Abstract
A novel polypyrrole nanowires coated by graphene oxide (PPy-NWs/GO) has been successfully synthesized by one-step electrochemical method, whose structure was different from previously reported PPy/GO composites. The microbial fuel cell equipped with PPy-NWs/GO as anode was fabricated and compared with PPy-NWs ones. The SEM images show that the synthesized PPy-NWs/GO materials possess more surface areas than PPy-NWs. The electrochemical analysis indicated that PPy-NWs/GO anode had lower charge transfer resistance, which may be attributed to synergistic effect of them. The MFC equipped with PPy-NWs/GO anode have higher circle voltages and the power density is about 22.3 mW/m2, which is great higher than that of PPy-NWs about 15.9 mW/m2. These improvements of the MFCs may be due to more bacteria on the larger biofilms based on GO nanosheets, indicating that the PPy-NWs/GO is more effective anode for improving electricity generation.
References
Allen MJ, Tung VC, Kaner RB (2010) Honeycomb carbon: a review of graphene. Chem Rev 110(1):132–145. https://doi.org/10.1021/cr900070d
Chen D, Feng HB, Li JH (2012) Graphene oxide: preparation, functionalization, and electrochemical applications. Chem Rev 112(11):6027–6053. https://doi.org/10.1021/cr300115g
Chen Y, Zhao Z, Wang C (2013) Structural and electronic property study of polypyrrole nanowires synthesized by electrochemical method. Nanosci Nanotechnol Lett 5(2):186–190. https://doi.org/10.1166/nnl.2013.1514
Dreyer DR, Park S, Bielawski CW, Ruoff RS (2010) The chemistry of graphene oxide. Chem Soc Rev 39(1):228–240. https://doi.org/10.1039/B917103G
Feng CH, Ma L, Li FB, Mai HJ, Lang XM, Fan SS (2010) A polypyrrole/anthraquinone-2,6-disulphonic disodium salt (PPy/AQDS)-modified anode to improve performance of microbial fuel cells. Biosens Bioelectron 25(6):1516–1520. https://doi.org/10.1016/j.bios.2009.10.009
Gorby YA, Yanina S, McLean JS, Rosso KM, Moyles D, Dohnalkova A, Beveridge TJ, Chang IS, Kim BH, Kim KS, Culley DE, Reed SB, Romine MF, Saffarini DA, Hill EA, Shi L, Elias DA, Kennedy DW, Pinchuk G, Watanabe K, Ishii S, Logan B, Nealson KH, Fredrickson JK (2009) Electrically conductive bacterial nanowires produced by Shewanella oneidensis strain MR-1 and other microorganisms (vol 103, pg 11358, 2006). Proc Natl Acad Sci USA 106(23):9535–9535. https://doi.org/10.1073/pnas.0903426106
Guo YB, Li YL, Li YJ, Liu HB, Li GX, Zhao YJ, Lin HW (2011) Construction of heterojunction nanowires from polythiophene/polypyrrole for applications as efficient switches. Chem Asian J 6(1):98–102. https://doi.org/10.1002/asia.201000400
Hermsdorf N, Stamm M, Forster S, Cunis S, Funari SS, Gehrke R, Muller-Buschbaum P (2005) Self-supported particle-track-etched polycarbonate membranes as templates for cylindrical polypyrrole nanotubes and nanowires: an X-ray scattering and scanning force microscopy investigation. Langmuir 21(25):11987–11993. https://doi.org/10.1021/la0515975
Kumar GG, Sarathi VGS, Nahm KS (2013) Recent advances and challenges in the anode architecture and their modifications for the applications of microbial fuel cells. Biosens Bioelectron 43:461–475. https://doi.org/10.1016/j.bios.2012.12.048
Laviron E (1979) General expression of the linear potential sweep voltammogram in the case of diffusionless electrochemical systems. J Electroanal Chem 101 (1):19–28. https://doi.org/10.1016/s0022-0728(79)80075-3
Luckarift HR, Sizemore SR, Farrington KE, Roy J, Lau C, Atanassov PB, Johnson GR (2012) Facile fabrication of scalable, hierarchically structured polymer/carbon architectures for bioelectrodes. ACS Appl Mater Interfaces 4(4):2082–2087. https://doi.org/10.1021/am300048v
