Abstract
As a result of their lower weight and higher strength-to-weight ratio, composite materials are gaining popularity in the automotive sector. Due to their superior mechanical qualities, synthetic hybrid fibres are also utilised in the automotive industry. Still, natural/synthetic hybrid fibres are gradually replacing the synthetic fibre composite to lessen the world’s reliance on manufactured materials. Traditional hand layup is used to create three different composite laminates in this study: natural, synthetic and natural/synthetic fibre. The three laminates use jute fibre (corchorus), spandex (elastane) fibre and jute/spandex interwoven fibres as reinforcements; the weight fraction of reinforcement is 45%; the epoxy matrix is 50%, and granite nanoparticles are 5%; the dynamical effect and thermal stability of the hybrid composite are analysed and quantified by changing the weight fraction of reinforcement in the blend. The hybridisation of jute fibre and spandex fibre–interlaced mat loading (jute/spandex) achieved a maximum storage modulus of 2300 MPa at the glass transition temperature, along with improved results in visco-elastic characteristics and 8 per cent greater, 431 °C of thermal stability compared to samples A and B. After composite laminates were fabricated, their layer adhesion and surface finishing were characterised by scanning electron microscopy (SEM).
Similar content being viewed by others
Data availability
This is not applicable.
Code availability
This is not applicable.
References
Ahmad MAA, Abdul Majid MS, Ridzuan MJM, Mazlee MN, Gibson AG (2018) Dynamic mechanical analysis and effects of moisture on mechanical properties of interwoven hemp/polyethylene terephthalate (PET) hybrid composites. Constr Build Mater 179:265–276
Chenga P, Wang K, Chen X, Wang J, Peng Y, Ahzic S, Chen C (2021) Interfacial and mechanical properties of continuous ramie fiber reinforced biocomposites fabricated by in-situ impregnated 3D printing. Industrial Crops and Products 170:113760. https://doi.org/10.1016/j.indcrop.2021.113760
Al-Ajrash SMN, Lafdi K (2019) The role of carbon and SiC crystallinities in the oxidation and mechanical property improvement of hybrid nano-fibres. Ceram Int 45(6):7286–7294
Cheng P, Peng Y, Wang K, Duigou AL, Yao S, Chen C (2023) Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites". Composite Structure 303(1):116313. https://doi.org/10.1016/j.compstruct.2022.116313
Cai R, Lin H, Cheng P, Zhang Z, Wang K, Peng Y, Wu Y, Ahzi S (2022) Investigation on dynamic strength of 3D-printed continuous ramie fiber reinforced biocomposites at various strain rates using machine learning methods 43(8):5235–5249. https://doi.org/10.1002/pc.26816
Chandrasekhara Rao PV (2020) Effects of matrix modification on mechanical and durability characteristics of polymer composites through variations in micro fillers, macro fillers and fibres. Constr Build Mater 235:117505
Raja T, Anand P, Sundarraj M, Karthick M, Kannappan A (2018) Failure analysis of natural fibre reinforced polymer composite leaf spring. International Journal of Mechanical Engineering and Technology 9(2):686–689
Chee SS, Jawaid M, Sultan MTH, Alothman OY, Abdullah LC (2019) Thermomechanical and dynamic mechanical properties of bamboo/woven kenaf mat reinforced epoxy hybrid composites. Compos B Eng 163:165–174
Natrayan L, Maharshi S, Senthil Kumar M (2017) An experimental investigation on mechanical behaviour of SiCp reinforced Al 6061 MMC using squeeze casting process. Inter J Mech Prod Engi Res Develop 7(6):663–668
Fouad H, Mourad AHI, ALshammari BA, Hassan MK, Abdalla MY, Hashem M (2020) Fracture toughness, vibration modal analysis and viscoelastic behavior of Kevlar, glass, and carbon fibre/epoxy composites for dental-post applications. J Mech Behav Biomedic Mater 101:103456
