270–284

    Google Scholar 

  14. Li ZC, Cai LW, Pei ZJ, Treadwell C (2006) Edge-chipping reduction in rotary ultrasonic machining of ceramics: finite element analysis and experimental verification. Int J Mach Tool Manuf 46(12–13):1469–1477

    Article  Google Scholar 

  15. Nath C, Lim GC, Zheng HY (2012) Influence of the material removal mechanisms on hole integrity in ultrasonic machining of structural ceramics. Ultrasonics 52(5):605–613

    Article  Google Scholar 

  16. Moita AS, Teodori E, Moreira ALN (2015) Influence of surface topography in the boiling mechanisms. Int J Heat Fluid Flow 52:50–63

    Article  Google Scholar 

  17. Guo Z, Yuan C, Yan X, Peng Z (2014) 3D Surface Characterizations of Wear Particles Generated from Lubricated Regular Concave Cylinder Liners. Tribol Lett 55(1):131–142

    Article  Google Scholar 

  18. Etsion I (2004) Improving tribological performance of mechanical components by laser surface texturing. Tribol Lett 17(4):733–737

    Article  Google Scholar 

  19. Ramiasa M, Ralston J, Fetzer R, Sedev R (2014) The influence of topography on dynamic wetting. Adv Colloid Interfac 206:275–293

    Article  Google Scholar 

  20. Aoki S, Fukada D, Yamada Y, Suzuki A, Masuko M (2013) Synergistic friction-reducing effects between the transverse direction of anisotropic surface roughness and the high-density adsorbed films under a boundary lubrication regime. Tribol Int 58:98–106

    Article  Google Scholar 

  21. Roy T, Choudhury D, Ghosh S, Mamat AB, Pingguan-Murphy B (2015) Improved friction and wear performance of micro dimpled ceramic-on-ceramic interface for hip joint arthroplasty. Ceram Int 41(1):681–690

    Article  Google Scholar 

  22. Li K, Yao Z, Hu Y, Gu W (2014) Friction and wear performance of laser peen textured surface under starved lubrication. Tribol Int 77(6):97C105

    Google Scholar 

  23. d’Incau E, Couture C, Maureille B (2012) Human tooth wear in the past and the present: tribological mechanisms, scoring systems, dental and skeletal compensations. Arch Oral Biol 57(3):214–229

    Article  Google Scholar 

  24. Zou L, Cherukara G, Hao P, Seymour K, Samarawickrama D (2009) Geometrics of tooth wear. Wear 266(5):605–608

    Article  Google Scholar 

  25. Heintze SD, Zellweger G, Sbicego S, Rousson V, Munoz-Viveros C, Stober T (2013) Wear of two denture teeth materials in vivo-2-year results. Dent Mater Off Publ Acad Dent Mater 29(9):e191–204

    Google Scholar 

  26. Coldea A, Swain MV, Thiel N (2013) In-vitro strength degradation of dental ceramics and novel PICN material by sharp indentation. J Mech Behav Biomed Mater 26:34–42

    Article  Google Scholar 

  27. Arsecularatne JA, Hoffman M (2010) On the wear mechanism of human dental enamel. J Mech Behav Biomed Mater 3(4):347–356

    Article  Google Scholar 

  28. Theocharopoulos A, Zou L, Hill R, Cattell M (2010) Wear quantification of human enamel and dental glassCceramics using white light profilometry. Wear 269(11–12):930–936

    Article  Google Scholar 

  29. Mormann WH, Stawarczyk B, Ender A, Sener B, Attin T, Mehl A (2013) Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behav Biomed Mater 20:113–125

    Article  Google Scholar 

  30. Ramalho A, Braga de Carvalho MD, Antunes PV (2013) Effects of temperature on mechanical and tribological properties of dental restorative composite materials. Tribol Int 63:186–195

    Article  Google Scholar 

  31. Xiao XZ, Zheng K, Liao WH (2014) Theoretical model for cutting force in rotary ultrasonic milling of dental zirconia ceramics. Int J Adv Manuf Technol 75:1263–1277

    Article  Google Scholar 

  32. Braden M (1976) Biophysics of the tooth. Front Oral Physiol 2:1–37

    Article  Google Scholar 

  33. Mörmann WH, Stawarczyk B, Ender A, Sener B, Attin T, Mehl A (2013) Wear characteristics of current aesthetic dental restorative CAD/CAM materials: two-body wear, gloss retention, roughness and Martens hardness. J Mech Behav Biomed Mater 20:113–125

    Article  Google Scholar 

  34. Ramalho A, Carvalho BD, Antunes PV (2013) Effects of temperature on mechanical and tribological properties of dental restorative composite materials. Tribol Int 63(7):186–195

    Article  Google Scholar 

Download references

Acknowledgments

This work was financially supported by the National Natural Science Foundation of China (Grant No. 51305206), the Fundamental Research Funds for the Central Universities (Grant No. 30915011304) and the Graduate Research and Innovation Projects of Jiangsu Province (Grant No. KYLX15_0342).

Author information

Authors and Affiliations

  1. School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China

    Kan Zheng, Zhihua Li, Wenhe Liao & Xingzhi Xiao

Authors
  1. Kan Zheng
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Zhihua Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Wenhe Liao
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Xingzhi Xiao
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Kan Zheng.

Additional information

Technical Editior: Márcio Bacci da Silva.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zheng, K., Li, Z., Liao, W. et al. Friction and wear performance on ultrasonic vibration assisted grinding dental zirconia ceramics against natural tooth. J Braz. Soc. Mech. Sci. Eng. 39, 833–843 (2017). https://doi.org/10.1007/s40430-016-0531-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40430-016-0531-9

Keywords

Search

Navigation