Skip to main content
SpringerLink
Log in

Vegetation filtering of waveform terrestrial laser scanner data for DTM production

  • Original Paper
  • Published:
Applied Geomatics Aims and scope Submit manuscript

Abstract

In this article, we present an investigation regarding the differences between a full-waveform and a discrete-return terrestrial laser scanner employed in a survey of a mountain area with dense vegetation. The Riegl LMS-Z620 provides discrete returns whereas the Riegl VZ-400 provides multiple returns with associated width and amplitude of the peaks extracted by online waveform processing. The uncertainty about the stability of the terrain underlying the mountain slope, which was affected by a landslide in 1966, gives a particular importance to an accurate representation of the terrain surface, thus to a robust filtering of the vegetation component. The VZ-400 scans were pre-filtered by exploiting the “calibrated relative reflectance” readings and the multi-target capability provided by this laser scanning system. In the next step, two spatial filters were applied to both georeferenced 3D models in order to eliminate vegetation using an iterative filter and a custom morphological filter. Results show that the use of the iterative morphological filter performs quite well in eliminating the vegetation from both datasets. Vegetation in sloped terrain does still limit the complete removal of the above-ground elements, thus a completely automatic procedure is still not applicable. Stem and canopy growing direction with respect to ground is a factor which should be taken into account in future developments of the procedure. Differences between the two results show that a higher point density is obtained from the VZ-400 due to its multi-return capabilities and the added characteristics extracted from the online waveform processing give added value for filtering more accurately. Results demonstrate that a TLS with multi-target capability can potentially provide a more detailed DTM in presence of dense vegetation.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  • Alba M, Longoni L, Papini M, Roncoroni F, Scaioni M (2005) Feasibility and problems of TLS in modeling rock faces for hazard mapping. In: ISPRS WG III/3, III/4, V/3 Workshop "Laser scanning 2005", Enschede, the Netherlands, September 12–14, 2005, pp. 156–161

  • Axelsson P (1999) Processing of laser scanner data algorithms and applications. ISPRS J Photogramm Remote Sens 54:138–147

    Article  Google Scholar 

  • Barbarella M, Fiani M (2012) Landslide monitoring using terrestrial laser scanner: georeferencing and canopy filtering issues in a case study. Int Arch Photogramm Remote Sens Spatial Inf Sciences Commission V, WG V/3 , E195015

  • Bertacchini E, Capra A, Castagnetti C, Rivola R (2012) Investigating an active rockslide by long-range laser scanner: alignment strategy and displacement identification. In: FIG Working Week 2012 Knowing to manage the territory, protect the environment, evaluate the cultural heritage Rome, Italy, 6–10 May 2012

  • Bitelli G, Gatta G, Landuzzi A, Vittuari L, Zanutta A (2009) La fotogrammetria digitale di archivio per lo studio multitemporale di un’area in frana nelle Prealpi vicentine. In: Proceedings of the 13th Italian National Conference ASITA Bari Italy

  • Castagnetti C, Casula G, Dubbini M, Capra A (2009) Adjustment and transformation strategies of ItalPoS Permanent GNSS Network. Ann Geophys 52(2):181–195

    Google Scholar 

  • Castagnetti C, Bertacchini E, Corsini A, Capra A (2013) Multi-sensors integrated system for landslide monitoring: critical issues in system setup and data management. Eur J Remote Sens 46:104–124. doi:10.5721/EuJRS20134607

    Article  Google Scholar 

  • Chen Y, Medioni G (1992) Object modelling by registration of multiple range images. Image Vis Comput 10(3):145–155

    Article  Google Scholar 

  • Corsini A, Castagnetti C, Bertacchini E, Rivola R, Ronchetti F, Capra A (2013) Integrating airborne and multi-temporal long-range terrestrial laser scanning with total station measurements for mapping and monitoring a compound slow moving rock slide. Earth Surf Process Landf. doi:10.1002/esp.3445

    Google Scholar 

  • Costantino D, Angelini MG (2011). Features and ground automatic extraction from airborne LiDAR data. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences 36, In: ISPRS Workshop Laser Scanning 2011. Calgary, 29–31 August 2011, vol. XXXVIII

  • Doneus M, Pfennigbauer M, Studnicka N, Ullrich A (2009) Terrestrial waveform laser scanning for documentation of cultural heritage. In: Proceedings of the XXIIth CIPA Symposium Kyoto Japan

  • Doneus M, Briese C, Studnicka N (2010) Analysis of full-waveform als data by simultaneously acquired TLS data: towards an advanced DTM generation in wooded areas. In: ISPRS TC VII Symposium – 100 Years ISPRS, Wagner W, Székely B (eds.), Vienna, Austria, July 5–7, 2010, IAPRS, Vol. XXXVIII, Part 7B

  • Godone D, Garnero G (2013) The role of morphometric parameters in Digital Terrain Models interpolation accuracy: a case study. Eur J Remote Sens 46:198–214. doi:10.5721/EuJRS20134611

    Article  Google Scholar 

  • Goshtasby AA (2005) 2-D And 3-D Image Registration: for medical, remote sensing, and industrial applications. Wiley–Interscience

  • Haralick RM, Shapiro LG (1992) Computer and robot vision. Addison-Wesley Longman Publishing Co. Inc, Boston MA USA

    Google Scholar 

  • Hopkinson C (2007) The influence of flying altitude, beam divergence, and pulse repetition frequency on laser pulse return intensity and canopy frequency distribution. Can J Remote Sens 33(4):312–324. doi:10.5589/m07-029

    Article  Google Scholar 

  • Huber D, Hebert M (2003) Fully automatic registration of multiple 3d data sets. Image Vis Comput 21(7):637–650