Gheith MH, Aziz MA, Ghori W, Saba N, Asim M, Jawaid M, Alothman OY (2019) Flexural, thermal and dynamic mechanical properties of date palm fibres reinforced epoxy composites. J Market Res 8(1):853–860
Gunge A, Koppad PG, Nagamadhu M, Kivade SB, Murthy KVS (2019) Study on mechanical properties of alkali treated plain woven banana fabric reinforced biodegradable composites. Compos Commun 13:47–51
Sudalaimuthu G, Rathinam S, Munuswamy DB, Thirugnanasambandam A, Devarajan Y (2018) Testing and evaluation of performance and emissions characteristics of water-biodiesel aspirated research engine. J Test Eval 48(5):20180306. https://doi.org/10.1520/jte20180306
Hashim N, Majid DLA, Mahdi ES, Zahari R, Yidris N (2019) Effect of fibre loading directions on the low cycle fatigue of intraply carbon-Kevlar reinforced epoxy hybrid composites. Composite Structures 212:476–483
Joshi A, Savnur S, Uppin VS, Gouda PSS, Sridhar I, Veereshkumar GB (2018) Visc using dynamic mechanical analyzer, viscoelastic behavior of cellulose coated glass/kevlar epoxy composite laminates terials. Today Proc 5(11):25486–25493
Karthik K, Rajamani D, Manimaran A, Udayaprakash J (2020) Evaluation of tensile properties on glass/carbon/Kevlar fibre reinforced hybrid composites. Mater Today: Proc 39:1655–1660
Lyu GJ, Qiao JC, Pelletier JM, Zhang L, Zhang HF, Yao Y (2020) Dynamic mechanical behaviors of a metastable β-type bulk metallic glass composite. J Alloy Compd 819:153040
Ravichandran S, Vengatesan E, Ramakrishnan A (2020) Synthesis and dynamic mechanical analysis of fibre reinforced low-density polyethylene hybrid polymer composites. Mater Today: Proc 27:177–180
Raja T, Anand P (2022) Investigations on Dynamic mechanical analysis and crystalline effect of neem/banyan fibre–reinforced hybrid polymer composite. J Test Eval 50(1):479–489
Kumar M, Senthil L, Natrayan RD, Hemanth K. Annamalai, Karthick E (2018) Experimental investigations on mechanical and microstructural properties of Al2O3/SiC reinforced hybrid metal matrix composite. IOP Conf Ser: Mater Sci Eng 402(1):012123
Salman SD (2020) Effects of jute fibre content on the mec composites’ mechanical and dynamic properties structural applications. Def Technol 16(6):1098–1105
Saxena M, Gupta MK (2018) Hybrid mango/shorea robusta wood reinforced epoxy composite: crystalline behavior and dynamic mechanical analysis. Mater Today: Proc 5(9):19359–19366
Natrayan L and Senthil Kumar M (2020) Influence of silicon carbide on tribological behaviour of AA2024/Al2O3/SiC/Gr hybrid metal matrix squeeze cast composite using Taguchi technique. Mater Res Exp 6(12): 1265f9
Karthik K, Rajamani D, Manimaran A, Udayaprakash J (2020) (2020) Evaluation of tensile properties on glass/carbon/Kevlar fibre reinforced hybrid composites. Materials Today: Proceedings 39:1655–1660
Sathish T, Palani K, Natrayan L, Merneedi A, De Poures MV, DK Singaravelu (2021) Synthesis and characterization of polypropylene/ramie fiber with hemp fiber and coir fiber natural biopolymer composite for biomedical application. Int J Polymer Sci 2021: 8, Article ID 2462873
Raja T, Anand P (2019) Evaluation of thermal stability and thermal properties of neem/banyan reinforced hybrid polymer composite. Mater Charact 8(1):481–490
Jawaid M, Abdul K, Abu Bakar A (2011) Woven hybrid composites: tensile and flexural properties of oil palm-woven jute fibres based epoxy composites. Mater Sci Eng A 528:5190–5195
Santhosh MS, Sasikumar R, Natrayan L, Kumar MS, Elango V, Vanmathi M (2018) Investigation of mechanical and electrical properties of kevlar/e-glass and basalt/e-glass reinforced hybrid composites. International Journal of Mechanical and Production Engineering Research and Development 8(3):591–598. https://doi.org/10.24247/ijmperdjun201863
