Abstract
The complexity of damage of plywood makes the prediction of his rupture a very difficult task. Among these predominant damages, we find the delamination which is certainly the most unknown and the most difficult to model. To model this phenomenon, we opted for an empirical method that of design of experiments. This method aims to establish and analyze relationships between the quantities studied and their sources of variation. It allows determining mathematical models of the responses observed as a function of the factors studied. This modeling is deduced from the values obtained by a series of experimental simulations. Obtaining these models requires at first to limit the study to factors and interactions having a significant influence on the responses observed using screening plans. Finally, to determine quantitatively the variations in response with respect to influential factors and interactions identified in a first screening study, we used the response surface methodology.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Avril C (2009) Etude expérimentale et numérique de la résistance interlaminaire en mode I de thermoplastiques à renfort tissé. Philippe OLIVIER et Jacques LAMON. JNC 16, Toulouse (France)
Claudel JB (2002) Caractérisation du comportement mécanique de panneaux de contreplaqué sous sollicitation de flexion et flexion-compression. Université de Metz (France)
Dodge Y (1999) Analyse de régression appliquée. Ed. Paris
Droesbeke JJ, Fine J, Saporta G (1997) Plan d’expériences: Application à l’entreprise. Ed. Technip
Fougerousse M, Barray R, Deon G (1982) Résistance des panneaux contreplaqués à la pourriture: premiers essais sur l’influence de l’épaisseur des plis. Revue Bois et Forêt des Tropiques 197:61–71
Goupy J (1996) La méthode des plans d’expériences: Optimisation du choix des essais et de l’interprétation des résultats. Ed. Dunod
Goupy J (1999) Plan d’expériences pour surface de réponse. Dunod
Johansson E, Kettaneh-Wold N, Wilkström C, Wold S (2000) Design of experiments, Principles and applications. Umetrics
Khuri A, Cornell A (1996) Response surfaces: designs and analysis, 2nd edn. Marcel Dakker, New York
Morais AB (2003) Double cantilever beam testing of multidirectional laminates. Compos Part A Appl Sci Manuf 34:1135–1142
Myers RH, Montgomery DC (1995) Response surface methodology: process and product optimization using designed experiments. Wiley, Hoboken
Pillet M (1994) Introduction aux plans d’expériences par la métho de Taguchi. Les Editions d’Organisation Université
Srinivasaiah HC, Bhat N (2004) Characterization of sub-100 nm CMOS process using screening experiment technique. In: Proceedings 17th International Conference on VLSI Design, India, pp. 285–290
Vandellos T (2011) Vers un modèle de zones cohésives adaptée à l’étude du délaminage dans les composites stratiés. 10e colloque national en calcul des structures. Giens, France
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
EL Moustaphaoui, A., Chouaf, A., Chergui, M. et al. Modeling of macroscopic delamination of plywood using design of experiments method. J Indian Acad Wood Sci 16, 144–154 (2019). https://doi.org/10.1007/s13196-019-00240-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13196-019-00240-1