    Article  Google Scholar 

  • Kraus K, Pfeifer N (2001) Advanced DTM generation from LiDAR data. Int Arch Photogramm Remote Sens Spat Inf Sci 34(3/W4):23–30

    Google Scholar 

  • Lichti DD, Franke J (2005) Self-calibration of the iQsun880 laser scanner. In: Optical 3-D Measurement Techniques VII, Vienna, Austria, Vol. I, pp. 112–121

  • Lichti DD, Gordon S (2004) Error propagation in directly georeferenced terrestrial laser scanner point clouds for cultural heritage recording. Proceedings of FIG Working Week Athens, Greece, May 22–27, 2004

  • Lichti DD, Jamtsho S (2006) Angular resolution of terrestrial laser scanners. Photogramm Rec 2(114):141–160

    Article  Google Scholar 

  • Lichti DD, Licht MG (2006) Experiences with terrestrial laser scanner modelling and accuracy assessment. IAPRS Volume XXXVI, Part 5, Dresden 25–27 September 2006 pp 155–160

  • Lichti DD, Gordon S, Tipdecho T (2005) Error models and propagation in directly georeferenced terrestrial laser scanner networks. J Surv Eng 131(4):135–142

    Article  Google Scholar 

  • Maas HG (2010) Foresty Applications. In: Maas HG VG (ed) Airborne and terrestrial laser scanning. Whittles Publishing, UK

    Google Scholar 

  • Pfennigbauer M, Rieger P, Studnicka N, Ullrich A (2009) Detection of concealed objects with a mobile laser scanning system. In: Laser Radar Technology and Applications XIV, Turner MD, Kamerman GW eds, Proc. of SPIE Vol. 7323, 732308

  • Pirotti F, Grigolato S, Lingua E, Tarolli P, Sitzia T (2012) Laser scanner applications in forest and environmental sciences. Eur J Remote Sens 44(1):109–123. doi:10.5721/ItJRS20124419

    Google Scholar 

  • Pirotti F, Guarnieri A, Vettore A (2013) Ground filtering and vegetation mapping using multi-return terrestrial laser scanning. ISPRS J Photogramm Remote Sens 76:56–63. doi:10.1016/j.isprsjprs.2012.08.003

    Article  Google Scholar 

  • Riegl (2009) Latest News March 2009. Riegl Website. http://www.riegl.com/uploads/tx_pxpriegldownloads/RIEGL_VZ-400_News_03-2009.pdf. Accessed 26 June 2012

  • Riegl (2012) Riegl VZ-400 Product Website. http://www.riegl.com/nc/products/terrestrial-scanning/produktdetail/product/scanner/5/. Accessed: 26 June 2012

  • Roncat A, Wagner W, Melzer T, Ullrich A (2008) Echo detection and localization in full-waveform airborne laser scanner data using the averaged square difference function estimator. Photogramm J Finl 21(1):62–75

    Google Scholar 

  • Roncat A, Bergauer G, Pfeifer N (2011) B-spline deconvolution for differential target cross-section determination in full-waveform laser scanning data. ISPRS J Photogramm Remote Sens 66:418–428

    Article  Google Scholar 

  • Scaioni M (2005) Direct georeferencing of TLS in complex sites. Int Arch Photogramm Remote Sens Spatial Inf Sciences 36: on CDROM

  • Theiler PW, Schindler K (2012) Automatic registration of terrestrial laser scanner point-clouds using natural planar surfaces. ISPRS Ann Photogramm Remote Sens Spatial Inf Sciences , Volume I-3, 2012 XXII ISPRS Congress, 25 August – 01 September 2012, Melbourne, Australia pp 173–178

  • Toth C, Brzezinska D (2007) Airborne laser altimetry: DEM production and feature extraction. In: 5th International Symposium on Mobile Mapping Technology, MMT’07, invited presentation, May 27–30, Padova, Italy

  • Ullrich A, Pfennigbauer M (2011) Echo digitization and waveform analysis in airborne and terrestrial laser scanning. In: Photogrammetric Week 2011, Dieter Fritsch (ed). Stuttgart Germany, pp 217–228

  • Ullrich A, Reichert R (2005) High resolution laser scanner with waveform digitization for subsequent full waveform analysis. In: SPIE Laser Radar Technology and Applications X, Orlando, Florida, USA, pp 82–88

  • Vosselman G (2000) Slope based filtering of laser altimetry data. Int Arch Photogramm Remote Sens Spatial Inf Sciences 33 (Part B3):935–942

    Google Scholar 

  • Wagner W, Ullrich A, Ducic V, Melzer T, Studnicka N (2006) Gaussian decomposition and calibration of a novel small-footprint full-waveform digitising airborne laser scanner. ISPRS J Photogramm Remote Sens 60(2):100–112

    Article  Google Scholar 

Download references

Acknowledgments

Authors wish to thank prof. Gabriele Bitelli and his research team of the Department of Civil, Environmental and Materials Engineering (DICAM) of the University of Bologna (Italy) for the provision of the Riegl VZ-400 laser scanner and the technical support given during the survey.

Author information

Authors and Affiliations

  1. CIRGEO—Interdepartment Research Center for Geomatics, University of Padova, viale dell’Università 16, 35020, Legnaro, PD, Italy

    Francesco Pirotti, Alberto Guarnieri & Antonio Vettore

Authors
  1. Francesco Pirotti
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Alberto Guarnieri
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Antonio Vettore
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Francesco Pirotti.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Pirotti, F., Guarnieri, A. & Vettore, A. Vegetation filtering of waveform terrestrial laser scanner data for DTM production. Appl Geomat 5, 311–322 (2013). https://doi.org/10.1007/s12518-013-0119-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s12518-013-0119-3

Keywords

Search

Navigation