Abstract
The article presents an experimental investigation of the charging of phase change material (PCM) inside a concentric annular cavity of horizontal and vertical heat exchangers. A heat transfer fluid (HTF) passes through the inner pipe at three temperatures of 60, 70 and 80 °C. The experimental results exhibited that conduction dominates the initial stages of the charging process. As time advances, the buoyancy-driven convection develops and speeds up the charging at the upper portion of the two heat exchangers’ orientations. It is also observed that the charging rate is influenced by the inlet water temperature and the orientation of the heat exchangers. The melting times are reduced by about 27.5%, 46.3% for an inlet temperature change from 60 to 70 °C and 60 to 80 °C, respectively, in the horizontal heat exchanger. The melting time decreases by 32.6% and 50.2% in the vertical heat exchanger for the same temperature differences. In addition, the transient Nusselt number has the same behaviour for two orientations and changes positively with an inlet temperature of HTF. Moreover, the stored energy within PCM increases with the amount of transferred energy from HTF and its temperature.
Similar content being viewed by others
References
Al Siyabi I, Khanna S, Mallick T, Sundaram S (2019) An experimental and numerical study on the effect of inclination angle of phase change materials thermal energy storage system. J Energy Storage 23:57–68
Ansyah PR, Waluyo J, Najib SM, Anggara F, Thermal behavior of melting paraffin wax process in cylindrical capsule by experimental study, American Institute of Physics (2018) 020008
Azad, M, Groulx, D, Dineshan, D, Donaldson, A, Melting of phase change materials in a cylindrical enclosure: parameters influencing natural convection onset. Proceeding of the 4th International Forum on Heat Transfer, At Sendai (Japan) (2016)
Cao X, Yuan Y, Xiang B, Haghighat F (2018) Effect of natural convection on melting performance of eccentric horizontal shell and tube latent heat storage unit. Sustain Urban Areas 38:571–581
Dhaidan NS (2017) Melting phase change of n-eicosane inside triangular cavity of two orientations. J Renew Sustain Energy 9:054101
Dhaidan NS (2019) Thermal performance of constrained melting of PCM inside elliptical capsule of two orientations. Iran J Sci Technol Trans Mech Eng, article in press
Dhaidan NS, Khodadadi JM (2015) Melting and convection of phase change materials in different shape containers: a review. Renew Sustain Energy Rev 43:449–477
Dutta R, Atta A, Dutta TK (2008) Experimental and numerical study of heat transfer in horizontal concentric annulus containing phase change material. Can J Chem Eng 86:700–710
Ettouney H, El-dessouky H, Al-kandari E (2004) Heat transfer characteristics during melting and solidification of phase change energy storage process. Ind Eng Chem Res 43(17):5350–5357
Faghani M, Hosseini MJ, Bahrampoury R (2017) Numerical simulation of melting between two elliptical cylinders. Alex Eng J 57(2):1–10
Gao Z, Yao Y, Wu H (2019) A visualization study on the unconstrained melting of paraffin in spherical container. Appl Therm Eng 155:428–436
Hong Y, Ye W, Du, (2019) J, Huang, S, Solid-liquid phase-change thermal storage and release behaviors in a rectangular cavity under the impacts of mushy region and low gravity. Int J Heat Mass Transf 130:1120–1132
Khillarkar DB, Gong ZX, Mujumdar AS (2000) Melting of a phase change material in concentric horizontal annuli of arbitrary cross-section. Appl Therm Eng 20:893–912
Khodadadi JM, Zhang Y (2001) Effects of buoyancy-driven convection on melting within spherical containers. Int J Heat Mass Transf 44:1605–1618
Khot SA, Sane NK, Gawali BS (2011) Experimental investigation of phase change phenomena of paraffin wax inside a capsule. Int J Eng Trends Technol 2:67–71
Kousksou T, Mahdaoui M, Ahmed A, Msaad AA (2014) Melting over a wavy surface in a rectangular cavity heated from below. Energy 64:212–219
Kurnia JC, Sasmito AP, Ping SI (2017) Investigation of heat transfer on a rotating latent heat energy storage. Energy Procedia 105:4173–4178
Moffat RJ (1988) Describing the uncertainties in experimental result. Exp Thermal Fluid Sci 1(1):3–17
Ng KW, Gong ZX, Mujumdar AS (1998) Heat Transfer in free convection-dominated melting of a phase change material in a horizontal annulus. Heat Mass Transfer 25:631–640
Regin FA, Solanki SC, Saini JS (2006) Latent heat thermal energy storage using cylindrical capsule: numerical and experimental investigations. Renew Energy 31:2025–2041
Sharma RK, Ganesan PV, Tyagi VH, Metselaar SC, Sandaran SC (2015) Developments in organic solid-liquid phase change materials and their applications in thermal energy storage. Energy Convers Manage 95:193–228
Shmueli H, Ziskind G, Letan R (2010) Melting in a vertical cylindrical tube: numerical investigation and comparison with experiments. Int J Heat Mass Transf 53:4082–4091
Tan FL, Hosseinizadeh SF, Khodadadi JM, Fan L (2009) Experimental and computational study of constrained melting of phase change materials (PCM ) inside a spherical capsule. Int J Heat Mass Transf 52:3464–3472
Waghmare AV, Pise AT (2015) Numerical investigation of concentric cylinder latent heat storage with/without gravity and buoyancy. Energy Procedia 75:3133–3141
Wang Y, Wang L, Xie N, Lin X, Chen H (2016) Experimental study on the melting and solidification behavior of erythritol in a vertical shell-and-tube latent heat thermal storage unit. Int J Heat Mass Transf 99:770–781
Wang Y, Dai J, An D (2018) Numerical investigations on melting behavior of phase change material in a rectangular cavity at different inclination angles. Appl Sci 8(9):1627
Wei, L, Xinguo, L, Jun, Z, Numerical study of melting in a square annulus. IEEE International Conference on Mechanic Automation and Control Engineering, Wuhan, China (2010)
Yanxia D, Yanping Y, Daiyong J, Baoyi C, Jinfeng M (2007) Experimental investigation on melting characteristics of ethanolamine – water binary mixture used as PCM. Int Commun Heat Mass Transfer 34:1056–1063
Younsi Z, Joulin A, Zalewski L (2009) Phase change materials: a numerical method for the behavior predictions adiabatic wall liquid. Therm Eng Theory Appl 33:1–7
Acknowledgements
The authors wish to thank all who assisted in conducting this work.
Author information
Authors and Affiliations
Corresponding author
Additional information
Editorial responsibility: Babatunde Femi Bakare.
Rights and permissions
About this article
Cite this article
Dukhan, W.A., Dhaidan, N.S., Al-Hattab, T.A. et al. Phase-change of paraffin inside heat exchangers: an experimental study. Int. J. Environ. Sci. Technol. 19, 3155–3164 (2022). https://doi.org/10.1007/s13762-021-03367-2
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13762-021-03367-2