Abstract
Effects of pore nucleation, growth and solidification mode of matrix on pore structure and distribution of lotus-type porous Cu fabricated by Gasar process were investigated. The results showed that it was difficult to obtain an ordered pore structure when the matrix contained equiaxed grain. An ordered pore structure, with increased pore length and circularity, could be obtained when the matrix consisted of columnar grains. The pore distribution moved from the grain boundaries to the interior of grain with increasing gas pressure. It was further noticed that the average pore diameter decreased and the pore density increased due to decreased activation energy and increased rate of nucleus formation. Due to slight depressions at grain boundaries of the solid/liquid interface, the pore nucleation was favored at grain boundaries and thus the average pore diameter in grain boundaries was larger than that in grains.
Similar content being viewed by others
References
Jiang G R, Study on Hydrogen Solubility in Molten Alloys and Directional Solidification of Porous Cu-Mn Alloy, PhD Thesis, Tsinghua University, Chain (2010).
Li Z J, Jin Q L, Yang T W, Jiang Y H, and Zhou R, ActaMetall Sin., (2013), vol. 49, pp. 757–62.
Jiang G R, Li Y X, and Liu Y, Metall. Mater. Trans., (2010), vol. 41, pp. 3405–11.
Nakajima H, Prog. Mater. Sci., (2007), vol. 52, pp. 1091–73.
Park J S, Hyun S K, Suzuki S, and Nakajima H, Acta Mater. (2007), vol. 55, pp. 6–54.
Shapovalov V I and Boyko L, Adv. Eng. Mater. (2004), vol. 6(6), pp. 407–10.
Ide T, Tane M, and Nakajima H, Mater. Sci. Eng., A (2009), vol. 508(1–2), pp.220–25.
Hyun S K, Nakajima H, and Boyko L V, Mater. Lett. 2004, vol.58(6), pp. 1082–86.
Liu X H, Yao D, Liu X F, and Xie J X, Chin J Nonferrous Met. (2009), vol.19 (7), pp.1237–44.
Huang F, Yang T W, Li Z J,. Li Z H, Jin Q L, and Zhou R, Chin J Nonferrous Met. (2011), vol. 21(3), pp. 604-10.
Chen L T, Zhang H W, Liu Y, and Li Y X, Acta Metall Sin. (2012), vol. 48(3), pp. 329–33.
Ogushi T, Chiba H, Nakajima H, and Ikeda T, J. Appl. Phys. (2004), vol. 95(10), pp. 5843–47.
Drenchev L, Sobczak J, and Malinov S: Gasars: Mater. Sci. Technol. (2006), vol. 22(10), pp. 1135–47.
Xie Z K, Ikeda T, Okuda Y, and Nakajima H, Mater. Sci. Forum. (2004), vol. 61, pp. 449–52.
Zhang H W, Li Y X, and Liu Y, Acta Metall Sin. (2006), vol. 42 (11), pp. 1165–70.
Yamamura S, Shiota H, Murakami K, and Nakajima H, Mater. Sci. Eng. A (2001), pp. 318–37.
Zhang H W, Li Y X, and Liu Y, Acta Metall Sin. (2006) vol. 42(11), pp. 1171–76.
Jiang G R, Liu Y, and Li Y X, Trans.Nonferrous Met. Soci.Chin. 2011, vol. 21, pp. 88–95.
Kurz W, translated by Li J G, and Hu Q D, Fundamentals of Solidification, Higher Education Press, Beijing, 2010, pp. 10.
Zhang H W, and Li Y X, Acta Phys. Sin. 2007, vol. 56(8), pp. 544–51.
Hirth J P, and Pound G M:Condensation and Evaporation: Nucleation and Growth Kinetics, Pergamon Press, Oxford, (1963), pp. 149–161.
Smithells C J:Smithells Metals Reference Book, 7thed,Reed Educational and Professional Publishing Ltd, Boston, (1992), pp. 8–54.
Cui Z Q:Metallurgy and Heat Treatment, China Machine Press, Beijing (2000), pp. 31.
Acknowledgments
This work was supported by the National Science Foundation of China (Grant No. 51164018), and the fund of Yunnan Provincial Department of Education Research (2012Y337).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Song, Q.L., Jin, Q.L., Li, Z.J. et al. Effects of Pore Nucleation, Growth and Solidification Mode on Pore Structure and Distribution of Lotus Type Porous Copper. Trans Indian Inst Met 70, 1437–1445 (2017). https://doi.org/10.1007/s12666-016-0940-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-016-0940-6