Abstract
The use of microwave energy in materials processing is a relatively new development presenting numerous advantages because of the rapid heating feature. Microwave technology has great potential to improve the extraction efficiency of metals in terms of both a reduction in required leaching time and an increase in the recovery of valuable metals. This method is especially pertinent in view of the increased demand for environment-friendly processes. In the present study, the influence of microwave heating on the direct leaching of chalcopyrite ores and concentrates were investigated. The results of microwave leaching experiments were compared with those obtained under conventional conditions. During these processes, parameters such as leaching media, temperature, and time have been worked to determine the optimum conditions for proper copper dissolution. Experimental results show that microwave leaching is more efficient than conventional leaching. The optimum leaching conditions for microwave leaching are the solid-to-liquid ratio of 1:100 g/mL, the temperature of 140°C, the solution of 0.5 M H2SO4 + 0.05 M Fe2(SO4)3, and the time of 1 h.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
M. Akdag, Hydrometallurgy: Basic Principles and Applications, Dokuz Eylul University, 1992, p. 88.
M.M. Antonijevi and G.D. Bogdanovi, Investigation of the leaching of chalcopyritic ore in acidic solutions, Hydrometallurgy, 73(2004), p. 245.
J.H. Peng and C.P. Liu, The kinetics of ferric chloride leaching of sphalerite in the microwave field, Trans. Nonferrous Met. Soc. China, 2(1992), p. 46.
C. Saltiel, Z. Fathi, and W. Sutton, Materials processing with microwave energy, Mech. Eng., 117(1995), p.102.
K.E. Haque, Microwave energy for mineral treatment processes: a brief review, Int. J. Miner. Process., 57(1999), p. 1.
M. Al-Harahsheh and S.W. Kingman, Microwave-assisted leaching: a review, Hydrometallurgy, 73(2004), p. 189.
E.M. Córdoba, J.A. Muñoz, M.L. Blázquez, F. González, and A. Ballester, Leaching of chalcopyrite with ferric ion: Part I. General aspects, Hyrdometallurgy, 93(2008), p. 81.
T. Hirato, H. Majima, and Y. Awakura, The leaching of chalcopyrite with ferric sulfate, Metall. Trans. B, 18(1987), p. 489.
T. Yilmaz, I. Alp, H. Deveci, C. Duran, and O. Celep, Ferric sulphate leaching of Kayabasi massive copper ore, J. Sci. Technol. Inst. Dumlupinar Univ., 20(2007), No. 2, p. 63.
R.P. Hackl, D.B. Dreisinger, E. Peters, and J.A. King, Passivation of chalcopyrite during oxidative leaching in sulfate media, Hyrdometallurgy, 39(1995), p. 25.
J.E. Dutrizac and R.J.C. MacDonald, Ferric ion as a leaching medium, Miner. Sci. Eng., 6(1974), p. 59.
J.W. Walkiewicz, G. Kazonich, and S.L. McGill, Microwave heating characteristics of selected minerals and compounds, Miner. Metall. Process., 5(1988), p. 39.
A.S. Vanetsev and Y.D. Tretyakov, Microwave-assisted synthesis of individual and multicomponent oxides, Russ. Chem. Rev., 76(2007), p. 397.
M. Al-Harahsheh, S. Kingman, N. Hankins, C. Somerfield, S. Bradshaw, and W. Louw, The influence of microwaves on the leaching kinetics of chalcopyrite, Miner. Eng., 18(2005), p. 1259.
D. Panias and A. Krestou, Use of microwave energy in metallurgy, [in]_1st International Conference on Advances in Mineral Resources Management and Environmental Geotechnology, Greece, 2004, p. 215.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Onol, K., Saridede, M.N. Investigation on microwave heating for direct leaching of chalcopyrite ores and concentrates. Int J Miner Metall Mater 20, 228–233 (2013). https://doi.org/10.1007/s12613-013-0717-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12613-013-0717-4