Skip to main content
SpringerLink
Log in

A nanoscopic hydro-thermo-mechanical model for nuclear waste shale/clay repositories

  • Original Paper
  • Published:
Arabian Journal of Geosciences Aims and scope Submit manuscript

Abstract

Shales or highly compacted engineered clay layers are being used as buffers in deep surface nuclear waste repositories. Due to the complex natural structure and fabric of clay and non-clay minerals associated with high in situ stresses, high temperatures, and the practical difficulties in the replication of the field stress and temperature conditions in the lab testing facilities, swell potential from the macro and micro investigations does not provide reliable and universally applicable results. In this study, a comprehensive molecular-level simulation-based volume change constitutive model has been developed for clay minerals incorporating the effects of cation exchange capacity, density, water content, in situ stress state, temperature, exchangeable-cations type and proportion, pore fluids, and the dissolved salts. The molecular simulations were performed using molecular mechanics, molecular dynamics, and Monte Carlo simulation techniques. Comparing the model predictions with the results of the lab tests, the model has been proven to be quite precise in the prediction of the swell potential of these strata under various overburden pressures and temperatures. There is several fold increase in swelling of clay samples at 80 °C as compared to the equivalent specimen tested at 25 °C. The effect of higher temperature is lesser at lower initial water content (higher density) while at higher water content (lower density) the structure has been found to be more vulnerable at higher temperatures. About 100 times higher confining pressure results in the same swell at 80 °C as in its counterpart specimen at 25 °C, the corresponding swell increase factor in case of 50 °C specimens is about 45. A sharp increase in swelling with a drop in in situ pressure emphasizes the probability of higher swell as a result of an accidental reduction in in situ pressure such as the higher concentration of nuclear reactions. In this study, the cohesive energy density (CED) was found to be highly sensitive to various volume change variables, such as water content, density, CEC, type, and percentage of exchangeable and non-exchangeable cations. Contrary to all the previous models, CED-based model developed in this study is universal in nature and can be adopted for any case with minimal basic material input parameters. The good agreement found between the predicted and real values for the swell potential of the undisturbed samples suggests that the model presented here can effectively be used for the assessment of the swelling potential of shale/clay deposits to be used as buffers to the nuclear waste storage.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  • Abduljauwad SN, Al-Sulaimani GJ (1993) Determination of swell potential of Al-Qatif clay. Geotech Test J ASCE 16(4):469–484

    Article  Google Scholar 

  • Abduljauwad SN, Al-Sulaimani GJ, Basunbul IA, Al-Buraim I (1998) Laboratory and field studies of response of structures to heave of expansive clay. Geotechnique 48(1):103–121

    Article  Google Scholar 

  • Ahmed HR (2015). Molecular level modeling of natural and compacted expansive clays. PhD dissertation, Civil Engineering Department, King Fahd University of Petroleum & Minerals (KFUPM), Dhahran, Saudi Arabia

  • Ahmed HR, Abduljauwad SN, Akram T (2007) Geotechnical behavior of oil-contaminated fine-grained soils. Electron J Geotech Eng 12(A)

  • Al-Bazali T, Zhang J, Chenevert ME, Sharma MM (2008) Factors controlling the compressive strength and acoustic properties of shales when interacting with water-based fluids. Int J Rock Mech Min 45(5):729–738

    Article  Google Scholar 

  • Alonso EE, Gens A, Josa A (1990) A constitutive model for partially saturated soil. Géotechnique 40(3):405–430

    Article  Google Scholar 

  • Arnott RJ (1965) Particle sizes of clay minerals by small-angle x-ray scattering. Am Mineral 50:1563–1575

    Google Scholar 

  • ASTM (2010) D4318: standard test methods for liquid limit, plastic limit, and plasticity index of soils. ASTM International, West Conshohocken

    Google Scholar 

  • ASTM (2012) D1557: standard test methods for laboratory compaction characteristics of soil using modified effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)). ASTM International, West Conshohocken

    Google Scholar 

  • ASTM (2014) D4546: standard test methods for one-dimensional swell or collapse of soils. ASTM International, West Conshohocken

    Google Scholar 

  • Baldi G, Hueckel T, Pellegrini R (1988) Thermal volume change of the mineral-water system in low-porosity clay soils. Can Geotech J 25:807–825

    Article  Google Scholar 

  • Belanteur N, Tacherifet S, Pakzad M (1997) Étude des comportements mécanique, themo-mécanique et hydro-mécanique des argiles gonflantes et non gonflantes fortement compactées. Rev Fr Géotech 78:31–50

    Article  Google Scholar 

  • Brunauer S, Emmett PH, Teller E (1938) Adsorption of gases in multimolecular layers. J Am Chem Soc 60:309–319

    Article  Google Scholar 

  • Bucher, F. & Mayor, P.A. (1989). Medium-scale experiments on highly-compacted bentonites. Proceedings of the 12th International Conference on Soil Mechanics and Foundation Engineering, Rio de Janeiro, Brazil, 1:583-585

