Skip to main content
SpringerLink
Log in

Preparation and study on thermal conductive composites of chlorinated polyethylene rubber reinforced by boron nitride particles

  • Articles
  • Published:
Macromolecular Research Aims and scope Submit manuscript

Abstract

The composites of chlorinated polyethylene rubber (CM) filled with boron nitride (BN) were prepared and examined systematically. Scanning electron microscopy (SEM) was used to observe microscopic morphology of composites. Mechanical properties of composites were analyzed by a rubber process analyzer (RPA) and dynamic mechanical thermal analyzer (DMTA). Thermal conductivity as well as thermo stability of composites was improved by adding BN particles into the CM rubber. It was found that BN particles can reinforce the rubber matrix while they also break down the network of polymer chains and ruin the physical properties of the rubber matrix. During the dynamic compressing process, BN particles can transfer heat from the matrix and alleviate the heat build-up phenomenon. The BN/CM composites (volume content C BN=18%) with thermal conductivity 1.179 W/(m·K) and good flexibility (Elongation at break=320%) were prepared, which may be used as thermal interface materials in a dynamic compressing process.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. H. Pang, L. Xu, D. X. Yan, Z. M. Li, and Z. M. Li, Prog. Polym. Sci., 39, 1908 (2014).

    Article  CAS  Google Scholar 

  2. J. F. Zheng, Q. Y. He, and C. L. Liu, J. Membr. Sci., 476, 571 (2015).

    Article  CAS  Google Scholar 

  3. M. Wang, Z. Wang, N. Li, and L. S. Zhao, J. Membr. Sci., 495, 252 (2015).

    Article  CAS  Google Scholar 

  4. C. Y. Zhi, Y. Bando, C. C. Tang, and D. Golberg, Adv. Mater., 21, 2889 (2009).

    Article  CAS  Google Scholar 

  5. W. Y. Zhou, S. H. Qi, and Q. L. An, Mater. Res. Bull., 42, 1863 (2007).

    Article  CAS  Google Scholar 

  6. J. W. Gu, Q. Y. Zhang, J. Dang, P. Zhang, and S. J. Chen, Polym. Eng. Sci., 49, 1030 (2009).

    Article  CAS  Google Scholar 

  7. H. He, R. L. Fu, Y. Shen, Y. Han, and X. Song, Compos. Sci. Technol., 67, 2493 (2007).

    Article  CAS  Google Scholar 

  8. R. H. Baek, C. K. Baek, and H. S. Choi, IEEE Trans. Nanotechnol., 10, 417 (2011).

    Article  Google Scholar 

  9. W. Y. Zhou, C. F. Wang, T. Ai, K. Wu, J. Zhao, and H. Z. Gu, Compos. A, 40, 830 (2009).

    Article  Google Scholar 

  10. L. M. McGrath, R. S. Parnas, S. H. King, and S. H. King, Polymer, 49, 999 (2008).

    Article  CAS  Google Scholar 

  11. W. Y. Zhou, D. M. Yu, and C. Min, J. Appl. Polym. Sci., 112, 1695 (2009).

    Article  CAS  Google Scholar 

  12. T. Zhou, X. Wang, M. Y. Gu, and X. H. Liu, Polymer, 49, 4666 (2008).

    Article  CAS  Google Scholar 

  13. G. Gedler, M. Antunes, T. B. Tasciuc, J. I. Velasco, and R. Ozisik, Eur. Polym. J., 75, 190 (2016).

    Article  CAS  Google Scholar 

  14. Q. Liao, Z. Liu, and W. Liu, Sci. Rep., 5, (2015).

  15. B. L. Zhu, J. Ma, J. Wu, K. C. Yung, and C. S. Xie, J. Appl. Polym. Sci., 118, 2754 (2010).

    Article  CAS  Google Scholar 

  16. Z. H. Tang, H. L. Kang, Z. L. Shen, B. H. Guo, and L. Q. Zhang, Macromolecules, 45, 3444 (2012).

    Article  CAS  Google Scholar 

  17. X. Y. Hao, M. B. Lai, and G. S. Gai, Mater. Res. Innov., 18, 368 (2014).

    Article  CAS  Google Scholar 

  18. W. Y. Zhou, S. H. Qi, H. Z. Zhao, and N. L. Liu, Polym. Compos., 28, 23 (2007).

    Article  CAS  Google Scholar 

  19. Z. Q. Kuang, Y. L. Chen, Y. L. Lu, L. Liu, and L. Q. Zhang, Small, 11, 1655 (2015).

    Article  CAS  Google Scholar 

  20. Z. X. Zhang, C. H. Chen, X. W. Gao, K. K. Jin, and Z. X. Xin, J. Appl. Polym. Sci., 120, 1180 (2011).

    Article  CAS  Google Scholar 

  21. S. Kar, P. K. Maji, and A. K. Bhowmick, J. Mater. Sci., 45, 64 (2010).

    Article  CAS  Google Scholar 

  22. W. Y. Zhou, Thermochim. Acta, 512, 183 (2011).

    Article  CAS  Google Scholar 

  23. K. Wattranakul, H. Manuspiya, and N. Yanumet, J. Compos. Mater., 45, 1967 (2011).

    Article  Google Scholar 

  24. M. S. Nurul and M. Mariatti, J. Thermoplast. Compos., 26, 627 (2013).

    Article  CAS  Google Scholar 

  25. K. W. Stockelhuber, A. S. Svistkov, A. G. Pelevin, and G. Heinrich, Macromolecules, 44, 4366 (2011).

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Anhui Province Key Laboratory of Environment-friendly Polymer Materials, School of Chemistry and Chemical Engineering, Anhui University, Hefei, 230601, P. R. China

    Junjie Shu, Ru Xia, Jiasheng Qian, Jibin Miao, Lifen Su, Ming Cao, Hongyun Lin & Peng Chen

  2. Anhui Ningguo Zhongding Sealing Parts Co. Ltd., Ningguo, 242300, P. R. China

    Jinyang Chen

Authors
  1. Junjie Shu
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ru Xia
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Jiasheng Qian
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Jibin Miao
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Lifen Su
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Ming Cao
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Hongyun Lin
    View author publications

    You can also search for this author in PubMed Google Scholar

  8. Peng Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

  9. Jinyang Chen
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ru Xia.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Shu, J., Xia, R., Qian, J. et al. Preparation and study on thermal conductive composites of chlorinated polyethylene rubber reinforced by boron nitride particles. Macromol. Res. 24, 640–644 (2016). https://doi.org/10.1007/s13233-016-4088-3

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s13233-016-4088-3

Keywords

Search

Navigation