Abstract
This paper contains the investigation of tensile, compression and impact characterization of SiC, Al2O3 reinforced Aluminium 6061-T6 matrix hybrid composite. Hybrid matrix composite fabrication was done by stir casting method. An attempt has been made by keeping Al2O3 percentage (7%) constant and increasing SiC percentage (10, 15, and 20%). After fabricating, the samples were prepared and tested to find out the various mechanical properties like tensile, compressive, and impact strength of the developed composites of different weight % of silicon carbide and Alumina in Aluminium alloy. The main objective of the study is to compare the values obtained and choose the best composition of the hybrid matrix composite from the mechanical properties point of view.
Similar content being viewed by others
References
Nagaral M. Bharath V, V. Auradi, S.A. Kori, Preparation of 6061Al–Al2O3 MMC’s by stir casting and evaluation of mechanical and wear properties. Tribol. Int. 39, 213–220 (2006)
A. Saravanakumar, P. Sasikumar, S. Sivasankaran, Synthesis and mechanical behavior of AA 6063-X wt% Al2O3- 1% Gr (X = 3, 6, 9 And 12 wt%) hybrid composites. Procedia Eng. 97, 951–960 (2014)
M.H. Rahman, H.M. Al Rashed, Characterization of silicon carbide reinforced aluminum matrix composites. Procedia Eng. 90, 103–109 (2014)
H. Kala, K.K.S. Mer, S. Kumar, A review on mechanical and tribological behaviors of stir cast aluminum matrix composites. Procedia Mater. Sci. 6, 1951–1960 (2014)
K. Umanath, K. Palanikumar, S.T. Selvamani, Analysis of dry sliding wear behavior of al6061/sic/al2o3 hybrid metal matrix composites. Compos. B 53, 159–168 (2013)
K. Kalaiselvan, N. Murugan, Siva Parameswaran, Production and characterization of AA6061–B4C stir cast composite. Mater. Des. 32, 4004–4009 (2011)
M.V. Krishna, A.M. Xavior, An investigation on the mechanical properties of hybrid metal matrix composites. Procedia Eng. 97, 918–924 (2014)
L.M. Tham, M. Gupta, L. Cheng, Effect of limited matrix-reinforcement interfacial reaction on enhancing the mechanical properties of aluminium–silicon carbide composites. Acta Materialia 49, 3243–3253 (2001)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Murugan, S.S., Jegan, V. & Velmurugan, M. Mechanical Properties of SiC, Al2O3 Reinforced Aluminium 6061-T6 Hybrid Matrix Composite. J. Inst. Eng. India Ser. D 99, 71–77 (2018). https://doi.org/10.1007/s40033-017-0142-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40033-017-0142-3