Luo H, Shi Z, Li N, Gu Z, Zhuang Q (2001) Investigation of the electrochemical and electrocatalytic behavior of single-wall carbon nanotube film on a glassy carbon electrode. Anal Chem 73(5):915–920. https://doi.org/10.1021/ac000967l
Lv Z, Chen Y, Wei H, Li F, Hu Y, Wei C, Feng C (2013) One-step electrosynthesis of polypyrrole/graphene oxide composites for microbial fuel cell application. Electrochim Acta 111(Supplement C):366–373. https://doi.org/10.1016/j.electacta.2013.08.022
Mahmoudian MR, Alias Y, Basirun WJ (2012) The electrical properties of a sandwich of electrodeposited polypyrrole nanofibers between two layers of reduced graphene oxide nanosheets. Electrochim Acta 72:53–60. https://doi.org/10.1016/j.electacta.2012.03.137
Marsili E, Baron DB, Shikhare ID, Coursolle D, Gralnick JA, Bond DR (2008) Shewanella secretes flavins that mediate extracellular electron transfer. Proc Natl Acad Sci USA 105(10):3968–3973. https://doi.org/10.1073/pnas.0710525105
Mindroiu M, Ungureanu C, Ion R, Pirvu C (2013) The effect of deposition electrolyte on polypyrrole surface interaction with biological environment. Appl Surf Sci 276:401–410. https://doi.org/10.1016/j.apsusc.2013.03.107
Mustakeem (2015) Electrode materials for microbial fuel cells: nanomaterial approach. Mater Renew Sustain Energy. https://doi.org/10.1007/s40243-015-0063-8
Pumera M (2013) Electrochemistry of graphene, graphene oxide and other graphenoids: review. Electrochem Commun 36:14–18. https://doi.org/10.1016/j.elecom.2013.08.028
Rahimnejad M, Adhami A, Darvari S, Zirepour A, Oh SE (2015) Microbial fuel cell as new technology for bioelectricity generation: a review. Alex Eng J 54(3):745–756. https://doi.org/10.1016/j.aej.2015.03.031
Sanchez DVP, Jacobs D, Gregory K, Huang JY, Hu YS, Vidic R, Yun M (2015) Changes in carbon electrode morphology affect microbial fuel cell performance with Shewanella oneidensis MR-1. Energies 8(3):1817–1829. https://doi.org/10.3390/en8031817
Sun X, Liu Z, Welsher K, Robinson JT, Goodwin A, Zaric S, Dai H (2008) Nano-graphene oxide for cellular imaging and drug delivery. Nano Res 1(3):203–212. https://doi.org/10.1007/s12274-008-8021-8
Wei JC, Liang P, Huang X (2011) Recent progress in electrodes for microbial fuel cells. Bioresour Technol 102(20):9335–9344. https://doi.org/10.1016/j.biortech.2011.07.019
Xie X, Criddle C, Cui Y (2015) Design and fabrication of bioelectrodes for microbial bioelectrochemical systems. Energy Environ Sci 8(12):3418–3441. https://doi.org/10.1039/c5ee01862e
Yuan Y, Kim S (2008) Polypyrrole-coated reticulated vitreous carbon as anode in microbial fuel cell for higher energy output. Bull Korean Chem Soc 29(1):168–172
Zhang F, Yuan SJ, Li WW, Chen JJ, Ko CC, Yu HQ (2015) WO3 nanorods-modified carbon electrode for sustained electron uptake from Shewanella oneidensis MR-1 with suppressed biofilm formation. Electrochim Acta 152:1–5. https://doi.org/10.1016/j.electacta.2014.11.103
Zhou MH, Chi ML, Luo JM, He HH, Jin T (2011) An overview of electrode materials in microbial fuel cells. J Power Sources 196(10):4427–4435. https://doi.org/10.1016/j.jpowsour.2011.01.012
Zhu Y, James DK, Tour JM (2012) New routes to graphene, graphene oxide and their related applications. Adv Mater 24(36):4924–4955. https://doi.org/10.1002/adma.201202321
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
On behalf of all authors, the corresponding author states that there is no conflict of interest.
Electronic supplementary material
Below is the link to the electronic supplementary material.
Rights and permissions
About this article
Cite this article
Li, X., Qian, J., Guo, X. et al. One-step electrochemically synthesized graphene oxide coated on polypyrrole nanowires as anode for microbial fuel cell. 3 Biotech 8, 375 (2018). https://doi.org/10.1007/s13205-018-1321-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s13205-018-1321-0