Abstract
An integrated analysis of deformation process and failure process was used to investigate the behaviour and mechanism of slope failure. The study involved a series of centrifuge model tests that were performed on the model slope. The parameters considered in this investigation were soil behaviour, slope inclination, and loading condition. Displacement histories were measured accurately throughout the slope and were used to quantify the slope failure process. Initially, the slippage failure occurred near the slope toe; however, the failure increased upwards and eventually caused tension failure in the upper part of the steeper slope. A new concept, shear zone, was introduced to provide a clear description of the shear deformation localisation of the slope. The slip surface of the slope was located in the shear zone that was established prior to slope failure. The size of the shear zone was of the same order of magnitude as that of the slope and can be determined from the macroscopic measurement of displacement. The shear deformation of the shear zone exhibited a significant orientation during loading. On the basis of the concept of shear zone with three features, the slope failure process can be captured and simulated in a macroscopic view.
Similar content being viewed by others
References
Bjerrum L (1967) Progressive failure in slopes of overconsolidated plastic clays and clay-shales. J Soil Mech Found Div 93(5):3–49
Burland JB, Longworth TI, Moore JFA (1977) A study of ground movement and progressive failure caused by a deep excavation in Oxford clay. Geotechnique 27(4):557–591
Cheney JA, Oskoorouchi AM (1982) Physical modeling of clay slopes in the drum centrifuge. Trans Res Rec 872:1–7
Chugh AK (1986) Variable factor of safety in slope stability analysis. Geotechnique 36(1):57–64
Cooper MR, Bromhead EN, Petley DJ, Grants DI (1998) The selborne cutting stability experiment. Geotechnique 48(1):83–101
Hu Y, Zhang G, Zhang JM, Lee CF (2010) Centrifuge modeling of geotextile-reinforced cohesive slopes. Geotext Geomembr 28(1):12–22
Hudacsek P, Bransby MF, Hallett PD, Bengough AG (2009) Centrifuge modelling of climatic effects on clay embankments. Proc ICE-Eng Sustain 162(2):91–100
Kimura T, Takemura J, Sucmasa N, Hiro-oka A (1991) Failure of fills due to rain fall. In: Balkema AA Proc Int Conf Centrifuge 1991. Rotterdam, Netherlands. pp. 509–516
Lade PV, Duncan JM (1976) Stress-path dependent behavior of cohesionless soil. J Soil Mech Found Div 102(GTI):51–68
Law KT, Lumb P (1978) A limit equilibrium analysis of progressive failure in the stability of slopes. Can Geotech J 15:113–122
Li M, Zhang G, Zhang JM, Lee CF (2011) Centrifuge model tests on a cohesive soil slope under excavation conditions. Soils Found 51(5):801–812
Matsui T, San KC (1992) Finite element slope stability analysis by shear strength reduction technique. Soils Found 32(1):59–70
Miao T, Ma C, Wu S (1999) Evolution model of progressive failure of landslides. J Geotech Geoenviron Eng 125(10):827–831
Potts DM, Dounias GT, Vaughan PR (1990) Finite element analysis of progressive failure of Carsington embankment. Geotechnique 40(1):79–101
Potts DM, Kovacevic N, Vaughan PR (1997) Delayed collapse of cut slopes in stiff clay. Geotechnique 47(5):953–982
Skempton AW (1964) Long term stability of clay slopes. Geotechnique 14(2):77–101
Srbulov MM (1995) A simple method for the analysis of stability of slopes in brittle soil. Soils Found 35(4):123–127
Take WA, Bolton MD (2001) The use of centrifuge modelling to investigate progressive failure of overconsolidated clay embankments. Workshop constitutive centrifuge modelling: two extremes, Monte Verita, Switzerland
Thusyanthan NI, Madabhushi SPG, Singh S (2005) Seismic performance of geomembrane placed on a slope in a MSW landfill cell-A centrifuge study. ASCE Geotech Spec Publ 130–142:2841–2852
Ugai K (1989) A method of calculation of total safety factor of slopes by elastoplastic FEM. Soils Found 29(2):190–195
Vaunat J, Leroueil S, Tavenas F (1994) Slope movements: a geotechnical prespective. Proc 7th Congress Int Assoc Eng Geol, Lisbon: 1637–1646
Viswanadham BVS, Rajesh S (2009) Centrifuge model tests on clay based engineered barriers subjected to differential settlements. Appl Clay Sci 42(3–4):460–472
Wang LP, Zhang G (2014) Progressive failure behavior of pile-reinforced clay slopes under surface load conditions. Environ Earth Sci 71(12):5007–5016
Wang LP, Zhang G, Zhang JM (2010) Nail reinforcement mechanism of cohesive soil slopes under earthquake conditions. Soils Found 50(4):459–469
Zhang G, Wang LP (2010) Stability analysis of strain-softening slope reinforced with stabilizing piles. J Geotech Geoenviron Eng 136(11):1578–1582
Zhang G, Hu Y, Zhang JM (2009) New image analysis-based displacement- measurement system for geotechnical centrifuge modeling tests. Measurement 42(1):87–96
Zhang G, Qian JY, Wang R, Zhang JM (2011) Centrifuge modeling study of deformation mechanism of soil slope Bjerrum during rainfall. Soils Found 51(2):297–305
Acknowledgments
The study is supported by State Key Laboratory of Hydroscience and Engineering (No. 2014-KY-1), National Program for Support of Top-notch Young Professionals, and National Natural Science Foundation of China (No. 51129902).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Zhang, G., Hu, Y. & Wang, L. Behaviour and mechanism of failure process of soil slopes. Environ Earth Sci 73, 1701–1713 (2015). https://doi.org/10.1007/s12665-014-3522-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12665-014-3522-0