  • Burghignoli A, Desideri A, Miliziano S (2000) A laboratory study on the thermomechanical behaviour of clayey soils. Can Geotech J 37:764–780

    Article  Google Scholar 

  • Campanella RG, Mitchell JK (1968) Influence of temperature variations on soil behavior. J Soil Mech Found Div ASCE 94:709–734

    Google Scholar 

  • Cekerevac C, Laloui L (2004) Experimental study of thermal effects on the mechanical behaviour of a clay. Int J Numer Anal Methods Geomech 28(3):209–228

    Article  Google Scholar 

  • Chenevert ME (1970) Shale alteration by water adsorption. J Pet Technol 22(09):1141–1148

    Article  Google Scholar 

  • Clay Minerals Society (2013) Source clays physical/chemical data. http://www.clays.org/SOURCE%20CLAYS/SCdata.html

  • Cui YJ, Yahia-Aissa M, Delage P (2002) A model for the volume change behaviour of heavily compacted swelling clays. Eng Geol 64:233–250

    Article  Google Scholar 

  • Cuisinier O, Masrouri F (2004) Testing the hydromechanical behavior of a compacted swelling soil. Geotech Test J 27(6):598–606

    Google Scholar 

  • De Bruyn D, Thimus JF (1996) The influence of temperature on mechanical characteristics of Boom clay: the results of an initial laboratory program. Eng Geol 41:117–226

    Article  Google Scholar 

  • Del Olmo C, Fioravante V, Gera F, Hueckel T, Mayor JC, Pellegrini R (1996) Thermomechanical properties of deep argillaceous formations. Eng Geol 41:87–101

    Article  Google Scholar 

  • Delage P, Howat MD, Cui YJ (1998) The relationship between suction and swelling properties in a heavily compacted unsaturated clay. Eng Geol 50:31–48

    Article  Google Scholar 

  • Demars KR, Charles RD (1982) Soil volume changes induced by temperature cycling. Can Geotech J 19:188–194

    Article  Google Scholar 

  • Eberl DD, Drits VA, Srodon J (1998) Deducing growth mechanisms for minerals from the shapes of crystal size distributions. Am J Sci 298:499–533

    Article  Google Scholar 

  • Fereidooni D (2016) Determination of the geotechnical characteristics of Hornfelsic rocks with a particular emphasis on the correlation between physical and mechanical properties. Rock Mech and Rock Eng 49:2595–2608

    Article  Google Scholar 

  • Fereidooni D (2017) Influence of discontinuities and clay minerals in their filling materials on the instability of rock slopes. Geomech Geoeng. https://doi.org/10.1080/17486025.2017.1309080

  • Habibagahi K (1977) Temperature effect and the concept of effective void ratio. In Geotech J 1:14–34

    Google Scholar 

  • Hameed RA (1991) Characterization of expansive soils in the Eastern Province of Saudi Arabia. MS Thesis, KFUPM, Dhahran, Saudi Arabia

  • Hueckel T, Baldi G (1990) Thermoplasticity of saturated clays: experimental constitutive study. J Geotech Eng 116(12):1778–1796

    Article  Google Scholar 

  • Ichikawa Y, Kawamura K, Fuji N, Nattavut T (2002) Molecular dynamics and multiscale homogenization analysis of seepage-diffusion problem in bentonite clay. Int J Num Methods Eng 54:1717–1749

    Article  Google Scholar 

  • Jonas EC and Oliver RM (1967) Size and shape of montmorillonite crystallites. In a Proceedings of the Fifteenth Conference, Clays and Clay Minerals: Pittsburg, Pennsylvania, Clay Minerals Society, S. W. Oxford 1967:27–33

  • Karaborni S, Smit B, Heidug W, Urai E, van Oort (1996) The swelling of clays: molecular simulations of the hydration of montmorillonite. Science 271:10–15

    Article  Google Scholar 

  • Katti DR, Schmidt S, Ghosh P, Katti KS (2005) Modeling response of pyrophyllite clay interlayer to applied stress using steered molecular dynamics. Clay Clay Miner 52(2):171–178

    Article  Google Scholar 

  • Katti DR, Matar MI, Katti KS, Amarasinghe PM (2009) Multiscale modeling of swelling clays: a computational and experimental approach. KSCE J Civ Eng 13(4):243–255

    Article  Google Scholar 

  • Khanlari GR, Heidari M, Sepahi-Gero AA, Fereidooni D (2014) Determination of geotechnical properties of anisotropic rocks using some index tests. Geotech Test J 37(2):1–13

    Article  Google Scholar 

  • Komine H, Ogata N (1994) Experimental study on swelling characteristics of compacted bentonite. Can Geotech J 31:487–490

    Article  Google Scholar 

  • Kuntiwattanakul P, Towhata I, Ohishi K, Seko I (1995) Temperature effects on undrained shear characteristics of clay. Soil Found 35(1):147–162

    Article  Google Scholar 

  • Laloui L (2001) The thermo-mechanical behaviour of soils. Revue Française de Génie Civil 5(6):809–843