Senturk O, Senturk AE, Palabiyik M (2018) Evaluation of hybrid effect on the thermo mechanical and mechanical properties of calcite/SGF/PP hybrid composites. Compos Part B Eng 140:68–77
Mohanavel V, Ravichandran M (2019) Experimental investigation on mechanical properties of AA7075-AlN composites. Mater Test 61(6):554–558. https://doi.org/10.3139/120.111354
Sabarinathan P, Annamalai VE, Vishal K, Nitin MS, Natrayan L, Veeeman D, Mammo WD (2022) Experimental study on removal of phenol formaldehyde resin coating from the abrasive disc and preparation of abrasive disc for polishing application. Adv Mater Sci Eng 2022: 8
Chee SS, Jawaid M, Sultan MTH (2017) Thermal stability and dynamic mechanical properties of kenaf/bamboo fibre reinforced epoxy composites. Bio Res 12:7118–7132
Yogeshwaran S, Prabhu R, Natrayan L, Murugan R (2015) Mechanical properties of leaf ashes reinforced aluminum alloy metal matrix composites. Int J Appl Eng Res 10(13):11048–11052
Jawaid M, Abdul Khalil HPS, Alattas OS (2012) Woven hybrid bio composites: Dynamic mechanical and thermal properties. Compos Part A Appl Sci Manuf 43:288–293
Mohanavel V, Suresh Kumar S, Vairamuthu J, Ganeshan P, NagarajaGanesh B (2022) Influence of stacking sequence and fiber content on the mechanical properties of natural and synthetic fibers reinforced penta-layered hybrid composites. Journal of Natural Fibers 19(13):5258–5270. https://doi.org/10.1080/15440478.2021.1875368
Santhosh MS, Sasikumar R, Natrayan L, Kumar MS, Elango V, Vanmathi M (2018) Investigation of mechanical and electrical properties of Kevlar/E-glass and Basalt/E-glass reinforced hybrid composites. Int J Mech Prod Eng Res Dev 8(3):591–598
Mohanavel V, Raja T, Yadav A, Ravichandran M, Winczek J (2022) Evaluation of mechanical and thermal properties of jute and ramie reinforced epoxy-based hybrid composites. J Nat Fibers 19(14):8022–8032. https://doi.org/10.1080/15440478.2021.1958432
Bunsell AR (2018) Hemp, jute, banana, kenaf, ramie, sisal fibres, Handbook of properties of textile and technical fibres 300–325
Mehar K, Panda SK, Mahapatra TR (2018) Nonlinear frequency responses of functionally graded carbon nanotube-reinforced sandwich curved panel under uniform temperature field. Int J App Mech 10
Mohanavel V, Ravichandran M, Sathish T, Kumar SS, Ravikumar M, Mahendiran S, Nathan LY (2019) Tribological and mechanical behaviour of composites fabricated via compo casting, stir casting and situ casting–an overview. J Balkan Tribol Assoc 25:342–352
Mohanavel V (2020) Mechanical and microstructural characterization of AA7178-TiB2 composites. Mater Test 62(2):146–150. https://doi.org/10.3139/120.111465
Raja T, Munuswamy DB, Francis RR, Vaidya G, Sundararaman S, Devarajan Y (2022) Experimental investigations on the effect of palm oil in kenaf fibre–reinforced basalt particulate hybrid biocomposite. Biomass Conv Bioref. https://doi.org/10.1007/s13399-022-02714-8
Ramesh M, Atreya TS, Aswin US, Eashwar H, Deepa C (2014) Processing and mechanical property evaluation of banana fibre reinforced polymer composites. Procedia Engineering 97:563–572
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Ethics approval
This is not applicable.
Consent to participate
This is not applicable.
Consent for publication
This is not applicable.
Conflicts of interest
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Raja, T., Devarajan, Y. Visco-elastic properties and thermal analysis of corchorus/elastane yarn–reinforced biocomposites. Biomass Conv. Bioref. (2023). https://doi.org/10.1007/s13399-023-03756-2
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13399-023-03756-2