Abstract
When an underwater tunnel constructed via the mining method crosses a fault fracture zone, one of the most important issues to consider is ensuring the stability of its face. Several auxiliary techniques have been adopted in construction; however, the design parameters of these auxiliary measures are mainly determined by experience. In this study, a stability analysis model of the working face of an underwater tunnel constructed via mining method in a fractured zone was established by considering the effect of groundwater seepage force. Afterward, the corresponding formula was determined. By considering a pre-support pipe roof and an advanced grouting ring as a beam on the elastic foundation, the corresponding stability analysis model and computing method under pre-reinforced condition were built. In addition, an engineering example was analyzed. Results show that the stability coefficient of the tunnel face is only 0.77 without the pipe roof and advanced grouting. Meanwhile, the stability coefficient increases to 2.47 under pre-reinforced condition. This finding indicates that a tunnel must be reinforced in advance in a fractured zone to ensure safe construction. The influences of pre-reinforcement parameters (i.e., thickness, cohesion, and internal friction angle of the grouting circle) on the stability of the tunnel face are discussed at the end of the article.
Similar content being viewed by others
References
Anagnostou G, Ehrbar H (2013) Auxiliary measures in tunneling. Geomech Tunnelbau 6(3):186
Anagnostou G, Kovári K (1996) Face stability conditions with earth-pressure-balanced shields. Tunn Undergr Space Technol 11:165–173
Anagnostou G, Zingg S (2013) On the stabilizing effect of advance drainage in tunneling. Geomech Tunnelbau 6(4):338–354
Blindheim OT, Eivind G, Nilsen B (2005) Nordic subsea tunnel projects. Tunn Undergr Space Technol 20:570–580
Broere W (1998) Face stability calculation for a slurry shield in heterogeneous soft soils. Tunnels and Metropolises, 215–218
Broms BB, Bennermark H (1967) Stability of clay at vertical openings. J Soil Mech Found Div 96(1):71–94
Chen RP, Tang LJ, Ling DS, Chen YM (2011) Face stability analysis of shallow shield tunnels in dry sandy ground using the discrete element method. Comput Geotech 38:187–195
Comejo L (1989) Instability at the face: its repercussions for tunneling technology. Tunnels Tunneling 21:69–74
Davis EH, Gunn MJ, Mair RJ et al (1980) The stability of shallow tunnels and underground openings in cohesive material. Geotechnique 30(4):397–416
Dias D, Oreste P (2013) Key factors in the face stability analysis of shallow tunnels. Am J Appl Sci 10(9):1025–1038
Holter KG, Hognestad HO (2010) Advantages of pre-injection grouting. Tunnels Tunnelling Int 10:49–53
Horn N (1961) Horizontaler erddruck auf senkrechte abschlussflachen von tunnelrohren. Landeskonferenz der ungarischen tiefbauindustrie. Deutsche Uberarbeitung durch STUVA, Dusseldorf, 7–16
Huang Y, He F-s (2005) Beam, plate and shell in elastic foundation. Scientific Publishing House, Beijing, pp 36–40 (in Chinese)
Kim SH, Tonon F (2010) Face stability and required support pressure for TBM driven tunnels with ideal face membrane-drained case. Tunn Undergr Space Technol 25:526–542
Kirsch A (2010) Experimental investigation of the face stability of shallow tunnels in sand. Acta Geotech 5:43–62
Leca E, Dormieux L (1990) Upper and lower bound solutions for the face stability of shallow circular tunnels in frictional material. Geotechnique 40:581–606
Lee I-M, Nam S-W (2001) The study of seepage forces acting on the tunnel lining and tunnel face in shallow tunnels. Tunn Undergr Space Technol 16:31–40
Lee I-M, Nam S-W (2004) Effect of tunnel advance rate on seepage forces acting on the underwater tunnel face. Tunn Undergr Space Technol 19:273–281
Lee I-M, Seok-Woo N, Ahn J-H (2003) Effect of seepage forces on tunnel face stability. Can Geotech J 40:342–350
Lv X-l, Wang H-r, Huang M-s (2010) Limit theoretical study on face stability of shield tunnels. Chin J Geotech Eng 33(1):57–62 (in Chinese)
Mollon G, Dias D, Soubra AH (2010) Face stability analysis of circular tunnels driven by a pressurized shield. J Geotech Geoenviron Eng ASCE 136(1):215–229
Nilsen B (1994) Analysis of potential cave-in from fault zones in hard rock subsea tunnels. Rock Mech Rock Eng 27(2):63–75
Nilsen B (2011) Cases of instability caused by weakness zones in Norwegian tunnels. Bull Eng Geol Environ 70:7–13
Oreste PP, Dias D (2012) Stabilisation of the excavation face in shallow tunnels using fibreglass dowels. Rock Mech Rock Eng 45:499–517
Peila D (1994) A theoretical study of reinforcement influence on the stability of a tunnel face. Geotech Geol Eng 12:145–168
Pelizza S, Peila D (1993) Soil and rock reinforcements in tunnelling. Tunn Undergr Space Technol 8:357–372
Perazzelli P, Anagnostou G (2013) Stress analysis of reinforced tunnel faces and comparison with the limit equilibrium method. Tunn Undergr Space Technol 38:87–98
Salvador S, Mollon G, Jimenez R (2013) Tunnel face stability in heavily fractured rock masses that follow the Hoek–Brown failure criterion. Int J Rock Mech Min Sci 60:440–451
Tonon F (2011) ADECO full-face tunnel excavation of two 260 m2 tubes in clays with sub-horizontal jet-grouting under minimal urban cover. Tunn Undergr Space Technol 26:253–266
Tsuji H, Sawada T, Takizawa M (1996) Extraordinary inundation accidents in the Seikan undersea tunnel. Int J Rock Mech Min Sci Geomech Abstr 119(1):1–14
Acknowledgments
Funds from the National Basic Research Program of China (2011CB013802) and Studying Abroad Foundation of China ([2013]3018) are gratefully acknowledged. In addition, I wish to thank Professor Jian Zhao at Monash University for his valuable suggestion on this study and Monash University for providing good condition for this work.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shi, C., Cao, C., Lei, M. et al. Face stability analysis of shallow underwater tunnels in fractured zones. Arab J Geosci 9, 24 (2016). https://doi.org/10.1007/s12517-015-2040-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12517-015-2040-z