    Article  Google Scholar 

  • Lloret A, Villar MV, Sanchez M, Gens A, Pintado X, Alonso EE (2003) Mechanical behaviour of heavily compacted bentonite under high suction changes. Géotechnique 53(1):27–40

    Article  Google Scholar 

  • Lyu Q, Ranjith PG, Long X, Kang Y, Huang M (2015) A review of shale swelling by water adsorption. J Nat Gas Sci Eng 27:1421–1431

    Article  Google Scholar 

  • Marinkovic B, de Avillez RR, Saavedra A, Assuncao FCR (2001) A comparison between the Warren-Averbach method and alternate methods for X-ray diffraction microstructure analysis of polycrystalline specimens. Mat Res 4(2):23–27

    Article  Google Scholar 

  • Materials Studio v7.0 (2013) Accelrys Software Inc., US

  • Nadeau PH, Tait JM, McHardy WJ, Wilson MJ (1984) Interstratified XRD characteristics of physical mixtures of elementary clay particles. Clay Miner 19:67–76

    Article  Google Scholar 

  • Nanoscale Simulation Lab at University of Akron, US (2013) (http://bionano.uakron.edu/the-interface-force-field)

  • Rayment GE and Higginson FR (1992) Australian laboratory handbook of soil and water chemical methods. Inkata, ISBN 0 909605 68 8

  • Scherrer P (1918) Bestimmung der Grösse und der inneren Struktur von Kolloidteilchen mittels Röntgenstrahlen. Nachr Ges Wiss Göttingen 26:98–100

    Google Scholar 

  • Simic V and Uhlik P (2006) Crystallite size distribution of clay minerals from selected Serbian clay deposits. Annales Geologiques De La Peninsule Balkanique, Belgrade 2006, 67:109–116

  • Skipper NT, Sposit G, Chang FR (1995a) Monte Carlo simulations of interlayer molecular structure in swelling clay minerals 1. Methodology. Clay Clay Miner 43(3):285–293

    Article  Google Scholar 

  • Skipper NT, Sposito G, Chang FR (1995b) Monte Carlo simulations of interlayer molecular structure in swelling clay minerals 1. Monolayer hydrates. Clay Clay Miner 43(3):294–303

    Article  Google Scholar 

  • Stephens, M, Gomez-Naza, S, and Churan, M 2009. Laboratory methods to assess shale reactivity with drilling fluids. National Technical Conference and Exhibition, New Orleans, Louisiana 1–7

  • Sucha V, Karus I, Samajova E, Puskelova L (1999) Crystallite size distribution of kaolin minerals. Int J Mineral Crystallography Geochem Ore Deposits Petrol Volcanol appl topics Environ Archaeometry Cult Herit 68(1):81–92

    Google Scholar 

  • Sultan N, Delage P, Cui YJ (2002) Temperature effects on the volume change behaviour of Boom clay. Eng Geol 64:135–145

    Article  Google Scholar 

  • Tang A-M, Cui Y-J, Barnel N (2008) Thermo-mechanical behaviour of a compacted swelling clay. Géotechnique 58(1):45–54

    Article  Google Scholar 

  • Tao L, Xiao-Feng T, Yu Z, Tao G (2010) Swelling of K+, Na+ and Ca2+-montmorillonites and hydration of interlayer cations: a molecular dynamics simulation. Chin Phys B 19(10):50–55

    Article  Google Scholar 

  • Towhata I, Kuntiwattanakul P, Seko I, Ohishi K (1993) Volume change of clays induced by heating as observed in consolidation tests. Soils Found 33(4):170–183

    Article  Google Scholar 

  • Uhlik P, Sucha V, Eberl DD, Puskelova L, Caplovicova M (2000) Evolution of pyrophyllite particle sizes during dry grinding. Clay Miner 35:423–432

    Article  Google Scholar 

  • Zhang, J., Chenevert, M.E., Al-Bazali, T., Sharma, M.M., 2004 A new gravimetric swelling test for evaluating water and ion uptake in shales

  • Zhou, ZH, Huang, RZ, Chen, YF. 1992. Constitutive equations of shale and clay swelling: theoretical model and laboratory test under confining pressure. SPE International Meeting on Petroleum Engineering held in Beijing, China, 24–27 March 1992

Download references

Author information

Authors and Affiliations

  1. Civil and Environmental Engineering Department, King Fahd University of Petroleum & Minerals (KFUPM), Dhahran, Saudi Arabia

    H. R. Ahmed & S. N. Abduljauwad

  2. Engineering & Research International (ERI), Riyadh, Saudi Arabia

    H. R. Ahmed

Authors
  1. H. R. Ahmed
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. N. Abduljauwad
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to H. R. Ahmed.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Ahmed, H.R., Abduljauwad, S.N. A nanoscopic hydro-thermo-mechanical model for nuclear waste shale/clay repositories. Arab J Geosci 10, 448 (2017). https://doi.org/10.1007/s12517-017-3234-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12517-017-3234-3

Keywords

Search

Navigation